MIL-C-24308 D-Subminiature 557-180 D-Subminiature Solid Tinel-LockTM Banding Backshell 557 T 180 M 3 B 06 AI Product Series Tinel-LockTM Ring Supplied (Table II - Omit for None) Cable Entry Style T = Top S = Side E = End Dash No. (Table III) Jackscrew Style A = Male Socket Head Screw With Clip B = Male Screw With Clip H = Hex Head Jackscrew With Clip Basic Part Number Finish Symbol (Page 3) Shell Size (Table I) E Typ .30 (7.6) Offset Size 3, 4, 5 D Typ Raychem Tinel-Lock Ring (Optional) .272 (6.9) Typ Style T Top Entry Shell Sizes 3, 4, & 5 Style S Side Entry 1.00 (25.4) .250 (6.3) Typ. © 2004 Glenair, Inc. 1.00 (25.4) Style B Jackscrew Filister Head Connector Shown for Reference Only Style E End Entry Style A Jackscrew Socket Head Style T Top Entry Shell Sizes 1&2 A Typ C Typ 4-40 Thread Typ F B Typ CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-78 MIL-C-24308 D-Subminiature 557-180 D-Subminiature Solid Tinel-LockTM Banding Backshell TABLE I: SHELL SIZE AND CONNECTOR INTERFACE DIMENSIONS Com’l Shell Size 1 2 3 4 5 Shell Size Ref E/09 A/15 B/25 C/37 D/50 C A 1.20 1.53 2.08 2.72 2.63 (30.6) (38.9) (52.8) (69.0) (66.7) B .500 (12.7) .500 (12.7) .500 (12.7) .500 (12.7) .609 (15.5) ±.005 .984 1.312 1.852 2.500 2.406 (.1) (25.0) (33.3) (47.0) (63.5) (61.1) TABLE II: TINEL-LOCK™ RING Ring Braid Type Desig. Single Layer 36 AWG AI Single Layer 34 AWG AI Single Layer 32 AWG BI Single Layer 30 AWG BI Double Layer 36 AWG BI Double Layer 34 AWG BI Double Layer 32 AWG CI .070 (1.8) Thermochromic Paint (Note 3) Tinel-LockTM Ring Option (See Table II) TABLE III: CABLE ENTRY Dash No. D Dia E Dia Max 04 .250 (6.4) .375 (9.5) 05 .312 (7.9) .437 (11.1) 06 .375 (9.5) .500 (12.7) 07 .437 (11.1) .625 (15.9) 08* .500 (12.7) .750 (19.1) * Available in Shell Size 5 Only. F Dim 1.25 (31.8) 1.38 (35.1) 1.38 (35.1) 1.50 (38.1) 1.50 (38.1) Tinel-LockTM Ring Entry Size 04 05 06 08 10 1. Metric dimensions (mm) are indicated in parentheses. 2. DO NOT USE CONNECTORS WITH FLOAT MOUNTINGS. 3. The Tinel-LockTM Ring designator must be specified according to the type of cable braid used. Tinel-LockTM Rings are marked with thermochromic paint which changes color when the correct installation temperature is reached. BI rings are identified with a red spot. CI rings are identified with a blue spot. © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-79