Composite Backshells 627-122 Composite Swing-Arm Strain Relief with Self-Locking Rotatable Coupling Product Series 627 - Swing-Arm Strain Relief CONNECTOR DESIGNATOR: A A MIL-DTL-5015, -26482 Series II, and -83723 Series I and III F H MIL-DTL-38999 Series I, II 627 MIL-DTL-38999 Series III and IV 122 Connector Designator A, F and H SELF-LOCKING B A ROTATABLE COUPLING Dash Number (See Table II) Basic Part Number XO 16 Finish Symbol (See Table III) LOW PROFILE Self-Locking Coupling J G C Captivated Self-Locking Telescoping Screws (Typ) D F (Typ) E (Typ) Closed D .062 (1.6) Min .250 (6.4) max Screw Protrusion (Typ) Straight Position 90° Position Shown E F 45° Position Shown Captive Position Screw locks Swing Arm in 45° increments (Notes 2, 3) (Note 2) Position Indicators Screw Head Same Side (Typ) U.S. PATENT NO. 6419519 G © 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-98 Composite Backshells 627-122 Composite Swing-Arm Strain Relief with Self-Locking Rotatable Coupling TABLE II: CONNECTOR SHELL SIZE ORDER NUMBER Shell Size for Connector Designator* A F H 08 08 09 10 10 11 12 12 13 14 14 15 16 16 17 18 18 19 20 20 21 22 22 23 24 24 25 E ±.06 (1.5) .265 (6.7) .310 (7.9) .390 (9.9) .506 (12.9) .591 (15.0) .661 (16.8) .744 (18.9) .826 (21.0) .896 (22.8) F Min .220 (5.9) .270 (6.9) .350 (8.9) .470 (11.9) .550 (14.0) .620 (15.7) .700 (17.8) .780 (19.8) .850 (21.6) G Max 1.060 (26.9) 1.090 (27.7) 1.180 (30.0) 1.240 (31.5) 1.320 (33.5) 1.390 (35.3) 1.550 (39.4) 1.550 (39.4) 1.610 (40.9) H Max .980 (24.9) 1.050 (26.7) 1.200 (30.5) 1.300 (33.0) 1.440 (36.6) 1.560 (39.6) 1.690 (42.9) 1.770 (45.0) 1.890 (48.0) J ±.03 .880 .910 .950 1.010 1.050 1.080 1.120 1.160 1.200 A 0.8 (22.4) (23.1) (24.1) (25.7) (26.7) (30.0) (28.4) (29.5) (30.5) B C TABLE III: FINISH Symbol Finish Description XB No Plating - Black Color (Non-Conductive Finish) XO No Plating - Brown Color (Non-Conductive Finish) D E APPLICATION NOTES 1. 2. 3. © 2009 Glenair, Inc. Metric dimensions (mm) are in parentheses and are for reference only. Glenair series 600 Backshell assembly Tools are recommended for assembly and installation. Swing Arm locks in 45° increments– Sizes 08 thru 24, additional positioning increments are manufacturer's option. 4. 5. 6. 7. Captive Screw can remain engaged to the body when positioning the Arm. When tightened, the Screw shall not protrude into the inside surfaces. Coupling nut supplied unplated. Consult factory for additional entry sizes available. See Table I in Intro for front-end dimensional details. CAGE Code 06324 F Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-99 G