Series 804 Series 804 “Mighty Mouse” Push-Pull Quick-Disconnect Series 804 Plug Connectors A Quick Disconnect These plugs snap securely into receptacle housings and release with a simple pull. B Two Keying Styles: A single master key provides fast mating in low-light situations, or specify three keys for more polarizing options. C Two Shell Styles: Integral platform for direct shield attachment using the BAND-IT® termination system, or an accessory thread for attaching a strain relief. Series 804 Plug Connector D HOW TO ORDER Sample Part Number E 804-001 -06 M 9-19 S Series Shell Style Shell Material / Finish Shell Size- Insert Arrangement Contact Type Shell Key Position Standard #23 contacts accept #22 through #28 AWG wire. Use the following contact codes to specify these contacts: for Single Master Key F G -06 C Plug Aluminum / Black Anodize M 804-001 Plug with Banding Platform Aluminum / Electroless Nickel NF Aluminum / Cadmium with Olive Drab Chromate H ZN 804-002 J Plug with Accessory Thread Aluminum / ZincNickel with Olive Drab Chromate 3 #23 Contacts 1 #16 Contact 4 #23 Contacts 7 #23 Contacts 1 #12 Contact 10 #23 Contacts 13 #23 Contacts 4 #16 Contacts 19 #23 Contacts 26 #23 Contacts 2 #12 Contacts 37 #23 Contacts 55 #23 Contacts 85 #23 Contacts ZNU Aluminum / ZincNickel with Black Chromate K 5-3 6-1 6-4 6-7 7-1 7-10 8-13 9-4 9-19 10-26 12-2 12-37 14-55 15-85 P Pin A Pos. A (Normal) S Socket Special contacts for #26 to #30 AWG are also available. Use the following contact codes to specify these contacts: B Pos. B C Pos. C G Pin #23 contacts are packaged with connectors. #16 and #12 contacts must be ordered separately. Omit D Pos. D H Socket Z1 Stainless Steel / Passivated L M © 2007 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-4 Rev. 05-APR-2007 E-Mail: [email protected] Series 804 Series 804 “Mighty Mouse” Push‑Pull Quick-Disconnect Series 804 Plug Connectors .990 (25.15) .561(14.25) .060 (1.52) KEY A .925 (23.50) MAX .561(14.25) .060 (1.52) B øA øC øD øB Integral Band Platform 804-001-06 øC øD E THREAD D Accessory Thread 804-002-06 E dimensions Shell Size 5 6 7 8 9 10 12 14 15 In. ØA mm. .427 .495 .575 .614 .670 .745 .865 .985 1.041 10.85 12.57 14.61 15.60 17.02 18.92 21.97 25.02 26.44 In. ØB mm. .246 .286 .390 .442 .500 .564 .650 .805 .850 In. 6.25 7.26 9.91 11.23 12.70 14.33 16.51 20.45 21.59 ØC mm. .219 .282 .351 .398 .454 .529 .646 .768 .828 5.56 7.16 8.92 10.11 11.53 13.44 16.41 19.51 21.03 Ø D Max. In. mm. .250 .313 .383 .429 .486 .563 .676 .800 .860 6.35 7.95 9.73 10.90 12.34 14.30 17.17 20.32 21.84 F E Threads .2500-32 UNEF-2A .3125-32 UNEF-2A .4375-28 UNEF-2A .5000-28 UNEF-2A .5625-24 UNEF-2A .6250-24 UNEF-2A .6875-24 UNEF-2A .9375-20 UNEF-2A .9375-20 UNEF-2A G H J series 804 PLUG key positions A° B° A 150° 210° B 75° 210° C 95° 230° D 140° 275° C K B° A° L M © 2007 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-5 Rev. 19-AUG-2008 E-Mail: [email protected]