Banding Tools 600-055 Calibration Key and 600-072-1 Standard and 600-086-1 Micro Gauges 3.00 (76.2) Ref. 600-055 Calibration Key The 600-055 Calibration Key is designed for use with the 600-061 and 600-058 Hand Banding Tools. Material is black anodized aluminum alloy. One full turn clockwise will advance the tension range by 25 lbs., and a counter-clockwise turn will decrease tension by the same amount. Recommended for purchase with 600-072-1 and 600-086-1. 1.75 (44.5) Ref. .50 (12.7) Reference: BAND-IT® part number A44699. 600-072-1 Standard Tension Gauge .375 (9.5) Approx. Calibration Sticker .875 (22.2) Red Red Green Green .875 (22.2) The 600-072-1 Tension Gauge is used to check and calibrate the Tie-Dex II® standard hand tool to values noted on calibration sticker. Constructed of hardened steel, the gauge's accuracy is within ±2 lbs. 2.0 (50.8) 3.34 (84.8) Reference: BAND-IT® part number A48599. 600-086-1 Micro Tension Gauge .375 (9.5) Approx. Calibration Sticker .875 (22.2) Red Red Green Green .875 (22.2) 3.34 (84.8) 2.0 (50.8) The 600-086-1 Micro Tension Gauge is used to check and calibrate the TieDex II® micro hand tool to values noted on calibration sticker. Constructed of hardened steel, the gauge's accuracy is within ±2 lbs. Reference: BAND-IT® part number A47599. Metric Dimensions (mm) are indicated in parentheses. © 2008 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 53 E-Mail: [email protected]