GLENAIR 231-104

Bulkhead
Feed-Thrus
231-104-07
Jam Nut Environmental Bulkhead Feed-Thru
MIL-DTL-38999 Series I Type
Shell Size
09
11
13
15
17
19
21
23
25
Connector Series
231 - D38999 Series I Type
Shell Style
07 - Jam Nut Mount
J
Insert Arrangement
Per MIL-DTL-38999 Series I
MIL-STD-1560
H
.585
Ref
Alternate Key
Position
A, B, C, D
(N = Normal)
B
231 - 104 - 07 M 11 - 35 P N - 01
A Thread
Hole for .032 Dia
Safety Wire, 3 Equally
Spaced
.125
Connector Type
104 - Env. Bulkhead Feed-Thru
.150 Max
Panel Accomodation
01 - .0625″ (Min) .125″ (Max)
02 - .0625″ (Min) .250″ (Max)
03 - .0625″ (Min) .500″ (Max)
Connector Material and Finish
M - Aluminum / Electroless Nickel
NC - Aluminum / Zinc-Cobalt
NF - Cad / O.D. Over Electroless Nickel (1000hr Salt Spray)
ZN - Aluminum Zinc-Nickel Olive Drab
MT - Aluminum / Ni-PTFE 1000 Hour GreyTM
AL - Aluminum / Pure Electrodeposited Aluminum
C
Contact Termination
P - Pin on Jam Nut Side
S - Socket on Jam Nut Side
D
TABLE I: CONNECTOR DIMENSIONS
SHELL
SIZE
E
A THREAD
CLASS 2A
Panel
Accomodation
B DIA
MAX
C
HEX
D
FLATS
E DIA
±.005(0.1)
F +.000-.005
(0-0.1)
09
.688-24 UNEF
.573(14.6)
.875(22.2)
1.062(27.0)
.703(17.9)
.669(17.0)
11
.813-20 UNEF
.701(17.8)
1.000(25.4)
1.250(31.8)
.827(21.0)
.769(19.5)
13
1.000-20 UNEF
.851(21.6)
1.188(30.2)
1.375(34.9)
1.015(25.8)
.955(24.3)
15
1.125-18 UNEF
.976(24.8)
1.312(33.3)
1.500(38.1)
1.140(29.0)
1.084(27.5)
17
1.250-18 UNEF
1.101(28.0)
1.438(36.5)
1.625(41.3)
1.265(32.1)
1.208(30.7)
19
1.375-18 UNEF
1.208(30.7)
1.562(39.7)
1.812(46.0)
1.390(35.3)
1.333(33.9)
21
1.500-18 UNEF
1.333(33.9)
1.688(42.9)
1.938(49.2)
1.515(38.5)
1.459(37.1)
23
1.625-18 UNEF
1.458(37.0)
1.812(46.0)
2.062(52.4)
1.640(41.7)
1.580(40.1)
25
1.750-18 UNS
1.583(40.2)
2.000(50.8)
2.188(55.6)
1.765(44.8)
1.709(43.4)
Insert arrangement, per
MIL-C-38999, Series l
MIL-STD-1560
E
Dia
F
Recommended Panel Cut-Out
APPLICATION NOTES
1.
Power to a given contact on one end will result in power to contact
directly opposite regardless of identification letter
2.
Metric Dimensions (mm) are indicated in parentheses
3.
Material/finish:
Shell, lockring, jam nut—Al alloy, See Table II Page D-5
© 2008 Glenair, Inc.
CAGE CODE 06324
Contacts—Copper alloy/gold plate
Insulators—High grade rigid dielectric/N.A.
Bayonet Pins—CRES/passivate
Seals—silicone/N.A.
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com E-4
E-Mail: [email protected]