Micro-D Harness Micro-D Metal Shell MWDM Back-To-Back Unshielded Cable Assemblies Save Time and Money With Back-To-Back Cables– These Micro-D connectors feature crimp wire terminations and epoxy encapsulation. The installed cost is lower than terminating solder cup connectors. A B 100% Certified– all back-to-back assemblies are 100% checked for continuity, resistance, voltage and insulation resistance. Hardware Note– if jackposts are required on one end and jackscrews on the other, use hardware designator “B” (no hardware installed), and order hardware kits separately. how to order back-to-back unshielded cables Series Shell Material Insulator Contact and Finish Material Layout MWDM Aluminum Shell L – LCP 1 – Cadmium 30% GlassFilled Liquid 2 – Nickel Crystal 4 – Black Anodize Polymer 5 – Gold 6 – Chem Film Stainless Steel Shell 3 – 9 15 21 25 31 37 51 51-2 67 69 100 Wire Gage (AWG) Connect or Type GP–Pin (Plug) Connector Both Ends GS–Socket (Receptacle) Connector Both Ends CS–Pin Connector to Socket Connector Wire Type 4 – #24 6 – #26 8 – #28 0 – #30 K – M22759/11 600 Vrms Teflon (TFE) Wire Color 1 – White 2 – Yellow 7 – Ten Color Repeating J – M22759/33 600 Vrms Modified CrossLinked Tefzel® (ETFE) 5 – Color-Coded E – NEMA HP3-EB (Striped wire not available on 67, 69 or 100 pin connectors or for #28, #30 AWG) 600 VrmsType E M16878/4 (TFE) (replaced by M22759/11 for mil spec applications) Passivated Stripes Per MIL-STD-681 Total Length Inches Hardware Total Length In Inches. “18” Specifies 18 Inches (2” Min.) 18 B P M M1 S S1 L K 18 B Sample Part Number MWDM 1 L – 25 GP – 6 K 7 – MICRO-D MOUNTING HARDWARE B P M M1 S S1 L K Thru-Hole Jackpost Jackscrew Jackscrew Jackscrew Jackscrew Jackscrew Jackscrew Order Hardware Separately Removable Includes Nut and Washer © 2006 Glenair, Inc. Rev. 8-06 Hex Head Removable E-ring Hex Head Removable E-ring Extended Slot Head Removable E-ring CAGE Code 06324/0CA77 Slot Head Removable E-ring Extended Hex Head Non- Removable Slot Head NonRemovable Extended Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-6 E-Mail: [email protected] Micro-D Metal Shell MWDM Back-To-Back Unshielded Cable Assemblies PERFORMANCE SPECIFICATIONS MATERIALS AND FINISHES Current Rating 3 AMP DWV Insulation Resistance Contact Resistance Low Level Contact Resist. Magnetic Permeability Operating Temperature Shock, Vibration Mating Force 600 VAC Sea level 5000 Megohms Minimum 8 Milliohms Maximum 32 Milliohms Maximum 2 μ Maximum -55° C. to +150° C. 50 g., 20g. (10 Ounces) X (# of Contacts) A B C E Connector Shell Aluminum Alloy 6061 or Stainless Steel, 300 Series, passivated. See Ordering Info for Plating Options Insulator Interfacial Seal Pin Contact Socket Contact Hardware Encapsulant Liquid Crystal Polymer (LCP) Flourosilicone Rubber, Blue Beryllium Copper Gold over Nickel Plating Copper Alloy Gold Over Nickel Plating 300 Series Stainless Steel Epoxy Resin Hysol EE4215 F WIRE LENGTH +1.0/-0.0 (+25.4/-0.0) G D B J .093 ± .005 (2.36 ± 0.13) 9-69 CONTACTS .096/.088 (2.43/2.23) DIA. 100 CONTACTS .150/.145 (3.81/3.68) DIA. H DIMENSIONS A Max. Layout 9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S 51P 51S 51-2P 51-2S 67P 67S 69P 69S 100P 100S B C Max. In . mm. In. mm. ± .003 ± 0.08 .785 .785 .935 .935 1.085 1.085 1.185 1.185 1.335 1.335 1.485 1.485 1.435 1.435 1.835 1.835 2.235 2.235 1.735 1.735 2.170 2.170 19.94 19.94 23.75 23.75 27.56 27.56 30.01 30.01 33.91 33.91 37.72 37.72 36.45 36.45 46.61 46.61 56.77 56.77 44.07 44.07 55.12 55.12 .565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265 1.215 1.215 1.615 1.615 2.015 2.015 1.515 1.515 1.800 1.800 14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13 30.86 30.86 41.02 41.02 51.18 51.18 38.48 38.48 45.72 45.72 © 2006 Glenair, Inc. In. mm. .333 .400 .483 .551 .633 .701 .733 .801 .883 .951 1.033 1.101 .983 1.051 1.384 1.450 1.784 1.850 1.284 1.350 1.383 1.451 8.46 10.16 12.27 14.00 16.08 17.81 18.62 20.35 22.43 24.16 26.24 27.96 24.97 26.70 35.15 36.83 45.31 46.99 32.61 34.29 35.13 36.86 D Max. In. .184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .224 .293 .184 .250 .184 .250 .224 .293 .270 .333 mm. 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 5.69 7.44 4.67 6.35 4.67 6.35 5.69 7.44 6.86 8.46 E Max. In. .308 .308 .308 .308 .308 .308 .308 .308 .308 .308 .308 .308 .351 .351 .310 .310 .310 .310 .351 .351 .394 .394 F G Max. In. mm. mm. ± .003 ± 0.08 7.82 7.82 7.82 7.82 7.82 7.82 7.82 7.82 7.82 7.82 7.82 7.82 8.92 8.92 7.87 7.87 7.87 7.87 8.92 8.92 10.01 10.01 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 CAGE Code 06324/0CA77 In. .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 H Max. J Max. mm. In. mm. In. 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 .400 .400 .550 .550 .700 .700 .800 .800 .950 .950 1.100 1.100 1.050 1.050 1.450 1.450 1.850 1.850 1.350 1.350 1.442 1.442 10.16 10.16 13.97 13.97 17.78 17.78 20.32 20.32 24.13 24.13 27.94 27.94 26.67 26.67 36.83 36.83 36.83 36.83 34.29 34.29 36.63 36.63 .270 .270 .270 .270 .270 .270 .270 .270 .270 .270 .270 .270 .310 .310 .270 .270 .270 .270 .310 .310 .360 .360 mm. 6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 7.87 7.87 6.86 6.86 6.86 6.86 7.87 7.87 9.14 9.14 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-7 E-Mail: [email protected]