Part Numbering Safety Standard Certified Ceramic Capacitors (Part Number) DE 2 E3 KH 102 M N3 A - 2 ' . 0 ( + / 4 4Capacitance Tolerance -Product ID Code Product ID Safety Standard Certified Ceramic Capacitors/ High Voltage Ceramic Capacitors DE 2Series Category Code 1 2 J Outline Contents Safety Standard Certified IEC60384-14 Class X1, Y1 AC250V (r.m.s.) J +5% K +10% M +20% Z .80%, 020% 0Lead Style IEC60384-14 Class X1, Y2 -Products based on the Electrical Appliance and Material Safety Law of Japan- For Electrical Appliance and Material Safety Law of Japan, the first three digits (-Product ID and 2Series Category) express "Series Name." For Safety Certified Capacitors, the first three digits express product code. The fourth figure expresses certified type shown in .Safety Standard Certified Type column. Lead Style Code 'Temperature Characteristics Vertical Crimp Long A3 A4 Cap. Change or Temp. Coeff. B3 B +10% E3 E .20%,055% F3 F 1X SL Temperature Range .30%,080% .350 to 01000ppm/% .20 to .85% 10 5 Code ø0.6+0.05 Pitch of Components 7.5 10 ø0.6.0.1, 00.05 C3 Straight Long 7.5 ø0.6+0.05 D3 Straight Short 7.5 ø0.6+0.05 ø0.6+0.05 10 5 N3 Vertical Crimp Taping N4 N5 Straight Taping P3 7.5 0 ø0.6.0.1,00.05 Vertical Crimp Short B3 N7 .Rated Voltage/Safety Standard Certified Type Lead Diameter 10 B2 N2 025 to .85% 7.5 A5 B5 Temperature Characteristics Dimensions (mm) Lead Spacing 5 A2 B4 Code Capacitance Tolerance 0 0 0 12.7 ø0.6+0.05 10 15 25.4 10 ø0.6.0.1, 00.05 25.4 7.5 ø0.6+0.05 30 7.5 ø0.6+0.05 15 Rated Voltage (Packaging E2 AC250V KH X1, Y2; AC250V, (Safety Standard Certified Type KH) Code Packaging KY X1, Y2; AC250V, (Safety Standard Certified Type KY) A Ammo Pack Taping KX X1, Y1; AC250V, (Safety Standard Certified Type KX) B Bulk /Capacitance +Individual Specification Code Expressed by three figures. The unit is pico-farad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two numbers. For part number that cannot be identified without "Individual Specification," it is added at the end of part number, expressed by three-digit alphanumerics.