EMI Shielding Accessories 319-064 Self-Locking Rotatable Coupling Composite Swing-Arm Strain Relief with Nickel/Copper EMI/RFI Shield Sock & Optional Split Ring Connector Designator F, H, A CONNECTOR DESIGNATOR: A - MIL-DTL-5015 / -26482 / -83723 F - MIL-DTL-38999 Series I, II H - MIL-DTL-38999 Series III and IV SELF-LOCKING Product Series 319 - A - 064 - XO ROTATABLE COUPLING A Thread (Typ) R Configuration and Band Termination R - Split Ring (687-207) and Band ((600-052) Supplied (Omit if Not Required) U.S. PATENT NO. 6419519 12.0 (304.8) Min J Captivated Self-Locking Telescoping Screws (Typ) G K B (Typ) (Typ) D F (Typ) E (Typ) Closed Straight Position H Flats (Typ) 16 Finish (See Table II) Anti-Rotation Device (Typ) EMI Shroud (Typ) Shell Size (See Table I) Basic Number Shield I.A.W. 107-030 Nickel/Copper Captive PositionScrew locks Swing Arm in 45° increments (See Notes 2, 3) .062 (1.8) Min .250 (6.4) Max Screw Protrusion (Typ) 90° Position 45° Position (See Note 2) Screw Head same side (Typ) Optional Split RingP/N 687-207 (Page H-16) Metric dimensions (mm) are in parentheses and are for reference only. H © 2008 Glenair, Inc. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] H-6 www.glenair.com EMI Shielding Accessories 319-064 Self-Locking Rotatable Coupling Composite Swing-Arm Strain Relief with Nickel/Copper EMI/RFI Shield Sock & Optional Split Ring See Page H-2 for Table I: Backshell Interface Dimensions TABLE I: CONNECTOR SHELL SIZE ORDER NUMBER Shell Size for Connector Designator* A F H 08 08 09 10 10 11 12 12 13 14 14 15 16 16 17 18 18 19 20 20 21 22 22 23 24 24 25 B Dia Max .812 (20.6) .938 (23.8) 1.125 (28.6) 1.250 (31.8) 1.375 (34.9) 1.500 (38.1) 1.625 (41.3) 1.750 (44.5) 1.875 (47.6) D Max .980 (24.9) 1.050 (26.7) 1.200 (30.5) 1.300 (33.0) 1.440 (36.6) 1.560 (39.6) 1.690 (42.9) 1.770 (45.0) 1.890 (48.0) F Min .220 (5.9) .270 (6.9) .350 (8.9) .470 (11.9) .550 (14.0) .620 (15.7) .700 (17.8) .780 (19.8) .850 (21.6) E ±.06 (1.5) .265 (6.7) .310 (7.9) .390 (9.9) .506 (12.9) .591 (15.0) .661 (16.8) .744 (18.9) .826 (21.0) .896 (22.8) G H Flats Max Max Min .750 (19.1) .736 (18.7) 1.060 (26.9) 1.090 (27.7) .875 (22.2) .860 (21.8) 1.000 (25.4) .980 (24.9) 1.180 (30.0) 1.125 (28.6) 1.100 (27.9) 1.240 (31.5) 1.250 (31.8) 1.224 (31.1) 1.320 (33.5) 1.375 (34.9) 1.469 (37.3) 1.390 (35.3) 1.500 (38.1) 1.500 (38.1) 1.550 (39.4) 1.625 (41.3) 1.581 (40.2) 1.550 (39.4) 1.750 (44.5) 1.960 (49.8) 1.610 (40.9) J ±.06 (1.5). 940 (23.9) .970 (24.6) 1.030 (26.2) 1.090 (27.7) 1.120 (28.4) 1.150 (29.2) 1.180 (30.0) 1.250 (31.8) 1.280 (32.5) K Ref .265 (6.7) .370 (9.4) .506 (12.9) .580 (14.7) .705 (17.9) .784 (19.9) .909 (23.1) 1.034 (26.3) 1.149 (29.2) TABLE II: FINISHES Symbol Finish XB Composite Material, No Plating, Color Black, Brass Interface Shroud and Adapter - Nickel Plated XMT* Ni-PTFE 1000 Hour GreyTM (Nickel-Fluorocarbon Polymer XN Composite Material, No Plating, Color Black and Brown, Brass Interface Shroud and Adapter Selectively Cadmium Plated XO Composite Material, No Plating, Color Black and Brown, Brass Interface Shroud and Adapter Nickel Plated XW* Cadmium Olive Drab over Electroless Nickel * Note: Coupling Nut, Saddle Bars and Arms supplied unplated. APPLICATION NOTES 1. Glenair series 600 Backshell assembly Tools are recommended for assembly and installation. 2. Swing Arm locks in 45° increments–Sizes 08 thru 24, additional positioning increments are manufacturer's option. 3. Captive Screw remains engaged to the body when positioning the Arm. When tightened, the Screw shall not protrude into the inside surfaces. 4. Fits Connector Designators: MIL-DTL-38999 Series I, II (F), MIL-DTL-38999 Series III and IV (H), MIL-DTL-5015 (A), and MIL-DTL-26482 (A) H Metric dimensions (mm) are in parentheses and are for reference only. © 2008 Glenair, Inc. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] H-7 www.glenair.com