37 370-005 Splash-Proof Cable Sealing Backshell with Strain Relief Low Profile - Rotatable Coupling 370 F S 005 M 16 10 L 6 CONNECTOR DESIGNATORS Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Product Series A-F-H-L-S ROTATABLE COUPLING Connector Designator Strain Relief Style (L,G) Angle and Profile A = 90° B = 45° S = Straight Cable Entry (Tables IV, V) Shell Size (Table III) Finish (Table II) Basic Part No. Length ± .060 (1.52) Min. Order Length 2.0 Inch (See Note 6) A Thread (Table I) Length * O-Rings .312 (7.9) Max * Length ± .060 (1.52) Min. Order Length 1.5 Inch (See Note 6) C Typ. (Table I) STYLE 2 (STRAIGHT See Note 1) E G (Table III) (Table III) .88 (22.4) Max F (Table III) H (Table III) STYLE 2 (45° & 90° See Note 1) STYLE L Light Duty (Table IV) STYLE G Light Duty (Table V) .850 (21.6) Max .072 (1.8) Max Cable Range © 2005 Glenair, Inc. Cable Range J CAGE Code 06324 K Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 37 - Page 20 www.glenair.com 37 370-005 Splash-Proof Cable Sealing Backshell with Strain Relief Low Profile - Rotatable Coupling See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. Shell Size Conn. Desig. H A-F-L-S 09 08 11 10 13 12 15 14 17 16 19 18 21 20 23 22 25 24 28 32 36 Dash No. 01 02 03 04 05 06 07 08 09 10 TABLE III: ELBOW DIMENSIONS E Max .457 (11.6) .520 (13.2) .582 (14.8) .645 (16.4) .738 (18.7) .926 (23.5) .926 (23.5) 1.020 (25.9) 1.020 (25.9) 1.145 (29.1) 1.207 (30.7) 1.238 (31.4) F Max 2.030 (51.6) 2.030 (51.6) 2.090 (53.1) 2.150 (54.6) 2.240 (56.9) 2.340 (59.4) 2.340 (59.4) 2.540 (64.5) 2.540 (64.5) 2.680 (68.1) 2.680 (68.1) 2.680 (68.1) TABLE IV: CABLE ENTRY Cable Range J Max Min Max .781 (19.8) .062 (1.6) .125 (3.2) .968 (24.6) .125 (3.2) .250 (6.4) 1.046 (26.6) .250 (6.4) .375 (9.5) 1.156 (29.4) .250 (6.4) .500 (12.7) 1.218 (30.9) .375 (9.5) .625 (15.9) 1.343 (34.1) .500 (12.7) .750 (19.1) 1.468 (37.3) .625 (15.9) .875 (22.2) 1.593 (40.5) .625 (15.9) 1.000 (25.4) 1.718 (43.6) .750 (19.1) 1.125 (28.6) 1.843 (46.8) .875 (22.2) 1.250 (31.8) Dash No. 01 02 03 04 05 06 07 08 09 10 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G and H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Interface O-Ring not supplied with connector designator A. 5. Consult factory for shorter lengths on straight backshells. © 2005 Glenair, Inc. G Max .500 (12.7) .595 (15.1) .610 (15.5) .700 (17.8) .885 (22.5) .975 (24.8) .975 (24.8) 1.125 (28.6) 1.125 (28.6) 1.225 (31.1) 1.575 (40.0) 1.775 (45.1) CAGE Code 06324 H Max 2.040 (51.8) 2.040 (51.8) 2.160 (54.9) 2.180 (55.4) 2.250 (57.2) 2.340 (59.4) 2.340 (59.4) 2.510 (63.8) 2.510 (63.8) 2.620 (66.5) 2.620 (66.5) 2.620 (66.5) TABLE V: CABLE ENTRY Cable Range K Max Min Max .593 (15.1) .062 (1.6) .125 (3.2) .718 (18.2) .125 (3.2) .250 (6.4) .873 (22.2) .250 (6.4) .375 (9.5) .968 (24.6) .375 (9.5) .500 (12.7) 1.109 (28.2) .500 (12.7) .625 (15.9) 1.218 (30.9) .625 (15.9) .750 (19.1) 1.343 (34.1) .750 (19.1) .875 (22.2) 1.468 (37.3) .875 (22.2) 1.000 (25.4) 1.593 (40.5) 1.000 (25.4) 1.125 (28.6) 1.718 (43.6) 1.125 (28.6) 1.250 (31.8) TABLE II: STANDARD FINISHES GLENAIR SYMBOL B C G M NF FINISH Cadmium Plate, Olive Drab Anodize, Black Hard Coat, Anodic Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel See Inside Back Cover for Additional Finish Options Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 37 - Page 21 www.glenair.com