440 440-086 EMI/RFI Tinel-Lock® Ring Adapter Self-Locking Rotatable Coupling - Standard Profile 440 F F 086 M 20 12 AI T1 CONNECTOR DESIGNATORS Product Series A-F-H-L-S Shrink Boot Options (Table IV - Omit for none) Connector Designator SELF-LOCKING ROTATABLE COUPLING Tinel-Lock® Ring Supplied (Table V - Omit for none) Angle and Profile F = Split 45° D = Split 90° Cable Entry (Table IV) Basic Part No. Shell Size (Table I) ® FOR TINEL-LOCK RING TERMINATIONS A Thread (Table I) Finish (Table II) H (Table III) F (Table III) G (Table III) J (Table III) .94 (23.9) Max E Typ. (Table I) .525 (13.3) .94 (23.9) Max Anti-Rotation Device (Typ.) Split 45° .272 (6.9) .135 (3.4) ±.005 (.1) Ref. Split 90° K (Table IV) M (Table IV) L (Table IV) 1.00 (25.4) Max .070 (1.8) Thermochromic Paint (Note 4) Tinel-Lock® Ring Option (See Table V) STYLE 2 (45° & 90° See Note 1) Tinel-Lock® is a registered trademark of Tyco © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 440 - Page 68 www.glenair.com 440 440-086 EMI/RFI Tinel-Lock® Ring Adapter Self-Locking Rotatable Coupling - Standard Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size Conn. Desig. H A-F-L-S 09 08 11 10 13 12 15 14 17 16 19 18 21 20 23 22 25 24 K Dash I.D. No. .250 (6.4) 04 .312 (7.9) 05 .375 (9.5) 06 .437 (11.1) 07 .500 (12.7) 08 .625 (15.9) 10 .750 (19.1) 12 .875 (22.2) 14 16 1.000 (25.4) 18 1.125 (28.6) 20 1.250 (31.8) F Max .82 (20.8) .82 (20.8) .88 (22.4) .94 (23.9) 1.00 (25.4) 1.07 (27.2) 1.14 (29.0) 1.20 (30.5) 1.26 (32.0) L Dia Max .375 (9.5) .437 (11.1) .500 (12.7) .562 (14.3) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.375 (34.9) G Max .62 (15.7) .68 (17.3) .75 (19.1) .78 (19.8) .88 (22.4) .94 (23.9) 1.00 (25.4) 1.06 (26.9) 1.12 (28.4) H Max .84 (21.3) .91 (23.1) .97 (24.6) 1.03 (26.2) 1.09 (27.7) 1.16 (29.5) 1.22 (31.0) 1.28 (32.5) 1.34 (34.0) TABLE IV: CABLE ENTRY M +.008 (.2) Shrink Boot -.000 (.0) Option T1* .044 (1.1) 202K121-25-0 .044 (1.1) 202K132-25-0 .044 (1.1) 202K132-25-0 .044 (1.1) 202K142-25-0 .044 (1.1) 202K142-25-0 .044 (1.1) 202K153-25-0 .044 (1.1) 202K153-25-0 .069 (1.8) 202K163-25-0 .069 (1.8) 202K163-25-0 .069 (1.8) 202K174-25-0 .069 (1.8) 202K174-25-0 J Max .56 (14.2) .62 (15.7) .69 (17.5) .72 (18.3) .81 (20.6) .87 (22.1) .94 (23.9) 1.00 (25.4) 1.06 (26.9) Shrink Boot Option T2* 202K121-100-0 202K132-100-0 202K132-100-0 202K142-100-0 202K142-100-0 202K153-100-0 202K153-100-0 202K163-100-0 202K163-100-0 202K174-100-0 202K174-100-0 Tinel-Lock® Ring Entry Size 04 05 06 07 08 10 12 14 16 18 20 * Raychem Shrink Boot (Page 41) and Epoxy/Polyamide Two Part Adhesive Paste (S1125) Supplied with "T1" Option (See Part Number Development) ** Raychem Shrink Boot and Hot-Melt/Polyolyfin Adhesive Supplied with "T2" Option (See Part Number Development) - This is a Halogen Free System 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G, and H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. See pages 40 and 41 for Shrink Boot Reference Information. 4. The Tinel-Lock® ring designator must be specified according to the type of cable braid used. Tinel-Lock® rings are marked with thermochromic paint which changes color when the correct installation temperature is reached. BI rings are identified with a red spot. © 2005 Glenair, Inc. CAGE Code 06324 TABLE V: TINEL-LOCK® RING Ring Braid Type Designator Single Layer 36 AWG AI Single Layer 34 AWG AI Single Layer 32 AWG BI Single Layer 30 AWG BI Double Layer 36 AWG BI Double Layer 34 AWG BI Double Layer 32 AWG CI Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 440 - Page 69 www.glenair.com