MIL-C-24308 D-Subminiature 557-316 EMI/RFI Banding Backshell Assembly, RFI/EMI with Optional Qwik-Ty® for MIL-C-24308 Connectors 557 T 316 M 2 31 S T B H 6 Product Series Height of can (Omit for Standard, TableI): 6 = 1.5 inches 8 = 2.0 inches 10 = 2.5 inches Entry Location (See Note 2): T = Top (Tables II & III) S = Side (Table IV) E = End (Table IV) B = 45° (Tables II & III) Mounting Style A = Male Socket Head Screw w/Clip C = Male Fillister Head Screw w/Clip H = Through Hole (Omit for Standard #4-40 Thread) SL = Male Socket Head (Less Clip) X = Cross Recess Head Screw w/Clip M = Male Socket Head with E Clip Basic Number Finish (Table V) Shell Size (Table I) B = Band 600-052 K = Coiled Band 600-052-1 (Omit for None) Dash No. (Tables II, III & IV) Slot (Omit for None) Qwik-Ty® (Omit for None) K Qwik-Ty® Symbol T Strain Relief Arm L .400 (10.2) J Ref Slot Option J .065 (1.7) .020 (0.5) VIEW A-A Knurl or Flutes Mfr Option .050 (1.3) "T" Entry Band Symbol K "S" Entry "E" Entry (See Note 3) .420 (10.7) .320 (8.1) Knurl or Flutes Mfr Option F E H Optional Slot Location .265 (6.7) Max A C D B G (See Note 5) "B" Entry (See Note 5) Metric dimensions (mm) are indicated in parentheses © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-96 MIL-C-24308 D-Subminiature 557-316 EMI/RFI Banding Backshell Assembly, RFI/EMI with Optional Qwik-Ty® for MIL-C-24308 Connectors TABLE I: CONNECTOR INTERFACE AND BACKSHELL DIMENSIONS Shell Size 1 2 3 4 5 6 A Max 1.250 (31.8) 1.580 (40.1) 2.130 (54.1) 2.770 (70.4) 2.680 (68.1) 2.770 (70.4) B +.020 (0.5) .520 (13.2) .520 (13.2) .520 (13.2) .520 (13.2) .629 (16.0) .629 (16.0) C +.005 (0.1) .984 (25.0) 1.312 (33.3) 1.852 (47.0) 2.500 (63.5) 2.406 (61.1) 2.500 (63.5) D Ref .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .549 (13.9) .610 (15.5) E Max .695 (17.7) .695 (17.7) .695 (17.7) .695 (17.7) 1.135 (28.8) 1.265 (32.1) F Max 1.413 (35.9) 1.413 (35.9) 1.413 (35.9) 1.595 (40.5) 1.595 (40.5) 1.595 (40.5) G Max 1.035 (26.3) 1.035 (26.3) 1.035 (26.3) 1.035 (26.3) 1.125 (28.6) 1.185 (30.1) H Ref .856 (21.7) 1.186 (30.1) 1.727 (43.9) 2.838 (72.1) 2.287 (58.1) 2.405 (61.1) TABLE II: TOP/45° ENTRY LOCATION SHELL SIZES 1-4 ONLY TABLE III: TOP/45° ENTRY LOCATION SHELL SIZES 5 & 6 ONLY Shell J K L M Size Dia Dim Dim Dim 16 .188 (4.8) N/A .190 (4.8) .080 (2.0) 18 .205 (5.2) N/A .200 (5.1) .080 (2.0) 23 .250 (6.4) N/A .220 (5.6) .080 (2.0) 30 .312 (7.9) N/A .250 (6.4) .080 (2.0) 31 .375 (9.5) N/A .280 (7.1) .080 (2.0) 32* .438 (11.1) N/A .310 (7.9) .080 (2.0) 33* .562 (14.3) .723 (18.4) .380 (9.7) .080 (2.0) 34* .650 (16.5) .967 (24.6) .440 (11.2) .080 (2.0) 35* .562 (14.3) 1.250 (31.8) .450 (11.4) .080 (2.0) 00* N/A N/A N/A N/A * See Note 3 for Dash Numbers 32 & 33. See Notes 3 and 4 for Dash No. 00. See Notes 3 and 5 for Dash Nos. 35 & 35. Shell Size 16 23 30 31 32 33* 34* 35* 00* J Dia .188 (4.8) .250 (6.4) .312 (7.9) .375 (9.5) .438 (11.1) .562 (14.3) .650 (16.5) .562 (14.3) N/A K Dim N/A N/A N/A N/A N/A N/A .967 (24.6) 1.250 (31.8) N/A J Dia .188 (4.8) .250 (6.4) .312 (7.9) .375 (9.5) .438 (11.1) .562 (14.3) .650 (16.5) .650 (16.5) N/A K Dim N/A N/A N/A N/A N/A N/A N/A .967 (24.6) N/A L Dim .190 (4.8) .220 (5.6) .250 (6.4) .280 (7.1) .310 (7.9) .380 (9.7) .440 (11.2) .450 (11.4) N/A TABLE III: FINISH OPTIONS M Dim .080 (2.0) .080 (2.0) .080 (2.0) .080 (2.0) .080 (2.0) .080 (2.0) .080 (2.0) .080 (2.0) N/A * See Note 4 for Dash Number 00. NOTES: 1. Metric dimensions (mm) are indicated in parentheses. 2. For Multiple Entries select two letters to indicate choice, i.e.: SE = Side and End Entries. 3. For Die Cast Backshell, entry may be elliptical in shape. Consult factory for Entry Dimensions. 4. "00" indicates Shorting can Option. Available on T and E Configurations only. 5. For "B" Configuration, Dash Nos. 34 & 35 can height to be 1.8000 (45.7) © 2004 Glenair, Inc. M Dim .080 (2.0) .080 (2.0) .080 (2.0) .080 (2.0) .080 (2.0) .080 (2.0) .080 (2.0) .080 (2.0) N/A * See Note 3 for Dash Numbers 32 & 33. See Notes 3 and 5 for Dash Nos. 43 & 35. See Notes 3 and 4 for Dash No. 00. TABLE IV: SIDE/END ENTRY SHELL SIZES 5 & 6 ONLY Shell Size 16 23 30 31 32 33 34 36 00* L Dim .190 (4.8) .220 (5.6) .250 (6.4) .280 (7.1) .310 (7.9) .380 (9.7) .440 (11.2) .450 (11.4) N/A CAGE Code 06324 Symbol B C* G* J LF M N NC NF T U** ZN Finish Cadmium Plate/Olive Drab Black Anodize Anodic Hard Coat Gold Iridite over Cadmium Plate over Electroless Nickel Cadmium Plate/Bright over Electroless Nickel Electroless Nickel Cadmium Plate/Olive Drab over Electroless Nickel Zinc Cobalt/Dark Olive Drab Cadmium Plate/Olive Drab over Electroless Nickel Cadmium Plate/Bright over Electroless Nickel Cadmium Plate/Black Zinc-Nickel Alloy/Olive Drab *Anodize finish is not suitable for EMI shielding or grounding applications. **Applicable to corrosion resisting steel backshells and accessories. Consult factory for other available finishes. Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-97