MIL-DTL 26482 Type 230-019 MIL-DTL-26482 Series II Type Hermetic Quick Release Bayonet Receptacle Single Hole Jam-Nut Mount MS3443 Type Connector Style 019 = Hermetic Jam-Nut Single Hole Mount Receptacle 230 - 019 Series 230 MIL-DTL-26482 Type FT Material/Finish Z1 = Stainless Steel/ Passivated FT = C1215 Stainless Steel/Tin Plated (See Note 2) Alternate Insert Arrangement Insert Arrangement W, X, Y or Z (Omit for Normal) Per MIL-STD-1669 10 - 6 Shell Size P E X Contact Type P = Solder Cup, Pin Face X = Eyelet, Pin Face ØK PANEL CUT-OUT L Max Ref F D G Master Polarizing Keyway .060 Width Polarizing Stripe A F A E A D Ø B Peripheral Gasket Interfacial Seal P (Size 20 Contacts) V (Size 16 & 12 Contacts) Vitreous Insert R O-ring Contact Style "P" B C C D Contact Style "X" J Painted Bayonet Pin Ends N Thread S .027 .011 APPLICATION NOTES 1. To be identified with manufacturer’s name, part number and date code, space permitting. 2. Material/Finish: Shell: Z1 - 304L stainless steel/passivate. FT - C1215 stainless steel/tin plated. Titanium and Inconel® available. Consult factory. Contacts - 52 Nickel alloy/gold plate. Bayonets - Stainless steel/passivate. Seals - Silicone elastomer/N.A. Insulation - Glass/N.A. 3. Consult factory and/or MIL-STD-1669 for arrangement and © 2009 Glenair, Inc. insert position options. 4. Glenair 230-019 will mate with any QPL MIL-DTL-26482 Series II bayonet coupling plug of same size and insert polarization. 5. Performance: Hermeticity - <1 x 10-7 cc/sec @ 1 atm differential. Dielectric withstanding voltage - Consult factory or MIL-STD-1669. Insulation resistance - 5000 megohms min @500VDC. 6. Metric Dimensions (mm) are indicated in parentheses. CAGE CODE 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-20 E-Mail: [email protected] MIL-DTL 26482 Type 230-019 MIL-DTL-26482 Series II Type Hermetic Quick Release Bayonet Receptacle Single Hole Jam-Nut Mount MS3443 Type TABLE I: CONNECTOR AND CUT-OUT DIMENSIONS (Continued Below) B Dia C A Length + .000 - .031 +.000 - .010 Shell + .000 - .031 (+0 -0.8) (+0 -0.3) Size (+0 -0.8) Across Flange Mounting Corner Flat D Dia Min E Panel Flat Location F Mounting Flange Location G J Mounting To Thread Flange Chamfer Thickness ± .010 (0.3) K + .010 - .005 (+0.3 -0.1) Panel Mounting Hole 8 .954 (24.2) 1.078 (27.4) .530 (13.5) .403 (10.2) .536 (13.6) .707/.691 (18.0/17.6) .113/.097 (2.9/2.5) .368 (9.3) .572 (14.5) 10 1.078 (27.4) 1.203 (30.6) .655 (16.6) .515 (13.1) .661 (16.8) .707/.691 (18.0/17.6) .113/.097 (2.9/2.5) .368 (9.3) .697 (17.7) 12 1.266 (32.2) 1.391 (35.3) .818 (20.8) .630 (16.0) .824 (20.9) .707/.691 (18.0/17.6) .113/.097 (2.9/2.5) .368 (9.3) .885 (22.5) 14 1.391 (35.3) 1.516 (38.5) .942 (23.9) .755 (19.2) .948 (24.1) .707/.691 (18.0/17.6) .113/.097 (2.9/2.5) .368 (9.3) 1.010 (25.7) 16 1.516 (38.5) 1.641 (41.7) 1.062 (27.0) .880 (22.4) 1.072 (27.2) .707/.691 (18.0/17.6) .113/.097 (2.9/2.5)) .368 (9.3) 1.135 (28.8) 18 1.641 (41.7) 1.766 (44.9) 1.191 (30.3) .980 (24.9) 1.197 (30.4) .707/.691 (18.0/17.6) .113/.097 (2.9/2.5) .368 (9.3) 1.260 (32.0) 20 1.828 (46.4) 1.954 (49.6) 1.316 (33.4) 1.105 (28.1) 1.322 (33.6) .772/.754 (19.6/19.2) .148/.128 (3.8/3.3) .368 (9.3) 1.385 (35.2) 22 1.954 (49.6) 2.078 (52.8) 1.441 (36.6) 1.230 (31.2) 1.447 (36.8) .772/.754 (19.6/19.2) .148/.128 (3.8/3.3) .368 (9.3) 1.510 (38.4) 24 2.078 (52.8) 2.203 (56.0) 1.566 (39.8) 1.385 (35.2) 1.572 (39.9) .803/.785 (20.4/19.9) .148/.128 (3.8/3.3) .395 (10.0) 1.635 (41.5) TABLE I (Continued): CONNECTOR AND CUT-OUT DIMENSIONS Shell Size L Overall Length N UNEF-2A Mounting Thread P R O-Ring Seal MS29513- S Panel Thickness 8 .820 (20.8) .5625-24 .134/.074 (3.4/1.9) 16 10 .820 (20.8) .6875-24 .134/.074 (3.4/1.9) 12 .820 (20.8) .875-20 14 .820 (20.8) 16 V Max. Weight (Lbs) .062 (1.6) .187 (4.7) .204/.144 (5.2/3.7) .0430 18 .062 (1.6) .187 (4.7) .204/.144 (5.2/3.7) .0610 .134/.074 (3.4/1.9) 21 .062 (1.6) .187 (4.7) .204/.144 (5.2/3.7) .0880 1.000-20 .134/.074 (3.4/1.9) 23 .062 (1.6) .187 (4.7) .204/.144 (5.2/3.7) .1100 .820 (20.8) 1.125-18 .134/.074 (3.4/1.9) 25 .062 (1.6) .187 (4.7) .204/.144 (5.2/3.7) .1310 18 .820 (20.8) 1.250-18 .134/.074 (3.4/1.9) 27 .062 (1.6) .187 (4.7) .204/.144 (5.2/3.7) .1720 20 .920 (23.4) 1.375-18 .099/.039 (2.5/1.0) 29 .062 (1.6) .250 (6.4) .169/.109 (4.3/2.8) .2110 22 .920 (23.4) 1.500-18 .099/.039 (2.5/1.0) 30 .062 (1.6) .250 (6.4) .169/.109 (4.3/2.8) .2420 24 .951 (24.2) 1.625-18 .099/.009 (2.5/0.2) 31 .062 (1.6) .250 (6.4) .139/.079 (3.5/2.0) .2930 © 2009 Glenair, Inc. CAGE CODE 06324 Min Max Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-21 E-Mail: [email protected] D