Mighty Mouse High Density Series 811 Mighty Mouse High Density (HD) Square Flange PCB Receptacle Connectors 811-005-02 and 811-006-02 With Straight PC Tails Square Flange PC Tail Receptacles Series 811 Mighty Mouse High Density jam nut PCB receptacles have straight PC tails for termination to flex circuits or rigid boards. These receptacles are backpotted with epoxy. The TwistPin contact system meets requirements of MIL-DTL-83513 and provides outstanding resistance to high levels of shock and vibration. Choose solder-dipped or gold-plated tails. Select 811-006-02 with enhanced waterblocking for open face (unmated) immersion requirements. Molded plastic endcap has standoffs. 3A current rating, 600 VAC dielectric withstanding voltage. How To Order Series 811-005-02 and 811-006-02 square flange PC tail receptacles Sample Part Number 811-005-02 MT 5-7 P A 3 -.125 Series Shell Material and Finish Shell Size Insert Arr. Contact Type Key Position PC Tail Finish PC Tail Length 811-005-02 ME Series 811 Rear Panel Mount Square Flange Receptacle, Straight PC Tails, Standard Epoxy Sealing Nickel-PTFE 811-006-02 ZR Series 811 Rear Panel Mount Square Flange Receptacle, Straight PC Tails, Enhanced Waterblocking for Open Face (Unmated) Water Immersion B CAVITY #1 PIN INSERT 5-7 Electroless Nickel 7 Contacts MT 12 Contacts P Pin Contacts 6-12 S Socket Contacts 7-22 Solder-Dipped in 63/37 Tin-Lead 4 Gold Plated b c d e f 8-30 30 Contacts .090 .125 .250 3 Alternate Key Positions 22 Contacts Black ZincNickel (Other lengths are readily available) 9-42 42 Contacts .870 (22.10) MASTER KEYWAY ØC E THD .060 (1.52) .325 (8.26) B 4X .020 (0.51) Ø.018/.022 (0.46/0.56) CAVITY #1 SOCKET INSERT A ØF ØD 4X Ø D ØG TAIL LENGTH ± .015 (0.38) PLASTIC ENDCAP W/ MOLDED STANDOFFS RED FULL MATE INDICATOR STRIPE PANEL (REF) .100 (25.4) MAX Shell Size 5 6 7 8 9 a Normal dimensions A Square In. mm. B Square In. mm. ØC In. mm. ØD In. mm. .625 15.88 .440 11.18 .825 20.96 .093 2.36 .3125-.05P-.1L-2A .350 8.89 .725 .800 .850 .950 18.42 20.32 21.59 24.13 .530 .600 .650 .750 13.46 .950 15.24 1.050 16.51 1.125 19.05 1.250 24.13 26.67 28.58 31.75 .093 .093 .093 .093 2.36 2.36 2.36 2.36 .3750-.05P-.1L-2A .4375-.05P-.1L-2A .5000-.05P-.1L-2A .5625-.05P-.1L-2A .490 .600 .670 .770 12.45 15.24 17.02 19.56 E Thread ØF In. mm. panel cutout Shell Size 5 6 7 8 9 In. ØG mm. .360 .410 9.14 10.41 .520 .570 .660 13.21 14.48 16.76 Dimensions in Inches (millimeters) are subject to change without notice. © 2011 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 15 E-Mail: [email protected]