MIL-DTL-83513 Micro-D 507-171 EMI/RFI Micro-D 45° Banding Backshell Assembly with Eliptical Banding Porch Retaining Clip B E H Thread Typ .175 (4.4) .440 (11.2) A F D Connector Shown for Reference Only Jackscrew C G Male Hex Head HOW TO ORDER SeriesBasic Part Number Finish Symbol (Table II) 507-171 Shell Size (Table I) 09 15 21 25 31 37 51 100 Banding Jackpost/ Jackscrew* B – Band Supplied B – 2 Male Fillister Heads (600-052) H – 2 Male Hex Sockets Omit for No Band Supplied F – 2 Female Jackposts FB – 1 Female Jackpost, and 1 Male Fillister head FH – 1 Female Jackpost, and 1 Male Hex Socket W-2 – Male External Hex Head Sample Part Number: 507-171 M 21 –– B H * SEE PAGE C-4 FOR COMPLETE INFORMATION NOTES: 1. Metric dimensions (mm) are indicated in parentheses. 2. Jackscrew & Jackpost to float, allowing Connector to engage prior to Jackscrew. 3. Use Glenair 600-057 Band and 600-061 Tool. © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] C-36 MIL-DTL-83513 Micro-D 507-171 EMI/RFI Micro-D 45° Banding Backshell Assembly with Eliptical Banding Porch TABLE I: SHELL SIZE, CABLE ENTRY, BACKSHELL & CONNECTOR INTERFACE DIMENSIONS Shell Size 09 15 21 25 31 37 51 100 A Dim .775 (19.7) .925 (23.5) 1.075 (27.3) 1.175 (29.4) 1.325 (33.7) 1.475 (37.5) 1.425 (36.2) 2.160 (54.9) B Dim .340 (8.6) .340 (8.6) .340 (8.6) .340 (8.6) .340 (8.6) .340 (8.6) .380 (9.7) .430 (10.9) C Dia .320 (8.1) .384 (9.8) .448 (11.4) .508 (12.9) .542 (13.8) .572 (14.2) .638 (16.2) .766 (19.5) D Dia .156 (4.0) .188 (4.8) .219 (5.6) .250 (6.4) .265 (6.7) .281 (7.1) .312 (7.9) .375 (9.5) E Dim .840 (21.3) .890 (22.6) .930 (23.6) .980 (24.9) 1.000 (25.4) 1.020 (25.9) 1.070 (27.2) 1.160 (29.5) F Dim .565 (14.5) .715 (18.2) .865 (22.0) .965 (24.5) 1.115 (28.3) 1.265 (32.1) 1.215 (30.9) 1.800 (45.7) G .154 .154 .154 .154 .154 .154 .154 .194 (3.9) (3.9) (3.9) (3.9) (3.9) (3.9) (3.9) (4.9) H Thread 2-56 UNC-2A 2-56 UNC-2A 2-56 UNC-2A 2-56 UNC-2A 2-56 UNC-2A 2-56 UNC-2A 2-56 UNC-2A 4-40 UNC-2A TABLE III: FINISH OPTIONS Symbol B C* G* J LF M N NC NF T U** ZN Finish Cadmium Plate/Olive Drab Black Anodize Anodic Hard Coat Gold Iridite over Cadmium Plate over Electroless Nickel Cadmium Plate/Bright over Electroless Nickel Electroless Nickel Cadmium Plate/Olive Drab over Electroless Nickel Zinc Cobalt/Dark Olive Drab Cadmium Plate/Olive Drab over Electroless Nickel Cadmium Plate/Bright over Electroless Nickel Cadmium Plate/Black Zinc-Nickel Alloy/Olive Drab *Anodize finish is not suitable for EMI shielding or grounding applications. **Applicable to corrosion resisting steel backshells and accessories. Consult factory for other available finishes. Metric dimensions (mm) are indicated in parentheses © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] C-37