440 440-073 EMI/RFI Banding Adapter Rotatable Coupling - Split Shell 440 F D 073 NF 16 12 K P CONNECTOR DESIGNATORS A-F-H-L-S ROTATABLE COUPLING Product Series Polysulfide (Omit for none) Connector Designator B = Band K = Precoiled Band (Omit for none) Angle and Profile C = Ultra-Low Split 90 D = Split 90 F = Split 45 Cable Entry (Table IV) Shell Size (Table I) Basic Part No. Finish (Table II) D (Table III) A Thread (Table I) F (Table III) E (Table III) C Typ. (Table I) G (Table III) Split 90° Split 45° Termination Area Free of Cadmium. Knurl or Ridges Mfr's Option L* K (Table III) M* H (Table III) * (Table IV) Ultra LowProfile Split 90° Polysulfide Stripes P Option Max Wire Bundle (Table III, Note 1) .88 (22.4) Max J (Table III) .380 (9.7) Typ. STYLE 2 (See Note 1) © 2005 Glenair, Inc. Band Option (K Option Shown See Note 3) CAGE Code 06324 .060 (1.5) Typ. Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 440 - Page 48 www.glenair.com 440 440-073 EMI/RFI Banding Adapter Rotatable Coupling - Split Shell See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 D Max .440 (11.2) .500 (12.7) .560 (14.2) .620 (15.7) .680 (17.3) .750 (19.1) .820 (20.8) .880 (22.4) .940 (23.9) E Max 1.590 (40.4) 1.650 (41.9) 1.720 (43.7) 1.750 (44.5) 1.850 (47.0) 1.910 (48.5) 1.970 (50.0) 2.030 (51.6) 2.090 (53.1) F Max .680 (17.3) .750 (19.1) .810 (20.6) .870 (22.1) .930 (23.6) 1.000 (25.4) 1.060 (26.9) 1.120 (28.4) 1.180 (30.0) G Max 1.530 (38.9) 1.590 (40.4) 1.660 (42.2) 1.690 (42.9) 1.790 (45.5) 1.850 (47.0) 1.910 (48.5) 1.970 (50.0) 2.030 (51.6) TABLE IV: CABLE ENTRY L M Dash Dia Dia No. .125 (3.2) .250 (6.4) 02 .188 (4.8) .312 (7.9) 03 .250 (6.4) .375 (9.5) 04 .312 (7.9) .438 (11.1) 05 .375 (9.5) .500 (12.7) 06 .438 (11.1) .562 (14.3) 07 .500 (12.7) .625 (15.9) 08 .562 (14.3) .688 (17.5) 09 .625 (15.9) .750 (19.1) 10 .688 (17.5) .812 (20.6) 11 .750 (19.1) .875 (22.2) 12 .812 (20.6) .938 (23.8) 13 .875 (22.2) 1.000 (25.4) 14 .938 (23.8) 1.062 (27.0) 15 16 1.000 (25.4) 1.125 (28.6) 17 1.062 (27.0) 1.188 (30.2) 18 1.125 (28.6) 1.250 (31.8) 20 1.250 (31.8) 1.375 (34.9) 22 1.375 (34.9) 1.500 (38.1) 24 1.500 (38.1) 1.625 (41.3) © 2005 Glenair, Inc. H Ref .340 (8.6) .270 (6.9) .270 (6.9) .280 (7.1) .420 (10.7) .640 (16.3) .640 (16.3) .540 (13.7) .540 (13.7) J Max 1.870 (47.5) 2.030 (51.6) 2.030 (51.6) 2.100 (53.3) 2.150 (54.6) 2.180 (55.4) 2.180 (55.4) 2.330 (59.2) 2.330 (59.2) Function C Max K Wire Bundle Max .250 (6.4) .681 (17.3) .375 (9.5) .731 (18.6) .375 (9.5) .731 (18.6) .500 (12.7) .831 (21.1) .625 (15.9) .981 (24.9) .625 (15.9) 1.181 (30.0) .625 (15.9) 1.181 (30.0) .750 (19.1) 1.181 (30.0) .750 (19.1) 1.181 (30.0) 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied (not available on Function C). Dimensions D, E, F and G will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Backshells supplied with 600-052-* band, see Glenair Series 600 Tool Catalog for installation. 4. Angular function "C", low-profile split elbow, not available with "S" connector designator. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 440 - Page 49 www.glenair.com