series 28 HiPer-D Standard and High-Density Connectors 280-022P straight PC tail pin connectors with O-ring flange for rear panel mounting Rear panel mount HiPer-D pin connectors feature non-removable size #20 or #22 straight PC tail contacts and a flange O-ring for a watertight panel seal. Intermateable with standard M24308-type D-Subminiature connectors, the HiPer-D features a rugged machined shell, waterproof sealing and optional ground springs for improved resistance to electromagnetic interference. #4-40 threaded mounting holes simplify panel attachment. Threaded holes on the rear of the connector allow attachment to circuit board. Contacts are gold plated and potted with epoxy. Aluminum shell. Glassreinforced thermoset epoxy insulator, fluorosilicone face seal. 1000 VAC, 5 Amps (#22) or 7.5 Amps (#20). B Shell Size - Contact Arrangements How To Order 280-022P Sample Part Number 2S15 Basic Part Number 280-022P Shell SizeContact Arrangement Contact Arrangements are shown in the adjacent table Shell Finish ME = Electroless Nickel (RoHS) MT = Nickel-PTFE (RoHS) JF = Cadmium with Yellow Chromate Z2 = Gold (RoHS) Z1 = Passivated Stainless Steel (RoHS) me Ground Spring G = Supplied with EMI Ground Spring N = No Ground Spring Mating Hardware N = No Hardware (supplied with #8-32 tapped holes) P = #4-40 Female Jackposts G = Male Guide Pins B = Female Guide Bushings Materials and Finishes Aluminum alloy Copper alloy, 50 microin. gold plated Thermoset epoxy Beryllium copper alloy Fluorosilicone rubber Copper alloy, nickel plated 300 series stainless steel Current Rating Test Voltage Operating Temperature Ingress Protection Shock Vibration, Random B-12 p Specifications #22 5 AMPS, #20 7.5 AMPS 1000 VAC RMS -65° C. to +200° C. IP 67 300 g. 43.92 g. Contact Size and Qty Shell SizeContact Arr. A #20 #22 Standard Density 1S9 9 2S15 15 3S25 25 4S37 37 5S50 50 High Density A = .125 (3.18) Tail Length B = .250 (6.35) Tail Length PC Tail Length Shell Contacts Insulators Retention Clips O-ring and Seal EMI Spring Hardware g 1h15 15 2H26 26 3H44 44 4H62 62 5H78 78 6H104 104 Mating Hardware N No Hardware #8-32 tapped hole B Female Guide Bushings © 2013 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 P #4-40 Female Jackposts G Male Guide Pins series 28 HiPer-D Standard and High-Density Connectors 280-022P straight PC tail pin connectors with O-ring flange for rear panel mounting 280-022P dIMENSIONS STD DENSITY SIZE #20HD CONTACTS .030±.002(0.76±0.05) HI DENSITY SIZE #22D CONTACTS .020±.002(0.51±0.05) TAIL LENGTH ±.015 (±0.38) .025 (0.64) A B REF .746 (18.95) H C D .262±.003 (6.65±.0.08) REF .134R (3.40) C .390±.005 (9.91±0.13) E GB F .094±.002 (2.39±0.05) 4-40 UNC 2B TH'D .150 (3.81) MIN. DEEP TYP 2 PLCS 10° TYP 2 PL Shell Size 1 2 3 4 5 6 in A mm in B mm C Basic in D mm ± .015 ± 0.38 ± .015 ± 0.38 in. mm ± .005 ± 0.13 1.865 2.200 2.736 3.385 3.289 3.383 47.37 55.88 69.49 85.98 83.54 85.93 .725 .725 .725 .725 .837 .899 18.42 18.42 18.42 18.42 21.26 22.83 .984 1.312 1.852 2.500 2.406 2.500 24.99 33.32 47.04 63.50 61.11 63.50 .726 1.054 1.594 2.242 2.139 2.272 18.44 26.77 40.49 56.95 54.33 57.71 in E ± .005 mm ± 0.13 .389 9.88 .389 9.88 .389 9.88 .389 9.88 .501 12.73 .563 14.30 4-40 UNC 2B TH'D .150 (3.81) MIN. DEEP TYP 2PL F Basic in mm 1.424 1.752 2.292 2.940 2.846 2.940 36.17 44.50 58.22 74.68 72.29 74.68 in ± .005 G mm in H mm ± 0.13 ± .015 ± 0.38 .469 11.91 .469 11.91 .469 11.91 .469 11.91 .581 14.76 .643 16.33 1.609 1.944 2.480 3.129 3.033 3.127 40.87 49.38 62.99 79.48 77.04 79.43 Notes B-13 1. Contacts are factory-installed, non-removable and are potted with epoxy. 2. HiPer-D connectors are available with a wide variety of materials and finishes. See About Series 28 HiPer-D Shell Plating Options for additional choices . Glenair offers the industry’s widest selection of plating and material choices with no setup charge, no minimum order quantity and no schedule impact. 3. For panel cutout dimensions, refer to Panel Cutouts and Printed Circuit Board Footprints. 4. For printed circuit board mounting dimensions, refer to Panel Cutouts and Printed Circuit Board Footprints. 5. HiPer-D connectors meet the requirements of MIL-DTL-24308 and are intermateable with standard M24308-type D-Subminiature connectors with corresponding contact arrangements and type. 6. Additional electrical, mechanical and environmental specifications are listed in HiPer-D Product Specification. © 2013 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324