MIL-C-24308 D-Subminiature 550-006 EMI/RFI D-Subminiature Split Backshell Crimp Ring Shield Termination 550 T 006 M 2 F0 B 1-02 Basic Part No. Cable Entry Dash No. (Table II) Cable Entry Style T = Top S = Side E = End 0 = Without EMI Gasket 1 = With EMI Gasket Basic Part Number Receptacle Mounting (Right Page) CC = Cable-to-Cable Mounting F0 = Front Mounting R1-R9 = Rear Mounting Jackscrew Type (Page A-4) Finish Symbol (Page 3) Shell Size (Table I) P 1.300 (33.3) Max 1.280 (32.5) Max S SIDE ENTRY T TOP ENTRY 1.300 (33.0) Max Crimp Ring (Supplied) EMI Gasket (Optional) M J Typ H Typ L N Color Code Bands © 2004 Glenair, Inc. K Typ E END ENTRY Shell I.D. Typ CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-20 MIL-C-24308 D-Subminiature 550-006 EMI/RFI D-Subminiature Split Backshell Crimp Ring Shield Termination TABLE I: SHELL SIZE & ENTRY STYLE Com’l Style Style Shell Shell T E Size Size Ref Shell I.D. Shell I.D. 1 E/09 .250 (6.4) .375 (9.5) 2 A/15 .375 (9.5) .375 (9.5) 3 B/25 .475 (12.1) .475 (12.1) 4 C/37 .475 (12.1) .475 (12.1) 5 D/50 .575 (14.6) .575 (14.6) 6* F/104 .625 (15.9) n/a * Shell Size 6 Available in Top Entry Only. P Max .940 (23.9) .940 (23.9) 1.060 (26.9) 1.060 (26.9) 1.190 (30.2) 1.594 (40.5) TABLE II: BACKSHELL DIMENSIONS & CABLE ENTRY Dash H Dia No. ±.005 (.1) 06 .090 (2.3) 10 .124 (3.1) 13 .149 (3.8) 16 .175 (4.4) 20 .219 (5.6) 23 .250 (6.4) 26 .275 (7.0) 29 .297 (7.5) 30 .312 (7.9) 31 .375 (9.5) 32 .430 (10.9) 33 .550 (14.0) J Dia ±.005 (.1) .113 (2.9) .145 (3.7) .179 (4.5) .215 (5.5) .250 (6.4) .281 (7.1) .305 (7.7) .335 (8.5) .365 (9.3) .406 (10.3) .500 (12.7) .620 (15.7) 1. 2. 3. 4. © 2004 Glenair, Inc. K Dim ±.015 (.4) .525 (13.3) .525 (13.3) .525 (13.3) .525 (13.3) .525 (13.3) .525 (13.3) .525 (13.3) .525 (13.3) .525 (13.3) .525 (13.3) .600 (15.2) .600 (15.2) L ±.005 .156 .187 .225 .261 .297 .327 .375 .405 .425 .500 .590 .710 Dia (.1) (4.0) (4.7) (5.7) (6.6) (7.5) (8.3) (9.5) (10.3) (10.8) (12.7) (15.0) (18.0) M ±.010 .194 .227 .256 .297 .335 .372 .406 .453 .473 .560 .670 .790 Dia (.3) (4.9) (5.8) (6.5) (7.5) (8.5) (9.4) (10.3) (11.5) (12.0) (14.2) (17.0) (20.1) N Dim ±.020 (.5) .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .440 (11.2) .440 (11.2) Color Code Yellow Green Tin Yellow Green Tin Yellow Red Tin Green Red Blue Metric dimensions (mm) are indicated in parentheses. DO NOT USE CONNECTORS WITH FLOAT MOUNTINGS. Overall shield thickness range: .020 (.5) to .050 (1.3). Crimp Ring Material: Tinned Copper per ASTMB188 CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-21