Composite Backshells 447-330 Composite Non-Environmental EMI/RFI Band-in-a-Can Backshell with Qwik-Clamp Strain-Relief and Self-Locking Rotatable Coupling CONNECTOR DESIGNATOR: A B A MIL-DTL-5015, -26482 Series II, and -83723 Series I and III F L H G U MIL-DTL-38999 Series I, II MIL-DTL-38999 Series 1.5 (JN1003) Angle and Profile S -Straight W - 90° Elbow Product Series 447 - EMI/RFI Non-Environmental Banding Backshells MIL-DTL-38999 Series III and IV 447 MIL-DTL-28840 H Connector Designator A, F, L, H, G and U DG123 and DG123A SELF-LOCKING (See Table III) Cable Entry (See Table IV) Basic Part Number S Slot Option S - Pigtail Termin. Slot (Omit for none) Finish Symbol 330 XM 19 28 K S Band Option Band supplied with K option (Omit for none) Connector Shell Size (See Table II) ROTATABLE COUPLING STANDARD PROFILE F C E 1.63 (41.4) Accommodates 600-052-1 Band J .44 (11.2) Typ. G D E Cable Range Anti-Decoupling Device H Pigtail Termination Entry Diameter Slot J US PATENT 5211576 F G Entry Diameter Cable Range H NOTES © 2009 Glenair, Inc. 1. Metric dimensions (mm) are in parenthesis and are for reference only. 2. Coupling nut supplied unplated. 3. See Table I in Intro for front-end dimensional details. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-88 REV 22 NOVEMBER 2013 Composite Backshells 447-330 Composite Non-Environmental EMI/RFI Band-in-a-Can Backshell with Qwik-Clamp Strain-Relief and Self-Locking Rotatable Coupling TABLE II: CONNECTOR SHELL SIZE Shell Size For E F G Max Entry Connector Designator* A F/L H G U ±.06 (1.5) ±.09 (2.3) ±.09 (2.3) Dash No** 08 08 09 – – .69(17.5) .88(22.4) 1.19(30.2) 08 10 10 11 – 08 .75(19.1) 1.00(25.4) 1.25(31.8) 12 12 12 13 11 10 .81(20.6) 1.13(28.7) 1.31(33.3) 16 14 14 15 13 12 .88(22.4) 1.31(33.3) 1.38(35.1) 20 16 16 17 15 14 .94(23.9) 1.38(35.1) 1.44(36.6) 24 18 18 19 17 16 .97(24.6) 1.44(36.6) 1.47(37.3) 28 20 20 21 19 18 1.06(26.9) 1.63(41.4) 1.56(39.6) 32 22 22 23 – 20 1.13(28.7) 1.75(44.5) 1.63(41.4) 36 24 24 25 23 22 1.19(30.2) 1.88(47.8) 1.69(42.9) 40 28 – – 25 24 1.34(34.0) 2.13(54.1) 1.78(45.2) 44 A B **Consult factory for additional entry sizes available. C TABLE III: FINISH Symbol Finish Description XM 2000 Hour Corrosion Resistant Electroless Nickel XMT 2000 Hour Corrosion Resistant Ni-PTFE, NickelFluorocarbon Polymer. 1000 Hour GreyTM XW 2000 Hour Corrosion Resistant Cadmium/Olive Drab over Electroless Nickel D TABLE IV: CABLE ENTRY Entry H J Entry Dia. Cable Range Code ±.06(1.5) ±.06(1.5) ±.03(0.8) Minimum Maximum 08 .72(18.3) .97(24.6) .25(6.4) .10(2.5) .25(6.4) 12 .91(23.1) 1.11(28.2) .38(9.7) .20(5.1) .38(9.7) 16 1.09(27.7) 1.21(30.7) .50(12.7) .33(8.4) .50(12.7) 20 1.22(31.0) 1.21(30.7) .63(15.9) .45(11.4) .63(15.9) 24 1.34(34.0) 1.21(30.7) .75(19.1) .52(13.2) .75(19.1) 28 1.53(38.9) 1.36(34.5) .88(22.2) .64(16.3) .88(22.2) 32 1.72(43.7) 1.51(38.4) 1.00(25.4) .77(19.6) 1.00(25.4) 36 1.85(47.0) 1.51(38.4) 1.13(28.6) .86(21.8) 1.13(28.6) 40 1.97(50.0) 1.51(38.4) 1.25(31.8) .98(24.9) 1.25(31.8) 44 2.09(53.1) 1.63(41.4) 1.38(35.1) 1.13(28.6) 1.38(35.1) * Entry diameter equals maximum wire bundle diameter. ** Cable range equals cable outer diameter. © 2009 Glenair, Inc. CAGE Code 06324 E F Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-89 REV 22 NOVEMBER 2013 G