UF3A – UF3K WTE POWER SEMICONDUCTORS Pb 3.0A SURFACE MOUNT GLASS PASSIVATED ULTRAFAST DIODE Features ! Glass Passivated Die Construction ! ! ! ! ! ! Ideally Suited for Automatic Assembly B Low Forward Voltage Drop, High Efficiency Surge Overload Rating to 100A Peak Low Power Loss A Ultra-Fast Recovery Time F Plastic Case Material has UL Flammability Classification Rating 94V-O C H G E SMC/DO-214AB Dim Min Max 5.59 6.22 A 6.60 7.11 B 2.75 3.25 C 0.152 0.305 D 7.75 8.13 E 2.00 2.62 F 0.051 0.203 G 0.76 1.27 H All Dimensions in mm Mechanical Data ! ! ! ! ! ! Case: SMC/DO-214AB, Molded Plastic Terminals: Solder Plated, Solderable per MIL-STD-750, Method 2026 Polarity: Cathode Band or Cathode Notch Marking: Type Number Weight: 0.21 grams (approx.) Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 4 Maximum Ratings and Electrical Characteristics Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @TA=25°C unless otherwise specified Symbol UF3A UF3B UF3D UF3G UF3J UF3K Unit VRRM VRWM VR 50 100 200 400 600 800 V VR(RMS) 35 70 140 280 420 560 V IO 3.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 100 A Forward Voltage @IF = 3.0A VFM @TA = 25°C @TA = 100°C IRM Peak Reverse Current At Rated DC Blocking Voltage @TL = 75°C D 1.0 1.4 1.7 10 500 V µA Reverse Recovery Time (Note 1) trr 50 100 nS Typical Junction Capacitance (Note 2) Cj 75 50 pF Typical Thermal Resistance (Note 3) Operating and Storage Temperature Range RJL 15 °C/W Tj, TSTG -50 to +150 °C Note: 1. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See figure 5. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0 V DC. 3. Mounted on P.C. Board with 8.0mm2 land area. UF3A – UF3K 1 of 4 © 2006 Won-Top Electronics IF, INSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE FORWARD CURRENT (A) 3.0 1.5 0 25 50 75 100 125 150 10 UF3A - UF3D UF3G 1.0 UF3J - UF3K 0.1 Tj - 25°C Pulse Width = 300µs 0.01 0 100 Single Half Sine-Wave (JEDEC Method) 75 50 25 Tj = 150°C 0 1 10 0.8 1.2 1.6 2.0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics IR, INSTANTANEOUS REVERSE CURRENT (mA) IFSM, PEAK FORWARD SURGE CURRENT (A) TL , LEAD TEMPERATURE ( ° C) Fig. 1 Forward Current Derating Curve 0.4 1000 100 Tj = 100°C 10 1.0 Tj = 25°C 0.1 0.01 0 100 NUMBER OF CYCLES AT 60Hz Fig. 3 Forward Surge Current Derating Curve 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics trr +0.5A 50Ω NI (Non-inductive) 10Ω NI Device Under Test (-) 0A (+) Pulse Generator (Note 2) 50V DC Approx (-) 1.0Ω NI Oscilloscope (Note 1) -0.25A (+) Notes: 1. Rise Time = 7.0ns max. Input Impedance = 1.0MΩ, 22pF. 2. Rise Time = 10ns max. Input Impedance = 50Ω. -1.0A Set time base for 10ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit UF3A – UF3K 2 of 4 © 2006 Won-Top Electronics MARKING INFORMATION RECOMMENDED FOOTPRINT 0.060 MIN (1.52 MIN) WTE UF3x Cathode WTE UF3x x 0.121 MIN (3.07 MIN) = Polarity Band = Manufacturer’s Logo = Device Number = A, B, D, G, J or K 0.185 MAX (4.69 MAX) inches(mm) PACKAGING INFORMATION TAPE & REEL Direction of Unreeling 8mm 330mm 16mm 1.6mm 4mm 16mm Product ID Label Reel Diameter (mm) Quantity (PCS) Inner Box Size L x W x H (mm) Quantity (PCS) Carton Size L x W x H (mm) Quantity (PCS) Approx. Gross Weight (KG) 330 3,000 340 x 337 x 45 6,000 370 x 370 x 420 48,000 19.0 Note: 1. Paper reel, white or gray color. 2. Components are packed in accordance with EIA standard 481-1 and 481-2. UF3A – UF3K 3 of 4 © 2006 Won-Top Electronics ORDERING INFORMATION Product No. Package Type Shipping Quantity UF3A-T3 SMC 3000/Tape & Reel UF3B-T3 SMC 3000/Tape & Reel UF3D-T3 SMC 3000/Tape & Reel UF3G-T3 SMC 3000/Tape & Reel UF3J-T3 SMC 3000/Tape & Reel UF3K-T3 SMC 3000/Tape & Reel 1. 2. Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. To order RoHS / Lead Free version (with Lead Free finish), add “-LF” suffix to part number above. For example, UF3A-T3-LF. Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: [email protected] Internet: http://www.wontop.com We power your everyday. UF3A – UF3K 4 of 4 © 2006 Won-Top Electronics