WTE UF2J-T1

UF2A – UF2K
W TE
PO WE R SEM IC O ND U C TO RS
2.0A SURFACE MOUNT ULTRA FAST RECTIFIER
Features
!
Glass Passivated Die Construction
!
!
!
!
!
!
Ideally Suited for Automatic Assembly
Low Forward Voltage Drop, High Efficiency
Surge Overload Rating to 50A Peak
Low Power Loss
Ultra-Fast Recovery Time
Plastic Case Material has UL Flammability
Classification Rating 94V-O
B
D
A
F
C
H
SMB/DO-214AA
Dim
Min
Max
A
3.30
3.94
B
4.06
4.70
C
1.91
2.11
D
0.152
0.305
E
5.08
5.59
F
2.13
2.44
G
0.051
0.203
H
0.76
1.27
All Dimensions in mm
Mechanical Data
!
!
!
!
!
Case: Molded Plastic
Terminals: Solder Plated, Solderable
per MIL-STD-750, Method 2026
Polarity: Cathode Band or Cathode Notch
Marking: Type Number
Weight: 0.093 grams (approx.)
Maximum Ratings and Electrical Characteristics
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Rectified Output Current
@TA=25°C unless otherwise specified
Symbol
UF2A
UF2B
UF2D
UF2G
UF2J
UF2K
Unit
VRRM
VRWM
VR
50
100
200
400
600
800
V
VR(RMS)
35
70
140
280
420
560
V
IO
2.0
A
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave superimposed on
rated load (JEDEC Method)
@TA = 55°C
IFSM
50
A
Forward Voltage
@IF = 2.0A
VFM
@TA = 25°C
@TA = 100°C
IRM
Peak Reverse Current
At Rated DC Blocking Voltage
@TL = 90°C
G
E
1.0
1.4
1.7
10
500
µA
Reverse Recovery Time (Note 1)
trr
Typical Junction Capacitance (Note 2)
Cj
50
pF
RJL
20
K/W
Tj, TSTG
-50 to +150
°C
Typical Thermal Resistance (Note 3)
Operating and Storage Temperature Range
50
V
100
nS
Note: 1. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A,
2. Measured at 1.0 MHz and applied reverse voltage of 4.0 V DC.
3. Mounted on P.C. Board with 8.0mm2 land area.
UF2A – UF2K
1 of 3
© 2002 Won-Top Electronics
1.0
0
25
50
75
100
125
150
IF, INSTANTANEOUS FORWARD CURRENT (A)
I(AV), AVERAGE FORWARD CURRENT (A)
2.0
10
UF2A - UF2D
UF2G
1.0
UF2J - UF2K
0.1
Tj - 25°C
Pulse Width = 300µs
0.01
0
60
Single Half Sine-Wave
(JEDEC Method)
45
30
15
Tj = 150°C
0
1
10
0.8
1.2
1.6
2.0
VF, INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 2 Typical Forward Characteristics
IR, INSTANTANEOUS REVERSE CURRENT (mA)
IFSM, PEAK FORWARD SURGE CURRENT (A)
TL , LEAD TEMPERATURE
( ° C)
Fig. 1 Forward Current Derating Curve
0.4
1000
100
Tj = 100°C
10
1.0
Tj = 25°C
0.1
0.01
0
100
NUMBER OF CYCLES AT 60Hz
Fig. 3 Forward Surge Current Derating Curve
20
40
60
80
100
120
140
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
Fig. 4 Typical Reverse Characteristics
trr
+0.5A
50Ω NI (Non-inductive)
10Ω NI
Device
Under
Test
(-)
0A
(+)
Pulse
Generator
(Note 2)
50V DC
Approx
(-)
1.0Ω
NI
Oscilloscope
(Note 1)
-0.25A
(+)
Notes:
1. Rise Time = 7.0ns max. Input Impedance = 1.0MΩ, 22pF.
2. Rise Time = 10ns max. Input Impedance = 50Ω.
-1.0A
Set time base for 10ns/cm
Fig. 5 Reverse Recovery Time Characteristic and Test Circuit
UF2A – UF2K
2 of 3
© 2002 Won-Top Electronics
ORDERING INFORMATION
Product No.!
Package Type
Shipping Quantity
UF2A-T1
SMB
500/Tape & Reel
UF2A-T3
SMB
3000/Tape & Reel
UF2B-T1
SMB
500/Tape & Reel
UF2B-T3
SMB
3000/Tape & Reel
UF2D-T1
SMB
500/Tape & Reel
UF2D-T3
SMB
3000/Tape & Reel
UF2G-T1
SMB
500/Tape & Reel
UF2G-T3
SMB
3000/Tape & Reel
UF2J-T1
SMB
500/Tape & Reel
UF2J-T3
SMB
3000/Tape & Reel
UF2K-T1
SMB
500/Tape & Reel
UF2K-T3
SMB
3000/Tape & Reel
Products listed in bold are WTE Preferred devices.
!
T1 suffix refers to a 7” reel. T3 suffix refers to a 13” reel.
Shipping quantity given is for minimum packing quantity only. For minimum order
quantity, please consult the Sales Department.
RECOMMENDED FOOTPRINT
0.050 MIN
(1.27 MIN)
0.082 MIN
(2.10 MIN)
0.106 MAX
(2.69 MAX)
inches(mm)
Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any
responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to
manufacturer. WTE reserves the right to change any or all information herein without further notice.
WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life
support devices or systems without the express written approval.
Won-Top Electronics Co., Ltd.
No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan
Phone: 886-7-822-5408 or 886-7-822-5410
Fax: 886-7-822-5417
Email: [email protected]
Internet: http://www.wontop.com
UF2A – UF2K
We power your everyday.
3 of 3
© 2002 Won-Top Electronics