63 630-023 EMI/RFI Environmental Bulkhead Feed-Through with Strain Relief Front and Rear Panel Mount - 45° and 90° 630 A H 023 NF 16 2 H D Individual, Single and/or Dual Shield Termination Fitting Type A = Rear Mount B = Front Mount 1. Metric dimensions (mm) are indicated in parentheses. 2. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. D Mounting Hole (4 Places) .125 (3.2) Max Panel (Typ) Termination Style D = 2 Rings T = 3 Rings Strain Relief Style (H, A, M, D) Product Series Fitting Style 1 = RFI/EMI Only 2 = RFI/EMI Environmental Angle and Profile H = 45° J = 90° Cable Entry (Tables III, IV, V) Basic Part No. Finish (Table II - See inside back cover fold-out or page 14) .710 F (18.0) (Table Max IV) .910 H (23.1) (Table Max IV) J (Table IV) G (Table IV) K (Table IV) C Sq. A Thread (Table III) Sym H (Shown with Rear Mount Type A RFI/EMI Environmental) B Sq. Sym J (Shown With Front Mount Type B RFI/EMI Environmental) E Dia. Panel Cut-Out STYLE H Heavy Duty (Table V) STYLE A Medium Duty (Table V) STYLE M Medium Duty (Table V) N L Cable Range © 2005 Glenair, Inc. M Cable Range STYLE D Medium Duty (Table V) .135 (3.4) Max N P CAGE Code 06324 Cable Range P Cable Range R Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 63 - Page 14 www.glenair.com 63 630-023 EMI/RFI Environmental Bulkhead Feed-Through with Strain Relief Front and Rear Panel Mount - 45° and 90° TABLE III: CABLE ENTRY Dash Clamp Cable Range No. Style Size Min Max 01 1 03* .157 (4.0) .250 (6.4) 02 2 03* .157 (4.0) .250 (6.4) 03 1 04* .187 (4.7) .312 (7.9) 04 2 04* .187 (4.7) .312 (7.9) 05 1 06* .281 (7.1) .437 (11.1) 06 2 06* .281 (7.1) .437 (11.1) 07 1 08 .344 (8.7) .562 (14.3) 08 2 08 .387 (9.8) .562 (14.3) 09 1 10 .375 (9.5) .625 (15.9) 10 2 10 .512 (13.0) .625 (15.9) 11 1 12 .438 (11.1) .750 (19.1) 12 2 12 .575 (14.6) .750 (19.1) 13 1 16 .625 (15.9) .937 (23.8) 14 2 16 .625 (15.9) .937 (23.8) 15 1 20 .875 (22.2) 1.250 (31.8) 16 2 20 .875 (22.2) 1.250 (31.8) 17 1 24 1.000 (25.4) 1.375 (34.9) 18 2 24 1.000 (25.4) 1.375 (34.9) 19 1 28 1.250 (31.8) 1.625 (41.3) 20 2 28 1.250 (31.8) 1.625 (41.3) 21 1 32* 1.437 (36.5) 1.875 (47.6) 22 2 32* 1.437 (36.5) 1.875 (47.6) 23 1 40* 1.875 (47.6) 2.375 (60.3) 24 2 40* 1.875 (47.6) 2.375 (60.3) A Thread Class A 1/2 -28 1/2 -28 5/8 -24 5/8 -24 3/4 -20 3/4 -20 7/8 -20 7/8 -20 1 -20 1 -20 1 3/16 -18 1 3/16 -18 1 7/16 -18 1 7/16 -18 1 3/4 -18 1 3/4 -18 2 -18 2 -18 2 1/4 -16 2 1/4 -16 2 1/2 -16 2 1/2 -16 3 -16 3 -16 B Max .885 (22.5) .885 (22.5) 1.104 (28.0) 1.104 (28.0) 1.197 (30.4) 1.197 (30.4) 1.291 (32.8) 1.291 (32.8) 1.385 (35.2) 1.385 (35.2) 1.635 (41.5) 1.635 (41.5) 1.760 (44.7) 1.760 (44.7) 2.010 (51.1) 2.010 (51.1) 2.260 (57.4) 2.260 (57.4) 2.510 (63.8) 2.510 (63.8) 2.781 (70.6) 2.781 (70.6) 3.281 (83.3) 3.281 (83.3) D Dia C + .015 (+ .4) E Dia Dim. - .000 (- .0) + .010 .593 (15.1) .120 (3.0) (+ .25) .593 (15.1) .120 (3.0) .515 (13.1) .812 (20.6) .120 (3.0) .515 (13.1) .812 (20.6) .120 (3.0) .640 (16.3) .906 (23.0) .120 (3.0) .640 (16.3) .906 (23.0) .120 (3.0) .765 (19.4) .968 (24.6) .120 (3.0) .765 (19.4) .968 (24.6) .120 (3.0) .890 (22.6) 1.062 (27.0) .120 (3.0) .890 (22.6) 1.062 (27.0) .120 (3.0) 1.015 (25.8) 1.250 (31.8) .120 (3.0) 1.015 (25.8) 1.250 (31.8) .120 (3.0) 1.202 (30.5) 1.375 (34.9) .147 (3.7) 1.202 (30.5) 1.375 (34.9) .147 (3.7) 1.452 (36.9) 1.562 (39.7) .147 (3.7) 1.452 (36.9) 1.562 (39.7) .147 (3.7) 1.765 (44.8) 1.750 (44.5) .173 (4.4) 1.765 (44.8) 1.750 (44.5) .173 (4.4) 2.015 (51.2) 1.938 (49.2) .173 (4.4) 2.015 (51.2) 1.938 (49.2) .173 (4.4) 2.625 (57.5) 2.188 (55.6) .173 (4.4) 2.625 (57.5) 2.188 (55.6) .173 (4.4) 2.515 (63.9) 2.625 (66.7) .173 (4.4) 2.515 (63.9) 2.625 (66.7) .173 (4.4) 3.015 (76.6) * Not Available in Style M Clamp Dash No. Clamp Size 01/02 03 03/04 04 05/06 06 07/08 08 09/10 10 12 11/12 13/14 16 15/16 20 17/18 24 19/20 28 21/22 32 23/24 40 F Max .750 (19.1) .810 (20.6) .870 (22.1) .920 (23.4) .980 (24.9) 1.080 (27.4) 1.200 (30.5) 1.480 (37.6) 1.610 (40.9) 1.720 (43.7) 1.830 (46.5) 2.080 (52.8) Dash No. Clamp Size L Max 01/02 03 ----03/04 04 .780 (19.8) 05/06 06 .780 (19.8) 07/08 08 .780 (19.8) 09/10 10 .780 (19.8) 11/12 12 .811 (20.6) 13/14 16 .905 (23.0) 15/16 20 1.092 (27.7) 17/18 24 1.124 (28.5) 19/20 28 1.399 (35.5) 21/22 32 1.399 (35.5) 23/24 40 ----© 2005 Glenair, Inc. TABLE IV: CABLE ENTRY G Max 1.000 (25.4) 1.060 (26.9) 1.125 (28.6) 1.190 (30.2) 1.250 (31.8) 1.330 (33.8) 1.480 (37.6) 1.781 (45.2) 1.938 (49.2) 2.045 (51.9) 2.218 (56.3) 2.594 (65.9) H Max .639 (16.2) .664 (16.9) .688 (17.5) .705 (17.9) .732 (18.6) .773 (19.6) .823 (20.9) 1.041 (26.4) 1.092 (27.7) 1.138 (28.9) 1.184 (30.1) 1.287 (32.7) TABLE V: CABLE ENTRY M Max ----.957 (24.3) 1.145 (29.1) 1.332 (33.8) 1.332 (33.8) 1.551 (39.4) 1.770 (45.0) 2.113 (53.7) 2.363 (60.0) 2.770 (70.4) 3.020 (76.7) ----- N Max .760 (19.3) .760 (19.3) .760 (19.3) .760 (19.3) .760 (19.3) .760 (19.3) 1.073 (27.3) 1.323 (33.6) 1.323 (33.6) 1.572 (39.9) 1.572 (39.9) 1.572 (39.9) CAGE Code 06324 J Max .890 (22.6) .920 (23.4) .940 (23.9) .970 (24.6) .990 (25.1) 1.020 (25.9) 1.090 (27.7) 1.322 (33.6) 1.425 (36.2) 1.475 (37.5) 1.578 (40.1) 1.802 (45.8) K Max .670 (17.0) .670 (17.0) .670 (17.0) .670 (17.0) .670 (17.0) .670 (17.0) .670 (17.0) .700 (17.8) .700 (17.8) .700 (17.8) .820 (20.8) .820 (20.8) P Max .843 (21.4) .906 (23.0) 1.093 (27.8) 1.187 (30.1) 1.281 (32.5) 1.500 (38.1) 1.719 (43.7) 2.062 (52.4) 2.312 (58.7) 2.719 (69.1) 2.969 (75.4) 3.531 (89.7) R Max .630 (16.0) .755 (19.2) .942 (23.9) 1.067 (27.1) 1.192 (30.3) 1.380 (35.1) 1.535 (39.0) 1.848 (46.9) 2.255 (57.3) 2.505 (63.6) 2.755 (70.0) 3.255 (82.7) Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 63 - Page 15 www.glenair.com