BUK6208-40C N-channel TrenchMOS intermediate level FET Rev. 01 — 9 April 2010 Objective data sheet 1. Product profile 1.1 General description Intermediate level gate drive N-channel enhancement mode Field-Effect Transistor (FET) in a plastic package using advanced TrenchMOS technology. This product has been designed and qualified to the appropriate AEC Q101 standard for use in high performance automotive applications. 1.2 Features and benefits AEC Q101 compliant Suitable for intermediate level gate drive sources Suitable for thermally demanding environments due to 175 °C rating 1.3 Applications 12 V Automotive systems Start-Stop micro-hybrid applications Electric and electro-hydraulic power steering Transmission control Motors, lamps and solenoid control Ultra high performance power switching 1.4 Quick reference data Table 1. Quick reference data Symbol Parameter Conditions Min Typ Max Unit VDS drain-source voltage Tj ≥ 25 °C; Tj ≤ 175 °C - - 40 V ID drain current VGS = 10 V; Tmb = 25 °C - - 50 A Ptot total power dissipation Tmb = 25 °C; see Figure 1 - - 128 W VGS = 10 V; ID = 25 A; Tj = 25 °C - 6.6 8 mΩ - - 210 mJ - - - nC [1] Static characteristics RDSon drain-source on-state resistance Avalanche ruggedness EDS(AL)S non-repetitive ID = 50 A; Vsup ≤ 40 V; drain-source RGS = 50 Ω; VGS = 10 V; avalanche energy Tj(init) = 25 °C; unclamped Dynamic characteristics QGD gate-drain charge ID = 25 A; VDS = 32 V; VGS = 10 V; see Figure 6 BUK6208-40C NXP Semiconductors N-channel TrenchMOS intermediate level FET [1] Continuous current is limited by package. 2. Pinning information Table 2. Pinning information Pin Symbol Description 1 G gate Simplified outline 2 D Drain 3 S source mb D mounting base; connected to drain Graphic symbol D mb G mbb076 S 2 1 3 SOT428 (DPAK) 3. Ordering information Table 3. Ordering information Type number BUK6208-40C BUK6208-40C Objective data sheet Package Name Description Version DPAK plastic single-ended surface-mounted package (DPAK); 3 leads (one lead cropped) SOT428 All information provided in this document is subject to legal disclaimers. Rev. 01 — 9 April 2010 © NXP B.V. 2010. All rights reserved. 2 of 11 BUK6208-40C NXP Semiconductors N-channel TrenchMOS intermediate level FET 4. Limiting values Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Conditions VDS drain-source voltage Tj ≥ 25 °C; Tj ≤ 175 °C gate-source voltage VGS drain current ID Min Typ Max Unit - - 40 V Pulsed [1] -20 - 20 V Tmb = 25 °C; VGS = 10 V [2] - - 50 A Tmb = 100 °C; VGS = 10 V [2] - - 50 A IDM peak drain current Tmb = 25 °C; tp ≤ 10 µs; pulsed - - 349 A Ptot total power dissipation Tmb = 25 °C; see Figure 1 - - 128 W Tstg storage temperature -55 - 175 °C Tj junction temperature -55 - 175 °C VGS gate-source voltage -16 - 16 V DC Source-drain diode [2] IS source current Tmb = 25 °C - - 50 A ISM peak source current tp ≤ 10 µs; pulsed; Tmb = 25 °C - - 349 A ID = 50 A; Vsup ≤ 40 V; RGS = 50 Ω; VGS = 10 V; Tj(init) = 25 °C; unclamped - - 210 mJ - - - J Avalanche ruggedness EDS(AL)S non-repetitive drain-source avalanche energy EDS(AL)R repetitive drain-source avalanche energy [3][4][5] [1] Accumulated pulse duration not to exceed 5mins. [2] Continuous current is limited by package. [3] Single-pulse avalanche rating limited by maximum junction temperature of 175 °C. [4] Repetitive avalanche rating limited by an average junction temperature of 170 °C. [5] Refer to application note AN10273 for further information. BUK6208-40C Objective data sheet All information provided in this document is subject to legal disclaimers. Rev. 01 — 9 April 2010 © NXP B.V. 2010. All rights reserved. 3 of 11 BUK6208-40C NXP Semiconductors N-channel TrenchMOS intermediate level FET 03na19 120 Pder (%) 80 40 0 0 50 100 150 200 Tmb (°C) Fig 1. Normalized total power dissipation as a function of mounting base temperature 5. Thermal characteristics Table 5. Thermal characteristics Symbol Parameter Conditions Min Typ Max Unit Rth(j-mb) thermal resistance from junction to mounting base see Figure 2 - - 1.17 K/W 003aae418 10 Zth(j-mb) (K/W) 1 δ = 0.5 0.2 0.1 10-1 0.05 δ= P 0.02 10-2 tp T single shot t tp T 10-3 10-6 Fig 2. 10-5 10-4 10-3 10-2 10-1 tp (s) 1 Transient thermal impedance from junction to mounting base as a function of pulse duration BUK6208-40C Objective data sheet All information provided in this document is subject to legal disclaimers. Rev. 01 — 9 April 2010 © NXP B.V. 2010. All rights reserved. 4 of 11 BUK6208-40C NXP Semiconductors N-channel TrenchMOS intermediate level FET 6. Characteristics Table 6. Characteristics Symbol Parameter Conditions Min Typ Max Unit Static characteristics V(BR)DSS drain-source breakdown voltage ID = 250 µA; VGS = 0 V; Tj = 25 °C 40 - - V ID = 250 µA; VGS = 0 V; Tj = -55 °C 36 - - V VGS(th) gate-source threshold voltage ID = 1 mA; VDS = VGS; Tj = 25 °C; see Figure 3; see Figure 4 1.8 2.3 2.8 V ID = 1 mA; VDS = VGS; Tj = -55 °C; see Figure 3 - - 3.3 V ID = 1 mA; VDS = VGS; Tj = 175 °C; see Figure 3 0.8 - - V - - 500 µA IDSS drain leakage current VDS = 40 V; VGS = 0 V; Tj = 175 °C VDS = 40 V; VGS = 0 V; Tj = 25 °C - 0.02 1 µA IGSS gate leakage current VDS = 0 V; VGS = 20 V; Tj = 25 °C - 2 100 nA VDS = 0 V; VGS = -20 V; Tj = 25 °C - 2 100 nA VGS = 10 V; ID = 25 A; Tj = 25 °C - 6.6 8 mΩ RDSon drain-source on-state resistance VGS = 5 V; ID = 15 A; Tj = 25 °C - - [tbd] mΩ VGS = 4.5 V; ID = 15 A; Tj = 25 °C - - [tbd] mΩ VGS = 10 V; ID = 25 A; Tj = 175 °C; see Figure 5 - - 16.8 mΩ ID = 25 A; VDS = 32 V; VGS = 10 V; see Figure 6 - - - nC ID = 25 A; VDS = 32 V; VGS = 5 V; see Figure 6 - - - nC ID = 25 A; VDS = 32 V; VGS = 10 V; see Figure 6 - - - nC - - - nC - 3000 [tbd] pF - 450 [tbd] pF - 330 [tbd] pF - - - ns Dynamic characteristics QG(tot) total gate charge QGS gate-source charge QGD gate-drain charge Ciss input capacitance Coss output capacitance Crss reverse transfer capacitance td(on) turn-on delay time VGS = 0 V; VDS = 25 V; f = 1 MHz; Tj = 25 °C VDS = 30 V; RL = 1.2 Ω; VGS = 10 V; RG(ext) = 10 Ω tr rise time - - - ns td(off) turn-off delay time - - - ns tf fall time - - - ns LD internal drain inductance from upper edge of drain mounting base to centre of die ; Tj = 25 °C - 3.5 - nH LS internal source inductance from source lead to source bond pad ; Tj = 25 °C - 7.5 - nH Source-drain diode VSD source-drain voltage IS = 25 A; VGS = 0 V; Tj = 25 °C - 0.85 1.2 V trr reverse recovery time - - - ns Qr recovered charge IS = 20 A; dIS/dt = -100 A/µs; VGS = 0 V; VDS = 25 V - - - nC BUK6208-40C Objective data sheet All information provided in this document is subject to legal disclaimers. Rev. 01 — 9 April 2010 © NXP B.V. 2010. All rights reserved. 5 of 11 BUK6208-40C NXP Semiconductors N-channel TrenchMOS intermediate level FET 003aad805 4 003aad806 10-1 ID (A) VGS(th) (V) 10-2 3 max min 2 typ 10-3 typ max min 10-4 1 0 -60 Fig 3. 10-5 10-6 0 60 120 Tj (°C) 0 180 Gate-source threshold voltage as a function of junction temperature Fig 4. 1 2 3 VGS (V) 4 Sub-threshold drain current as a function of gate-source voltage 003aad793 2.5 VDS a ID 2 VGS(pl) 1.5 VGS(th) VGS 1 QGS1 QGS2 QGS 0.5 QGD QG(tot) 003aaa508 0 -60 Fig 5. 0 60 120 Tj (°C) 180 Normalized drain-source on-state resistance factor as a function of junction temperature BUK6208-40C Objective data sheet Fig 6. Gate charge waveform definitions All information provided in this document is subject to legal disclaimers. Rev. 01 — 9 April 2010 © NXP B.V. 2010. All rights reserved. 6 of 11 BUK6208-40C NXP Semiconductors N-channel TrenchMOS intermediate level FET 7. Package outline Plastic single-ended surface-mounted package (DPAK); 3 leads (one lead cropped) SOT428 y E A A A1 b2 E1 mounting base D2 D1 HD 2 L L2 1 L1 3 b1 b w M c A e e1 0 5 10 mm scale DIMENSIONS (mm are the original dimensions) UNIT A A1 b b1 b2 c D1 D2 min E E1 min e e1 HD L L1 min L2 w y max mm 2.38 2.22 0.93 0.46 0.89 0.71 1.1 0.9 5.46 5.00 0.56 0.20 6.22 5.98 4.0 6.73 6.47 4.45 2.285 4.57 10.4 9.6 2.95 2.55 0.5 0.9 0.5 0.2 0.2 OUTLINE VERSION SOT428 Fig 7. REFERENCES IEC JEDEC JEITA TO-252 SC-63 EUROPEAN PROJECTION ISSUE DATE 06-02-14 06-03-16 Package outline SOT428 (DPAK) BUK6208-40C Objective data sheet All information provided in this document is subject to legal disclaimers. Rev. 01 — 9 April 2010 © NXP B.V. 2010. All rights reserved. 7 of 11 BUK6208-40C NXP Semiconductors N-channel TrenchMOS intermediate level FET 8. Revision history Table 7. Revision history Document ID Release date Data sheet status Change notice Supersedes BUK6208-40C_1 20100409 Objective data sheet - - BUK6208-40C Objective data sheet All information provided in this document is subject to legal disclaimers. Rev. 01 — 9 April 2010 © NXP B.V. 2010. All rights reserved. 8 of 11 BUK6208-40C NXP Semiconductors N-channel TrenchMOS intermediate level FET 9. Legal information 9.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term 'short data sheet' is explained in section "Definitions". [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. 9.2 Definitions Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification — The information and data provided in a Product data sheet shall define the specification of the product as agreed between NXP Semiconductors and its customer, unless NXP Semiconductors and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the NXP Semiconductors product is deemed to offer functions and qualities beyond those described in the Product data sheet. 9.3 Disclaimers Limited warranty and liability — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. In no event shall NXP Semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of NXP Semiconductors. Right to make changes — NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. BUK6208-40C Objective data sheet Suitability for use in automotive applications — This NXP Semiconductors product has been qualified for use in automotive applications. The product is not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications — Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. NXP Semiconductors does not accept any liability related to any default, damage, costs or problem which is based on a weakness or default in the customer application/use or the application/use of customer’s third party customer(s) (hereinafter both referred to as “Application”). It is customer’s sole responsibility to check whether the NXP Semiconductors product is suitable and fit for the Application planned. Customer has to do all necessary testing for the Application in order to avoid a default of the Application and the product. NXP Semiconductors does not accept any liability in this respect. Quick reference data — The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale — NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. NXP Semiconductors hereby expressly objects to applying the customer’s general terms and conditions with regard to the purchase of NXP Semiconductors products by customer. No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. All information provided in this document is subject to legal disclaimers. Rev. 01 — 9 April 2010 © NXP B.V. 2010. All rights reserved. 9 of 11 BUK6208-40C NXP Semiconductors N-channel TrenchMOS intermediate level FET Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities. 9.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. Adelante, Bitport, Bitsound, CoolFlux, CoReUse, DESFire, EZ-HV, FabKey, GreenChip, HiPerSmart, HITAG, I²C-bus logo, ICODE, I-CODE, ITEC, Labelution, MIFARE, MIFARE Plus, MIFARE Ultralight, MoReUse, Nexperia, QLPAK, Silicon Tuner, SiliconMAX, SmartXA, STARplug, TOPFET, TrenchMOS, TriMedia and UCODE — are trademarks of NXP B.V. HD Radio and HD Radio logo — are trademarks of iBiquity Digital Corporation. 10. Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] BUK6208-40C Objective data sheet All information provided in this document is subject to legal disclaimers. Rev. 01 — 9 April 2010 © NXP B.V. 2010. All rights reserved. 10 of 11 BUK6208-40C NXP Semiconductors N-channel TrenchMOS intermediate level FET 11. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 9.1 9.2 9.3 9.4 10 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . .1 General description . . . . . . . . . . . . . . . . . . . . . .1 Features and benefits . . . . . . . . . . . . . . . . . . . . .1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Quick reference data . . . . . . . . . . . . . . . . . . . . .1 Pinning information . . . . . . . . . . . . . . . . . . . . . . .2 Ordering information . . . . . . . . . . . . . . . . . . . . . .2 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . .3 Thermal characteristics . . . . . . . . . . . . . . . . . . .4 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . .7 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . .8 Legal information. . . . . . . . . . . . . . . . . . . . . . . . .9 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . .9 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Contact information. . . . . . . . . . . . . . . . . . . . . .10 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. © NXP B.V. 2010. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] Date of release: 9 April 2010 Document identifier: BUK6208-40C