38 380-071 EMI/RFI Non-Environmental Backshell with Strain Relief Type G - Rotatable Coupling - Low Profile 380 F S 071 M 16 08 A 6 CONNECTOR DESIGNATORS Product Series A-F-H-L-S Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Connector Designator ROTATABLE COUPLING TYPE G INDIVIDUAL OR OVERALL SHIELD TERMINATION Strain Relief Style (H, A, M, D) Angle and Profile A = 90° B = 45° S = Straight Cable Entry (Table X, XI) Shell Size (Table I) Basic Part No. Finish (Table II) .500 (12.7) Max Length ± .060 (1.52) Minimum Order Length 2.0 Inch (See Note 4) A Thread (Table I) .88 (22.4) Max C Typ. (Table I) G (Table III) E (Table III) STYLE 2 (45° & 90° See Note 1) F (Table III) H (Table III) STYLE H Heavy Duty (Table X) STYLE A Medium Duty (Table XI) W T Cable Range © 2005 Glenair, Inc. V Cable Range STYLE M Medium Duty (Table XI) X Y CAGE Code 06324 Cable Range STYLE D Medium Duty (Table XI) .135 (3.4) Max Y Cable Entry Z Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 38 - Page 124 www.glenair.com 38 380-071 EMI/RFI Non-Environmental Backshell with Strain Relief Type G - Rotatable Coupling - Low Profile TABLE III: ELBOW DIMENSIONS Shell Size F E G Conn. Desig. Max Max Max A-F-L-S H .510 (13.0) .457 (11.6) 3.460 (87.9) 08 09 .520 (13.2) 3.520 (89.4) .595 (15.1) 10 11 .582 (14.8) 3.580 (90.9) .610 (15.5) 12 13 .645 (16.4) 3.900 (99.1) .700 (17.8) 14 15 .885 (22.5) .738 (18.7) 4.010 (101.9) 16 17 .975 (24.8) .926 (23.5) 4.200 (106.7) 18 19 .926 (23.5) 4.200 (106.7) .975 (24.8) 20 21 22 23 1.020 (25.9) 4.350 (110.5) 1.125 (28.6) 24 25 1.020 (25.9) 4.350 (110.5) 1.125 (28.6) 1.145 (29.1) 4.400 (111.8) 1.225 (31.1) 28 1.207 (30.7) 4.500 (114.3) 1.575 (40.0) 32 1.238 (31.4) 4.590 (116.6) 1.775 (45.1) 36 Dash No. 04 06 08 10 12 16 20 24 28 32 TABLE II: STANDARD FINISHES H Max 3.460 (87.9) 3.590 (91.2) 3.610 (91.7) 3.910 (99.3) 4.000 (101.6) 4.170 (105.9) 4.170 (105.9) 4.280 (108.7) 4.280 (108.7) 4.450 (113.0) 4.700 (119.4) 4.700 (119.4) TABLE X: CABLE ENTRY Cable Range V T Max Max Min Max .957 (24.3) .780 (19.8) .125 (3.2) .312 (7.9) .250 (6.4) .437 (11.1) .780 (19.8) 1.145 (29.1) .780 (19.8) 1.332 (33.8) .312 (7.9) .562 (14.3) .350 (8.9) .625 (15.9) .780 (19.8) 1.332 (33.8) .811 (20.6) 1.551 (39.4) .500 (12.7) .750 (19.1) .905 (23.0) 1.770 (45.0) .625 (15.9) .937 (23.8) .875 (22.2) 1.250 (31.8) 1.092 (27.7) 2.113 (53.7) 1.124 (28.5) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 1.399 (35.5) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 1.399 (35.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) Dash W X No. Max Max 03* .437 (11.1) .760 (19.3) 04* .437 (11.1) .760 (19.3) 06* .500 (12.7) .760 (19.3) 08 .563 (14.3) .760 (19.3) 10 .563 (14.3) .760 (19.3) 12 .563 (14.3) .760 (19.3) 16 .656 (16.7) 1.073 (27.3) 20 .656 (16.7) 1.323 (33.6) 24 .656 (16.7) 1.323 (33.6) 28 1.188 (30.2) 1.572 (39.9) 32* 1.187 (30.1) 1.572 (39.9) 40* 1.125 (28.6) 1.572 (39.9) * Not available in Style M clamp. © 2005 Glenair, Inc. GLENAIR SYMBOL B M NF FINISH Cadmium Plate, Olive Drab Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel See Inside Back Cover for Additional Finish Options See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G and H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. TABLE XI: CABLE ENTRY Z Y Cable Range Max Max Max Min ** .630 (16.0) .156 (4.0) .250 (6.4) .843 (21.4) .755 (19.2) .188 (4.8) .312 (7.9) .906 (23.0) .942 (23.9) .281 (7.1) .438 (11.1) 1.093 (27.8) 1.187 (30.1) 1.067 (27.1) .344 (8.7) .562 (14.3) 1.281 (32.5) 1.192 (30.3) .375 (9.5) .625 (15.9) 1.500 (38.1) 1.380 (35.1) .438 (11.1) .750 (19.1) 1.719 (43.7) 1.535 (39.0) .562 (14.3) .938 (23.8) 2.062 (52.4) 1.848 (46.9) .750 (19.1) 1.250 (31.8) 2.312 (58.7) 2.255 (57.3) .781 (19.8) 1.375 (34.9) 2.719 (69.1) 2.505 (63.6) .969 (24.6) 1.625 (41.3) 2.969 (75.4) 2.755 (70.0) 1.125 (28.6) 1.875 (47.6) 3.531 (89.7) 3.255 (82.7) 1.469 (37.3) 2.375 (60.3) ** Not Applicable Style D CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 38 - Page 125 www.glenair.com