37 370-007 Submersible Cable Sealing Backshell with Strain Relief Standard Profile - Rotatable Coupling 370 G S 007 NF 17 10 M 6 CONNECTOR DESIGNATOR G ROTATABLE COUPLING Product Series Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Connector Designator Strain Relief Style (H, A, M, D) Angle and Profile H = 45° J = 90° S = Straight Cable Entry (Tables X, XI) Shell Size (Table I) Basic Part No. Finish (Table II) Length ± .060 (1.52) Min. Order Length 1.5 Inch (See Note 4) A Thread (Table I) Length ± .060 (1.52) Min. Order Length 2.0 Inch (See Note 4) C Typ. (Table I) STYLE 2 (STRAIGHT See Note 1) G (Table III) E (Table III) Length ± .060 (1.52) 1.25 (31.8) Max F (Table III) H (Table III) STYLE 2 (45° & 90° See Note 1) STYLE H Heavy Duty (Table X) STYLE A Medium Duty (Table XI) W T Cable Range © 2005 Glenair, Inc. V Cable Range STYLE M Medium Duty (Table XI) X Y CAGE Code 06324 Cable Range STYLE D Medium Duty (Table XI) .135 (3.4) Max Y Cable Entry Z Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 37 - Page 8 www.glenair.com 37 370-007 Submersible Cable Sealing Backshell with Strain Relief Standard Profile - Rotatable Coupling See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. TABLE III: ELBOW DIMENSIONS Shell E G F Size Max Max Max 11 1.240 (31.5) 1.050 (26.7) 1.380 (35.1) 13 1.260 (32.0) 1.070 (27.2) 1.440 (36.6) 15 1.290 (32.8) 1.100 (27.9) 1.500 (38.1) 17 1.310 (33.3) 1.120 (28.4) 1.570 (39.9) 19 1.340 (34.0) 1.150 (29.2) 1.630 (41.4) 23 1.380 (35.1) 1.190 (30.2) 1.730 (43.9) 25 1.410 (35.8) 1.220 (31.0) 1.800 (45.7) 29 1.580 (40.1) 1.390 (35.3) 2.040 (51.8) 33 1.620 (41.1) 1.430 (36.3) 2.130 (54.1) Dash No. 04 06 08 10 12 16 20 24 28 32 H Max 1.190 (30.2) 1.250 (31.8) 1.320 (33.5) 1.380 (35.1) 1.460 (37.1) 1.540 (39.1) 1.610 (40.9) 1.850 (47.0) 1.940 (49.3) TABLE X: CABLE ENTRY T V Cable Range Max Max Min Max .780 (19.8) .957 (24.3) .125 (3.2) .312 (7.9) .780 (19.8) 1.145 (29.1) .250 (6.4) .437 (11.1) .780 (19.8) 1.332 (33.8) .387 (9.8) .562 (14.3) .780 (19.8) 1.332 (33.8) .350 (8.9) .625 (15.9) .811 (20.6) 1.551 (39.4) .500 (12.7) .750 (19.1) .905 (23.0) 1.770 (45.0) .625 (15.9) .937 (23.8) 1.092 (27.7) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 1.124 (28.5) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 1.399 (35.5) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 1.399 (35.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) TABLE XI: CABLE ENTRY Dash W X Y Z No. Max Max Max Max 03* .437 (11.1) .760 (19.3) .843 (21.4) .630 (16.0) 04* .437 (11.1) .760 (19.3) .906 (23.0) .755 (19.2) 06* .500 (12.7) .760 (19.3) 1.093 (27.8) .942 (23.9) 08 .563 (14.3) .760 (19.3) 1.187 (30.1) 1.067 (27.1) 10 .563 (14.3) .760 (19.3) 1.281 (32.5) 1.192 (30.3) 12 .563 (14.3) .760 (19.3) 1.500 (38.1) 1.380 (35.1) 16 .656 (16.7) 1.073 (27.3) 1.719 (43.7) 1.535 (39.0) 20 .656 (16.7) 1.323 (33.6) 2.062 (52.4) 1.848 (46.9) 24 .656 (16.7) 1.323 (33.6) 2.312 (58.7) 2.255 (57.3) 28 1.188 (30.2) 1.572 (39.9) 2.719 (69.1) 2.505 (63.6) 32* 1.187 (30.1) 1.572 (39.9) 2.969 (75.4) 2.755 (70.0) 40* 1.125 (28.6) 1.572 (39.9) 3.531 (89.7) 3.255 (82.7) * Not available in Style M clamp. 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G & H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on TABLE II: STANDARD FINISHES GLENAIR SYMBOL B C G M NF FINISH Cadmium Plate, Olive Drab Anodize, Black Hard Coat, Anodic Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel See Inside Back Cover for Additional Finish Options Cable Range Min ** Max .156 (4.0) .250 (6.4) .188 (4.8) .312 (7.9) .281 (7.1) .438 (11.1) .387 (9.8) .562 (14.3) .375 (9.5) .625 (15.9) .438 (11.1) .750 (19.1) .625 (15.9) .938 (23.8) .875 (22.2) 1.250 (31.8) 1.000 (25.4) 1.375 (34.9) 1.250 (31.8) 1.625 (41.3) 1.437 (36.5) 1.875 (47.6) 1.875 (47.6) 2.375 (60.3) ** Not Applicable Style D Add “-445” to Specify Glenair’s Non-Detent, ("NESTOR") Spring-Loaded, Self-Locking Coupling. See Page 41 for Details. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 37 - Page 9 www.glenair.com