39 390-038 Submersible EMI/RFI Cable Sealing Backshell with Strain Relief Type G - Direct Coupling - Low Profile 390 F S 038 M 16 10 E 6 CONNECTOR DESIGNATORS * Product Series A-B -C-D-E-F G-H-J-K-L-S Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Connector Designator Strain Relief Style (C, E) Angle and Profile A = 90 B = 45 S = Straight * Conn. Desig. B See Note 5 DIRECT COUPLING TYPE G INDIVIDUAL AND/OR OVERALL SHIELD TERMINATION Cable Entry (Tables X, XI) Shell Size (Table I) Basic Part No. Finish (Table II) 1.250 (31.8) Max Length ± .060 (1.52) Min. Order Length 1.5 Inch (See Note 3) A Thread (Table I) O-Rings B (Table I) J E (Table III) (Table IV) F (Table IV) B (Table I) J G (Table III) (Table IV) B (Table I) 1.680 (42.7) Ref. H (Table IV) 1.680 (42.7) Ref. STYLE C Medium Duty (Table X) Clamping Bars T Cable Range © 2005 Glenair, Inc. STYLE E Medium Duty (Table XI) X (See Note 4) Y Cable Range W CAGE Code 06324 Z Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 39 - Page 80 www.glenair.com 39 390-038 Submersible EMI/RFI Cable Sealing Backshell with Strain Relief Type G - Direct Coupling - Low Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 28/29 32/33 36 40 TABLE III: FRONT ADAPTER J Max - Conn. Designator A-E-F D-B-G-K J-H-L-S C 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.735 (44.1) 1.180 (30.0) 1.250 (31.8) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 2.190 (55.6) 1.915 (48.6) Dash No. 03 04 06 08 10 12 16 20 24 28 32 Dash No. 03 04 06 08 10 12 16 20 24 28 32 T Max 1.219 (31.0) 1.219 (31.0) 1.219 (31.0) 1.219 (31.0) 1.281 (32.5) 1.281 (32.5) 1.406 (35.7) 1.656 (42.1) 1.906 (48.4) 1.906 (48.4) 2.000 (50.8) Y Max .739 (18.8) .739 (18.8) .739 (18.8) .739 (18.8) .791 (20.1) .880 (22.4) .901 (22.9) 1.031 (26.2) 1.250 (31.8) 1.250 (31.8) 1.312 (33.3) © 2005 Glenair, Inc. Dash E No. Max 03 .500 (12.7) 04 .500 (12.7) 06 .590 (15.0) 08 .610 (15.5) 10 .700 (17.8) 12 .880 (22.4) 16 .970 (24.6) 20 1.120 (28.4) 24 1.220 (31.0) 28 1.570 (39.9) 32 1.770 (45.0) W Max .812 (20.6) .937 (23.8) 1.062 (27.0) 1.188 (30.2) 1.312 (33.3) 1.562 (39.7) 1.750 (44.5) 2.250 (57.2) 2.375 (60.3) 2.625 (66.7) 2.812 (71.4) TABLE X X Ref .135 (3.4) .203 (5.2) .285 (7.2) .350 (8.9) .390 (9.9) .460 (11.7) .510 (13.0) .695 (17.7) .715 (18.2) .915 (23.2) 1.070 (27.2) TABLE F Max 1.250 (31.8) 1.610 (40.9) 1.730 (43.9) 1.750 (44.5) 1.820 (46.2) 2.080 (52.8) 2.190 (55.6) 2.190 (55.6) 2.360 (59.9) 2.610 (66.3) 2.780 (70.6) G Max .520 (13.2) .520 (13.2) .580 (14.7) .640 (16.3) .730 (18.5) .920 (23.4) 1.020 (25.9) 1.040 (26.4) 1.040 (26.4) 1.090 (27.7) 1.180 (30.0) H Max 1.140 (29.0) 1.170 (29.7) 1.650 (41.9) 1.720 (43.7) 1.800 (45.7) 1.910 (48.5) 2.100 (53.3) 2.250 (57.2) 2.300 (58.4) 2.400 (61.0) 2.600 (66.0) Cable Range Max Min .219 (5.6) .156 (4.0) .312 (7.9) .188 (4.8) .438 (11.1) .281 (7.1) .531 (13.5) .312 (7.9) .625 (15.9) .375 (9.5) .750 (19.1) .500 (12.7) .938 (23.8) .625 (15.9) 1.250 (31.8) .938 (23.8) 1.375 (34.9) 1.000 (25.4) 1.625 (41.3) 1.250 (31.8) 1.875 (47.6) 1.500 (38.1) TABLE XI Cable Range Z Max Max Min .219 (5.6) .812 (20.6) .156 (4.0) .312 (7.9) .937 (23.8) .188 (4.8) .438 (11.1) 1.062 (27.0) .281 (7.1) .531 (13.5) 1.188 (30.2) .312 (7.9) .625 (15.9) 1.312 (33.3) .375 (9.5) .750 (19.1) 1.562 (39.7) .500 (12.7) .938 (23.8) 1.750 (44.5) .625 (15.9) 1.250 (31.8) 2.250 (57.2) .938 (23.8) 1.375 (34.9) 2.375 (60.3) 1.000 (25.4) 1.625 (41.3) 2.625 (66.7) 1.250 (31.8) 1.875 (47.6) 2.812 (71.4) 1.500 (38.1) CAGE Code 06324 IV 1. Metric dimensions (mm) are indicated in parentheses. 2. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 3. Consult factory for shorter lengths on straight backshells. 4. Saddles are bottomed on Clamp Ears. 5. When using Connector Designator B refer to pages 18 and 19 for part number development. Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 39 - Page 81 www.glenair.com