Composite Backshells 447-328 Composite Standard Profile EMI/RFI Band-in-a-Can Backshell with Strain-Relief Clamp and Self-Locking Rotatable Coupling CONNECTOR DESIGNATOR: A B A MIL-DTL-5015, -26482 Series II, and -83723 Series I and III F L H G U MIL-DTL-38999 Series I, II MIL-DTL-38999 Series 1.5 (JN1003) Angle and Profile S - Straight W - 90° Elbow Product Series 447 - EMI/RFI Non-Environmental Banding Backshells MIL-DTL-38999 Series III and IV 447 MIL-DTL-28840 DG123 and DG123A H (See Table III) Basic Part Number S Connector Designator A, F, L, H, G and U SELF-LOCKING Finish Symbol 328 Slot Option S - Pigtail Termin. Slot (Omit for none) Cable Entry (See Table IV) XM 19 20 Connector Shell Size (See Table II) ROTATABLE COUPLING K S Band Option Band supplied with K option (Omit for none) STANDARD PROFILE C AntiDecoupling Device .71 (18.0) Ref E Clamp Closed .44 (11.2) Typ. D E F Accommodates 600-052-1 Band 1.60 (40.6) Max. G H Pigtail Termination Slot .71 (18.0) Ref Entry Dia. Entry Diameter Clamp Closed H F G NOTES © 2009 Glenair, Inc. 1. Metric dimensions (mm) are in parenthesis and are for reference only. 2. Coupling nut supplied unplated. 3. See Table I in Intro for front-end dimensional details. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-78 Composite Backshells 447-328 Composite Standard Profile EMI/RFI Band-in-a-Can Backshell with Strain-Relief Clamp and Self-Locking Rotatable Coupling TABLE II: CONNECTOR SHELL SIZE Shell Size For Connector Designator* E F G Max Entry A F/L H G U ±.06 (1.5) ±.09 (2.3) ±.09 (2.3) Dash No.** 10 08 08 09 – – .69 (17.5) .88 (22.4) 1.19 (30.2) 12 10 10 11 – 08 .75 (19.1) 1.00 (25.4) 1.25 (31.8) 14 12 12 13 11 10 .81 (20.6) 1.13 (28.7) 1.31 (33.3) 16 14 14 15 13 12 .88 (22.4) 1.31 (33.3) 1.38 (35.1) 20 16 16 17 15 14 .94 (23.9) 1.38 (35.1) 1.44 (36.6) 20 18 18 19 17 16 .97 (24.6) 1.44 (36.6) 1.47 (37.3) 22 20 20 21 19 18 1.06 (26.9) 1.63 (41.4) 1.56 (39.6) 24 22 22 23 – 20 1.13 (28.7) 1.75 (44.5) 1.63 (41.4) 32 24 24 25 23 22 1.19 (30.2) 1.88 (47.8) 1.69 (42.9) 32 28 – – 25 24 1.34 (34.0) 2.13 (54.1) 1.78 (45.2) A B **Consult factory for additional entry sizes available. C TABLE III: FINISH Symbol Finish Description XM 2000 Hour Corrosion Resistant Electroless Nickel XMT 2000 Hour Corrosion Resistant Ni-PTFE, Nickel-Fluorocarbon Polymer. 1000 Hour GreyTM XW 2000 Hour Corrosion Resistant Cadmium/Olive Drab over Electroless Nickel D E TABLE IV: CABLE ENTRY H Entry Dia.* Clamp Closed Entry Code ±.06 (1.5) ±.03 (0.8) ±.03 (0.8) .94 (23.9) .22 (5.6) .26 (6.6) 10 1.17 (29.7) .28 (7.1) .34 (8.6) 12 1.28 (32.5) .34 (8.6) .46 (11.7) 14 1.41 (35.8) .46 (11.7) .55 (14.0) 16 1.50 (38.1) .55 (14.0) .62 (15.7) 18 1.56 (39.6) .62 (15.7) .70 (17.8) 20 1.69 (42.9) .70 (17.8) .78 (19.8) 22 1.81 (46.0) .78 (19.8) .85 (21.6) 24 1.91 (48.5) .85 (21.6) .95 (24.1) 28 2.02 (51.3) .95 (24.1) 1.02 (25.9) 32 * Entry diameter equals maximum wire bundle diameter. © 2009 Glenair, Inc. CAGE Code 06324 F Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-79 G