38 380-008 EMI/RFI Non-Environmental Backshell Light-Duty with Strain Relief Type C - Direct Coupling - Standard Profile 380 F H 008 M 16 05 L CONNECTOR DESIGNATORS * A-B -C-D-E-F G-H-J-K-L-S Product Series Strain Relief Style (L, G) Connector Designator Cable Entry (Tables V, VI) Shell Size (Table I) Angle and Profile H = 45 J = 90 See page 38-38 for straight * Conn. Desig. B See Note 3 DIRECT COUPLING Finish (Table II) Basic Part No. TYPE C OVERALL SHIELD TERMINATION A Thread (Table I) J E J G (Table III) (Table IV) (Table III) (Table IV) F (Table IV) B Typ. (Table I) H (Table IV) STYLE L Light Duty (Table V) STYLE G Light Duty (Table VI) .072 (1.8) Max .850 (21.6) Max Cable Range © 2005 Glenair, Inc. Cable Entry K CAGE Code 06324 L Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 38 - Page 40 www.glenair.com 38 380-008 EMI/RFI Non-Environmental Backshell Light-Duty with Strain Relief Type C - Direct Coupling - Standard Profile Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 28/29 32/33 36 40 Elbow Size 01 02 03 04 05 06 07 08 09 10 Dash No. 01 02 03 04 05 06 07 08 09 10 See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. TABLE III: FRONT ADAPTER J Max - Conn. Designator A-E-F D-B-G-K J-H-L-S C 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.735 (44.1) 1.180 (30.0) 1.250 (31.8) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 2.190 (55.6) 1.915 (48.6) TABLE IV: ELBOW DIMENSIONS G F E Max Max Max .750 (19.1) .639 (16.2) 1.100 (27.9) .750 (19.1) .639 (16.2) 1.100 (27.9) .810 (20.6) .664 (16.9) 1.130 (28.7) .870 (22.1) .688 (17.5) 1.150 (29.2) .920 (23.4) .705 (17.9) 1.180 (30.0) .980 (24.9) .732 (18.6) 1.200 (30.5) .748 (19.0) 1.210 (30.7) 1.020 (25.9) .800 (20.3) 1.270 (32.3) 1.140 (29.0) .823 (20.9) 1.300 (33.0) 1.200 (30.5) 1.041 (26.4) 1.470 (37.3) 1.480 (37.6) 1. Metric dimensions (mm) are indicated in parentheses. 2. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 3. When using Connector Designator B refer to pages 18 and 19 for part number development. H Max 1.210 (30.7) 1.210 (30.7) 1.270 (32.3) 1.330 (33.8) 1.400 (35.6) 1.460 (37.1) 1.480 (37.6) 1.620 (41.1) 1.690 (42.9) 1.930 (49.0) TABLE V: CABLE ENTRY Cable Range K Max Min Max .781 (19.8) .062 (1.6) .125 (3.2) .968 (24.6) .125 (3.2) .250 (6.4) 1.046 (26.6) .250 (6.4) .375 (9.5) 1.156 (29.4) .250 (6.4) .500 (12.7) 1.218 (30.9) .375 (9.5) .625 (15.9) 1.343 (34.1) .500 (12.7) .750 (19.1) 1.468 (37.3) .625 (15.9) .875 (22.2) 1.593 (40.5) .625 (15.9) 1.000 (25.4) 1.718 (43.6) .750 (19.1) 1.125 (28.6) 1.843 (46.8) .875 (22.2) 1.250 (31.8) © 2005 Glenair, Inc. CAGE Code 06324 TABLE II: STANDARD FINISHES GLENAIR SYMBOL B M NF FINISH Cadmium Plate, Olive Drab Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel See Inside Back Cover for Additional Finish Options Dash No. 01 02 03 04 05 06 07 08 09 10 TABLE VI: CABLE ENTRY Cable Entry L Max Max .125 (3.2) .593 (15.1) .250 (6.4) .718 (18.2) .375 (9.5) .843 (21.4) .500 (12.7) .968 (24.6) .625 (15.9) 1.109 (28.2) .750 (19.1) 1.218 (30.9) .875 (22.2) 1.343 (34.1) 1.000 (25.4) 1.468 (37.3) 1.125 (28.6) 1.593 (40.5) 1.250 (31.8) 1.718 (43.6) Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 38 - Page 41 www.glenair.com