MIL-DTL-24308 D-Subminiature 557-018 EMI/RFI D-Subminiature Split Backshell Crimp Ring Shield Termination with Shrink Boot Groove 557 T 018 M 4 02 F0 B 1 T Basic Part No. Shrink Boot Supplied (Table II), Omit for None Cable Entry Style T = Top S = Side E = End 0 = Without EMI Gasket, 1 = With EMI Gasket Basic Part Number Receptacle Mounting (Right Page) CC = Cable-to-Cable Mounting F0 = Front Mounting R1-R9 = Rear Mounting Jackscrew Type (Page A-4) Finish Symbol (Page 3) Shell Size (Table I) .25 (6.4) Typ. Dash No. (Table II) .135 (3.4) Typ. 1.090 (27.7) Max Typ. S SIDE ENTRY T TOP ENTRY E Typ. J Typ. H Typ. E END ENTRY EMI Gasket (Optional) TABLE I: SHELL SIZE Shell Size 1 2 3 4 5 6 Com’l Shell Size Ref E/09 A/15 B/25 C/37 D/50 F/104 © 2011 Glenair, Inc. Max Entry Dash No. Table II 02 04 05 05 07 07 TABLE II: CABLE ENTRY & SHRINK BOOT Dash No. 01 02 03 04 05 06 07 H Dia .125 (3.2) .250 (6.4) .312 (7.9) .375 (9.5) .420 (10.7) .500 (12.7) .562 (14.3) J Dia .250 (6.4) .375 (9.5) .438 (11.1) .500 (12.7) .540 (13.7) .625 (15.9) .688 (17.5) CAGE Code 06324 Shrink Boot n/a 202K121-25-0 202K121-25-0 202K132-25-0 202K132-25-0 202K142-25-0 202K153-25-0 1. Metric dimensions (mm) are indicated in parentheses. 2.DO NOT USE CONNECTORS WITH FLOAT MOUNTINGS. 3.Crimp Ring Not Supplied. Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-52 MIL-DTL-24308 D-Subminiature D-Subminiature Split Backshells Standard Dimensions Jackscrew Types B, D, E, H, K (Page A-4) P Termination Type Jackscrew Types B, D, E, H, K (Page A-4) E R Jackscrew Types B , D, H and J Only (Page A-4) F T - TOP ENTRY E F S - SIDE ENTRY Shrink Sleeve (As Required) Termination Type E - END ENTRY A D C B G E .12 (3.0) Ref. A COMMON CONNECTOR/SHELL INTERFACE & BACKSHELL DIMENSIONS Com’l Shell Shell Size Ref Size E/09 1 A/15 2 B/25 3 C/37 4 D/50 5 F/104 6 A Max 1.393 (35.4) 1.706 (43.3) 2.265 (57.5) 2.900 (73.7) 2.800 (71.1) 2.900 (73.7) Panel Dash No. Thickness n/a CC n/a F0 R1 .031 (.8) R2 .047 (1.2) R3 .062 (1.6) R4 .093 (2.4) R5 .104 (2.6) R6 .125 (3.2) R7 .156 (4.0) R8 .135 (3.4) R9 .188 (4.8) B Max .624 (15.8) .624 (15.8) .624 (15.8) .624 (15.8) .750 (19.1) .844 (21.4) C Ref. .312 (7.9) .312 (7.9) .312 (7.9) .312 (7.9) .375 (9.5) .422 (10.7) D ±.005 (.1) .984 (25.0) 1.312 (33.3) 1.852 (47.0) 2.500 (63.5) 2.406 (61.1) 2.500 (63.5) P R Ref .730 (18.5) .719 (18.3) 1.050 (26.7) .719 (18.3) 1.594 (40.5) .938 (23.8) 2.240 (56.9) .938 (23.8) 2.140 (54.4) .938 (23.8) 2.240 (56.9) 1.094 (27.8) CABLE MOUNTING AND BACKSHELL DIMENSIONS E .174 (4.4) .343 (8.7) .247 (6.3) .231 (5.9) .216 (5.5) .185 (4.7) .174 (4.4) .153 (3.9) .125 (3.2) .140 (3.6) .094 (2.4) Sizes 1 & 2 1.451 (36.9) 1.625 (41.3) 1.525 (38.7) 1.509 (38.3) 1.500 (38.1) 1.470 (37.3) 1.451 (36.9) 1.430 (36.3) 1.400 (35.6) 1.417 (36.0) 1.368 (34.7) F + .031 (0.79) Sizes 3 - 5 1.671 (42.4) 1.844 (46.8) 1.745 (44.3) 1.728 (43.9) 1.720 (43.7) 1.690 (42.9) 1.671 (42.4) 1.650 (41.9) 1.620 (41.1) 1.637 (41.6) 1.590 (40.4) Size 6 1.820 (46.2) 2.000 (50.8) 1.890 (48.0) 1.875 (47.6) 1.860 (47.2) 1.829 (46.5) 1.820 (46.2) 1.798 (45.7) 1.767 (44.9) 1.805 (45.8) 1.740 (44.2) G + .031 (0.79) Sizes 1 & 2 Sizes 3 - 5 1.583 (40.2) 1.831 (46.5) 1.750 (44.5) 2.000 (50.8) 1.656 (42.1) 1.904 (48.4) 1.640 (41.7) 1.888 (48.0) 1.625 (41.3) 1.873 (47.6) 1.594 (40.5) 1.842 (46.8) 1.583 (40.2) 1.831 (46.5) 1.563 (39.7) 1.811 (46.0) 1.531 (38.9) 1.781 (45.2) 1.550 (39.4) 1.798 (45.7) 1.500 (38.1) 1.750 (44.5) Metric dimensions (mm) are indicated in parentheses. © 2011 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-53