400-015 TAG Ring Backshell 40 ® with Strain Relief Self-Locking Rotatable Coupling - Split Shell 400 F D 015 M 16 06 L CONNECTOR DESIGNATORS A-F-H-L-S SELF-LOCKING ROTATABLE COUPLING A Thread (Table I) Product Series Strain Relief Style (F, G, L) Connector Designator Cable Entry (Table IV, V) Shell Size (Table I) Angle and Profile C = Ultra-Low Split 90 D = Split 90 F = Split 45 Finish (Table II) Basic Part No. M (Table III) H (Table III) F (Table III) K (Table III) G (Table III) E Typ. (Table I) AntiRotation Device (Typ.) J (Table Max III) Wire Bundle (Table III, Note 1) Ground Spring Split 45° Cable Entry L (Table III) N (Table IV) P (Table V) 1.00 (25.4) Max STYLE 2 (See Note 1) STYLE F Light Duty (Table V) .416 (10.5) Approx. Cable Range © 2005 Glenair, Inc. Ultra LowProfile Split 90° Split 90° P CAGE Code 06324 STYLE G Light Duty (Table IV) STYLE L Light Duty (Table V) .072 (1.8) Approx. Cable Entry N .850 (21.6) Approx. Cable Range P Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 40 - Page 20 400-015 TAG Ring Backshell 40 ® with Strain Relief Self-Locking Rotatable Coupling - Split Shell See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: DIMENSIONS Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 Dash No. 02 03 04 05 06 07 08 09 10 F Max .596 (15.1) .656 (16.7) .716 (18.2) .776 (19.7) .836 (21.2) .906 (23.0) .976 (24.8) 1.036 (26.3) 1.096 (27.8) G Max 1.500 (38.1) 1.560 (39.6) 1.630 (41.4) 1.660 (42.2) 1.760 (44.7) 1.820 (46.2) 1.880 (47.8) 1.940 (49.3) 2.000 (50.8) H Max .836 (21.2) .906 (23.0) .966 (24.5) 1.026 (26.1) 1.086 (27.6) 1.156 (29.4) 1.216 (30.9) 1.276 (32.4) 1.336 (33.9) TABLE IV: CABLE ENTRY N Cable Entry Max Max .545 (13.8) .250 (6.4) .670 (17.0) .375 (9.5) .795 (20.2) .500 (12.7) .920 (23.4) .625 (15.9) 1.045 (26.5) .750 (19.1) 1.170 (29.7) .875 (22.2) 1.295 (32.9) 1.000 (25.4) 1.420 (36.1) 1.125 (28.6) 1.670 (42.4) 1.250 (31.8) J Max 1.440 (36.6) 1.500 (38.1) 1.570 (39.9) 1.600 (40.6) 1.700 (43.2) 1.760 (44.7) 1.820 (46.2) 1.880 (47.8) 1.940 (49.3) Dash No. 02 03 04 05 06 07 08 09 10 K Ref .496 (12.6) .426 (10.8) .426 (10.8) .436 (11.1) .576 (14.6) .796 (20.2) .796 (20.2) .696 (17.7) .696 (17.7) L Max 2.060 (52.3) 2.220 (56.4) 2.220 (56.4) 2.290 (58.2) 2.340 (59.4) 2.370 (60.2) 2.370 (60.2) 2.520 (64.0) 2.520 (64.0) M Max .837 (21.3) .887 (22.5) .887 (22.5) .987 (25.1) 1.137 (28.9) 1.337 (34.0) 1.337 (34.0) 1.337 (34.0) 1.337 (34.0) TABLE V: CABLE ENTRY P Cable Max Min .968 (24.6) .125 (3.2) 1.046 (26.6) .250 (6.4) 1.156 (29.4) .250 (6.4) 1.218 (30.9) .375 (9.5) 1.343 (34.1) .500 (12.7) 1.468 (37.3) .625 (15.9) 1.593 (40.5) .625 (15.9) 1.718 (43.6) .750 (19.1) 1.843 (46.8) .875 (22.2) Function C Max Wire Bundle .250 (6.4) .375 (9.5) .375 (9.5) .500 (12.7) .625 (15.9) .625 (15.9) .625 (15.9) .750 (19.1) .750 (19.1) Range Max .250 (6.4) .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied (not available in Function C). Dimensions F, G, H and J will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Angular function "C", low-profile split elbow, not available with "S" connector designator. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 40 - Page 21