Miscellaneous Rectangular Backshells 527-303 Split Backshell Straight, 45°, & 90° Entry with Accessory Thread for Hughes MRS Pin Body Connectors 527 P 303 NF 158 S C 2 W 1 Product Series 1 = Slotted Shaft for use with screw driver (Omit for Standard) Connector Type P = Pin Body S = Socket Body W = Wing Knob X = Wing Knob, Low Profile (Dim K Applies) (Omit for Standard) Basic No. Finish (Table II) Polarization Position (Omit for None) Shell Size (Table I) Angle and Profile S = Straight A = 45° B = 90° C = Protective Cover and Chain F = Protective Cover and Rope N = No Cover and Rope SYMBOL "A" (45°) SYMBOL "B" (90°) 45° F 1.000 (25.4) G .750 (19.1) Max L M Thread E Wire Protection Tube 8.500+.500 (215.9+12.7) .356+.031 (9.0+0.8) (See Note 2) B Shaft Assembly #9 #10 #8 #7 Pin Body with Pin Protector (Ref Only) #6 H 6-32 UNC-2B 4 Places A #5 #4 #1 #2 #3 C D Wire Rope Standoff Supplied with Shell Size 212 for Wire Rope Attachment Screw 3 Places J/K SYMBOL "S" (STRAIGHT) WING KNOB OPTION Optional Protective Cover (See P/N Development) Wire Rope Attachment Optional NOTES: 1. Metric dimensions (mm) are indicated in parentheses. 2. Backshells to be used with Pin Body Connectors, Back-Mounted on .094 (2.4) Nominal Panel. © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] D-26 Miscellaneous Rectangular Backshells 527-303 Split Backshell Straight, 45°, & 90° Entry with Accessory Thread for Hughes MRS Pin Body Connectors TABLE I: CONNECTOR INTERFACE DIMENSIONS (Continued Below) Shell A Size Dim 20 0 36 0 52 .550 (14.0) 80 .812 (20.6) 104 .812 (20.6) 158 1.250 (31.8) 212 1.850 (47.0) B Dim 1.090 (27.7) 1.090 (27.7) 1.340 (34.0) 1.620 (41.1) 1.620 (41.1) 2.110 (53.6) 2.640 (67.1) C Dim 1.300 (33.0) 1.750 (44.5) 1.900 (48.3) 2.045 (51.9) 2.500 (63.5) 2.500 (63.5) 2.500 (63.5) D Max Dim 1.940 (49.3) 2.390 (60.7) 2.530 (64.3) 2.680 (68.1) 3.130 (79.5) 3.130 (79.5) 3.130 (79.5) E Max Dim 3.000 (76.2) 3.000 (76.2) 3.000 (76.2) 3.000 (76.2) 3.750 (95.3) 3.750 (95.3) 3.750 (95.3) F Max Dim 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.130 (54.1) 2.380 (60.5) 2.380 (60.5) TABLE I: CABLE ENTRY (Continued) Shell Size 20 36 52 80 104 158 212 J Dim +.005 (0.1) .630 (16.0) .630 (16.0) .935 (23.7) .935 (23.7) .935 (23.7) .995 (25.3) .995 (25.3) K Dim +.005 (0.1) N/A N/A N/A N/A N/A .935 (23.7) N/A L Dim .500 (12.7) .500 (12.7) .625 (15.9) 1.000 (25.4) 1.000 (25.4) 1.250 (31.8) 1.250 (31.8) M Thread .750 - 20 UNEF .750 - 20 UNEF .875 - 20 UNEF 1.250 - 18 UNEF 1.250 - 18 UNEF 1.500 - 18 UNEF 1.500 - 18 UNEF G Max Dim 1.880 (47.8) 1.880 (47.8) 1.880 (47.8) 1.880 (47.8) 2.130 (54.1) 2.130 (54.1) 2.130 (54.1) H Max Dim 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.130 (54.1) 2.130 (54.1) 2.130 (54.1) TABLE III: FINISH OPTIONS Symbol B C* G* J LF M N NC NF T U** ZN Finish Cadmium Plate/Olive Drab Black Anodize Anodic Hard Coat Gold Iridite over Cadmium Plate over Electroless Nickel Cadmium Plate/Bright over Electroless Nickel Electroless Nickel Cadmium Plate/Olive Drab over Electroless Nickel Zinc Cobalt/Dark Olive Drab Cadmium Plate/Olive Drab over Electroless Nickel Cadmium Plate/Bright over Electroless Nickel Cadmium Plate/Black Zinc-Nickel Alloy/Olive Drab *Anodize finish is not suitable for EMI shielding or grounding applications. **Applicable to corrosion resisting steel backshells and accessories. Consult factory for other available finishes. Metric dimensions (mm) are indicated in parentheses. © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] D-27