IPT Series Bayonet Lock Connectors IPT 07 A Rear Box Mount Jam Nut Receptacle Connector IPT 07 A 18-11 S Z C XX MIL-C-26482 Series l Type Mod Code Options See Table II 07 - Rear Box Mount Jam Nut Receptacle Contact Type C - Crimp (Omit for Solder Cup) Connector Class A - Non-Environmental Alternate Insert Rotation (W, X, Y, Z) Omit for Normal Shell Size and Insert Arrangements Contact Gender P - Pin S - Socket G APPLICATION NOTES 1. Real box mount jam nut receptacle; No accessory threads. 2. Connector Class “A” (non-environmental). 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. Standard insert is high insulation synthetic rubber. © 2008 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] B-94 www.glenair.com IPT Series Bayonet Lock Connectors IPT 07 A Rear Box Mount Jam Nut Receptacle Connector TABLE I: DIMENSIONS Shell size 8 A ±0.4 B ±1 E min. Max. F Thread in inches G ±0.4 H ±0.4 S ±0.4 17.70 4.8 1.6 3.2 .5625 - 24 UNEF 23.8 19 3.2 10 17.70 4.8 1.6 3.2 .6875 - 24 UNEF 27.0 22 3.2 12 17.70 4.8 1.6 3.2 .8750 - 20 UNEF 31.7 27 3.2 14 17.70 4.8 1.6 3.2 1.0000 - 20 UNEF 34.9 30 3.2 16 17.70 4.8 1.6 3.2 1.1250 - 18 UNEF 38.1 33 3.2 18 17.70 4.8 1.6 3.2 1.2500 - 18 UNEF 41.3 36 3.2 20 22.45 5.6 1.6 6.3 1.3750 - 18 UNEF 46.0 40 4.0 22 22.45 5.6 1.6 6.3 1.5000 - 18 UNEF 49.2 43 4.0 24 23.30 4.8 1.6 6.3 1.6250 - 18 UNEF 52.4 46 4.0 TABLE II: MODIFICATION CODES Shell Finish (Omit for Standard Cad/Olive Drab Finish) Assembly with Accessories (Omit for Standard Version) F2 - Bright Nickel Plating (RoHs) Key Polarization (Omit for N version) W, X, Y, Z = Alternates F6 - Black Electrodeposited Paint (RoHs) N0 - Connector Less Backshell F7 - Black Zn-Co Plating (RoHs) GXXX - Custom Designed Connector F8 - Olive Drab Zn-Co Plating STANDARD FINISHES (For QQ-A-591 Aluminum Shells) Requirements IAW RoHS Not IAW RoHS G3 Cadmium with Olive F8 Zinc Cobalt with F2 Electrolytic Nickel F6 Black Non Conductive F7 Black Conductive Drab Passivation Olive Drab Passivation Thermal Shock Salt Spray After Thermal Shock Electical Conductivity Abrasion Resistance © 2008 Glenair, Inc. -40°C + 100°C -55°C + 125°C -55°C + 125°C -55°C + 125°C -40°C + 100°C 24 hour 500 hour 500 hour 500 hour 200 hour Very Good Very Good NO Very Good Very Good Good Very Good Very Good Good Good U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] B-95 www.glenair.com