Hypertronics 667-109 Protective Cover for Hypertronics LPMY Connectors 667-109-15 C 09 -186 Basic Part No. .340 (8.6) Shell Size (Table I) Finish (Table III) 1.644 (41.8) .250 (6.4) Ring Dash No. (Table II), Omit for Standard Post Bake Gasket For Space Application, Omit if Not Required B A 9.00 (228.6) .600 (15.2) Ref. C Dia Standard Dia = .125 (3.2) 1.25 (31.8) Max TABLE III -FINISH OPTIONS TABLE I: SHELL SIZE & CONNECTOR INTERFACE Shell Size 12 15 20 22 Mating Connector LPMY12/ LPMY15/ LPMY20/ LPMY22/ 1.826 2.226 2.626 3.026 A (46.4) (56.5) (66.7) (76.9) TABLE II: RING Dash No. 01 02 03 04 05 07 09 © 2004 Glenair, Inc. C Dia .140 (3.6) .182 (4.6) .191 (4.9) .197 (5.0) .167 (4.2) .218 (5.5) .156 (4.0) .913 1.113 1.313 1.513 B (23.2) (28.3) (33.4) (38.4) Symbol B C J M N NF T Finish Cadmium Plate, Olive Drab Black Anodize Iridite, Gold Over Cadmium Plate over Nickel Electroless Nickel Cadmium Plate, Olive Drab, Over Nickel Cadmium Plate, Olive Drab, Over Electroless Nickel (1000 Hour Salt Spray) Cadmium Plate, Bright Dip Over Nickel (500 Hour Salt Spray) CONSULT FACTORY FOR OTHER AVAILABLE FINISHES 1. Metric dimensions (mm) are indicated in parentheses. 2. Material/Finish: Cover and Knob = Al Alloy/Table III Hardware = SST/Passivate Rope Covering = Teflon/N.A. Gasket = Silicone/N.A. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] H-10