MIL-PRF28876 180-040 (-03, -13, -23, -33) MIL-PRF-28876 Type Wall Mount Receptacle Connector for use with MIL-PRF-29504/14 and /15 Termini D E (See Note 3) 1.99 (50.5) Max. Master Polarizing Key Way .898 (22.8) .878 (22.3) .125 (3.2) .105 (2.7) .130 (3.3) 4X .115 (2.9) Dia. A° C Dia. B° E 1 2 34 D 3 Wire Holes C .188 (4.8) Max. Panel Thickness Yellow Band D ° "A" Thread Size C° 03 - WALL MOUNT RECEPTACLE WITHOUT BACKSHELL .130 (3.3) 4X .115 (2.9) Dia. E 6.150 (156.2) Max L Dia E F Dia. RECOMMENDED PANEL CUT-OUT 13 - WALL MOUNT RECEPTACLE WITH STRAIGHT BACKSHELL TABLE Vl: SHELL SIZE Shell Size © 2010 Glenair, Inc. D + .020 (0.5) F Dia + .005 (0.1) E C Dia Max L Dia Max “A” Thread Size .1P-.2L-DS 11 1.022 (26.0) .750 (19.1) .812 (20.6) .960 (24.4) .960 (24.4) 13 1.137 (28.9) .843 (21.4) .937 (23.8) 1.085 (27.6) 1.085 (27.6) .875 (22.2) 15 1.257 (31.9) .968 (24.6) 1.124 (28.5) 1.255 (31.9) 1.255 (31.9) 1.062 (26.9) 23 1.718 (43.6) 1.281 (32.5) 1.562 (39.7) 1.695 (43.1) 1.763 (44.8) 1.500 (38.1) CAGE Codes 06324 .750 (19.05) Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 C-6 E-Mail: [email protected] www.glenair.com MIL-PRF28876 180-040 (-06, -16, -26, -36) MIL-PRF-28876 Type Plug Connector for use with MIL-PRF-29504/14 and /15 Termini B Dia. 1.870 (47.5)Max. “A” Thread Size with Dry Film Lube Coating Master Polarizing Key A° See Note 3 Alignment Pin B° C Dia. B Dia Max 2 1 4 3 3 Wire Holes D° Yellow Band Coupling Nut C° 06 - PLUG WITHOUT STRAIGHT BACKSHELL L Dia 5.960 (151.4) Max 16 - PLUG WITH STRAIGHT BACKSHELL (Consult Factory for 45° and 90° Backshell Versions) TABLE VI: SHELL SIZE Shell Size © 2010 Glenair, Inc. B Dia Max C Dia Max L Dia Max “A” Thread Size .1P-.2L-DS 11 1.028 (26.1) .960 (24.4) .960 (24.4) .750 (19.05) 13 1.141 (29.0) 1.085 (27.6) 1.085 (27.6) .875 (22.2) 15 1.263 (32.1) 1.255 (31.9) 1.255 (31.9) 1.062 (26.9) 23 1.705 (43.3) 1.695 (43.1) 1.763 (44.8) 1.500 (38.1) CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 C-7 E-Mail: [email protected] www.glenair.com C MIL-PRF28876 180-040 (-04, -14, -24, -34) MIL-PRF-28876 Type Jam Nut Receptacle Connector for use with MIL-PRF-29504/14 and /15 Termini 1.990 (50.5) Max. Master Polarizing Key Way 1.033 (26.2) 1.013 (25.7) .125 (3.2) .105 (2.7) (See Note 3) "A" Thread Size A° G Hex Corner B° H Flat C Dia. 1 2 34 C C° 3 Wire Holes Yellow Band D° .188 (4.8) Max. Panel Thickness 04 - JAM NUT MOUNT RECEPTACLE WITHOUT BACKSHELL J Flat 6.150 Max L Dia K Dia. 14 - JAM NUT MOUNT RECEPTACLE WITH STRAIGHT BACKSHELL (Consult Factory for 45° and 90° Backshell Versions) RECOMMENDED PANEL CUTOUT TABLE VI: SHELL SIZE Shell Size © 2010 Glenair, Inc. G Max H + .010 (0.3) J + .005 (0.1) K Dia + .005 (0.1) C Dia Max L Dia Max “A” Thread Size .1P-.2L-DS 11 1.290 (32.8) 1.262 (32.1) .848 (21.5) .885 (22.5) .960 (24.4) .960 (24.4) .750 (19.05) 13 1.435 (35.9) 1.387 (35.2) .937 (24.7) 1.010 (25.7) 1.085 (27.6) 1.085 (27.6) .875 (22.2) 15 1.650 (41.9) 1.575 (40.0) 1.160 (29.5) 1.198 (30.4) 1.255 (31.9) 1.255 (31.9) 1.062 (26.9) 23 2.093 (53.2) 2.014 (51.2) 1.598 (40.6) 1.635 (41.5) 1.695 (43.1) 1.763 (44.8) 1.500 (38.1) CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 C-8 E-Mail: [email protected] www.glenair.com