ELECTRONICS INDUSTRY (USA) CO., LTD. 103 MOO 4, LATKRABANG EXPORT PROCESSING ZONE, LATKRABANG, BANGKOK 10520, THAILAND TEL. : (66 2) 326-0102, 739-4580 FAX. : (66 2) 326-0933 E-mail : eicfirst @ iname.com http. : // www.eicsemi.com SMBJ 5.0 - 170A SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR VBR : 6.8 - 200 Volts PPK : 600 Watts 0.15 4.8 * 600W surge capability at 1ms * Excellent clamping capability * Low inductance * Response Time Typically < 1ns * Typical IR less then 1µA above 10V 0.15 FEATURES : 5.4 SMB (DO-214AA) 1.1 ? 0.3 0.22 ? 0.07 2.0 ? 0.1 3.6 ? 0.15 2.3 ? 0.2 MECHANICAL DATA * Case : SMB Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Lead Formed for Surface Mount * Polarity : Color band denotes cathode end * Mounting position : Any * Weight : 0.108 gram Dimensions in millimeter MAXIMUM RATINGS Rating at Ta = 25 ?C ambient temperature unless otherwise specified. Rating Symbol Value Units PPPM Minimum 600 Watts IPPM See Table Amps VFM See Note 3, 4 Volts TJ, TSTG - 65 to + 150 ?C Peak Pulse Power Dissipation on 10/1000µs (1) waveform (Notes 1, 2, Fig. 3) Peak Pulse Current on 10/1000µs waveform (Note 1, Fig. 5) Peak forward Surge Current 8.3 ms single half sine-wave superimposed on rated load ( JEDEC Method )(Notes 2, 3) Maximum Instantaneous Forward Voltage at 50A (Note 3,4 ) Operating Junction and Storage Temperature Range Note : (1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25 ?C per Fig. 1 (2) Mounted on 5.0mm2 (0.013mm thick) land areas. (3) Measured on 8.3ms. Single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minutes maximum. (4) VF=3.5V for SMBJ5.0 thru SMBJ90 devices and VF=5V for SMBJ100 thru SMBJ170 devices. UPDATE : MAY 25, 2000 ELECTRONICS INDUSTRY (USA) CO., LTD. 103 MOO 4, LATKRABANG EXPORT PROCESSING ZONE, LATKRABANG, BANGKOK 10520, THAILAND TEL. : (66 2) 326-0102, 739-4580 FAX. : (66 2) 326-0933 E-mail : eicfirst @ iname.com http. : // www.eicsemi.com ELECTRICAL CHARACTERISTICS Rating at Ta = 25 ?C ambient temperature unless otherwise specified Min. Max. IT (mA) VWM (V) Maximum Reverse Leakage @ VWM IR (µA) Breakdown Voltage @ IT ( Note 1 ) TYPE Reverse Stand-off Voltage Marking Code VBR (V) Maximum Peak Pulse Surge Current (See Fig. 2) IPPM (A) Maximum Clamping Voltage @ IPPM 9.6 VC (V) SMBJ5.0 606I 6.40 7.55 10 5.0 800 62.5 SMBJ5.0A 656I 6.40 7.25 10 5.0 800 65.2 9.2 SMBJ6.0 607C 6.67 8.45 10 6.0 800 52.6 11.4 SMBJ6.0A 657C 6.67 7.67 10 6.0 800 58.3 10.3 SMBJ6.5 607I 7.22 9.14 10 6.5 500 48.7 12.3 SMBJ6.5A 657I 7.22 8.30 10 6.5 500 53.6 11.2 SMBJ7.0 608E 7.78 9.86 10 7.0 200 45.1 13.3 SMBJ7.0A 658E 7.78 8.95 10 7.0 200 50.0 12.0 SMBJ7.5 609A 8.33 10.67 1.0 7.5 100 42.0 14.3 SMBJ7.5A 659A 8.33 9.58 1.0 7.5 100 46.5 12.9 SMBJ8.0 609G 8.89 11.3 1.0 8.0 50 40.0 15.0 SMBJ8.0A 659G 8.89 10.23 1.0 8.0 50 44.1 13.6 SMBJ8.5 6010 9.44 11.92 1.0 8.5 20 37.7 15.9 SMBJ8.5A 6510 9.44 10.82 1.0 8.5 20 41.7 14.4 SMBJ9.0 6011 10.0 12.6 1.0 9.0 10 35.5 16.9 SMBJ9.0A 6511 10.0 11.5 1.0 9.0 10 39.0 15.4 SMBJ10 6012 11.1 14.1 1.0 10 5.0 31.9 18.8 SMBJ10A 6512 11.1 12.8 1.0 10 5.0 35.3 17.0 SMBJ11 6013 12.2 15.4 1.0 11 5.0 29.9 20.1 SMBJ11A 6513 12.2 14.0 1.0 11 5.0 33.0 18.2 SMBJ12 6014 13.3 16.9 1.0 12 5.0 27.3 22.0 SMBJ12A 6514 13.3 15.3 1.0 12 5.0 30.2 19.9 SMBJ13 6015 14.4 18.2 1.0 13 5.0 25.2 23.8 SMBJ13A 6515 14.4 16.5 1.0 13 5.0 27.9 21.5 SMBJ14 6017 15.6 19.8 1.0 14 5.0 23.3 25.8 SMBJ14A 6517 15.6 17.9 1.0 14 5.0 25.8 23.2 SMBJ15 6018 16.7 21.1 1.0 15 5.0 22.3 26.9 SMBJ15A 6518 16.7 19.2 1.0 15 5.0 24.0 24.4 SMBJ16 6019 17.8 22.6 1.0 16 5.0 20.8 28.8 SMBJ16A 6519 17.8 20.5 1.0 16 5.0 23.1 26.0 SMBJ17 6020 18.9 23.9 1.0 17 5.0 19.7 30.5 SMBJ17A 6520 18.9 21.7 1.0 17 5.0 21.7 27.6 SMBJ18 6022 20.0 25.3 1.0 18 5.0 18.6 32.2 SMBJ18A 6522 20.0 23.3 1.0 18 5.0 20.5 29.2 SMBJ20 6024 22.2 28.1 1.0 20 5.0 16.7 35.8 SMBJ20A 6524 22.2 25.5 1.0 20 5.0 18.5 32.4 SMBJ22 6026 24.4 30.9 1.0 22 5.0 15.2 39.4 SMBJ22A 6526 24.4 28.0 1.0 22 5.0 16.9 35.5 SMBJ24 6029 26.7 33.8 1.0 24 5.0 14.0 43.0 SMBJ24A 6529 26.7 30.7 1.0 24 5.0 15.4 38.9 SMBJ26 6031 28.9 36.6 1.0 26 5.0 12.4 46.6 SMBJ26A 6531 28.9 33.2 1.0 26 5.0 14.2 42.1 SMBJ28 6033 31.1 39.4 1.0 28 5.0 12.0 50.0 SMBJ28A 6533 31.1 35.8 1.0 28 5.0 13.2 45.4 SMBJ30 6036 33.3 42.2 1.0 30 5.0 11.2 53.5 SMBJ30A 6536 33.1 38.3 1.0 30 5.0 12.4 46.6 103 MOO 4, LATKRABANG EXPORT PROCESSING ZONE, LATKRABANG, BANGKOK 10520, THAILAND TEL. : (66 2) 326-0102, 739-4580 FAX. : (66 2) 326-0933 E-mail : eicfirst @ iname.com http. : // www.eicsemi.com Min. Max. IT (mA) VWM (V) Maximum Reverse Leakage @ VWM IR (µA) 36.7 36.7 40.0 40.0 44.4 44.4 47.8 47.8 50.0 50.0 53.3 53.3 56.7 56.7 60.0 60.0 64.4 64.4 66.7 66.7 71.1 71.1 77.8 77.8 83.3 83.3 86.7 86.7 94.4 94.4 100 100 111 111 122 122 133 133 144 144 167 167 178 178 189 189 46.5 42.2 50.7 46.0 56.3 51.1 60.5 54.9 63.3 57.5 67.5 61.3 71.8 65.2 76.0 69.0 81.6 74.1 84.5 76.7 90.1 81.8 98.6 89.5 105.7 95.8 109.8 99.7 119.2 108.2 126.5 115.5 141.0 128.0 154.5 140.5 169.0 153.0 182.5 165.5 211.5 192.5 226.0 205.0 239.5 217.5 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 33 33 36 36 40 40 43 43 45 45 48 48 51 51 54 54 58 58 60 60 64 64 70 70 75 75 78 78 85 85 90 90 100 100 110 110 120 120 130 130 150 150 160 160 170 170 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 Breakdown Voltage @ IT ( Note 1 ) TYPE Marking Code VBR (V) SMBJ33 SMBJ33A SMBJ36 SMBJ36A SMBJ40 SMBJ40A SMBJ43 SMBJ43A SMBJ45 SMBJ45A SMBJ48 SMBJ48A SMBJ51 SMBJ51A SMBJ54 SMBJ54A SMBJ58 SMBJ58A SMBJ60 SMBJ60A SMBJ64 SMBJ64A SMBJ70 SMBJ70A SMBJ75 SMBJ75A SMBJ78 SMBJ78A SMBJ85 SMBJ85A SMBJ90 SMBJ90A SMBJ100 SMBJ100A SMBJ110 SMBJ110A SMBJ120 SMBJ120A SMBJ130 SMBJ130A SMBJ150 SMBJ150A SMBJ160 SMBJ160A SMBJ170 SMBJ170A Reverse Stand-off Voltage 6040 6540 6043 6543 6048 6548 6051 6551 6054 6554 6057 6557 6061 6561 6065 6565 6070 6570 6072 6572 6076 6576 6084 6584 6090 6590 6093 6593 60B0 65B0 60B1 65B1 60B2 65B2 60B3 65B3 60B4 65B4 60B5 65B5 60B8 65B8 60B9 65B9 60D0 65D0 Maximum Peak Pulse Surge Current (See Fig. 2) IPPM (A) Maximum Clamping Voltage @ IPPM 10.2 11.3 9.3 10.3 8.4 9.3 7.8 8.6 7.5 8.3 7.0 7.7 6.6 7.3 6.2 6.9 5.8 6.4 5.6 6.2 5.3 5.8 4.8 5.3 4.5 4.9 4.3 4.7 3.9 4.4 3.8 4.1 3.4 3.7 3.0 3.4 2.8 3.1 2.6 2.9 2.2 2.5 2.1 2.3 2.0 2.2 59.0 53.3 64.3 58.1 71.4 64.5 76.7 69.4 80.3 72.7 85.5 77.4 91.1 82.4 96.3 87.1 103.0 93.6 107 96.8 114 103 125 113 134 121 139 126 151 137 160 146 179 162 196 177 214 193 231 209 268 243 287 259 304 275 Note: ( 1 ) VBR measured after IT applied for 300 µs., IT = square wave pulse or equivalent. ( 2 ) Surge Current Waveform per Figure 5 and Derate per Figure 1 ( 3 ) A Transient suppressor is normally selected according to the reverse " Stand-off Voltage " (VWM) which should be equal to or greater then the D.C. or continuous peak operating voltage level. VC (V) ELECTRONICS INDUSTRY (USA) CO., LTD. 103 MOO 4, LATKRABANG EXPORT PROCESSING ZONE, LATKRABANG, BANGKOK 10520, THAILAND TEL. : (66 2) 326-0102, 739-4580 FAX. : (66 2) 326-0933 E-mail : eicfirst @ iname.com http. : // www.eicsemi.com RATING AND CHARACTERISTIC CURVES ( SMBJ5.0 - SMBJ170A ) FIG.2 - MAXIMUM NON-REPETITIVE PERK FORWARD SURGE CURRENT 120 PEAK FORWARD SURGE CURRENT, AMPERES PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT FIG.1 - PULSE DERATING CURVE 100 80 60 40 20 0 0 25 50 75 100 125 150 100 50 10 175 TJ = TJmax 8.3 ms SINGLE HALF SINE WAVE JEDEC METHOD 200 1 2 Ta, AMBIENT TEMPERATURE, ( ?C) FIG.3 - TYPICAL JUNCTION CAPACITANCE 6 10 20 40 60 PP,PEAK POWER (kW) 100 VR Measured @ Zero Basic (0V) 1,000 VR Measured @ Stand-off voltage 100 TJ = 25?C f = 1.0 MHz Vsig = 50 mVP-P NON-REPETITIVE PULSE WAVEFORM SHOWN IN FIG. 5 Ta=25?C 10 1.0 0.1 0.1µs 1.0µs 10µs 100µs 1.0ms 10 1 10 2 100 20 200 VR, REVERSE STAND OFF VOLTAGE,VOLTS IPPM, PEAK PULSE CURRENT, % FIG.5 - PULSE WAVEFORM tr ? 10µs 100 Peak Value IPPM Ta=25 ?C Pulse Width (tp) is defined as that point where the peak current decays to 50% of IPPM Half Value - IPPM 2 50 td 0 0 100 FIG.4 - PEAK PULSE POWER RATING CURVE 6,000 CJ, CAPACITANCE, pF 4 NUMBER OF CYCLES AT 60Hz 1.0 2.0 t, TIME(ms) 3.0 4.0 tp, PULSE WIDTH, SEC 10ms