38 380-106 EMI/RFI Non-Environmental Backshell Light-Duty with Strain Relief Type C - Self-Locking - Rotatable Coupling - Standard Profile CONNECTOR DESIGNATORS 380 F H 106 M 16 05 L A-F-H-L-S SELF-LOCKING ROTATABLE COUPLING Strain Relief Style (L, G) Connector Designator Cable Entry (Tables IV, V) Shell Size (Table I) Angle and Profile H = 45 J = 90 See page 38-44 for straight TYPE C OVERALL SHIELD TERMINATION A Thread (Table I) Product Series Finish (Table II) Basic Part No. F (Table III) H (Table III) E Typ. (Table I) G (Table III) Anti-Rotation Device (Typ.) J (Table III) 1.00 (25.4) Max STYLE 2 (See Note 1) STYLE L Light Duty (Table IV) STYLE G Light Duty (Table V) .072 (1.8) Max .850 (21.6) Max Cable Range © 2005 Glenair, Inc. Cable Entry K CAGE Code 06324 L Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 38 - Page 46 www.glenair.com 38 380-106 EMI/RFI Non-Environmental Backshell Light-Duty with Strain Relief Type C - Self-Locking - Rotatable Coupling - Standard Profile See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size G F H Conn. Desig. Max Max Max A-F-L-S H .795 (20.2) 1.100 (27.9) .906 (23.0) 08 09 .820 (20.8) 1.130 (28.7) .966 (24.5) 10 11 .844 (21.4) 1.150 (29.2) 1.026 (26.1) 12 13 .861 (21.9) 1.180 (30.0) 1.076 (27.3) 14 15 .888 (22.6) 1.200 (30.5) 1.136 (28.9) 16 17 .904 (23.0) 1.210 (30.7) 1.176 (29.9) 18 19 .929 (23.6) 1.230 (31.2) 1.236 (31.4) 20 21 .956 (24.3) 1.270 (32.3) 1.296 (32.9) 22 23 .979 (24.9) 1.300 (33.0) 1.356 (34.4) 24 25 1.197 (30.4) 1.470 (37.3) 1.636 (41.6) 28 1.294 (32.9) 1.560 (39.6) 1.876 (47.7) 36 1.340 (34.0) 1.600 (40.6) 1.986 (50.4) 40 Dash No. 01 02 03 04 05 06 07 08 09 10 J Max 1.210 (30.7) 1.270 (32.3) 1.330 (33.8) 1.400 (35.6) 1.460 (37.1) 1.480 (37.6) 1.540 (39.1) 1.620 (41.1) 1.690 (42.9) 1.930 (49.0) 2.130 (54.1) 2.240 (56.9) TABLE IV: CABLE ENTRY Cable Range K Max Min Max .781 (19.8) .062 (1.6) .125 (3.2) .968 (24.6) .125 (3.2) .250 (6.4) 1.046 (26.6) .250 (6.4) .375 (9.5) 1.156 (29.4) .250 (6.4) .500 (12.7) 1.218 (30.9) .375 (9.5) .625 (15.9) 1.343 (34.1) .500 (12.7) .750 (19.1) 1.468 (37.3) .625 (15.9) .875 (22.2) 1.593 (40.5) .625 (15.9) 1.000 (25.4) 1.718 (43.6) .750 (19.1) 1.125 (28.6) 1.843 (46.8) .875 (22.2) 1.250 (31.8) Dash No. 01 02 03 04 05 06 07 08 09 10 TABLE II: STANDARD FINISHES GLENAIR SYMBOL B M NF FINISH Cadmium Plate, Olive Drab Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel See Inside Back Cover for Additional Finish Options TABLE V: CABLE ENTRY Cable Entry L Max Max .125 (3.2) .593 (15.1) .250 (6.4) .718 (18.2) .375 (9.5) .843 (21.4) .500 (12.7) .968 (24.6) .625 (15.9) 1.109 (28.2) .750 (19.1) 1.218 (30.9) .875 (22.2) 1.343 (34.1) 1.000 (25.4) 1.468 (37.3) 1.125 (28.6) 1.593 (40.5) 1.250 (31.8) 1.718 (43.6) 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions F, G, H and J will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 38 - Page 47 www.glenair.com