MURATA GR40272C0GR50WA01D

!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Monolithic
Ceramic Capacitors
Cat.No.C02E-15
C02E.pdf
09.9.18
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CONTENTS
Part Numbering
2
Selection Guide
7
1
for General Purpose GRM Series
8
1 Specifications and Test Methods
51
GRM Series Data
2
Capacitor Array GNM Series
2 Specifications and Test Methods
3
Low ESL LLL/LLA/LLM Series
3 Specifications and Test Methods
4
High-Q Type GJM Series
4 Specifications and Test Methods
5
High Frequency GQM Series
5 Specifications and Test Methods
GQM Series Data
6
8
63
68
74
81
85
95
98
105
108
High Frequency Type ERB Series
109
6 Specifications and Test Methods
116
ERB Series Data
7
60
119
Monolithic Microchip GMA Series
121
7 Specifications and Test Methods
123
for Bonding GMD Series
8 Specifications and Test Methods
127
132
Package
136
!Caution
140
Notice
152
Reference Data
159
9
Medium Voltage Low Dissipation Factor
166
10
Medium Voltage High Capacitance for General Use
171
11
Only for LCD Backlight Inverter Circuit
176
12
Only for Information Devices
179
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
2
13
Only for Camera Flash Circuit
183
14
AC250V (r.m.s.) Type (Which Meet Japanese Law)
187
15
Safety Standard Recognized Type GC (UL, IEC60384-14 Class X1/Y2)
191
16
Safety Standard Recognized Type GD (IEC60384-14 Class Y3)
192
17
Safety Standard Recognized Type GF (IEC60384-14 Class Y2, X1/Y2)
193
18
Safety Standard Recognized Type GB (IEC60384-14 Class X2)
195
GA3 Series Specifications and Test Methods
196
GRM/GR4/GR7/GA2/GA3 Series Data (Typical Example)
200
Package
203
!Caution
206
Notice
214
ISO 9001 Certifications
217
3
4
5
6
7
8
9
10
Please refer to "Specifications and Test Methods" at the end of each chapter of
9
–
14
.
11
12
13
14
15
16
17
for EU RoHS Compliant
•
•
•
All the products in this catalog comply with EU RoHS.
EU RoHS is "the European Directive 2002/95/EC on the Restriction of the Use
of Certain Hazardous Substances in Electrical and Electronic Equipment".
For more details, please refer to our website 'Murata's Approach for EU RoHS'
(http://www.murata.com/info/rohs.html).
Please check MURATA home page (http://www.murata.com/index.html) in case you can not find the part number on the catalog.
18
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
o Part Numbering
Chip Monolithic Ceramic Capacitors
(Part Number)
GR
M
18
8
q
w
e
r t
B1 1H
y
102
K
u
i
A01 D
o
!0
rDimension (T)
qProduct ID
wSeries
Code
Dimension (T)
Code
Series
2
0.2mm
M
Tin Plated Layer
2
2-elements (Array Type)
GR
4
Only for Information Devices / Tip & Ring
3
0.3mm
7
Only for Camera Flash Circuit
4
4-elements (Array Type)
ER
B
High Frequency Type
5
0.5mm
M
High Frequency for
Flow/Reflow Soldering
6
0.6mm
7
0.7mm
A
Monolithic Microchip
8
0.8mm
D
for Bonding
9
0.85mm
M
Capacitor Array
A
1.0mm
L
Low ESL Wide Width Type
B
1.25mm
Product ID
GQ
GM
GN
LL
GJ
GA
A
Eight-termination Low ESL Type
C
1.6mm
M
Ten-termination Low ESL Type
D
2.0mm
M
High Frequency Low Loss Type
E
2.5mm
2
for AC250V (r.m.s.)
F
3.2mm
3
Safety Standard Recognized Type
M
1.15mm
eDimension (LgW)
N
1.35mm
Q
1.5mm
R
1.8mm
Code
Dimension (LgW)
EIA
S
2.8mm
02
0.4g0.2mm
01005
X
Depends on individual standards.
03
0.6g0.3mm
0201
05
0.5g0.5mm
0202
08
0.8g0.8mm
0303
0D
0.38g0.38mm
015015
0M
0.9g0.6mm
0302
11
1.25g1.0mm
0504
15
1.0g0.5mm
0402
18
1.6g0.8mm
0603
1M
1.37g1.0mm
0504
21
2.0g1.25mm
0805
22
2.8g2.8mm
1111
31
3.2g1.6mm
1206
32
3.2g2.5mm
1210
42
4.5g2.0mm
1808
43
4.5g3.2mm
1812
52
5.7g2.8mm
2211
55
5.7g5.0mm
2220
With the array type GNM series, "Dimension(T)" indicates the number of
elements.
Continued on the following page.
Please check MURATA home page (http://www.murata.com/index.html) in case you can not find the part number on the catalog.
2
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
tTemperature Characteristics
Temperature Characteristic Codes
Code
Public STD Code
Temperature Characteristics
Reference
Temperature
Temperature
Range
Capacitance Change or
Temperature Coefficient
Operating
Temperature Range
1X
SL *1
JIS
20°C
20 to 85°C
+350 to -1000ppm/°C
-55 to 125°C
2C
CH *1
JIS
20°C
20 to 125°C
0±60ppm/°C
-55 to 125°C
2P
PH *1
JIS
20°C
20 to 85°C
-150±60ppm/°C
-25 to 85°C
2R
RH *1
JIS
20°C
20 to 85°C
-220±60ppm/°C
-25 to 85°C
2S
SH *1
JIS
20°C
20 to 85°C
-330±60ppm/°C
-25 to 85°C
2T
TH *1
JIS
20°C
20 to 85°C
-470±60ppm/°C
-25 to 85°C
3C
CJ *1
JIS
20°C
20 to 125°C
0±120ppm/°C
-55 to 125°C
3P
PJ *1
JIS
20°C
20 to 85°C
-150±120ppm/°C
-25 to 85°C
3R
RJ *1
JIS
20°C
20 to 85°C
-220±120ppm/°C
-25 to 85°C
3S
SJ *1
JIS
20°C
20 to 85°C
-330±120ppm/°C
-25 to 85°C
3T
TJ *1
JIS
20°C
20 to 85°C
-470±120ppm/°C
-25 to 85°C
3U
UJ *1
JIS
20°C
20 to 85°C
-750±120ppm/°C
-25 to 85°C
4C
CK *1
JIS
20°C
20 to 125°C
0±250ppm/°C
-55 to 125°C
5C
C0G *1
EIA
25°C
25 to 125°C
0±30ppm/°C
-55 to 125°C
5G
X8G *1
EIA
25°C
25 to 150°C
0±30ppm/°C
-55 to 150°C
6C
C0H *1
EIA
25°C
25 to 125°C
0±60ppm/°C
-55 to 125°C
6P
P2H *1
EIA
25°C
25 to 85°C
-150±60ppm/°C
-55 to 125°C
6R
R2H *1
EIA
25°C
25 to 85°C
-220±60ppm/°C
-55 to 125°C
6S
S2H *1
EIA
25°C
25 to 85°C
-330±60ppm/°C
-55 to 125°C
6T
T2H *1
EIA
25°C
25 to 85°C
-470±60ppm/°C
-55 to 125°C
7U
U2J *1
EIA
25°C
25 to 125°C *6
-750±120ppm/°C
-55 to 125°C
B1
B *2
JIS
20°C
-25 to 85°C
±10%
-25 to 85°C
B3
B
JIS
20°C
-25 to 85°C
±10%
-25 to 85°C
C7
X7S
EIA
25°C
-55 to 125°C
±22%
-55 to 125°C
C8
X6S
EIA
25°C
-55 to 105°C
±22%
-55 to 105°C
D7
X7T
EIA
25°C
-55 to 125°C
+22, -33%
-55 to 125°C
D8
X6T
EIA
25°C
-55 to 105°C
+22, -33%
-55 to 105°C
E7
X7U
EIA
25°C
-55 to 125°C
+22, -56%
-55 to 125°C
-25 to 85°C
F1
F *2
JIS
20°C
-25 to 85°C
+30, -80%
F5
Y5V
EIA
25°C
-30 to 85°C
+22, -82%
-30 to 85°C
L8
X8L
*3
25°C
-55 to 150°C
+15, -40%
-55 to 150°C
R1
R *2
JIS
20°C
-55 to 125°C
±15%
-55 to 125°C
-55 to 125°C
R3
R
JIS
20°C
-55 to 125°C
±15%
R6
X5R
EIA
25°C
-55 to 85°C
±15%
-55 to 85°C
R7
X7R
EIA
25°C
-55 to 125°C
±15%
-55 to 125°C
R9
X8R
EIA
25°C
-55 to 150°C
±15%
-55 to 150°C
W0
-
-
25°C
-55 to 125°C
±10% *4
-55 to 125°C
+22, -33% *5
*1 Please refer to table for Capacitance Change under reference temperature.
*2 Capacitance change is specified with 50% rated voltage applied.
*3 Murata Temperature Characteristic Code.
*4 Apply DC350V bias.
*5 No DC bias.
*6 Rated Voltage 100Vdc max : 25 to 85°C
Continued on the following page.
Please check MURATA home page (http://www.murata.com/index.html) in case you can not find the part number on the catalog.
3
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
oCapacitance Change from each temperature
JIS Code
Capacitance Change from 20°C (%)
Murata Code
–55°C
–25°C
–10°C
Max.
Min.
Max.
Min.
Max.
1X
–
–
–
–
–
Min.
–
2C
0.82
–0.45
0.49
–0.27
0.33
–0.18
2P
–
–
1.32
0.41
0.88
0.27
2R
–
–
1.70
0.72
1.13
0.48
2S
–
–
2.30
1.22
1.54
0.81
2T
–
–
3.07
1.85
2.05
1.23
3C
1.37
–0.90
0.82
–0.54
0.55
–0.36
3P
–
–
1.65
0.14
1.10
0.09
3R
–
–
2.03
0.45
1.35
0.30
3S
–
–
2.63
0.95
1.76
0.63
3T
–
–
3.40
1.58
2.27
1.05
3U
–
–
4.94
2.84
3.29
1.89
4C
2.56
–1.88
1.54
–1.13
1.02
–0.75
EIA Code
Capacitance Change from 25°C (%)
Murata Code
–55°C
–30°C
–10°C
Max.
Min.
Max.
Min.
Max.
Min.
5C/5G
0.58
–0.24
0.40
–0.17
0.25
–0.11
6C
0.87
–0.48
0.59
–0.33
0.38
–0.21
6P
2.33
0.72
1.61
0.50
1.02
0.32
6R
3.02
1.28
2.08
0.88
1.32
0.56
6S
4.09
2.16
2.81
1.49
1.79
0.95
6T
5.46
3.28
3.75
2.26
2.39
1.44
7U
8.78
5.04
6.04
3.47
3.84
2.21
Continued on the following page.
Please check MURATA home page (http://www.murata.com/index.html) in case you can not find the part number on the catalog.
4
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
yRated Voltage
uCapacitance
0J
DC6.3V
Expressed by three-digit alphanumerics. The unit is pico-farad
(pF). The first and second figures are significant digits, and the
third figure expresses the number of zeros which follow the two
numbers.If there is a decimal point, it is expressed by the capital
letter "R". In this case, all figures are significant digits.
1A
DC10V
Ex.)
Code
Capacitance
1C
DC16V
R50
0.5pF
1E
DC25V
1R0
1.0pF
YA
DC35V
100
10pF
1H
DC50V
103
10000pF
2A
DC100V
2D
DC200V
2E
DC250V
YD
DC300V
2H
DC500V
2J
DC630V
3A
DC1kV
Code
Rated Voltage
0E
DC2.5V
0G
DC4V
3D
DC2kV
3F
DC3.15kV
BB
DC350V (for Camera Flash Circuit)
E2
AC250V
GB
X2; AC250V (Safety Standard Recognized Type GB)
GC
X1/Y2; AC250V (Safety Standard Recognized Type GC)
GD
Y3; AC250V (Safety Standard Recognized Type GD)
GF
Y2, X1/Y2; AC250V (Safety Standard Recognized Type GF)
Continued on the following page.
Please check MURATA home page (http://www.murata.com/index.html) in case you can not find the part number on the catalog.
5
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
iCapacitance Tolerance
Capacitance Step
Code
Capacitance Tolerance
TC
Series
W
±0.05pF
C∆
GRM/GJM
V9.9pF
0.1pF
GRM/GJM
V9.9pF
0.1pF
V1pF
0.1pF
±0.1pF
B
C∆
GQM
ERB
V9.9pF
1pF Step and E24 Series
C∆
GRM/GJM
V9.9pF
0.1pF
except C∆
GRM
V5pF
* 1pF
ERB
V9.9pF
1pF Step and E24 Series
V1pF
0.1pF
±0.25pF
C
C∆
±0.5pF
D
GRM/GJM
5.1 to 9.9pF
0.1pF
GRM
5.1 to 9.9pF
* 1pF
C∆
ERB/GQM
C∆
GJM
U10pF
E12 Series
C∆
GQM/ERB
U10pF
E24 Series
GRM/GA3
U10pF
E12 Series
C∆
ERB/GQM/GJM
U10pF
E24 Series
B, R, X7R, X5R, ZLM
GRM/GR7/GA3
C0G
GNM
E6 Series
B, R, X7R, X5R, ZLM
GR4, GMD
E12 Series
B, R, X7R, X7S
GRM/GMA
E6 Series
X5R, X7R, X7S
GNM
E3 Series
E3 Series
±20%
M
5.1 to 9.9pF 1pF Step and E24 Series
C∆–SL
±10%
K
Z
C∆
±5%
J
1.1 to 9.9pF 1pF Step and E24 Series
except C∆
±2%
G
GQM
1.1 to 9.9pF 1pF Step and E24 Series
E6 Series
X7R
GA2
X5R, X7R, X7S, X6S
LLL/LLA/LLM
E3 Series
F, Y5V
GRM
E3 Series
+80%, -20%
R
Depends on individual standards.
* E24 series is also available.
oIndividual Specification Code
Expressed by three figures.
!0Packaging
Code
Packaging
L
ø180mm Embossed Taping
D
ø180mm Paper Taping
E
ø180mm Paper Taping (LLL15)
K
ø330mm Embossed Taping
J
ø330mm Paper Taping
F
ø330mm Paper Taping (LLL15)
B
Bulk
C
Bulk Case
T
Bulk Tray
Please check MURATA home page (http://www.murata.com/index.html) in case you can not find the part number on the catalog.
6
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Selection Guide of Chip Monolithic Ceramic Capacitors
Function
Type
High Capacitance
Series
GRM (X5R, X7R, Y5V etc.)
68pF–100µF
Decoupling, Smoothing
Array (2 or 4 Elements)
GNM
10pF–2.2µF
GRM (C0G)
Frequency Control/Tuning,
Impedance Matching
0.1pF–0.1µF
Class1 TC's;
GRM (U2J etc.)
Low Inductance
(Reverse Geometry)
LLL
2200pF–10µF
High Speed Decoupling
Low Inductance
(Multi Termination)
Low ESR (50V to 500V)
High Frequency
Low ESR, Ultra Small
Lowest ESR
Start
LLA/LLM (From 1GHz)
0.01µF–4.7µF
ERB (1MHz to 1GHz)
0.5pF–1000pF
GJM (500MHz to 10GHz)
0.1pF–33pF
GQM (500MHz to 10GHz)
0.1pF–100pF
GMA 100pF–0.47µF
GMD 100pF–1µF
Optical Communications
Wire-Die-Bonding
Medium Voltage
High Frequency Snubber
250V/630V/1kV/2kV/3.15kV
Low Dissipation
Medium Voltage
LCD Backlight Inverter
3.15kV
Low Dissipation
GRM (C0G)
Medium Voltage
Decoupling, Smoothing
250V/630V/1kV
High Capacitance
GRM (X7R)
Medium Voltage
Only for Camera Flash Circuit
350V
High Capacitance
10000pF–47000pF
2kV
High Capacitance
100pF–10000pF
Safety Standard
Recognized
Type GD 10pF–4700pF
Type GF 10pF–4700pF
Safety Standard
Recognized
Type GC 100pF–330pF
Type GF 470pF–4700pF
Type GB 10000pF–33000pF
AC250V which meet
Japanese Law
470pF–0.1µF
Medium Voltage
Only for
Information Devices
/ Tip & Ring
AC Lines Noise Removal
Automotive
(Power-train,
Safety Equipment)
Medium Voltage for Automotive
(Power-train, Safety Equipment)
High Capacitance
Class1 TC's;
250V/630V
Low Dissipation
GRM (U2J)
10pF–10000pF
5pF–47pF
220pF–1µF
GR7
GR4
GA2
GCM (X7R etc.)
100pF–47µF
GCM (C0G etc.)
1.0pF–0.1µF
GCM (U2J)
10pF–10000pF
7
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Monolithic Ceramic Capacitors
1
for General Purpose GRM Series
1. Higher resistance of solder-leaching due to
the Ni-barriered termination, applicable for
reflow-soldering, and flow-soldering
(GRM18/21/31 type only).
2. The GRM series is lead free product.
3. Smaller size and higher capacitance value.
4. High reliability and no polarity.
5. Excellent pulse responsibility and noise reduction
due to the low impedance at high frequency.
6. The GRM series is available in paper or embossed
tape and reel packaging for automatic placement.
Bulk case packaging is also available for GRM15/
18/21(T=0.6,1.25).
7. Ta replacement.
■ Applications
General electronic equipment
8
Part Number
GRM022
GRM033
GRM15X
GRM153
GRM155
GRM185
GRM188*
GRM216
GRM219
GRM21A
GRM21B
GRM316
GRM319
GRM31M
GRM31C
GRM329
GRM32A
GRM32M
GRM32N
GRM32C
GRM32R
GRM32D
GRM32E
L
Dimensions (mm)
W
T
e
0.4 ±0.02 0.2 ±0.02 0.2 ±0.02 0.07 to 0.14
0.6 ±0.03 0.3 ±0.03 0.3 ±0.03 0.1 to 0.2
0.25 ±0.05
0.1 to 0.3
1.0 ±0.05 0.5 ±0.05 0.3 ±0.03
0.5 ±0.05 0.15 to 0.35
0.5 +0/-0.1
0.2 to 0.5
1.6 ±0.1 0.8 ±0.1
0.8 ±0.1
0.6 ±0.1
0.85 ±0.1
0.2 to 0.7
2.0 ±0.1 1.25 ±0.1
1.0 +0/-0.2
1.25 ±0.1
0.6 ±0.1
3.2 ±0.15 1.6 ±0.15 0.85 ±0.1
0.3 to 0.8
1.15 ±0.1
3.2 ±0.2 1.6 ±0.2 1.6 ±0.2
0.85 +0.15/-0.05
1.0 +0/-0.2
1.15 ±0.1
1.35 ±0.15
0.3 min.
3.2 ±0.3 2.5 ±0.2
1.6 ±0.2
1.8 ±0.2
2.0 ±0.2
2.5 ±0.2
g min.
0.13
0.2
0.4
0.3
0.5
0.7
1.5
e
g
e
1.0
* Bulk Case: 1.6 ±0.07(L)g0.8 ±0.07(W)g0.8 ±0.07(T)
* The figure indicates typical Specification.
T
■ Features
L
W
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
1
Temperature Compensating Type C0G(5C),U2J(7U) Characteristics
6
ex.6: T Dimension [mm]
TC
0.4x0.2
(02)
<01005>
LxW
[mm]
C0G(5C)
0.6x0.3 1.0x0.5 1.6x0.8
(03) (15)
(18)
<0201> <0402> <0603>
2.0x1.25
(21)
<0805>
3.2x1.6
(31)
<1206>
0.6x0.3
(03)
<0201>
U2J(7U)
1.0x0.5 1.6x0.8
(15)
(18)
<0402> <0603>
2.0x1.25 3.2x1.6
(21)
(31)
<0805> <1206>
Rated Voltage 16 10 6.3 50 50 100 50 100 50 100 50 50 25 50 10 50 10 50 10 50
[Vdc] (1C) (1A) (0J) (1H) (1H) (1E) (1H) (1E) (1H) (1E) (1H) (1H) (1E) (1H) (1A) (1H) (1A) (1H) (1A) (1H)
Capacitance
0.1pF(R10)
3
3, 5
0.2pF(R20)
2
3
3, 5
0.3pF(R30)
2
3
3, 5
0.4pF(R40)
2
3
3, 5
0.5pF(R50)
2
3
3, 5
0.6pF(R60)
2
3
3, 5
0.7pF(R70)
2
3
3, 5
0.8pF(R80)
2
3
3, 5
0.9pF(R90)
2
3
3, 5
1.0pF(1R0)
2
3
3, 5
1.1pF(1R1)
2
3
3, 5
1.2pF(1R2)
2
3
3, 5
1.3pF(1R3)
2
3
3, 5
1.4pF(1R4)
2
3
3, 5
1.5pF(1R5)
2
3
3, 5
1.6pF(1R6)
2
3
3, 5
1.7pF(1R7)
2
3
3, 5
1.8pF(1R8)
2
3
3, 5
1.9pF(1R9)
2
3
3, 5
2.0pF(2R0)
2
3
3, 5
2.1pF(2R1)
2
3
3, 5
2.2pF(2R2)
2
3
3, 5
2.3pF(2R3)
2
3
3, 5
2.4pF(2R4)
2
3
3, 5
2.5pF(2R5)
2
3
3, 5
2.6pF(2R6)
2
3
3, 5
2.7pF(2R7)
2
3
3, 5
2.8pF(2R8)
2
3
3, 5
2.9pF(2R9)
2
3
3, 5
3.0pF(3R0)
2
3
3, 5
3.1pF(3R1)
2
3
3, 5
3.2pF(3R2)
2
3
3, 5
3.3pF(3R3)
2
3
3, 5
3.4pF(3R4)
2
3
3, 5
3.5pF(3R5)
2
3
3, 5
3.6pF(3R6)
2
3
3, 5
3.7pF(3R7)
2
3
3, 5
3.8pF(3R8)
2
3
3, 5
3.9pF(3R9)
2
3
3, 5
4.0pF(4R0)
2
3
3, 5
4.1pF(4R1)
2
3
3, 5
4.2pF(4R2)
2
3
3, 5
4.3pF(4R3)
2
3
3, 5
4.4pF(4R4)
2
3
3, 5
4.5pF(4R5)
2
3
3, 5
4.6pF(4R6)
2
3
3, 5
4.7pF(4R7)
2
3
3, 5
4.8pF(4R8)
2
3
3, 5
4.9pF(4R9)
2
3
3, 5
The part number code is shown in ( ) and Unit is shown in [ ].
3
5
3
5
3
5
3
5
< >: EIA [inch] Code
Continued on the following page.
9
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
Capacitance Table
Continued from the preceding page.
6
ex.6: T Dimension [mm]
TC
0.4x0.2
(02)
<01005>
LxW
[mm]
C0G(5C)
0.6x0.3 1.0x0.5 1.6x0.8
(03) (15)
(18)
<0201> <0402> <0603>
2.0x1.25
(21)
<0805>
3.2x1.6
(31)
<1206>
0.6x0.3
(03)
<0201>
U2J(7U)
1.0x0.5 1.6x0.8
(15)
(18)
<0402> <0603>
2.0x1.25 3.2x1.6
(21)
(31)
<0805> <1206>
Rated Voltage 16 10 6.3 50 50 100 50 100 50 100 50 50 25 50 10 50 10 50 10 50
[Vdc] (1C) (1A) (0J) (1H) (1H) (1E) (1H) (1E) (1H) (1E) (1H) (1H) (1E) (1H) (1A) (1H) (1A) (1H) (1A) (1H)
Capacitance
5.0pF(5R0)
2
3
3, 5
5.1pF(5R1)
2
3
3, 5
5.2pF(5R2)
2
3
3, 5
5.3pF(5R3)
2
3
3, 5
5.4pF(5R4)
2
3
3, 5
5.5pF(5R5)
2
3
3, 5
5.6pF(5R6)
2
3
3, 5
5.7pF(5R7)
2
3
3, 5
5.8pF(5R8)
2
3
3, 5
5.9pF(5R9)
2
3
3, 5
6.0pF(6R0)
2
3
3, 5
6.1pF(6R1)
2
3
3, 5
6.2pF(6R2)
2
3
3, 5
6.3pF(6R3)
2
3
3, 5
6.4pF(6R4)
2
3
3, 5
6.5pF(6R5)
2
3
3, 5
6.6pF(6R6)
2
3
3, 5
6.7pF(6R7)
2
3
3, 5
6.8pF(6R8)
2
3
3, 5
6.9pF(6R9)
2
3
3, 5
7.0pF(7R0)
2
3
3, 5
7.1pF(7R1)
2
3
3, 5
7.2pF(7R2)
2
3
3, 5
7.3pF(7R3)
2
3
3, 5
7.4pF(7R4)
2
3
3, 5
7.5pF(7R5)
2
3
3, 5
7.6pF(7R6)
2
3
3, 5
7.7pF(7R7)
2
3
3, 5
7.8pF(7R8)
2
3
3, 5
7.9pF(7R9)
2
3
3, 5
8.0pF(8R0)
2
3
3, 5
8.1pF(8R1)
2
3
3, 5
8.2pF(8R2)
2
3
3, 5
8.3pF(8R3)
2
3
3, 5
8.4pF(8R4)
2
3
3, 5
8.5pF(8R5)
2
3
3, 5
8.6pF(8R6)
2
3
3, 5
8.7pF(8R7)
2
3
3, 5
8.8pF(8R8)
2
3
3, 5
8.9pF(8R9)
2
3
3, 5
9.0pF(9R0)
2
3
3, 5
9.1pF(9R1)
2
3
3, 5
9.2pF(9R2)
2
3
3, 5
9.3pF(9R3)
2
3
3, 5
9.4pF(9R4)
2
3
3, 5
9.5pF(9R5)
2
3
3, 5
9.6pF(9R6)
2
3
3, 5
9.7pF(9R7)
2
3
3, 5
9.8pF(9R8)
2
3
3, 5
9.9pF(9R9)
2
3
3, 5
The part number code is shown in ( ) and Unit is shown in [ ].
3
5
3
5
3
5
3
5
3
5
< >: EIA [inch] Code
Continued on the following page.
10
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
Continued from the preceding page.
6
ex.6: T Dimension [mm]
C0G(5C)
0.6x0.3 1.0x0.5 1.6x0.8
(03) (15)
(18)
<0201> <0402> <0603>
TC
0.4x0.2
(02)
<01005>
LxW
[mm]
2.0x1.25
(21)
<0805>
3.2x1.6
(31)
<1206>
0.6x0.3
(03)
<0201>
U2J(7U)
1.0x0.5 1.6x0.8
(15)
(18)
<0402> <0603>
2.0x1.25 3.2x1.6
(21)
(31)
<0805> <1206>
Rated Voltage 16 10 6.3 50 50 100 50 100 50 100 50 50 25 50 10 50 10 50 10 50
[Vdc] (1C) (1A) (0J) (1H) (1H) (1E) (1H) (1E) (1H) (1E) (1H) (1H) (1E) (1H) (1A) (1H) (1A) (1H) (1A) (1H)
Capacitance
10pF(100)
2
3
3, 5
8
8
3
5
12pF(120)
2
3
3, 5
8
8
3
5
15pF(150)
2
3
3, 5
8
8
3
18pF(180)
2
3
3, 5
8
8
3
5
22pF(220)
2
3
3, 5
8
8
3
5
27pF(270)
2
3
3, 5
8
8
3
5
33pF(330)
2
3
3, 5
8
8
3
5
39pF(390)
2
3
3, 5
8
8
3
5
47pF(470)
2
3
3, 5
8
8
3
5
5
56pF(560)
2
2
3
3, 5
8
8
3
5
68pF(680)
2
2
3
3, 5
8
8
3
5
82pF(820)
2
2
3
3, 5
8
8
3
5
100pF(101)
2
2
3
3, 5
8
8
6
3
5
120pF(121)
3, 5
8
8
6
5
150pF(151)
3, 5
8
8
6
5
180pF(181)
3, 5
8
8
6
5
220pF(221)
3, 5
8
8
6
270pF(271)
3, 5
8
8
6
330pF(331)
3, 5
8
8
6
390pF(391)
3, 5
8
8
6
470pF(471)
3, 5
8
8
6
560pF(561)
3, 5
8
8
6
680pF(681)
3, 5
8
8
6
820pF(821)
5
8
8
6
1000pF(102)
5
8
8
6
1200pF(122)
8
8
6
6
1500pF(152)
8
8
5
8
5
8
8
6
6
1800pF(182)
8
6
6
9
5
8
2200pF(222)
8
6
6
9
5
5, 8
2700pF(272)
8
6
6
9
5
5, 8
3300pF(332)
8
6
6
9
5
5, 8
3900pF(392)
8
6
9
4700pF(472)
6
9
9
5600pF(562)
9
9
9
8
5
6800pF(682)
9
9
9
8
5
8200pF(822)
9
9
9
8
5
10000pF(103)
9
9
9
8
5
6
12000pF(123)
9
9
8
6
15000pF(153)
9
9
8
6
18000pF(183)
B
9
8
6
22000pF(223)
B
9
8
9
5
5, 8
5
5, 8
27000pF(273)
9
9
33000pF(333)
9
A
39000pF(393)
9
B
47000pF(473)
M
B
56000pF(563)
M
9
9
68000pF(683)
C
B
M
82000pF(823)
C
B
M
0.1µF(104)
C
B
M
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
Continued on the following page.
11
1
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
Capacitance Table
Continued from the preceding page.
Temperature Compensating Type P2H(6P),R2H(6R),S2H(6S),T2H(6T) Characteristics
6
ex.6: T Dimension [mm]
TC
P2H
(6P)
R2H
(6R)
S2H
(6S)
T2H
(6T)
LxW 1.0x0.5 0.6x0.3 1.0x0.5 0.6x0.3 1.0x0.5 0.6x0.3 1.0x0.5
(15) (03) (15) (03) (15) (03) (15)
[mm] <0402> <0201> <0402> <0201> <0402> <0201> <0402>
Rated Voltage 50 25 50 25 50 25 50
[Vdc] (1H) (1E) (1H) (1E) (1H) (1E) (1H)
Capacitance
1.0pF(1R0)
5
3
5
3
5
3
5
2.0pF(2R0)
5
3
5
3
5
3
5
3.0pF(3R0)
5
3
5
3
5
3
5
4.0pF(4R0)
5
3
5
3
5
3
5
5.0pF(5R0)
5
3
5
3
5
3
5
6.0pF(6R0)
5
3
5
3
5
3
5
7.0pF(7R0)
5
3
5
3
5
3
5
8.0pF(8R0)
5
3
5
3
5
3
5
9.0pF(9R0)
5
3
5
3
5
3
5
10pF(100)
5
3
5
3
5
3
5
12pF(120)
5
3
5
3
5
3
5
15pF(150)
5
3
5
3
5
3
5
18pF(180)
5
3
5
3
5
3
5
22pF(220)
5
3
5
3
5
3
5
27pF(270)
5
3
5
3
5
3
5
33pF(330)
3
5
3
5
3
5
39pF(390)
3
3
5
3
5
47pF(470)
3
3
3
5
56pF(560)
3
3
3
5
68pF(680)
3
3
3
5
5
82pF(820)
3
3
3
100pF(101)
3
3
3
The part number code is shown in ( ) and Unit is shown in [ ].
5
< >: EIA [inch] Code
Continued on the following page.
12
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
Continued from the preceding page.
High Dielectric Constant Type X7R(R7)/X7S(C7)/X7T(D7)/X7U(E7) Characteristics
5
ex.5: T Dimension [mm]
LxW 0.4x0.2
(02)
[mm] <01005>
0.6x0.3
(03)
<0201>
1.0x0.5
(15)
<0402>
1.6x0.8
(18)
<0603>
2.0x1.25
(21)
<0805>
Rated Voltage 10 25 16 10 100 50 25 16 10 100 50 25 16 10 6.3 4 100 50 25 16 10 6.3 4
[Vdc] (1A) (1E) (1C) (1A) (2A) (1H) (1E) (1C) (1A) (2A) (1H) (1E) (1C) (1A) (0J) (0G) (2A) (1H) (1E) (1C) (1A) (0J) (0G)
Capacitance
68pF(680)
100pF(101)
150pF(151)
220pF(221)
330pF(331)
470pF(471)
680pF(681)
1000pF(102)
1500pF(152)
2200pF(222)
3300pF(332)
4700pF(472)
6800pF(682)
10000pF(103)
15000pF(153)
22000pF(223)
33000pF(333)
47000pF(473)
68000pF(683)
0.10µF(104)
0.15µF(154)
0.22µF(224)
0.33µF(334)
0.47µF(474)
0.68µF(684)
1.0µF(105)
2.2µF(225)
4.7µF(475)
10µF(106)
22µF(226)
2
2
3
2
3
2
3
5
X, 5
8
8
2
3
5
X, 5
8
8
2
3
5
X, 5
8
8
3
5
X, 5
8
8
3
5
X, 5
8
8
3
5
X, 5
8
8
3
5
5
8
8
3
5
5
X
8
8
5
5
5
X
8
8
3
5
5
X
8
8
3
5
5
X
8
8
8
B
5
5
5
8
8
B
5
5
5
8
8
B
5
5
8
8
B
9
5
5
8
8
B
B
8
8
B
9
8
8
B
B
3
X
5
5
5
5
8
9
8
8
8
8
8
B
B
A
B
B
8
8
A
9
B
8
8
B
B
9
9
9
B
9, B
B
B
B
B
B
B
8
8
8
5, 8
8
8
8
B
B
B
3.2x1.6
(31)
<1206>
LxW
[mm]
3.2x2.5
(32)
<1210>
Rated Voltage 100 50 25 16 10 6.3 4 100 50 35 25 16 10 6.3
[Vdc] (2A) (1H) (1E) (1C) (1A) (0J) (0G) (2A) (1H) (YA) (1E) (1C) (1A) (0J)
Capacitance
15000pF(153)
22000pF(223)
33000pF(333)
47000pF(473)
68000pF(683)
0.10µF(104)
0.15µF(154)
0.22µF(224)
0.33µF(334)
0.47µF(474)
0.68µF(684)
1.0µF(105)
2.2µF(225)
4.7µF(475)
10µF(106)
22µF(226)
47µF(476)
9
M
M
M
M
9
M
M
M
M
M
M
M
M
C
C
M
C
9
C
M
M
C
C
C
C
C
N
E
E
E
C
C
C
The part number code is shown in ( ) and Unit is shown in [ ].
D
E
C
E
E
E
< >: EIA [inch] Code
Continued on the following page.
13
1
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
Capacitance Table
Continued from the preceding page.
High Dielectric Constant Type X6S(C8)/X6T(D8) Characteristics
5
ex.5: T Dimension [mm]
LxW 0.6x0.3
(03)
[mm] <0201>
1.0x0.5
(15)
<0402>
1.6x0.8
(18)
<0603>
2.0x1.25
(21)
<0805>
3.2x1.6
(31)
<1206>
3.2x2.5
(32)
<1210>
Rated Voltage 6.3 25 6.3 4
10 6.3 4 2.5 25 16 10 6.3 4
25 16 10 6.3 4
25 10 6.3
[Vdc] (0J) (1E) (0J) (0G) (1A) (0J) (0G) (0E) (1E) (1C) (1A) (0J) (0G) (1E) (1C) (1A) (0J) (0G) (1E) (1A) (0J)
Capacitance
15000pF(153)
3
22000pF(223)
3
33000pF(333)
3
47000pF(473)
3
68000pF(683)
5
0.10µF(104)
5
0.15µF(154)
5
5
0.22µF(224)
5
5
0.33µF(334)
5
5
0.47µF(474)
5
5
0.68µF(684)
5
1.0µF(105)
5
5
2.2µF(225)
8
8
4.7µF(475)
10µF(106)
8
6
B
8
22µF(226)
B
9
9
B
9, B
9
9
B
47µF(476)
D
C
C
E
C
C
100µF(107)
The part number code is shown in ( ) and Unit is shown in [ ].
6
9
8
C
E
E
C
< >: EIA [inch] Code
Continued on the following page.
14
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
Continued from the preceding page.
High Dielectric Constant Type X5R(R6) Characteristics
5
ex.5: T Dimension [mm]
LxW 0.4x0.2
(02)
[mm] <01005>
: Please refer to X7R(R7) etc Characteristics.
0.6x0.3
(03)
<0201>
1.0x0.5
(15)
<0402>
1.6x0.8
(18)
<0603>
Rated Voltage 10 6.3 25 16 10 6.3 100 50 25 16 10 6.3 4 100 50 25 16 10 6.3 4
[Vdc] (1A) (0J) (1E) (1C) (1A) (0J) (2A) (1H) (1E) (1C) (1A) (0J) (0G) (2A) (1H) (1E) (1C) (1A) (0J) (0G)
Capacitance
68pF(680)
100pF(101)
150pF(151)
220pF(221)
330pF(331)
470pF(471)
680pF(681)
1000pF(102)
1500pF(152)
2200pF(222)
3300pF(332)
4700pF(472)
6800pF(682)
10000pF(103)
15000pF(153)
22000pF(223)
33000pF(333)
47000pF(473)
68000pF(683)
0.10µF(104)
0.15µF(154)
0.22µF(224)
0.33µF(334)
0.47µF(474)
0.68µF(684)
1.0µF(105)
2.2µF(225)
4.7µF(475)
10µF(106)
2
2
2
2
2
2
2
2
2
3
2
3
2
3
2
3
2
3
2
3
5
8
5
8
5
8
8
3
8
3
5
3
5
5
5
5
5
5
5
5
5
5
3
5
5
5
5
5
5
5
5
5
5
8
8
8
8
8
8
8
8
8
5, 8
5
8
8
8
5
5
8
8
2.0x1.25
(21)
<0805>
LxW
[mm]
3.2x1.6
(31)
<1206>
8
3.2x2.5
(32)
<1210>
Rated Voltage 100 50 25 16 10 6.3 4 100 50 25 16 10 6.3 4 100 50 35 25 16 10 6.3
[Vdc] (2A) (1H) (1E) (1C) (1A) (0J) (0G) (2A) (1H) (1E) (1C) (1A) (0J) (0G) (2A) (1H) (YA) (1E) (1C) (1A) (0J)
Capacitance
6800pF(682)
10000pF(103)
15000pF(153)
22000pF(223)
33000pF(333)
47000pF(473)
68000pF(683)
0.10µF(104)
0.15µF(154)
0.22µF(224)
0.33µF(334)
0.47µF(474)
0.68µF(684)
1.0µF(105)
2.2µF(225)
4.7µF(475)
10µF(106)
22µF(226)
47µF(476)
100µF(107)
B
B
6
B
9, B 9, B
B
9, B
9
B
9, B
B
C
6
9,C 9,C
C
9
B
The part number code is shown in ( ) and Unit is shown in [ ].
9
9, C
9
C
C
E
E
C
C
D
E
C
E
C
< >: EIA [inch] Code
15
1
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
Temperature Compensating Type C0G(5C) Characteristics
LxW [mm]
0.4x0.2(02)<01005>
0.6x0.3(03)<0201>
1.0x0.5(15)<0402>
16(1C)
50(1H)
50(1H)
Rated Volt. [Vdc]
Capacitance
Tolerance
Part Number
0.1pF(R10)
±0.05pF(W)
0.2pF(R20)
±0.05pF(W)
±0.1pF(B)
GRM0225C1CR20BD05L
GRM0335C1HR20BD01D
GRM1555C1HR20BA01D
0.3pF(R30)
±0.05pF(W)
GRM0225C1CR30WD05L
GRM0335C1HR30WD01D
GRM1555C1HR30WA01D
±0.1pF(B)
GRM0225C1CR30BD05L
GRM0335C1HR30BD01D
GRM1555C1HR30BA01D
0.4pF(R40)
±0.05pF(W)
GRM0225C1CR40WD05L
GRM0335C1HR40WD01D
GRM1555C1HR40WA01D
±0.1pF(B)
GRM0225C1CR40BD05L
GRM0335C1HR40BD01D
GRM1555C1HR40BA01D
0.5pF(R50)
±0.05pF(W)
GRM0225C1CR50WD05L
GRM0335C1HR50WD01D
GRM1555C1HR50WA01D
±0.1pF(B)
GRM0225C1CR50BD05L
GRM0335C1HR50BD01D
GRM1555C1HR50BA01D
0.6pF(R60)
±0.05pF(W)
GRM0225C1CR60WD05L
GRM0335C1HR60WD01D
GRM1555C1HR60WA01D
±0.1pF(B)
GRM0225C1CR60BD05L
GRM0335C1HR60BD01D
GRM1555C1HR60BA01D
0.7pF(R70)
±0.05pF(W)
GRM0225C1CR70WD05L
GRM0335C1HR70WD01D
GRM1555C1HR70WA01D
±0.1pF(B)
GRM0225C1CR70BD05L
GRM0335C1HR70BD01D
GRM1555C1HR70BA01D
0.8pF(R80)
±0.05pF(W)
GRM0225C1CR80WD05L
GRM0335C1HR80WD01D
GRM1555C1HR80WA01D
±0.1pF(B)
GRM0225C1CR80BD05L
GRM0335C1HR80BD01D
GRM1555C1HR80BA01D
±0.05pF(W)
GRM0225C1CR90WD05L
GRM0335C1HR90WD01D
GRM1555C1HR90WA01D
±0.1pF(B)
GRM0225C1CR90BD05L
GRM0335C1HR90BD01D
GRM1555C1HR90BA01D
±0.05pF(W)
GRM0225C1C1R0WD05L
GRM0335C1H1R0WD01D
GRM1555C1H1R0WA01D
GRM1555C1H1R0BA01D
GRM0335C1HR10WD01D
±0.1pF(B)
0.9pF(R90)
1.0pF(1R0)
1.1pF(1R1)
1.2pF(1R2)
1.3pF(1R3)
1.4pF(1R4)
1.5pF(1R5)
1.6pF(1R6)
1.7pF(1R7)
1.8pF(1R8)
1.9pF(1R9)
2.0pF(2R0)
GRM0225C1CR20WD05L
GRM1555C1HR10WA01D
GRM0335C1HR10BD01D
GRM1555C1HR10BA01D
GRM0335C1HR20WD01D
GRM1555C1HR20WA01D
±0.1pF(B)
GRM0225C1C1R0BD05L
GRM0335C1H1R0BD01D
±0.25pF(C)
GRM0225C1C1R0CD05L
GRM0335C1H1R0CD01D
GRM1555C1H1R0CA01D
±0.05pF(W)
GRM0225C1C1R1WD05L
GRM0335C1H1R1WD01D
GRM1555C1H1R1WA01D
GRM1555C1H1R1BA01D
±0.1pF(B)
GRM0225C1C1R1BD05L
GRM0335C1H1R1BD01D
±0.25pF(C)
GRM0225C1C1R1CD05L
GRM0335C1H1R1CD01D
GRM1555C1H1R1CA01D
±0.05pF(W)
GRM0225C1C1R2WD05L
GRM0335C1H1R2WD01D
GRM1555C1H1R2WA01D
GRM1555C1H1R2BA01D
±0.1pF(B)
GRM0225C1C1R2BD05L
GRM0335C1H1R2BD01D
±0.25pF(C)
GRM0225C1C1R2CD05L
GRM0335C1H1R2CD01D
GRM1555C1H1R2CA01D
±0.05pF(W)
GRM0225C1C1R3WD05L
GRM0335C1H1R3WD01D
GRM1555C1H1R3WA01D
GRM1555C1H1R3BA01D
±0.1pF(B)
GRM0225C1C1R3BD05L
GRM0335C1H1R3BD01D
±0.25pF(C)
GRM0225C1C1R3CD05L
GRM0335C1H1R3CD01D
GRM1555C1H1R3CA01D
±0.05pF(W)
GRM0225C1C1R4WD05L
GRM0335C1H1R4WD01D
GRM1555C1H1R4WA01D
±0.1pF(B)
GRM0225C1C1R4BD05L
GRM0335C1H1R4BD01D
GRM1555C1H1R4BA01D
±0.25pF(C)
GRM0225C1C1R4CD05L
GRM0335C1H1R4CD01D
GRM1555C1H1R4CA01D
±0.05pF(W)
GRM0225C1C1R5WD05L
GRM0335C1H1R5WD01D
GRM1555C1H1R5WA01D
GRM1555C1H1R5BA01D
±0.1pF(B)
GRM0225C1C1R5BD05L
GRM0335C1H1R5BD01D
±0.25pF(C)
GRM0225C1C1R5CD05L
GRM0335C1H1R5CD01D
GRM1555C1H1R5CA01D
±0.05pF(W)
GRM0225C1C1R6WD05L
GRM0335C1H1R6WD01D
GRM1555C1H1R6WA01D
GRM1555C1H1R6BA01D
±0.1pF(B)
GRM0225C1C1R6BD05L
GRM0335C1H1R6BD01D
±0.25pF(C)
GRM0225C1C1R6CD05L
GRM0335C1H1R6CD01D
GRM1555C1H1R6CA01D
±0.05pF(W)
GRM0225C1C1R7WD05L
GRM0335C1H1R7WD01D
GRM1555C1H1R7WA01D
GRM1555C1H1R7BA01D
±0.1pF(B)
GRM0225C1C1R7BD05L
GRM0335C1H1R7BD01D
±0.25pF(C)
GRM0225C1C1R7CD05L
GRM0335C1H1R7CD01D
GRM1555C1H1R7CA01D
±0.05pF(W)
GRM0225C1C1R8WD05L
GRM0335C1H1R8WD01D
GRM1555C1H1R8WA01D
GRM1555C1H1R8BA01D
±0.1pF(B)
GRM0225C1C1R8BD05L
GRM0335C1H1R8BD01D
±0.25pF(C)
GRM0225C1C1R8CD05L
GRM0335C1H1R8CD01D
GRM1555C1H1R8CA01D
±0.05pF(W)
GRM0225C1C1R9WD05L
GRM0335C1H1R9WD01D
GRM1555C1H1R9WA01D
±0.1pF(B)
GRM0225C1C1R9BD05L
GRM0335C1H1R9BD01D
GRM1555C1H1R9BA01D
±0.25pF(C)
GRM0225C1C1R9CD05L
GRM0335C1H1R9CD01D
GRM1555C1H1R9CA01D
±0.05pF(W)
GRM0225C1C2R0WD05L
GRM0335C1H2R0WD01D
GRM1555C1H2R0WA01D
±0.1pF(B)
GRM0225C1C2R0BD05L
GRM0335C1H2R0BD01D
GRM1555C1H2R0BA01D
±0.25pF(C)
GRM0225C1C2R0CD05L
GRM0335C1H2R0CD01D
GRM1555C1H2R0CA01D
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
qProduct ID
wSeries
tTemperature Characteristics
u i o !0 iCapacitance Tolerance
q w e r t y
Packaging Code in Part Number is a code shows STD 180mm Reel Taping.
(Part Number) GR
16
M
02
2
5C 1C
R20 W
D05 L
eDimension (LxW)
rDimension (T)
yRated Voltage
uCapacitance
oIndividual Specification Code !0Packaging*
*GRM022: D is applicable.
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
Temperature Compensating Type C0G(5C) Characteristics
LxW [mm]
Rated Volt. [Vdc]
Capacitance
2.1pF(2R1)
2.2pF(2R2)
2.3pF(2R3)
2.4pF(2R4)
2.5pF(2R5)
2.6pF(2R6)
2.7pF(2R7)
2.8pF(2R8)
2.9pF(2R9)
3.0pF(3R0)
3.1pF(3R1)
3.2pF(3R2)
3.3pF(3R3)
3.4pF(3R4)
3.5pF(3R5)
3.6pF(3R6)
3.7pF(3R7)
0.4x0.2(02)<01005>
0.6x0.3(03)<0201>
1.0x0.5(15)<0402>
16(1C)
50(1H)
50(1H)
Tolerance
Part Number
±0.05pF(W)
GRM0225C1C2R1WD05L
GRM0335C1H2R1WD01D
GRM1555C1H2R1WA01D
±0.1pF(B)
GRM0225C1C2R1BD05L
GRM0335C1H2R1BD01D
GRM1555C1H2R1BA01D
±0.25pF(C)
GRM0225C1C2R1CD05L
GRM0335C1H2R1CD01D
GRM1555C1H2R1CA01D
±0.05pF(W)
GRM0225C1C2R2WD05L
GRM0335C1H2R2WD01D
GRM1555C1H2R2WA01D
±0.1pF(B)
GRM0225C1C2R2BD05L
GRM0335C1H2R2BD01D
GRM1555C1H2R2BA01D
±0.25pF(C)
GRM0225C1C2R2CD05L
GRM0335C1H2R2CD01D
GRM1555C1H2R2CA01D
±0.05pF(W)
GRM0225C1C2R3WD05L
GRM0335C1H2R3WD01D
GRM1555C1H2R3WA01D
GRM1555C1H2R3BA01D
±0.1pF(B)
GRM0225C1C2R3BD05L
GRM0335C1H2R3BD01D
±0.25pF(C)
GRM0225C1C2R3CD05L
GRM0335C1H2R3CD01D
GRM1555C1H2R3CA01D
±0.05pF(W)
GRM0225C1C2R4WD05L
GRM0335C1H2R4WD01D
GRM1555C1H2R4WA01D
GRM1555C1H2R4BA01D
±0.1pF(B)
GRM0225C1C2R4BD05L
GRM0335C1H2R4BD01D
±0.25pF(C)
GRM0225C1C2R4CD05L
GRM0335C1H2R4CD01D
GRM1555C1H2R4CA01D
±0.05pF(W)
GRM0225C1C2R5WD05L
GRM0335C1H2R5WD01D
GRM1555C1H2R5WA01D
GRM1555C1H2R5BA01D
±0.1pF(B)
GRM0225C1C2R5BD05L
GRM0335C1H2R5BD01D
±0.25pF(C)
GRM0225C1C2R5CD05L
GRM0335C1H2R5CD01D
GRM1555C1H2R5CA01D
±0.05pF(W)
GRM0225C1C2R6WD05L
GRM0335C1H2R6WD01D
GRM1555C1H2R6WA01D
GRM1555C1H2R6BA01D
±0.1pF(B)
GRM0225C1C2R6BD05L
GRM0335C1H2R6BD01D
±0.25pF(C)
GRM0225C1C2R6CD05L
GRM0335C1H2R6CD01D
GRM1555C1H2R6CA01D
±0.05pF(W)
GRM0225C1C2R7WD05L
GRM0335C1H2R7WD01D
GRM1555C1H2R7WA01D
±0.1pF(B)
GRM0225C1C2R7BD05L
GRM0335C1H2R7BD01D
GRM1555C1H2R7BA01D
±0.25pF(C)
GRM0225C1C2R7CD05L
GRM0335C1H2R7CD01D
GRM1555C1H2R7CA01D
±0.05pF(W)
GRM0225C1C2R8WD05L
GRM0335C1H2R8WD01D
GRM1555C1H2R8WA01D
±0.1pF(B)
GRM0225C1C2R8BD05L
GRM0335C1H2R8BD01D
GRM1555C1H2R8BA01D
±0.25pF(C)
GRM0225C1C2R8CD05L
GRM0335C1H2R8CD01D
GRM1555C1H2R8CA01D
±0.05pF(W)
GRM0225C1C2R9WD05L
GRM0335C1H2R9WD01D
GRM1555C1H2R9WA01D
±0.1pF(B)
GRM0225C1C2R9BD05L
GRM0335C1H2R9BD01D
GRM1555C1H2R9BA01D
±0.25pF(C)
GRM0225C1C2R9CD05L
GRM0335C1H2R9CD01D
GRM1555C1H2R9CA01D
±0.05pF(W)
GRM0225C1C3R0WD05L
GRM0335C1H3R0WD01D
GRM1555C1H3R0WA01D
GRM1555C1H3R0BA01D
±0.1pF(B)
GRM0225C1C3R0BD05L
GRM0335C1H3R0BD01D
±0.25pF(C)
GRM0225C1C3R0CD05L
GRM0335C1H3R0CD01D
GRM1555C1H3R0CA01D
±0.05pF(W)
GRM0225C1C3R1WD05L
GRM0335C1H3R1WD01D
GRM1555C1H3R1WA01D
±0.1pF(B)
GRM0225C1C3R1BD05L
GRM0335C1H3R1BD01D
GRM1555C1H3R1BA01D
±0.25pF(C)
GRM0225C1C3R1CD05L
GRM0335C1H3R1CD01D
GRM1555C1H3R1CA01D
±0.05pF(W)
GRM0225C1C3R2WD05L
GRM0335C1H3R2WD01D
GRM1555C1H3R2WA01D
GRM1555C1H3R2BA01D
±0.1pF(B)
GRM0225C1C3R2BD05L
GRM0335C1H3R2BD01D
±0.25pF(C)
GRM0225C1C3R2CD05L
GRM0335C1H3R2CD01D
GRM1555C1H3R2CA01D
±0.05pF(W)
GRM0225C1C3R3WD05L
GRM0335C1H3R3WD01D
GRM1555C1H3R3WA01D
GRM1555C1H3R3BA01D
±0.1pF(B)
GRM0225C1C3R3BD05L
GRM0335C1H3R3BD01D
±0.25pF(C)
GRM0225C1C3R3CD05L
GRM0335C1H3R3CD01D
GRM1555C1H3R3CA01D
±0.05pF(W)
GRM0225C1C3R4WD05L
GRM0335C1H3R4WD01D
GRM1555C1H3R4WA01D
±0.1pF(B)
GRM0225C1C3R4BD05L
GRM0335C1H3R4BD01D
GRM1555C1H3R4BA01D
±0.25pF(C)
GRM0225C1C3R4CD05L
GRM0335C1H3R4CD01D
GRM1555C1H3R4CA01D
±0.05pF(W)
GRM0225C1C3R5WD05L
GRM0335C1H3R5WD01D
GRM1555C1H3R5WA01D
±0.1pF(B)
GRM0225C1C3R5BD05L
GRM0335C1H3R5BD01D
GRM1555C1H3R5BA01D
±0.25pF(C)
GRM0225C1C3R5CD05L
GRM0335C1H3R5CD01D
GRM1555C1H3R5CA01D
±0.05pF(W)
GRM0225C1C3R6WD05L
GRM0335C1H3R6WD01D
GRM1555C1H3R6WA01D
±0.1pF(B)
GRM0225C1C3R6BD05L
GRM0335C1H3R6BD01D
GRM1555C1H3R6BA01D
±0.25pF(C)
GRM0225C1C3R6CD05L
GRM0335C1H3R6CD01D
GRM1555C1H3R6CA01D
±0.05pF(W)
GRM0225C1C3R7WD05L
GRM0335C1H3R7WD01D
GRM1555C1H3R7WA01D
±0.1pF(B)
GRM0225C1C3R7BD05L
GRM0335C1H3R7BD01D
GRM1555C1H3R7BA01D
±0.25pF(C)
GRM0225C1C3R7CD05L
GRM0335C1H3R7CD01D
GRM1555C1H3R7CA01D
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
17
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
Temperature Compensating Type C0G(5C) Characteristics
LxW [mm]
0.4x0.2(02)<01005>
0.6x0.3(03)<0201>
1.0x0.5(15)<0402>
16(1C)
50(1H)
50(1H)
Rated Volt. [Vdc]
Capacitance
Tolerance
3.8pF(3R8)
3.9pF(3R9)
4.0pF(4R0)
4.1pF(4R1)
4.2pF(4R2)
4.3pF(4R3)
4.4pF(4R4)
4.5pF(4R5)
4.6pF(4R6)
4.7pF(4R7)
4.8pF(4R8)
4.9pF(4R9)
5.0pF(5R0)
5.1pF(5R1)
5.2pF(5R2)
Part Number
±0.05pF(W)
GRM0225C1C3R8WD05L
GRM0335C1H3R8WD01D
GRM1555C1H3R8WA01D
±0.1pF(B)
GRM0225C1C3R8BD05L
GRM0335C1H3R8BD01D
GRM1555C1H3R8BA01D
±0.25pF(C)
GRM0225C1C3R8CD05L
GRM0335C1H3R8CD01D
GRM1555C1H3R8CA01D
±0.05pF(W)
GRM0225C1C3R9WD05L
GRM0335C1H3R9WD01D
GRM1555C1H3R9WA01D
±0.1pF(B)
GRM0225C1C3R9BD05L
GRM0335C1H3R9BD01D
GRM1555C1H3R9BA01D
±0.25pF(C)
GRM0225C1C3R9CD05L
GRM0335C1H3R9CD01D
GRM1555C1H3R9CA01D
±0.05pF(W)
GRM0225C1C4R0WD05L
GRM0335C1H4R0WD01D
GRM1555C1H4R0WA01D
GRM1555C1H4R0BA01D
±0.1pF(B)
GRM0225C1C4R0BD05L
GRM0335C1H4R0BD01D
±0.25pF(C)
GRM0225C1C4R0CD05L
GRM0335C1H4R0CD01D
GRM1555C1H4R0CA01D
±0.05pF(W)
GRM0225C1C4R1WD05L
GRM0335C1H4R1WD01D
GRM1555C1H4R1WA01D
GRM1555C1H4R1BA01D
±0.1pF(B)
GRM0225C1C4R1BD05L
GRM0335C1H4R1BD01D
±0.25pF(C)
GRM0225C1C4R1CD05L
GRM0335C1H4R1CD01D
GRM1555C1H4R1CA01D
±0.05pF(W)
GRM0225C1C4R2WD05L
GRM0335C1H4R2WD01D
GRM1555C1H4R2WA01D
GRM1555C1H4R2BA01D
±0.1pF(B)
GRM0225C1C4R2BD05L
GRM0335C1H4R2BD01D
±0.25pF(C)
GRM0225C1C4R2CD05L
GRM0335C1H4R2CD01D
GRM1555C1H4R2CA01D
±0.05pF(W)
GRM0225C1C4R3WD05L
GRM0335C1H4R3WD01D
GRM1555C1H4R3WA01D
GRM1555C1H4R3BA01D
±0.1pF(B)
GRM0225C1C4R3BD05L
GRM0335C1H4R3BD01D
±0.25pF(C)
GRM0225C1C4R3CD05L
GRM0335C1H4R3CD01D
GRM1555C1H4R3CA01D
±0.05pF(W)
GRM0225C1C4R4WD05L
GRM0335C1H4R4WD01D
GRM1555C1H4R4WA01D
±0.1pF(B)
GRM0225C1C4R4BD05L
GRM0335C1H4R4BD01D
GRM1555C1H4R4BA01D
±0.25pF(C)
GRM0225C1C4R4CD05L
GRM0335C1H4R4CD01D
GRM1555C1H4R4CA01D
±0.05pF(W)
GRM0225C1C4R5WD05L
GRM0335C1H4R5WD01D
GRM1555C1H4R5WA01D
±0.1pF(B)
GRM0225C1C4R5BD05L
GRM0335C1H4R5BD01D
GRM1555C1H4R5BA01D
±0.25pF(C)
GRM0225C1C4R5CD05L
GRM0335C1H4R5CD01D
GRM1555C1H4R5CA01D
±0.05pF(W)
GRM0225C1C4R6WD05L
GRM0335C1H4R6WD01D
GRM1555C1H4R6WA01D
±0.1pF(B)
GRM0225C1C4R6BD05L
GRM0335C1H4R6BD01D
GRM1555C1H4R6BA01D
±0.25pF(C)
GRM0225C1C4R6CD05L
GRM0335C1H4R6CD01D
GRM1555C1H4R6CA01D
±0.05pF(W)
GRM0225C1C4R7WD05L
GRM0335C1H4R7WD01D
GRM1555C1H4R7WA01D
GRM1555C1H4R7BA01D
±0.1pF(B)
GRM0225C1C4R7BD05L
GRM0335C1H4R7BD01D
±0.25pF(C)
GRM0225C1C4R7CD05L
GRM0335C1H4R7CD01D
GRM1555C1H4R7CA01D
±0.05pF(W)
GRM0225C1C4R8WD05L
GRM0335C1H4R8WD01D
GRM1555C1H4R8WA01D
±0.1pF(B)
GRM0225C1C4R8BD05L
GRM0335C1H4R8BD01D
GRM1555C1H4R8BA01D
±0.25pF(C)
GRM0225C1C4R8CD05L
GRM0335C1H4R8CD01D
GRM1555C1H4R8CA01D
±0.05pF(W)
GRM0225C1C4R9WD05L
GRM0335C1H4R9WD01D
GRM1555C1H4R9WA01D
GRM1555C1H4R9BA01D
±0.1pF(B)
GRM0225C1C4R9BD05L
GRM0335C1H4R9BD01D
±0.25pF(C)
GRM0225C1C4R9CD05L
GRM0335C1H4R9CD01D
GRM1555C1H4R9CA01D
±0.05pF(W)
GRM0225C1C5R0WD05L
GRM0335C1H5R0WD01D
GRM1555C1H5R0WA01D
GRM1555C1H5R0BA01D
±0.1pF(B)
GRM0225C1C5R0BD05L
GRM0335C1H5R0BD01D
±0.25pF(C)
GRM0225C1C5R0CD05L
GRM0335C1H5R0CD01D
GRM1555C1H5R0CA01D
±0.05pF(W)
GRM0225C1C5R1WD05L
GRM0335C1H5R1WD01D
GRM1555C1H5R1WA01D
±0.1pF(B)
GRM0225C1C5R1BD05L
GRM0335C1H5R1BD01D
GRM1555C1H5R1BA01D
±0.25pF(C)
GRM0225C1C5R1CD05L
GRM0335C1H5R1CD01D
GRM1555C1H5R1CA01D
±0.5pF(D)
GRM0225C1C5R1DD05L
GRM0335C1H5R1DD01D
GRM1555C1H5R1DA01D
±0.05pF(W)
GRM0225C1C5R2WD05L
GRM0335C1H5R2WD01D
GRM1555C1H5R2WA01D
±0.1pF(B)
GRM0225C1C5R2BD05L
GRM0335C1H5R2BD01D
GRM1555C1H5R2BA01D
±0.25pF(C)
GRM0225C1C5R2CD05L
GRM0335C1H5R2CD01D
GRM1555C1H5R2CA01D
±0.5pF(D)
GRM0225C1C5R2DD05L
GRM0335C1H5R2DD01D
GRM1555C1H5R2DA01D
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
qProduct ID
wSeries
tTemperature Characteristics
u i o !0 iCapacitance Tolerance
q w e r t y
Packaging Code in Part Number is a code shows STD 180mm Reel Taping.
(Part Number) GR
18
M
02
2
5C 1C
3R8 W
D05 L
eDimension (LxW)
rDimension (T)
yRated Voltage
uCapacitance
oIndividual Specification Code !0Packaging*
*GRM022: D is applicable.
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
Temperature Compensating Type C0G(5C) Characteristics
LxW [mm]
Rated Volt. [Vdc]
Capacitance
5.3pF(5R3)
5.4pF(5R4)
5.5pF(5R5)
5.6pF(5R6)
5.7pF(5R7)
5.8pF(5R8)
5.9pF(5R9)
6.0pF(6R0)
6.1pF(6R1)
6.2pF(6R2)
6.3pF(6R3)
6.4pF(6R4)
6.5pF(6R5)
0.4x0.2(02)<01005>
0.6x0.3(03)<0201>
1.0x0.5(15)<0402>
16(1C)
50(1H)
50(1H)
Tolerance
Part Number
±0.05pF(W)
GRM0225C1C5R3WD05L
GRM0335C1H5R3WD01D
GRM1555C1H5R3WA01D
±0.1pF(B)
GRM0225C1C5R3BD05L
GRM0335C1H5R3BD01D
GRM1555C1H5R3BA01D
±0.25pF(C)
GRM0225C1C5R3CD05L
GRM0335C1H5R3CD01D
GRM1555C1H5R3CA01D
±0.5pF(D)
GRM0225C1C5R3DD05L
GRM0335C1H5R3DD01D
GRM1555C1H5R3DA01D
±0.05pF(W)
GRM0225C1C5R4WD05L
GRM0335C1H5R4WD01D
GRM1555C1H5R4WA01D
±0.1pF(B)
GRM0225C1C5R4BD05L
GRM0335C1H5R4BD01D
GRM1555C1H5R4BA01D
±0.25pF(C)
GRM0225C1C5R4CD05L
GRM0335C1H5R4CD01D
GRM1555C1H5R4CA01D
±0.5pF(D)
GRM0225C1C5R4DD05L
GRM0335C1H5R4DD01D
GRM1555C1H5R4DA01D
±0.05pF(W)
GRM0225C1C5R5WD05L
GRM0335C1H5R5WD01D
GRM1555C1H5R5WA01D
±0.1pF(B)
GRM0225C1C5R5BD05L
GRM0335C1H5R5BD01D
GRM1555C1H5R5BA01D
±0.25pF(C)
GRM0225C1C5R5CD05L
GRM0335C1H5R5CD01D
GRM1555C1H5R5CA01D
±0.5pF(D)
GRM0225C1C5R5DD05L
GRM0335C1H5R5DD01D
GRM1555C1H5R5DA01D
±0.05pF(W)
GRM0225C1C5R6WD05L
GRM0335C1H5R6WD01D
GRM1555C1H5R6WA01D
±0.1pF(B)
GRM0225C1C5R6BD05L
GRM0335C1H5R6BD01D
GRM1555C1H5R6BA01D
±0.25pF(C)
GRM0225C1C5R6CD05L
GRM0335C1H5R6CD01D
GRM1555C1H5R6CA01D
±0.5pF(D)
GRM0225C1C5R6DD05L
GRM0335C1H5R6DD01D
GRM1555C1H5R6DA01D
±0.05pF(W)
GRM0225C1C5R7WD05L
GRM0335C1H5R7WD01D
GRM1555C1H5R7WA01D
±0.1pF(B)
GRM0225C1C5R7BD05L
GRM0335C1H5R7BD01D
GRM1555C1H5R7BA01D
±0.25pF(C)
GRM0225C1C5R7CD05L
GRM0335C1H5R7CD01D
GRM1555C1H5R7CA01D
±0.5pF(D)
GRM0225C1C5R7DD05L
GRM0335C1H5R7DD01D
GRM1555C1H5R7DA01D
±0.05pF(W)
GRM0225C1C5R8WD05L
GRM0335C1H5R8WD01D
GRM1555C1H5R8WA01D
±0.1pF(B)
GRM0225C1C5R8BD05L
GRM0335C1H5R8BD01D
GRM1555C1H5R8BA01D
±0.25pF(C)
GRM0225C1C5R8CD05L
GRM0335C1H5R8CD01D
GRM1555C1H5R8CA01D
±0.5pF(D)
GRM0225C1C5R8DD05L
GRM0335C1H5R8DD01D
GRM1555C1H5R8DA01D
±0.05pF(W)
GRM0225C1C5R9WD05L
GRM0335C1H5R9WD01D
GRM1555C1H5R9WA01D
±0.1pF(B)
GRM0225C1C5R9BD05L
GRM0335C1H5R9BD01D
GRM1555C1H5R9BA01D
±0.25pF(C)
GRM0225C1C5R9CD05L
GRM0335C1H5R9CD01D
GRM1555C1H5R9CA01D
±0.5pF(D)
GRM0225C1C5R9DD05L
GRM0335C1H5R9DD01D
GRM1555C1H5R9DA01D
±0.05pF(W)
GRM0225C1C6R0WD05L
GRM0335C1H6R0WD01D
GRM1555C1H6R0WA01D
±0.1pF(B)
GRM0225C1C6R0BD05L
GRM0335C1H6R0BD01D
GRM1555C1H6R0BA01D
±0.25pF(C)
GRM0225C1C6R0CD05L
GRM0335C1H6R0CD01D
GRM1555C1H6R0CA01D
±0.5pF(D)
GRM0225C1C6R0DD05L
GRM0335C1H6R0DD01D
GRM1555C1H6R0DA01D
±0.05pF(W)
GRM0225C1C6R1WD05L
GRM0335C1H6R1WD01D
GRM1555C1H6R1WA01D
±0.1pF(B)
GRM0225C1C6R1BD05L
GRM0335C1H6R1BD01D
GRM1555C1H6R1BA01D
±0.25pF(C)
GRM0225C1C6R1CD05L
GRM0335C1H6R1CD01D
GRM1555C1H6R1CA01D
±0.5pF(D)
GRM0225C1C6R1DD05L
GRM0335C1H6R1DD01D
GRM1555C1H6R1DA01D
±0.05pF(W)
GRM0225C1C6R2WD05L
GRM0335C1H6R2WD01D
GRM1555C1H6R2WA01D
±0.1pF(B)
GRM0225C1C6R2BD05L
GRM0335C1H6R2BD01D
GRM1555C1H6R2BA01D
±0.25pF(C)
GRM0225C1C6R2CD05L
GRM0335C1H6R2CD01D
GRM1555C1H6R2CA01D
±0.5pF(D)
GRM0225C1C6R2DD05L
GRM0335C1H6R2DD01D
GRM1555C1H6R2DA01D
±0.05pF(W)
GRM0225C1C6R3WD05L
GRM0335C1H6R3WD01D
GRM1555C1H6R3WA01D
±0.1pF(B)
GRM0225C1C6R3BD05L
GRM0335C1H6R3BD01D
GRM1555C1H6R3BA01D
±0.25pF(C)
GRM0225C1C6R3CD05L
GRM0335C1H6R3CD01D
GRM1555C1H6R3CA01D
±0.5pF(D)
GRM0225C1C6R3DD05L
GRM0335C1H6R3DD01D
GRM1555C1H6R3DA01D
±0.05pF(W)
GRM0225C1C6R4WD05L
GRM0335C1H6R4WD01D
GRM1555C1H6R4WA01D
±0.1pF(B)
GRM0225C1C6R4BD05L
GRM0335C1H6R4BD01D
GRM1555C1H6R4BA01D
±0.25pF(C)
GRM0225C1C6R4CD05L
GRM0335C1H6R4CD01D
GRM1555C1H6R4CA01D
±0.5pF(D)
GRM0225C1C6R4DD05L
GRM0335C1H6R4DD01D
GRM1555C1H6R4DA01D
±0.05pF(W)
GRM0225C1C6R5WD05L
GRM0335C1H6R5WD01D
GRM1555C1H6R5WA01D
±0.1pF(B)
GRM0225C1C6R5BD05L
GRM0335C1H6R5BD01D
GRM1555C1H6R5BA01D
±0.25pF(C)
GRM0225C1C6R5CD05L
GRM0335C1H6R5CD01D
GRM1555C1H6R5CA01D
±0.5pF(D)
GRM0225C1C6R5DD05L
GRM0335C1H6R5DD01D
GRM1555C1H6R5DA01D
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
19
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
Temperature Compensating Type C0G(5C) Characteristics
LxW [mm]
0.4x0.2(02)<01005>
0.6x0.3(03)<0201>
1.0x0.5(15)<0402>
16(1C)
50(1H)
50(1H)
Rated Volt. [Vdc]
Capacitance
Tolerance
6.6pF(6R6)
6.7pF(6R7)
6.8pF(6R8)
6.9pF(6R9)
7.0pF(7R0)
7.1pF(7R1)
7.2pF(7R2)
7.3pF(7R3)
7.4pF(7R4)
7.5pF(7R5)
7.6pF(7R6)
7.7pF(7R7)
Part Number
±0.05pF(W)
GRM0225C1C6R6WD05L
GRM0335C1H6R6WD01D
GRM1555C1H6R6WA01D
±0.1pF(B)
GRM0225C1C6R6BD05L
GRM0335C1H6R6BD01D
GRM1555C1H6R6BA01D
±0.25pF(C)
GRM0225C1C6R6CD05L
GRM0335C1H6R6CD01D
GRM1555C1H6R6CA01D
±0.5pF(D)
GRM0225C1C6R6DD05L
GRM0335C1H6R6DD01D
GRM1555C1H6R6DA01D
±0.05pF(W)
GRM0225C1C6R7WD05L
GRM0335C1H6R7WD01D
GRM1555C1H6R7WA01D
±0.1pF(B)
GRM0225C1C6R7BD05L
GRM0335C1H6R7BD01D
GRM1555C1H6R7BA01D
±0.25pF(C)
GRM0225C1C6R7CD05L
GRM0335C1H6R7CD01D
GRM1555C1H6R7CA01D
±0.5pF(D)
GRM0225C1C6R7DD05L
GRM0335C1H6R7DD01D
GRM1555C1H6R7DA01D
±0.05pF(W)
GRM0225C1C6R8WD05L
GRM0335C1H6R8WD01D
GRM1555C1H6R8WA01D
±0.1pF(B)
GRM0225C1C6R8BD05L
GRM0335C1H6R8BD01D
GRM1555C1H6R8BA01D
±0.25pF(C)
GRM0225C1C6R8CD05L
GRM0335C1H6R8CD01D
GRM1555C1H6R8CA01D
±0.5pF(D)
GRM0225C1C6R8DD05L
GRM0335C1H6R8DD01D
GRM1555C1H6R8DA01D
±0.05pF(W)
GRM0225C1C6R9WD05L
GRM0335C1H6R9WD01D
GRM1555C1H6R9WA01D
±0.1pF(B)
GRM0225C1C6R9BD05L
GRM0335C1H6R9BD01D
GRM1555C1H6R9BA01D
±0.25pF(C)
GRM0225C1C6R9CD05L
GRM0335C1H6R9CD01D
GRM1555C1H6R9CA01D
±0.5pF(D)
GRM0225C1C6R9DD05L
GRM0335C1H6R9DD01D
GRM1555C1H6R9DA01D
±0.05pF(W)
GRM0225C1C7R0WD05L
GRM0335C1H7R0WD01D
GRM1555C1H7R0WA01D
±0.1pF(B)
GRM0225C1C7R0BD05L
GRM0335C1H7R0BD01D
GRM1555C1H7R0BA01D
±0.25pF(C)
GRM0225C1C7R0CD05L
GRM0335C1H7R0CD01D
GRM1555C1H7R0CA01D
±0.5pF(D)
GRM0225C1C7R0DD05L
GRM0335C1H7R0DD01D
GRM1555C1H7R0DA01D
±0.05pF(W)
GRM0225C1C7R1WD05L
GRM0335C1H7R1WD01D
GRM1555C1H7R1WA01D
±0.1pF(B)
GRM0225C1C7R1BD05L
GRM0335C1H7R1BD01D
GRM1555C1H7R1BA01D
±0.25pF(C)
GRM0225C1C7R1CD05L
GRM0335C1H7R1CD01D
GRM1555C1H7R1CA01D
±0.5pF(D)
GRM0225C1C7R1DD05L
GRM0335C1H7R1DD01D
GRM1555C1H7R1DA01D
±0.05pF(W)
GRM0225C1C7R2WD05L
GRM0335C1H7R2WD01D
GRM1555C1H7R2WA01D
±0.1pF(B)
GRM0225C1C7R2BD05L
GRM0335C1H7R2BD01D
GRM1555C1H7R2BA01D
±0.25pF(C)
GRM0225C1C7R2CD05L
GRM0335C1H7R2CD01D
GRM1555C1H7R2CA01D
±0.5pF(D)
GRM0225C1C7R2DD05L
GRM0335C1H7R2DD01D
GRM1555C1H7R2DA01D
±0.05pF(W)
GRM0225C1C7R3WD05L
GRM0335C1H7R3WD01D
GRM1555C1H7R3WA01D
±0.1pF(B)
GRM0225C1C7R3BD05L
GRM0335C1H7R3BD01D
GRM1555C1H7R3BA01D
±0.25pF(C)
GRM0225C1C7R3CD05L
GRM0335C1H7R3CD01D
GRM1555C1H7R3CA01D
±0.5pF(D)
GRM0225C1C7R3DD05L
GRM0335C1H7R3DD01D
GRM1555C1H7R3DA01D
±0.05pF(W)
GRM0225C1C7R4WD05L
GRM0335C1H7R4WD01D
GRM1555C1H7R4WA01D
±0.1pF(B)
GRM0225C1C7R4BD05L
GRM0335C1H7R4BD01D
GRM1555C1H7R4BA01D
±0.25pF(C)
GRM0225C1C7R4CD05L
GRM0335C1H7R4CD01D
GRM1555C1H7R4CA01D
±0.5pF(D)
GRM0225C1C7R4DD05L
GRM0335C1H7R4DD01D
GRM1555C1H7R4DA01D
±0.05pF(W)
GRM0225C1C7R5WD05L
GRM0335C1H7R5WD01D
GRM1555C1H7R5WA01D
±0.1pF(B)
GRM0225C1C7R5BD05L
GRM0335C1H7R5BD01D
GRM1555C1H7R5BA01D
±0.25pF(C)
GRM0225C1C7R5CD05L
GRM0335C1H7R5CD01D
GRM1555C1H7R5CA01D
±0.5pF(D)
GRM0225C1C7R5DD05L
GRM0335C1H7R5DD01D
GRM1555C1H7R5DA01D
±0.05pF(W)
GRM0225C1C7R6WD05L
GRM0335C1H7R6WD01D
GRM1555C1H7R6WA01D
±0.1pF(B)
GRM0225C1C7R6BD05L
GRM0335C1H7R6BD01D
GRM1555C1H7R6BA01D
±0.25pF(C)
GRM0225C1C7R6CD05L
GRM0335C1H7R6CD01D
GRM1555C1H7R6CA01D
±0.5pF(D)
GRM0225C1C7R6DD05L
GRM0335C1H7R6DD01D
GRM1555C1H7R6DA01D
±0.05pF(W)
GRM0225C1C7R7WD05L
GRM0335C1H7R7WD01D
GRM1555C1H7R7WA01D
±0.1pF(B)
GRM0225C1C7R7BD05L
GRM0335C1H7R7BD01D
GRM1555C1H7R7BA01D
±0.25pF(C)
GRM0225C1C7R7CD05L
GRM0335C1H7R7CD01D
GRM1555C1H7R7CA01D
±0.5pF(D)
GRM0225C1C7R7DD05L
GRM0335C1H7R7DD01D
GRM1555C1H7R7DA01D
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
qProduct ID
wSeries
tTemperature Characteristics
u i o !0 iCapacitance Tolerance
q w e r t y
Packaging Code in Part Number is a code shows STD 180mm Reel Taping.
(Part Number) GR
20
M
02
2
5C 1C
6R6 W
D05 L
eDimension (LxW)
rDimension (T)
yRated Voltage
uCapacitance
oIndividual Specification Code !0Packaging*
*GRM022: D is applicable.
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
Temperature Compensating Type C0G(5C) Characteristics
LxW [mm]
Rated Volt. [Vdc]
Capacitance
7.8pF(7R8)
7.9pF(7R9)
8.0pF(8R0)
8.1pF(8R1)
8.2pF(8R2)
8.3pF(8R3)
8.4pF(8R4)
8.5pF(8R5)
8.6pF(8R6)
8.7pF(8R7)
8.8pF(8R8)
8.9pF(8R9)
9.0pF(9R0)
0.4x0.2(02)<01005>
0.6x0.3(03)<0201>
1.0x0.5(15)<0402>
16(1C)
50(1H)
50(1H)
Tolerance
Part Number
±0.05pF(W)
GRM0225C1C7R8WD05L
GRM0335C1H7R8WD01D
GRM1555C1H7R8WA01D
±0.1pF(B)
GRM0225C1C7R8BD05L
GRM0335C1H7R8BD01D
GRM1555C1H7R8BA01D
±0.25pF(C)
GRM0225C1C7R8CD05L
GRM0335C1H7R8CD01D
GRM1555C1H7R8CA01D
±0.5pF(D)
GRM0225C1C7R8DD05L
GRM0335C1H7R8DD01D
GRM1555C1H7R8DA01D
±0.05pF(W)
GRM0225C1C7R9WD05L
GRM0335C1H7R9WD01D
GRM1555C1H7R9WA01D
±0.1pF(B)
GRM0225C1C7R9BD05L
GRM0335C1H7R9BD01D
GRM1555C1H7R9BA01D
±0.25pF(C)
GRM0225C1C7R9CD05L
GRM0335C1H7R9CD01D
GRM1555C1H7R9CA01D
±0.5pF(D)
GRM0225C1C7R9DD05L
GRM0335C1H7R9DD01D
GRM1555C1H7R9DA01D
±0.05pF(W)
GRM0225C1C8R0WD05L
GRM0335C1H8R0WD01D
GRM1555C1H8R0WA01D
±0.1pF(B)
GRM0225C1C8R0BD05L
GRM0335C1H8R0BD01D
GRM1555C1H8R0BA01D
±0.25pF(C)
GRM0225C1C8R0CD05L
GRM0335C1H8R0CD01D
GRM1555C1H8R0CA01D
±0.5pF(D)
GRM0225C1C8R0DD05L
GRM0335C1H8R0DD01D
GRM1555C1H8R0DA01D
±0.05pF(W)
GRM0225C1C8R1WD05L
GRM0335C1H8R1WD01D
GRM1555C1H8R1WA01D
±0.1pF(B)
GRM0225C1C8R1BD05L
GRM0335C1H8R1BD01D
GRM1555C1H8R1BA01D
±0.25pF(C)
GRM0225C1C8R1CD05L
GRM0335C1H8R1CD01D
GRM1555C1H8R1CA01D
±0.5pF(D)
GRM0225C1C8R1DD05L
GRM0335C1H8R1DD01D
GRM1555C1H8R1DA01D
±0.05pF(W)
GRM0225C1C8R2WD05L
GRM0335C1H8R2WD01D
GRM1555C1H8R2WA01D
±0.1pF(B)
GRM0225C1C8R2BD05L
GRM0335C1H8R2BD01D
GRM1555C1H8R2BA01D
±0.25pF(C)
GRM0225C1C8R2CD05L
GRM0335C1H8R2CD01D
GRM1555C1H8R2CA01D
±0.5pF(D)
GRM0225C1C8R2DD05L
GRM0335C1H8R2DD01D
GRM1555C1H8R2DA01D
±0.05pF(W)
GRM0225C1C8R3WD05L
GRM0335C1H8R3WD01D
GRM1555C1H8R3WA01D
±0.1pF(B)
GRM0225C1C8R3BD05L
GRM0335C1H8R3BD01D
GRM1555C1H8R3BA01D
±0.25pF(C)
GRM0225C1C8R3CD05L
GRM0335C1H8R3CD01D
GRM1555C1H8R3CA01D
±0.5pF(D)
GRM0225C1C8R3DD05L
GRM0335C1H8R3DD01D
GRM1555C1H8R3DA01D
±0.05pF(W)
GRM0225C1C8R4WD05L
GRM0335C1H8R4WD01D
GRM1555C1H8R4WA01D
±0.1pF(B)
GRM0225C1C8R4BD05L
GRM0335C1H8R4BD01D
GRM1555C1H8R4BA01D
±0.25pF(C)
GRM0225C1C8R4CD05L
GRM0335C1H8R4CD01D
GRM1555C1H8R4CA01D
±0.5pF(D)
GRM0225C1C8R4DD05L
GRM0335C1H8R4DD01D
GRM1555C1H8R4DA01D
±0.05pF(W)
GRM0225C1C8R5WD05L
GRM0335C1H8R5WD01D
GRM1555C1H8R5WA01D
±0.1pF(B)
GRM0225C1C8R5BD05L
GRM0335C1H8R5BD01D
GRM1555C1H8R5BA01D
±0.25pF(C)
GRM0225C1C8R5CD05L
GRM0335C1H8R5CD01D
GRM1555C1H8R5CA01D
±0.5pF(D)
GRM0225C1C8R5DD05L
GRM0335C1H8R5DD01D
GRM1555C1H8R5DA01D
±0.05pF(W)
GRM0225C1C8R6WD05L
GRM0335C1H8R6WD01D
GRM1555C1H8R6WA01D
±0.1pF(B)
GRM0225C1C8R6BD05L
GRM0335C1H8R6BD01D
GRM1555C1H8R6BA01D
±0.25pF(C)
GRM0225C1C8R6CD05L
GRM0335C1H8R6CD01D
GRM1555C1H8R6CA01D
±0.5pF(D)
GRM0225C1C8R6DD05L
GRM0335C1H8R6DD01D
GRM1555C1H8R6DA01D
±0.05pF(W)
GRM0225C1C8R7WD05L
GRM0335C1H8R7WD01D
GRM1555C1H8R7WA01D
±0.1pF(B)
GRM0225C1C8R7BD05L
GRM0335C1H8R7BD01D
GRM1555C1H8R7BA01D
±0.25pF(C)
GRM0225C1C8R7CD05L
GRM0335C1H8R7CD01D
GRM1555C1H8R7CA01D
±0.5pF(D)
GRM0225C1C8R7DD05L
GRM0335C1H8R7DD01D
GRM1555C1H8R7DA01D
±0.05pF(W)
GRM0225C1C8R8WD05L
GRM0335C1H8R8WD01D
GRM1555C1H8R8WA01D
±0.1pF(B)
GRM0225C1C8R8BD05L
GRM0335C1H8R8BD01D
GRM1555C1H8R8BA01D
±0.25pF(C)
GRM0225C1C8R8CD05L
GRM0335C1H8R8CD01D
GRM1555C1H8R8CA01D
±0.5pF(D)
GRM0225C1C8R8DD05L
GRM0335C1H8R8DD01D
GRM1555C1H8R8DA01D
±0.05pF(W)
GRM0225C1C8R9WD05L
GRM0335C1H8R9WD01D
GRM1555C1H8R9WA01D
±0.1pF(B)
GRM0225C1C8R9BD05L
GRM0335C1H8R9BD01D
GRM1555C1H8R9BA01D
±0.25pF(C)
GRM0225C1C8R9CD05L
GRM0335C1H8R9CD01D
GRM1555C1H8R9CA01D
±0.5pF(D)
GRM0225C1C8R9DD05L
GRM0335C1H8R9DD01D
GRM1555C1H8R9DA01D
±0.05pF(W)
GRM0225C1C9R0WD05L
GRM0335C1H9R0WD01D
GRM1555C1H9R0WA01D
±0.1pF(B)
GRM0225C1C9R0BD05L
GRM0335C1H9R0BD01D
GRM1555C1H9R0BA01D
±0.25pF(C)
GRM0225C1C9R0CD05L
GRM0335C1H9R0CD01D
GRM1555C1H9R0CA01D
±0.5pF(D)
GRM0225C1C9R0DD05L
GRM0335C1H9R0DD01D
GRM1555C1H9R0DA01D
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
21
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
Temperature Compensating Type C0G(5C) Characteristics
LxW [mm]
0.4x0.2(02)<01005>
0.6x0.3(03)<0201>
1.0x0.5(15)<0402>
16(1C)
50(1H)
50(1H)
Rated Volt. [Vdc]
Capacitance
Tolerance
9.1pF(9R1)
9.2pF(9R2)
9.3pF(9R3)
9.4pF(9R4)
9.5pF(9R5)
9.6pF(9R6)
9.7pF(9R7)
9.8pF(9R8)
9.9pF(9R9)
Part Number
±0.05pF(W)
GRM0225C1C9R1WD05L
GRM0335C1H9R1WD01D
GRM1555C1H9R1WA01D
±0.1pF(B)
GRM0225C1C9R1BD05L
GRM0335C1H9R1BD01D
GRM1555C1H9R1BA01D
±0.25pF(C)
GRM0225C1C9R1CD05L
GRM0335C1H9R1CD01D
GRM1555C1H9R1CA01D
±0.5pF(D)
GRM0225C1C9R1DD05L
GRM0335C1H9R1DD01D
GRM1555C1H9R1DA01D
±0.05pF(W)
GRM0225C1C9R2WD05L
GRM0335C1H9R2WD01D
GRM1555C1H9R2WA01D
±0.1pF(B)
GRM0225C1C9R2BD05L
GRM0335C1H9R2BD01D
GRM1555C1H9R2BA01D
±0.25pF(C)
GRM0225C1C9R2CD05L
GRM0335C1H9R2CD01D
GRM1555C1H9R2CA01D
±0.5pF(D)
GRM0225C1C9R2DD05L
GRM0335C1H9R2DD01D
GRM1555C1H9R2DA01D
±0.05pF(W)
GRM0225C1C9R3WD05L
GRM0335C1H9R3WD01D
GRM1555C1H9R3WA01D
±0.1pF(B)
GRM0225C1C9R3BD05L
GRM0335C1H9R3BD01D
GRM1555C1H9R3BA01D
±0.25pF(C)
GRM0225C1C9R3CD05L
GRM0335C1H9R3CD01D
GRM1555C1H9R3CA01D
±0.5pF(D)
GRM0225C1C9R3DD05L
GRM0335C1H9R3DD01D
GRM1555C1H9R3DA01D
±0.05pF(W)
GRM0225C1C9R4WD05L
GRM0335C1H9R4WD01D
GRM1555C1H9R4WA01D
±0.1pF(B)
GRM0225C1C9R4BD05L
GRM0335C1H9R4BD01D
GRM1555C1H9R4BA01D
±0.25pF(C)
GRM0225C1C9R4CD05L
GRM0335C1H9R4CD01D
GRM1555C1H9R4CA01D
±0.5pF(D)
GRM0225C1C9R4DD05L
GRM0335C1H9R4DD01D
GRM1555C1H9R4DA01D
±0.05pF(W)
GRM0225C1C9R5WD05L
GRM0335C1H9R5WD01D
GRM1555C1H9R5WA01D
±0.1pF(B)
GRM0225C1C9R5BD05L
GRM0335C1H9R5BD01D
GRM1555C1H9R5BA01D
±0.25pF(C)
GRM0225C1C9R5CD05L
GRM0335C1H9R5CD01D
GRM1555C1H9R5CA01D
±0.5pF(D)
GRM0225C1C9R5DD05L
GRM0335C1H9R5DD01D
GRM1555C1H9R5DA01D
±0.05pF(W)
GRM0225C1C9R6WD05L
GRM0335C1H9R6WD01D
GRM1555C1H9R6WA01D
±0.1pF(B)
GRM0225C1C9R6BD05L
GRM0335C1H9R6BD01D
GRM1555C1H9R6BA01D
±0.25pF(C)
GRM0225C1C9R6CD05L
GRM0335C1H9R6CD01D
GRM1555C1H9R6CA01D
±0.5pF(D)
GRM0225C1C9R6DD05L
GRM0335C1H9R6DD01D
GRM1555C1H9R6DA01D
±0.05pF(W)
GRM0225C1C9R7WD05L
GRM0335C1H9R7WD01D
GRM1555C1H9R7WA01D
±0.1pF(B)
GRM0225C1C9R7BD05L
GRM0335C1H9R7BD01D
GRM1555C1H9R7BA01D
±0.25pF(C)
GRM0225C1C9R7CD05L
GRM0335C1H9R7CD01D
GRM1555C1H9R7CA01D
±0.5pF(D)
GRM0225C1C9R7DD05L
GRM0335C1H9R7DD01D
GRM1555C1H9R7DA01D
±0.05pF(W)
GRM0225C1C9R8WD05L
GRM0335C1H9R8WD01D
GRM1555C1H9R8WA01D
±0.1pF(B)
GRM0225C1C9R8BD05L
GRM0335C1H9R8BD01D
GRM1555C1H9R8BA01D
±0.25pF(C)
GRM0225C1C9R8CD05L
GRM0335C1H9R8CD01D
GRM1555C1H9R8CA01D
±0.5pF(D)
GRM0225C1C9R8DD05L
GRM0335C1H9R8DD01D
GRM1555C1H9R8DA01D
±0.05pF(W)
GRM0225C1C9R9WD05L
GRM0335C1H9R9WD01D
GRM1555C1H9R9WA01D
±0.1pF(B)
GRM0225C1C9R9BD05L
GRM0335C1H9R9BD01D
GRM1555C1H9R9BA01D
±0.25pF(C)
GRM0225C1C9R9CD05L
GRM0335C1H9R9CD01D
GRM1555C1H9R9CA01D
±0.5pF(D)
GRM0225C1C9R9DD05L
GRM0335C1H9R9DD01D
GRM1555C1H9R9DA01D
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
qProduct ID
wSeries
tTemperature Characteristics
u i o !0 iCapacitance Tolerance
q w e r t y
Packaging Code in Part Number is a code shows STD 180mm Reel Taping.
(Part Number) GR
22
M
02
2
5C 1C
9R1 W
D05 L
eDimension (LxW)
rDimension (T)
yRated Voltage
uCapacitance
oIndividual Specification Code !0Packaging*
*GRM022: D is applicable.
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
Temperature Compensating Type C0G(5C) Characteristics
0.4x0.2(02)<01005>
LxW [mm]
16(1C)
Rated Volt. [Vdc]
Capacitance
0.6x0.3(03)<0201>
10(1A)
Tolerance
6.3(0J)
50(1H)
Part Number
±2%(G)
GRM0225C1C100GD05L
±5%(J)
GRM0225C1C100JD05L
GRM0335C1H100JD01D
12pF(120)
±2%(G)
GRM0225C1C120GD05L
GRM0335C1H120GD01D
±5%(J)
GRM0225C1C120JD05L
GRM0335C1H120JD01D
15pF(150)
±2%(G)
GRM0225C1C150GD05L
GRM0335C1H150GD01D
±5%(J)
GRM0225C1C150JD05L
GRM0335C1H150JD01D
18pF(180)
±2%(G)
GRM0225C1C180GD05L
GRM0335C1H180GD01D
±5%(J)
GRM0225C1C180JD05L
GRM0335C1H180JD01D
22pF(220)
±2%(G)
GRM0225C1C220GD05L
GRM0335C1H220GD01D
±5%(J)
GRM0225C1C220JD05L
GRM0335C1H220JD01D
±2%(G)
GRM0225C1C270GD05L
GRM0335C1H270GD01D
±5%(J)
GRM0225C1C270JD05L
GRM0335C1H270JD01D
33pF(330)
±2%(G)
GRM0225C1C330GD05L
GRM0335C1H330GD01D
±5%(J)
GRM0225C1C330JD05L
GRM0335C1H330JD01D
39pF(390)
±2%(G)
GRM0225C1C390GD05L
GRM0335C1H390GD01D
±5%(J)
GRM0225C1C390JD05L
GRM0335C1H390JD01D
±2%(G)
GRM0225C1C470GD05L
GRM0335C1H470GD01D
±5%(J)
GRM0225C1C470JD05L
10pF(100)
27pF(270)
47pF(470)
GRM0335C1H100GD01D
GRM0335C1H470JD01D
56pF(560)
±2%(G)
±5%(J)
GRM0225C1A560JD05L
GRM0225C0J560JD05L
GRM0335C1H560JD01D
68pF(680)
±2%(G)
GRM0225C1A680GD05L
GRM0225C0J680GD05L
GRM0335C1H680GD01D
±5%(J)
GRM0225C1A680JD05L
GRM0225C0J680JD05L
GRM0335C1H680JD01D
82pF(820)
±2%(G)
GRM0225C1A820GD05L
GRM0225C0J820GD05L
GRM0335C1H820GD01D
±5%(J)
GRM0225C1A820JD05L
GRM0225C0J820JD05L
GRM0335C1H820JD01D
100pF(101)
±2%(G)
GRM0225C1A101GD05L
GRM0225C0J101GD05L
GRM0335C1H101GD01D
±5%(J)
GRM0225C1A101JD05L
GRM0225C0J101JD05L
GRM0335C1H101JD01D
The part number code is shown in ( ) and Unit is shown in [ ].
GRM0225C1A560GD05L
GRM0225C0J560GD05L
GRM0335C1H560GD01D
< >: EIA [inch] Code
23
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
Temperature Compensating Type C0G(5C) Characteristics
1.0x0.5(15)<0402>
LxW [mm]
50(1H)
Rated Volt. [Vdc]
C0G(5C)
TC
Capacitance
Tolerance
Part Number
10pF(100)
±2%(G)
±5%(J)
GRM1555C1H100JA01D
12pF(120)
±2%(G)
GRM1555C1H120GA01D
±5%(J)
GRM1555C1H120JA01D
15pF(150)
±2%(G)
GRM1555C1H150GA01D
±5%(J)
GRM1555C1H150JA01D
18pF(180)
±2%(G)
GRM1555C1H180GA01D
±5%(J)
GRM1555C1H180JA01D
22pF(220)
±2%(G)
GRM1555C1H220GA01D
±5%(J)
GRM1555C1H220JA01D
27pF(270)
±2%(G)
GRM1555C1H270GA01D
±5%(J)
GRM1555C1H270JA01D
33pF(330)
±2%(G)
GRM1555C1H330GA01D
GRM1555C1H100GA01D
±5%(J)
GRM1555C1H330JA01D
39pF(390)
±2%(G)
GRM1555C1H390GA01D
±5%(J)
GRM1555C1H390JA01D
47pF(470)
±2%(G)
GRM1555C1H470GA01D
±5%(J)
GRM1555C1H470JA01D
56pF(560)
±2%(G)
GRM1555C1H560GA01D
±5%(J)
GRM1555C1H560JA01D
68pF(680)
±2%(G)
GRM1555C1H680GA01D
±5%(J)
GRM1555C1H680JA01D
82pF(820)
±2%(G)
GRM1555C1H820GA01D
±5%(J)
GRM1555C1H820JA01D
100pF(101)
±2%(G)
GRM1555C1H101GA01D
±5%(J)
GRM1555C1H101JA01D
120pF(121)
±2%(G)
GRM1555C1H121GA01D
±5%(J)
GRM1555C1H121JA01D
150pF(151)
±2%(G)
GRM1555C1H151GA01D
±5%(J)
GRM1555C1H151JA01D
180pF(181)
±2%(G)
GRM1555C1H181GA01D
±5%(J)
GRM1555C1H181JA01D
220pF(221)
±2%(G)
GRM1555C1H221GA01D
±5%(J)
GRM1555C1H221JA01D
270pF(271)
±2%(G)
GRM1555C1H271GA01D
±5%(J)
GRM1555C1H271JA01D
330pF(331)
±2%(G)
GRM1555C1H331GA01D
±5%(J)
GRM1555C1H331JA01D
390pF(391)
±2%(G)
GRM1555C1H391GA01D
±5%(J)
GRM1555C1H391JA01D
470pF(471)
±2%(G)
GRM1555C1H471GA01D
±5%(J)
GRM1555C1H471JA01D
560pF(561)
±2%(G)
GRM1555C1H561GA01D
±5%(J)
GRM1555C1H561JA01D
±2%(G)
GRM1555C1H681GA01D
680pF(681)
±5%(J)
GRM1555C1H681JA01D
820pF(821)
±2%(G)
GRM1555C1H821GA01D
±5%(J)
GRM1555C1H821JA01D
1000pF(102)
±2%(G)
GRM1555C1H102GA01D
±5%(J)
GRM1555C1H102JA01D
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
qProduct ID
wSeries
tTemperature Characteristics
u i o !0 iCapacitance Tolerance
q w e r t y
Packaging Code in Part Number is a code shows STD 180mm Reel Taping.
(Part Number) GR
24
M
15
5
5C 1H
100
G
Z01 D
eDimension (LxW)
yRated Voltage
oIndividual Specification Code
rDimension (T)
uCapacitance
!0Packaging
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
Temperature Compensating Type C0G(5C) Characteristics
1.6x0.8(18)<0603>
LxW [mm]
100(2A)
Rated Volt. [Vdc]
Capacitance
Tolerance
50(1H)
Part Number
10pF(100)
±5%(J)
GRM1885C2A100JA01D
GRM1885C1H100JA01D
12pF(120)
±5%(J)
GRM1885C2A120JA01D
GRM1885C1H120JA01D
15pF(150)
±5%(J)
GRM1885C2A150JA01D
GRM1885C1H150JA01D
18pF(180)
±5%(J)
GRM1885C2A180JA01D
GRM1885C1H180JA01D
22pF(220)
±5%(J)
GRM1885C2A220JA01D
GRM1885C1H220JA01D
27pF(270)
±5%(J)
GRM1885C2A270JA01D
GRM1885C1H270JA01D
33pF(330)
±5%(J)
GRM1885C2A330JA01D
GRM1885C1H330JA01D
39pF(390)
±5%(J)
GRM1885C2A390JA01D
GRM1885C1H390JA01D
47pF(470)
±5%(J)
GRM1885C2A470JA01D
GRM1885C1H470JA01D
56pF(560)
±5%(J)
GRM1885C2A560JA01D
GRM1885C1H560JA01D
68pF(680)
±5%(J)
GRM1885C2A680JA01D
GRM1885C1H680JA01D
82pF(820)
±5%(J)
GRM1885C2A820JA01D
GRM1885C1H820JA01D
100pF(101)
±5%(J)
GRM1885C2A101JA01D
GRM1885C1H101JA01D
120pF(121)
±5%(J)
GRM1885C2A121JA01D
GRM1885C1H121JA01D
150pF(151)
±5%(J)
GRM1885C2A151JA01D
GRM1885C1H151JA01D
180pF(181)
±5%(J)
GRM1885C2A181JA01D
GRM1885C1H181JA01D
220pF(221)
±5%(J)
GRM1885C2A221JA01D
GRM1885C1H221JA01D
270pF(271)
±5%(J)
GRM1885C2A271JA01D
GRM1885C1H271JA01D
330pF(331)
±5%(J)
GRM1885C2A331JA01D
GRM1885C1H331JA01D
390pF(391)
±5%(J)
GRM1885C2A391JA01D
GRM1885C1H391JA01D
470pF(471)
±5%(J)
GRM1885C2A471JA01D
GRM1885C1H471JA01D
560pF(561)
±5%(J)
GRM1885C2A561JA01D
GRM1885C1H561JA01D
680pF(681)
±5%(J)
GRM1885C2A681JA01D
GRM1885C1H681JA01D
820pF(821)
±5%(J)
GRM1885C2A821JA01D
GRM1885C1H821JA01D
1000pF(102)
±5%(J)
GRM1885C2A102JA01D
GRM1885C1H102JA01D
1200pF(122)
±5%(J)
GRM1885C2A122JA01D
GRM1885C1H122JA01D
1500pF(152)
±5%(J)
GRM1885C2A152JA01D
GRM1885C1H152JA01D
1800pF(182)
±5%(J)
GRM1885C1H182JA01D
2200pF(222)
±5%(J)
GRM1885C1H222JA01D
2700pF(272)
±5%(J)
GRM1885C1H272JA01D
3300pF(332)
±5%(J)
GRM1885C1H332JA01D
3900pF(392)
±5%(J)
GRM1885C1H392JA01D
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
25
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
Temperature Compensating Type C0G(5C) Characteristics
2.0x1.25(21)<0805>
LxW [mm]
100(2A)
Rated Volt. [Vdc]
Capacitance
3.2x1.6(31)<1206>
50(1H)
Tolerance
100(2A)
50(1H)
Part Number
100pF(101)
±5%(J)
GRM2165C2A101JA01D
120pF(121)
±5%(J)
GRM2165C2A121JA01D
150pF(151)
±5%(J)
GRM2165C2A151JA01D
180pF(181)
±5%(J)
GRM2165C2A181JA01D
220pF(221)
±5%(J)
GRM2165C2A221JA01D
270pF(271)
±5%(J)
GRM2165C2A271JA01D
330pF(331)
±5%(J)
GRM2165C2A331JA01D
390pF(391)
±5%(J)
GRM2165C2A391JA01D
470pF(471)
±5%(J)
GRM2165C2A471JA01D
560pF(561)
±5%(J)
GRM2165C2A561JA01D
680pF(681)
±5%(J)
GRM2165C2A681JA01D
820pF(821)
±5%(J)
GRM2165C2A821JA01D
1000pF(102)
±5%(J)
GRM2165C2A102JA01D
1200pF(122)
±5%(J)
GRM2165C2A122JA01D
GRM2165C1H122JA01D
1500pF(152)
±5%(J)
GRM2165C2A152JA01D
GRM2165C1H152JA01D
1800pF(182)
±5%(J)
GRM2165C2A182JA01D
GRM2165C1H182JA01D
GRM3195C2A182JA01D
2200pF(222)
±5%(J)
GRM2165C2A222JA01D
GRM2165C1H222JA01D
GRM3195C2A222JA01D
2700pF(272)
±5%(J)
GRM2165C2A272JA01D
GRM2165C1H272JA01D
GRM3195C2A272JA01D
3300pF(332)
±5%(J)
GRM2165C2A332JA01D
GRM2165C1H332JA01D
GRM3195C2A332JA01D
3900pF(392)
±5%(J)
GRM2165C1H392JA01D
GRM3195C2A392JA01D
4700pF(472)
±5%(J)
GRM2165C1H472JA01D
GRM3195C2A472JA01D
GRM3195C1H472JA01D
5600pF(562)
±5%(J)
GRM2195C1H562JA01D
GRM3195C2A562JA01D
GRM3195C1H562JA01D
6800pF(682)
±5%(J)
GRM2195C1H682JA01D
GRM3195C2A682JA01D
GRM3195C1H682JA01D
8200pF(822)
±5%(J)
GRM2195C1H822JA01D
GRM3195C2A822JA01D
GRM3195C1H822JA01D
10000pF(103)
±5%(J)
GRM2195C1H103JA01D
GRM3195C2A103JA01D
GRM3195C1H103JA01D
12000pF(123)
±5%(J)
GRM2195C1H123JA01D
GRM3195C1H123JA01D
15000pF(153)
±5%(J)
GRM2195C1H153JA01D
GRM3195C1H153JA01D
18000pF(183)
±5%(J)
GRM21B5C1H183JA01L
GRM3195C1H183JA01D
22000pF(223)
±5%(J)
GRM21B5C1H223JA01L
GRM3195C1H223JA01D
27000pF(273)
±5%(J)
GRM3195C1H273JA01D
33000pF(333)
±5%(J)
GRM3195C1H333JA01D
39000pF(393)
±5%(J)
GRM3195C1H393JA01D
47000pF(473)
±5%(J)
GRM31M5C1H473JA01L
56000pF(563)
±5%(J)
GRM31M5C1H563JA01L
68000pF(683)
±5%(J)
GRM31C5C1H683JA01L
82000pF(823)
±5%(J)
GRM31C5C1H823JA01L
100000pF(104)
±5%(J)
GRM31C5C1H104JA01L
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
qProduct ID
wSeries
tTemperature Characteristics
u i o !0 iCapacitance Tolerance
q w e r t y
Packaging Code in Part Number is a code shows STD 180mm Reel Taping.
(Part Number) GR
26
M
21
6
5C 2A
101
J
A01 D
eDimension (LxW)
yRated Voltage
oIndividual Specification Code
rDimension (T)
uCapacitance
!0Packaging
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
Temperature Compensating Type C0G(5C) Characteristics Low Profile
1.0x0.5(15)<0402>
LxW [mm]
50(1H)
Rated Volt. [Vdc]
Capacitance
Tolerance
1.0x0.5(15)<0402>
LxW [mm]
50(1H)
Rated Volt. [Vdc]
Part Number
Capacitance
Tolerance
Part Number
0.1pF(R10)
±0.1pF(B)
GRM1535C1HR10BDD5D
5.1pF(5R1)
±0.5pF(D)
GRM1535C1H5R1DDD5D
0.2pF(R20)
±0.1pF(B)
GRM1535C1HR20BDD5D
5.2pF(5R2)
±0.5pF(D)
GRM1535C1H5R2DDD5D
0.3pF(R30)
±0.1pF(B)
GRM1535C1HR30BDD5D
5.3pF(5R3)
±0.5pF(D)
GRM1535C1H5R3DDD5D
0.4pF(R40)
±0.1pF(B)
GRM1535C1HR40BDD5D
5.4pF(5R4)
±0.5pF(D)
GRM1535C1H5R4DDD5D
0.5pF(R50)
±0.1pF(B)
GRM1535C1HR50BDD5D
5.5pF(5R5)
±0.5pF(D)
GRM1535C1H5R5DDD5D
0.6pF(R60)
±0.1pF(B)
GRM1535C1HR60BDD5D
5.6pF(5R6)
±0.5pF(D)
GRM1535C1H5R6DDD5D
0.7pF(R70)
±0.1pF(B)
GRM1535C1HR70BDD5D
5.7pF(5R7)
±0.5pF(D)
GRM1535C1H5R7DDD5D
0.8pF(R80)
±0.1pF(B)
GRM1535C1HR80BDD5D
5.8pF(5R8)
±0.5pF(D)
GRM1535C1H5R8DDD5D
0.9pF(R90)
±0.1pF(B)
GRM1535C1HR90BDD5D
5.9pF(5R9)
±0.5pF(D)
GRM1535C1H5R9DDD5D
1.0pF(1R0)
±0.25pF(C)
GRM1535C1H1R0CDD5D
6.0pF(6R0)
±0.5pF(D)
GRM1535C1H6R0DDD5D
1.1pF(1R1)
±0.25pF(C)
GRM1535C1H1R1CDD5D
6.1pF(6R1)
±0.5pF(D)
GRM1535C1H6R1DDD5D
1.2pF(1R2)
±0.25pF(C)
GRM1535C1H1R2CDD5D
6.2pF(6R2)
±0.5pF(D)
GRM1535C1H6R2DDD5D
1.3pF(1R3)
±0.25pF(C)
GRM1535C1H1R3CDD5D
6.3pF(6R3)
±0.5pF(D)
GRM1535C1H6R3DDD5D
1.4pF(1R4)
±0.25pF(C)
GRM1535C1H1R4CDD5D
6.4pF(6R4)
±0.5pF(D)
GRM1535C1H6R4DDD5D
1.5pF(1R5)
±0.25pF(C)
GRM1535C1H1R5CDD5D
6.5pF(6R5)
±0.5pF(D)
GRM1535C1H6R5DDD5D
1.6pF(1R6)
±0.25pF(C)
GRM1535C1H1R6CDD5D
6.6pF(6R6)
±0.5pF(D)
GRM1535C1H6R6DDD5D
1.7pF(1R7)
±0.25pF(C)
GRM1535C1H1R7CDD5D
6.7pF(6R7)
±0.5pF(D)
GRM1535C1H6R7DDD5D
1.8pF(1R8)
±0.25pF(C)
GRM1535C1H1R8CDD5D
6.8pF(6R8)
±0.5pF(D)
GRM1535C1H6R8DDD5D
1.9pF(1R9)
±0.25pF(C)
GRM1535C1H1R9CDD5D
6.9pF(6R9)
±0.5pF(D)
GRM1535C1H6R9DDD5D
2.0pF(2R0)
±0.25pF(C)
GRM1535C1H2R0CDD5D
7.0pF(7R0)
±0.5pF(D)
GRM1535C1H7R0DDD5D
2.1pF(2R1)
±0.25pF(C)
GRM1535C1H2R1CDD5D
7.1pF(7R1)
±0.5pF(D)
GRM1535C1H7R1DDD5D
2.2pF(2R2)
±0.25pF(C)
GRM1535C1H2R2CDD5D
7.2pF(7R2)
±0.5pF(D)
GRM1535C1H7R2DDD5D
2.3pF(2R3)
±0.25pF(C)
GRM1535C1H2R3CDD5D
7.3pF(7R3)
±0.5pF(D)
GRM1535C1H7R3DDD5D
2.4pF(2R4)
±0.25pF(C)
GRM1535C1H2R4CDD5D
7.4pF(7R4)
±0.5pF(D)
GRM1535C1H7R4DDD5D
2.5pF(2R5)
±0.25pF(C)
GRM1535C1H2R5CDD5D
7.5pF(7R5)
±0.5pF(D)
GRM1535C1H7R5DDD5D
2.6pF(2R6)
±0.25pF(C)
GRM1535C1H2R6CDD5D
7.6pF(7R6)
±0.5pF(D)
GRM1535C1H7R6DDD5D
2.7pF(2R7)
±0.25pF(C)
GRM1535C1H2R7CDD5D
7.7pF(7R7)
±0.5pF(D)
GRM1535C1H7R7DDD5D
2.8pF(2R8)
±0.25pF(C)
GRM1535C1H2R8CDD5D
7.8pF(7R8)
±0.5pF(D)
GRM1535C1H7R8DDD5D
2.9pF(2R9)
±0.25pF(C)
GRM1535C1H2R9CDD5D
7.9pF(7R9)
±0.5pF(D)
GRM1535C1H7R9DDD5D
3.0pF(3R0)
±0.25pF(C)
GRM1535C1H3R0CDD5D
8.0pF(8R0)
±0.5pF(D)
GRM1535C1H8R0DDD5D
3.1pF(3R1)
±0.25pF(C)
GRM1535C1H3R1CDD5D
8.1pF(8R1)
±0.5pF(D)
GRM1535C1H8R1DDD5D
3.2pF(3R2)
±0.25pF(C)
GRM1535C1H3R2CDD5D
8.2pF(8R2)
±0.5pF(D)
GRM1535C1H8R2DDD5D
3.3pF(3R3)
±0.25pF(C)
GRM1535C1H3R3CDD5D
8.3pF(8R3)
±0.5pF(D)
GRM1535C1H8R3DDD5D
3.4pF(3R4)
±0.25pF(C)
GRM1535C1H3R4CDD5D
8.4pF(8R4)
±0.5pF(D)
GRM1535C1H8R4DDD5D
3.5pF(3R5)
±0.25pF(C)
GRM1535C1H3R5CDD5D
8.5pF(8R5)
±0.5pF(D)
GRM1535C1H8R5DDD5D
3.6pF(3R6)
±0.25pF(C)
GRM1535C1H3R6CDD5D
8.6pF(8R6)
±0.5pF(D)
GRM1535C1H8R6DDD5D
3.7pF(3R7)
±0.25pF(C)
GRM1535C1H3R7CDD5D
8.7pF(8R7)
±0.5pF(D)
GRM1535C1H8R7DDD5D
3.8pF(3R8)
±0.25pF(C)
GRM1535C1H3R8CDD5D
8.8pF(8R8)
±0.5pF(D)
GRM1535C1H8R8DDD5D
3.9pF(3R9)
±0.25pF(C)
GRM1535C1H3R9CDD5D
8.9pF(8R9)
±0.5pF(D)
GRM1535C1H8R9DDD5D
4.0pF(4R0)
±0.25pF(C)
GRM1535C1H4R0CDD5D
9.0pF(9R0)
±0.5pF(D)
GRM1535C1H9R0DDD5D
4.1pF(4R1)
±0.25pF(C)
GRM1535C1H4R1CDD5D
9.1pF(9R1)
±0.5pF(D)
GRM1535C1H9R1DDD5D
4.2pF(4R2)
±0.25pF(C)
GRM1535C1H4R2CDD5D
9.2pF(9R2)
±0.5pF(D)
GRM1535C1H9R2DDD5D
4.3pF(4R3)
±0.25pF(C)
GRM1535C1H4R3CDD5D
9.3pF(9R3)
±0.5pF(D)
GRM1535C1H9R3DDD5D
4.4pF(4R4)
±0.25pF(C)
GRM1535C1H4R4CDD5D
9.4pF(9R4)
±0.5pF(D)
GRM1535C1H9R4DDD5D
4.5pF(4R5)
±0.25pF(C)
GRM1535C1H4R5CDD5D
9.5pF(9R5)
±0.5pF(D)
GRM1535C1H9R5DDD5D
4.6pF(4R6)
±0.25pF(C)
GRM1535C1H4R6CDD5D
9.6pF(9R6)
±0.5pF(D)
GRM1535C1H9R6DDD5D
4.7pF(4R7)
±0.25pF(C)
GRM1535C1H4R7CDD5D
9.7pF(9R7)
±0.5pF(D)
GRM1535C1H9R7DDD5D
4.8pF(4R8)
±0.25pF(C)
GRM1535C1H4R8CDD5D
9.8pF(9R8)
±0.5pF(D)
GRM1535C1H9R8DDD5D
4.9pF(4R9)
±0.25pF(C)
GRM1535C1H4R9CDD5D
9.9pF(9R9)
±0.5pF(D)
GRM1535C1H9R9DDD5D
5.0pF(5R0)
±0.25pF(C)
GRM1535C1H5R0CDD5D
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
27
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
Temperature Compensating Type C0G(5C) Characteristics Low Profile
1.0x0.5(15)<0402>
LxW [mm]
50(1H)
Rated Volt. [Vdc]
Capacitance
Tolerance
Part Number
10pF(100)
±5%(J)
GRM1535C1H100JDD5D
12pF(120)
±5%(J)
GRM1535C1H120JDD5D
15pF(150)
±5%(J)
GRM1535C1H150JDD5D
18pF(180)
±5%(J)
GRM1535C1H180JDD5D
22pF(220)
±5%(J)
GRM1535C1H220JDD5D
27pF(270)
±5%(J)
GRM1535C1H270JDD5D
33pF(330)
±5%(J)
GRM1535C1H330JDD5D
39pF(390)
±5%(J)
GRM1535C1H390JDD5D
47pF(470)
±5%(J)
GRM1535C1H470JDD5D
56pF(560)
±5%(J)
GRM1535C1H560JDD5D
68pF(680)
±5%(J)
GRM1535C1H680JDD5D
82pF(820)
±5%(J)
GRM1535C1H820JDD5D
100pF(101)
±5%(J)
GRM1535C1H101JDD5D
120pF(121)
±5%(J)
GRM1535C1H121JDD5D
150pF(151)
±5%(J)
GRM1535C1H151JDD5D
180pF(181)
±5%(J)
GRM1535C1H181JDD5D
220pF(221)
±5%(J)
GRM1535C1H221JDD5D
270pF(271)
±5%(J)
GRM1535C1H271JDD5D
330pF(331)
±5%(J)
GRM1535C1H331JDD5D
390pF(391)
±5%(J)
GRM1535C1H391JDD5D
470pF(471)
±5%(J)
GRM1535C1H471JDD5D
560pF(561)
±5%(J)
GRM1535C1H561JDD5D
680pF(681)
±5%(J)
GRM1535C1H681JDD5D
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
qProduct ID
wSeries
tTemperature Characteristics
u i o !0 iCapacitance Tolerance
q w e r t y
Packaging Code in Part Number is a code shows STD 180mm Reel Taping.
(Part Number) GR
28
M
15
3
5C 1H
100
J
DD5 D
eDimension (LxW)
yRated Voltage
oIndividual Specification Code
rDimension (T)
uCapacitance
!0Packaging
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
Temperature Compensating Type C0G(5C) Characteristics Low Profile
2.0x1.25(21)<0805>
LxW [mm]
100(2A)
Rated Volt. [Vdc]
Capacitance
3.2x1.6(31)<1206>
50(1H)
Tolerance
100(2A)
50(1H)
Part Number
100pF(101)
±5%(J)
GRM2165C2A101JA01D
120pF(121)
±5%(J)
GRM2165C2A121JA01D
150pF(151)
±5%(J)
GRM2165C2A151JA01D
180pF(181)
±5%(J)
GRM2165C2A181JA01D
220pF(221)
±5%(J)
GRM2165C2A221JA01D
270pF(271)
±5%(J)
GRM2165C2A271JA01D
330pF(331)
±5%(J)
GRM2165C2A331JA01D
390pF(391)
±5%(J)
GRM2165C2A391JA01D
470pF(471)
±5%(J)
GRM2165C2A471JA01D
560pF(561)
±5%(J)
GRM2165C2A561JA01D
680pF(681)
±5%(J)
GRM2165C2A681JA01D
820pF(821)
±5%(J)
GRM2165C2A821JA01D
1000pF(102)
±5%(J)
GRM2165C2A102JA01D
1200pF(122)
±5%(J)
GRM2165C2A122JA01D
GRM2165C1H122JA01D
1500pF(152)
±5%(J)
GRM2165C2A152JA01D
GRM2165C1H152JA01D
1800pF(182)
±5%(J)
GRM2165C2A182JA01D
GRM2165C1H182JA01D
GRM3195C2A182JA01D
2200pF(222)
±5%(J)
GRM2165C2A222JA01D
GRM2165C1H222JA01D
GRM3195C2A222JA01D
2700pF(272)
±5%(J)
GRM2165C2A272JA01D
GRM2165C1H272JA01D
GRM3195C2A272JA01D
3300pF(332)
±5%(J)
GRM2165C2A332JA01D
GRM2165C1H332JA01D
GRM3195C2A332JA01D
3900pF(392)
±5%(J)
GRM2165C1H392JA01D
GRM3195C2A392JA01D
4700pF(472)
±5%(J)
GRM2165C1H472JA01D
GRM3195C2A472JA01D
GRM3195C1H472JA01D
5600pF(562)
±5%(J)
GRM2195C1H562JA01D
GRM3195C2A562JA01D
GRM3195C1H562JA01D
6800pF(682)
±5%(J)
GRM2195C1H682JA01D
GRM3195C2A682JA01D
GRM3195C1H682JA01D
8200pF(822)
±5%(J)
GRM2195C1H822JA01D
GRM3195C2A822JA01D
GRM3195C1H822JA01D
10000pF(103)
±5%(J)
GRM2195C1H103JA01D
GRM3195C2A103JA01D
GRM3195C1H103JA01D
12000pF(123)
±5%(J)
GRM2195C1H123JA01D
GRM3195C1H123JA01D
15000pF(153)
±5%(J)
GRM2195C1H153JA01D
GRM3195C1H153JA01D
18000pF(183)
±5%(J)
GRM3195C1H183JA01D
22000pF(223)
±5%(J)
GRM3195C1H223JA01D
27000pF(273)
±5%(J)
GRM3195C1H273JA01D
33000pF(333)
±5%(J)
GRM3195C1H333JA01D
39000pF(393)
±5%(J)
GRM3195C1H393JA01D
47000pF(473)
±5%(J)
GRM31M5C1H473JA01L
56000pF(563)
±5%(J)
The part number code is shown in ( ) and Unit is shown in [ ].
GRM31M5C1H563JA01L
< >: EIA [inch] Code
29
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
Temperature Compensating Type U2J(7U) Characteristics
0.6x0.3(03)<0201>
LxW [mm]
50(1H)
Rated Volt. [Vdc]
Capacitance
1.0x0.5(15)<0402>
25(1E)
Tolerance
50(1H)
1.0pF(1R0)
±0.25pF(C)
GRM0337U1H1R0CD01D
GRM1557U1H1R0CZ01D
2.0pF(2R0)
±0.25pF(C)
GRM0337U1H2R0CD01D
GRM1557U1H2R0CZ01D
3.0pF(3R0)
±0.25pF(C)
GRM0337U1H3R0CD01D
GRM1557U1H3R0CZ01D
4.0pF(4R0)
±0.25pF(C)
GRM0337U1H4R0CD01D
GRM1557U1H4R0CZ01D
5.0pF(5R0)
±0.25pF(C)
GRM0337U1H5R0CD01D
GRM1557U1H5R0CZ01D
6.0pF(6R0)
±0.5pF(D)
GRM0337U1H6R0DD01D
GRM1557U1H6R0DZ01D
7.0pF(7R0)
±0.5pF(D)
GRM0337U1H7R0DD01D
GRM1557U1H7R0DZ01D
8.0pF(8R0)
±0.5pF(D)
GRM0337U1H8R0DD01D
GRM1557U1H8R0DZ01D
9.0pF(9R0)
±0.5pF(D)
GRM0337U1H9R0DD01D
GRM1557U1H9R0DZ01D
10pF(100)
±5%(J)
GRM0337U1H100JD01D
GRM1557U1H100JZ01D
12pF(120)
±5%(J)
GRM0337U1H120JD01D
GRM1557U1H120JZ01D
15pF(150)
±5%(J)
GRM0337U1H150JD01D
18pF(180)
±5%(J)
GRM0337U1E180JD01D
GRM1557U1H180JZ01D
22pF(220)
±5%(J)
GRM0337U1E220JD01D
GRM1557U1H220JZ01D
27pF(270)
±5%(J)
GRM0337U1E270JD01D
GRM1557U1H270JZ01D
33pF(330)
±5%(J)
GRM0337U1E330JD01D
GRM1557U1H330JZ01D
39pF(390)
±5%(J)
GRM0337U1E390JD01D
GRM1557U1H390JZ01D
47pF(470)
±5%(J)
GRM0337U1E470JD01D
GRM1557U1H470JZ01D
56pF(560)
±5%(J)
GRM0337U1E560JD01D
GRM1557U1H560JZ01D
68pF(680)
±5%(J)
GRM0337U1E680JD01D
GRM1557U1H680JZ01D
82pF(820)
±5%(J)
GRM0337U1E820JD01D
GRM1557U1H820JZ01D
100pF(101)
±5%(J)
GRM0337U1E101JD01D
GRM1557U1H101JZ01D
120pF(121)
±5%(J)
GRM1557U1H121JZ01D
150pF(151)
±5%(J)
GRM1557U1H151JZ01D
180pF(181)
±5%(J)
GRM1557U1H181JZ01D
1200pF(122)
±5%(J)
GRM1557U1A122JA01D
1500pF(152)
±5%(J)
GRM1557U1A152JA01D
1800pF(182)
±5%(J)
GRM1557U1A182JA01D
2200pF(222)
±5%(J)
GRM1557U1A222JA01D
2700pF(272)
±5%(J)
GRM1557U1A272JA01D
3300pF(332)
±5%(J)
GRM1557U1A332JA01D
3900pF(392)
±5%(J)
GRM1557U1A392JA01D
4700pF(472)
±5%(J)
GRM1557U1H150JZ01D
GRM1557U1A472JA01D
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
qProduct ID
wSeries
tTemperature Characteristics
u i o !0 iCapacitance Tolerance
q w e r t y
Packaging Code in Part Number is a code shows STD 180mm Reel Taping.
(Part Number) GR
30
10(1A)
Part Number
M
03
3
7U 1H
1R0
C
D01 D
eDimension (LxW)
yRated Voltage
oIndividual Specification Code
rDimension (T)
uCapacitance
!0Packaging
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
Temperature Compensating Type U2J(7U) Characteristics
1.6x0.8(18)<0603>
LxW [mm]
50(1H)
Rated Volt. [Vdc]
Capacitance
10(1A)
Tolerance
Part Number
1000pF(102)
±5%(J)
GRM1887U1H102JA01D
1200pF(122)
±5%(J)
GRM1887U1H122JA01D
1500pF(152)
±5%(J)
GRM1887U1H152JA01D
1800pF(182)
±5%(J)
GRM1887U1H182JA01D
2200pF(222)
±5%(J)
GRM1887U1H222JA01D
2700pF(272)
±5%(J)
GRM1887U1H272JA01D
3300pF(332)
±5%(J)
GRM1887U1H332JA01D
3900pF(392)
±5%(J)
GRM1887U1H392JA01D
4700pF(472)
±5%(J)
GRM1887U1H472JA01D
5600pF(562)
±5%(J)
GRM1887U1H562JA01D
6800pF(682)
±5%(J)
GRM1887U1H682JA01D
8200pF(822)
±5%(J)
GRM1887U1H822JA01D
10000pF(103)
±5%(J)
GRM1887U1H103JA01D
12000pF(123)
±5%(J)
GRM1887U1A123JA01D
15000pF(153)
±5%(J)
GRM1887U1A153JA01D
18000pF(183)
±5%(J)
GRM1887U1A183JA01D
22000pF(223)
±5%(J)
GRM1887U1A223JA01D
2.0x1.25(21)<0805>
LxW [mm]
50(1H)
Rated Volt. [Vdc]
Capacitance
3.2x1.6(31)<1206>
10(1A)
Tolerance
50(1H)
Part Number
10000pF(103)
±5%(J)
GRM2167U1H103JA01D
12000pF(123)
±5%(J)
GRM2167U1H123JA01D
15000pF(153)
±5%(J)
GRM2167U1H153JA01D
18000pF(183)
±5%(J)
GRM2167U1H183JA01D
22000pF(223)
±5%(J)
GRM2197U1H223JA01D
27000pF(273)
±5%(J)
GRM2197U1H273JA01D
33000pF(333)
±5%(J)
GRM21A7U1H333JA39L
39000pF(393)
±5%(J)
GRM21B7U1H393JA01L
47000pF(473)
±5%(J)
GRM21B7U1H473JA01L
56000pF(563)
±5%(J)
GRM2197U1A563JA01D
GRM3197U1H563JA01D
68000pF(683)
±5%(J)
GRM21B7U1A683JA01L
GRM31M7U1H683JA01L
82000pF(823)
±5%(J)
GRM21B7U1A823JA01L
GRM31M7U1H823JA01L
100000pF(104)
±5%(J)
GRM21B7U1A104JA01L
GRM31M7U1H104JA01L
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
31
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
Temperature Compensating Type U2J(7U) Characteristics Low Profile
1.6x0.8(18)<0603>
LxW [mm]
50(1H)
Rated Volt. [Vdc]
Capacitance
10(1A)
Tolerance
Part Number
2200pF(222)
±5%(J)
GRM1857U1H222JA44D
2700pF(272)
±5%(J)
GRM1857U1H272JA44D
3300pF(332)
±5%(J)
GRM1857U1H332JA44D
3900pF(392)
±5%(J)
GRM1857U1H392JA44D
4700pF(472)
±5%(J)
GRM1857U1H472JA44D
5600pF(562)
±5%(J)
GRM1857U1A562JA44D
6800pF(682)
±5%(J)
GRM1857U1A682JA44D
8200pF(822)
±5%(J)
GRM1857U1A822JA44D
10000pF(103)
±5%(J)
GRM1857U1A103JA44D
2.0x1.25(21)<0805>
LxW [mm]
50(1H)
Rated Volt. [Vdc]
Capacitance
3.2x1.6(31)<1206>
10(1A)
Tolerance
50(1H)
Part Number
10000pF(103)
±5%(J)
GRM2167U1H103JA01D
12000pF(123)
±5%(J)
GRM2167U1H123JA01D
15000pF(153)
±5%(J)
GRM2167U1H153JA01D
18000pF(183)
±5%(J)
GRM2167U1H183JA01D
22000pF(223)
±5%(J)
GRM2197U1H223JA01D
27000pF(273)
±5%(J)
GRM2197U1H273JA01D
33000pF(333)
±5%(J)
GRM21A7U1H333JA39L
56000pF(563)
±5%(J)
68000pF(683)
±5%(J)
GRM31M7U1H683JA01L
82000pF(823)
±5%(J)
GRM31M7U1H823JA01L
100000pF(104)
±5%(J)
GRM2197U1A563JA01D
GRM3197U1H563JA01D
GRM31M7U1H104JA01L
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
qProduct ID
wSeries
tTemperature Characteristics
u i o !0 iCapacitance Tolerance
q w e r t y
Packaging Code in Part Number is a code shows STD 180mm Reel Taping.
(Part Number) GR
32
M
18
5
7U 1H
222
J
A44 D
eDimension (LxW)
yRated Voltage
oIndividual Specification Code
rDimension (T)
uCapacitance
!0Packaging
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
Temperature Compensating Type P2H(6P) Characteristics
1.0x0.5(15)<0402>
LxW [mm]
50(1H)
Rated Volt. [Vdc]
Capacitance
Tolerance
1.0pF(1R0)
±0.25pF(C)
GRM1556P1H1R0CZ01D
2.0pF(2R0)
±0.25pF(C)
GRM1556P1H2R0CZ01D
3.0pF(3R0)
±0.25pF(C)
GRM1556P1H3R0CZ01D
4.0pF(4R0)
±0.25pF(C)
GRM1556P1H4R0CZ01D
5.0pF(5R0)
±0.25pF(C)
GRM1556P1H5R0CZ01D
6.0pF(6R0)
±0.5pF(D)
GRM1556P1H6R0DZ01D
7.0pF(7R0)
±0.5pF(D)
GRM1556P1H7R0DZ01D
8.0pF(8R0)
±0.5pF(D)
GRM1556P1H8R0DZ01D
9.0pF(9R0)
±0.5pF(D)
GRM1556P1H9R0DZ01D
10pF(100)
±5%(J)
GRM1556P1H100JZ01D
12pF(120)
±5%(J)
GRM1556P1H120JZ01D
15pF(150)
±5%(J)
GRM1556P1H150JZ01D
18pF(180)
±5%(J)
GRM1556P1H180JZ01D
22pF(220)
±5%(J)
GRM1556P1H220JZ01D
27pF(270)
±5%(J)
GRM1556P1H270JZ01D
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
Temperature Compensating Type R2H(6R) Characteristics
LxW [mm]
Rated Volt. [Vdc]
Capacitance
0.6x0.3(03)<0201>
1.0x0.5(15)<0402>
25(1E)
50(1H)
Tolerance
Part Number
1.0pF(1R0)
±0.25pF(C)
GRM0336R1E1R0CD01D
GRM1556R1H1R0CD01D
2.0pF(2R0)
±0.25pF(C)
GRM0336R1E2R0CD01D
GRM1556R1H2R0CZ01D
3.0pF(3R0)
±0.25pF(C)
GRM0336R1E3R0CD01D
GRM1556R1H3R0CZ01D
4.0pF(4R0)
±0.25pF(C)
GRM0336R1E4R0CD01D
GRM1556R1H4R0CZ01D
5.0pF(5R0)
±0.25pF(C)
GRM0336R1E5R0CD01D
GRM1556R1H5R0CZ01D
6.0pF(6R0)
±0.5pF(D)
GRM0336R1E6R0DD01D
GRM1556R1H6R0DZ01D
7.0pF(7R0)
±0.5pF(D)
GRM0336R1E7R0DD01D
GRM1556R1H7R0DZ01D
8.0pF(8R0)
±0.5pF(D)
GRM0336R1E8R0DD01D
GRM1556R1H8R0DZ01D
9.0pF(9R0)
±0.5pF(D)
GRM0336R1E9R0DD01D
GRM1556R1H9R0DZ01D
10pF(100)
±5%(J)
GRM0336R1E100JD01D
GRM1556R1H100JZ01D
12pF(120)
±5%(J)
GRM0336R1E120JD01D
GRM1556R1H120JZ01D
15pF(150)
±5%(J)
GRM0336R1E150JD01D
GRM1556R1H150JZ01D
18pF(180)
±5%(J)
GRM0336R1E180JD01D
GRM1556R1H180JZ01D
22pF(220)
±5%(J)
GRM0336R1E220JD01D
GRM1556R1H220JZ01D
27pF(270)
±5%(J)
GRM0336R1E270JD01D
GRM1556R1H270JZ01D
33pF(330)
±5%(J)
GRM0336R1E330JD01D
GRM1556R1H330JZ01D
39pF(390)
±5%(J)
GRM0336R1E390JD01D
47pF(470)
±5%(J)
GRM0336R1E470JD01D
56pF(560)
±5%(J)
GRM0336R1E560JD01D
68pF(680)
±5%(J)
GRM0336R1E680JD01D
82pF(820)
±5%(J)
GRM0336R1E820JD01D
100pF(101)
±5%(J)
GRM0336R1E101JD01D
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
33
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
Temperature Compensating Type S2H(6S) Characteristics
LxW [mm]
0.6x0.3(03)<0201>
1.0x0.5(15)<0402>
25(1E)
50(1H)
Rated Volt. [Vdc]
Capacitance
Tolerance
Part Number
1.0pF(1R0)
±0.25pF(C)
GRM0336S1E1R0CD01D
GRM1556S1H1R0CD01D
2.0pF(2R0)
±0.25pF(C)
GRM0336S1E2R0CD01D
GRM1556S1H2R0CZ01D
3.0pF(3R0)
±0.25pF(C)
GRM0336S1E3R0CD01D
GRM1556S1H3R0CZ01D
4.0pF(4R0)
±0.25pF(C)
GRM0336S1E4R0CD01D
GRM1556S1H4R0CZ01D
5.0pF(5R0)
±0.25pF(C)
GRM0336S1E5R0CD01D
GRM1556S1H5R0CZ01D
6.0pF(6R0)
±0.5pF(D)
GRM0336S1E6R0DD01D
GRM1556S1H6R0DZ01D
7.0pF(7R0)
±0.5pF(D)
GRM0336S1E7R0DD01D
GRM1556S1H7R0DZ01D
8.0pF(8R0)
±0.5pF(D)
GRM0336S1E8R0DD01D
GRM1556S1H8R0DZ01D
9.0pF(9R0)
±0.5pF(D)
GRM0336S1E9R0DD01D
GRM1556S1H9R0DZ01D
10pF(100)
±5%(J)
GRM0336S1E100JD01D
GRM1556S1H100JZ01D
12pF(120)
±5%(J)
GRM0336S1E120JD01D
GRM1556S1H120JZ01D
15pF(150)
±5%(J)
GRM0336S1E150JD01D
GRM1556S1H150JZ01D
18pF(180)
±5%(J)
GRM0336S1E180JD01D
GRM1556S1H180JZ01D
22pF(220)
±5%(J)
GRM0336S1E220JD01D
GRM1556S1H220JZ01D
27pF(270)
±5%(J)
GRM0336S1E270JD01D
GRM1556S1H270JZ01D
33pF(330)
±5%(J)
GRM0336S1E330JD01D
GRM1556S1H330JZ01D
39pF(390)
±5%(J)
GRM0336S1E390JD01D
GRM1556S1H390JZ01D
47pF(470)
±5%(J)
GRM0336S1E470JD01D
56pF(560)
±5%(J)
GRM0336S1E560JD01D
68pF(680)
±5%(J)
GRM0336S1E680JD01D
82pF(820)
±5%(J)
GRM0336S1E820JD01D
100pF(101)
±5%(J)
GRM0336S1E101JD01D
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
qProduct ID
wSeries
tTemperature Characteristics
u i o !0 iCapacitance Tolerance
q w e r t y
Packaging Code in Part Number is a code shows STD 180mm Reel Taping.
(Part Number) GR
34
M
03
3
6S
1E
1R0
C
D01 D
eDimension (LxW)
yRated Voltage
oIndividual Specification Code
rDimension (T)
uCapacitance
!0Packaging
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
Temperature Compensating Type T2H(6T) Characteristics
LxW [mm]
Rated Volt. [Vdc]
Capacitance
0.6x0.3(03)<0201>
1.0x0.5(15)<0402>
25(1E)
50(1H)
Tolerance
Part Number
1.0pF(1R0)
±0.25pF(C)
GRM0336T1E1R0CD01D
GRM1556T1H1R0CD01D
2.0pF(2R0)
±0.25pF(C)
GRM0336T1E2R0CD01D
GRM1556T1H2R0CD01D
3.0pF(3R0)
±0.25pF(C)
GRM0336T1E3R0CD01D
GRM1556T1H3R0CD01D
4.0pF(4R0)
±0.25pF(C)
GRM0336T1E4R0CD01D
GRM1556T1H4R0CD01D
5.0pF(5R0)
±0.25pF(C)
GRM0336T1E5R0CD01D
GRM1556T1H5R0CD01D
6.0pF(6R0)
±0.5pF(D)
GRM0336T1E6R0DD01D
GRM1556T1H6R0DD01D
7.0pF(7R0)
±0.5pF(D)
GRM0336T1E7R0DD01D
GRM1556T1H7R0DD01D
8.0pF(8R0)
±0.5pF(D)
GRM0336T1E8R0DD01D
GRM1556T1H8R0DD01D
9.0pF(9R0)
±0.5pF(D)
GRM0336T1E9R0DD01D
GRM1556T1H9R0DD01D
10pF(100)
±5%(J)
GRM0336T1E100JD01D
GRM1556T1H100JD01D
12pF(120)
±5%(J)
GRM0336T1E120JD01D
GRM1556T1H120JD01D
15pF(150)
±5%(J)
GRM0336T1E150JD01D
GRM1556T1H150JD01D
18pF(180)
±5%(J)
GRM0336T1E180JD01D
GRM1556T1H180JD01D
22pF(220)
±5%(J)
GRM0336T1E220JD01D
GRM1556T1H220JD01D
27pF(270)
±5%(J)
GRM0336T1E270JD01D
GRM1556T1H270JD01D
33pF(330)
±5%(J)
GRM0336T1E330JD01D
GRM1556T1H330JD01D
39pF(390)
±5%(J)
GRM0336T1E390JD01D
GRM1556T1H390JD01D
47pF(470)
±5%(J)
GRM0336T1E470JD01D
GRM1556T1H470JD01D
56pF(560)
±5%(J)
GRM0336T1E560JD01D
GRM1556T1H560JD01D
68pF(680)
±5%(J)
GRM0336T1E680JD01D
GRM1556T1H680JD01D
82pF(820)
±5%(J)
GRM0336T1E820JD01D
GRM1556T1H820JD01D
100pF(101)
±5%(J)
GRM0336T1E101JD01D
GRM1556T1H101JD01D
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
35
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
High Dielectric Constant Type X7R(R7) Characteristics
0.4x0.2(02)<01005>
LxW [mm]
10(1A)
Rated Volt. [Vdc]
Capacitance
Tolerance
Part Number
68pF(680)
±10%(K)
GRM022R71A680KA01L
100pF(101)
±10%(K)
GRM022R71A101KA01L
150pF(151)
±10%(K)
GRM022R71A151KA01L
220pF(221)
±10%(K)
GRM022R71A221KA01L
330pF(331)
±10%(K)
GRM022R71A331KA01L
470pF(471)
±10%(K)
GRM022R71A471KA01L
0.6x0.3(03)<0201>
LxW [mm]
25(1E)
Rated Volt. [Vdc]
Capacitance
16(1C)
Tolerance
10(1A)
Part Number
100pF(101)
±10%(K)
GRM033R71E101KA01D
150pF(151)
±10%(K)
GRM033R71E151KA01D
220pF(221)
±10%(K)
GRM033R71E221KA01D
330pF(331)
±10%(K)
GRM033R71E331KA01D
470pF(471)
±10%(K)
GRM033R71E471KA01D
680pF(681)
±10%(K)
GRM033R71E681KA01D
1000pF(102)
±10%(K)
GRM033R71E102KA01D
1500pF(152)
±10%(K)
GRM033R71E152KA01D
2200pF(222)
±10%(K)
GRM033R71C222KA88D
3300pF(332)
±10%(K)
GRM033R71C332KA88D
4700pF(472)
±10%(K)
GRM033R71A472KA01D
6800pF(682)
±10%(K)
GRM033R71A682KA01D
10000pF(103)
±10%(K)
GRM033R71A103KA01D
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
qProduct ID
wSeries
tTemperature Characteristics
u i o !0 iCapacitance Tolerance
q w e r t y
Packaging Code in Part Number is a code shows STD 180mm Reel Taping.
(Part Number) GR
36
M
02
2
R7 1A
680
K
A01 L
eDimension (LxW)
rDimension (T)
yRated Voltage
uCapacitance
oIndividual Specification Code !0Packaging*
*GRM022: D is applicable.
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
High Dielectric Constant Type X7R(R7) Characteristics
1.0x0.5(15)<0402>
LxW [mm]
100(2A)
Rated Volt. [Vdc]
Capacitance
50(1H)
Tolerance
25(1E)
16(1C)
Part Number
220pF(221)
±10%(K)
GRM155R72A221KA01D
GRM155R71H221KA01D
330pF(331)
±10%(K)
GRM155R72A331KA01D
GRM155R71H331KA01D
470pF(471)
±10%(K)
GRM155R72A471KA01D
GRM155R71H471KA01D
680pF(681)
±10%(K)
GRM155R72A681KA01D
GRM155R71H681KA01D
1000pF(102)
±10%(K)
GRM155R72A102KA01D
GRM155R71H102KA01D
1500pF(152)
±10%(K)
GRM155R72A152KA01D
GRM155R71H152KA01D
2200pF(222)
±10%(K)
GRM155R72A222KA01D
GRM155R71H222KA01D
3300pF(332)
±10%(K)
GRM155R72A332KA01D
GRM155R71H332KA01D
4700pF(472)
±10%(K)
GRM155R72A472KA01D
GRM155R71H472KA01D
GRM155R71E472KA01D
6800pF(682)
±10%(K)
GRM155R71H682KA88D
GRM155R71E682KA01D
10000pF(103)
±10%(K)
GRM155R71H103KA88D
GRM155R71E103KA01D
15000pF(153)
±10%(K)
GRM155R71H153KA12D
GRM155R71E153KA61D
GRM155R71C153KA01D
22000pF(223)
±10%(K)
GRM155R71H223KA12D
GRM155R71E223KA61D
GRM155R71C223KA01D
33000pF(333)
±10%(K)
GRM155R71E333KA88D
GRM155R71C333KA01D
47000pF(473)
±10%(K)
GRM155R71E473KA88D
GRM155R71C473KA01D
68000pF(683)
±10%(K)
GRM155R71C683KA88D
0.10µF(104)
±10%(K)
GRM155R71C104KA88D
1.0x0.5(15)<0402>
LxW [mm]
10(1A)
Rated Volt. [Vdc]
Capacitance
Tolerance
Part Number
68000pF(683)
±10%(K)
GRM155R71A683KA01D
0.10µF(104)
±10%(K)
GRM155R71A104KA01D
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
37
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
High Dielectric Constant Type X7R(R7)/X7S(C7) Characteristics
1.6x0.8(18)<0603>
LxW [mm]
100(2A)
Rated Volt. [Vdc]
Capacitance
50(1H)
Tolerance
25(1E)
16(1C)
Part Number
220pF(221)
±10%(K)
GRM188R72A221KA01D
GRM188R71H221KA01D
330pF(331)
±10%(K)
GRM188R72A331KA01D
GRM188R71H331KA01D
470pF(471)
±10%(K)
GRM188R72A471KA01D
GRM188R71H471KA01D
680pF(681)
±10%(K)
GRM188R72A681KA01D
GRM188R71H681KA01D
1000pF(102)
±10%(K)
GRM188R72A102KA01D
GRM188R71H102KA01D
1500pF(152)
±10%(K)
GRM188R72A152KA01D
GRM188R71H152KA01D
2200pF(222)
±10%(K)
GRM188R72A222KA01D
GRM188R71H222KA01D
3300pF(332)
±10%(K)
GRM188R72A332KA01D
GRM188R71H332KA01D
4700pF(472)
±10%(K)
GRM188R72A472KA01D
GRM188R71H472KA01D
6800pF(682)
±10%(K)
GRM188R72A682KA01D
GRM188R71H682KA01D
10000pF(103)
±10%(K)
GRM188R72A103KA01D
GRM188R71H103KA01D
GRM188R71E103KA01D
15000pF(153)
±10%(K)
GRM188R71H153KA01D
GRM188R71E153KA01D
22000pF(223)
±10%(K)
GRM188R71H223KA01D
GRM188R71E223KA01D
33000pF(333)
±10%(K)
GRM188R71H333KA61D
GRM188R71E333KA01D
47000pF(473)
±10%(K)
GRM188R71H473KA61D
GRM188R71E473KA01D
68000pF(683)
±10%(K)
GRM188R71H683KA93D
GRM188R71E683KA01D
0.10µF(104)
±10%(K)
GRM188R71H104KA93D
GRM188R71E104KA01D
0.15µF(154)
±10%(K)
GRM188R71E154KA01D
GRM188R71C154KA01D
0.22µF(224)
±10%(K)
GRM188R71E224KA88D
GRM188R71C224KA01D
0.33µF(334)
±10%(K)
0.47µF(474)
±10%(K)
GRM188R71E474KA12D*
GRM188R71C474KA88D
1.0µF(105)
±10%(K)
GRM188R71E105KA12D*
GRM188R71C105KA12D*
GRM188R72A104KA35D
GRM188R71C334KA01D
1.6x0.8(18)<0603>
LxW [mm]
10(1A)
Rated Volt. [Vdc]
Capacitance
6.3(0J)
Tolerance
4(0G)
Part Number
0.33µF(334)
±10%(K)
GRM188R71A334KA61D
0.47µF(474)
±10%(K)
GRM188R71A474KA61D
0.68µF(684)
±10%(K)
GRM188R71A684KA61D
1.0µF(105)
±10%(K)
GRM188R71A105KA61D*
2.2µF(225)
±10%(K)
GRM188R71A225KE15D*
GRM188C70J225KE20D*
GRM188C70G225KE20D*
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
*: Please refer to GRM Series Specifications and Test Method(2).
qProduct ID
wSeries
tTemperature Characteristics
u i o !0 iCapacitance Tolerance
q w e r t y
Packaging Code in Part Number is a code shows STD 180mm Reel Taping.
(Part Number) GR
38
M
18
8
R7 2A
221
K
A01 D
eDimension (LxW)
yRated Voltage
oIndividual Specification Code
rDimension (T)
uCapacitance
!0Packaging
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
High Dielectric Constant Type X7R(R7)/X7U(E7) Characteristics
2.0x1.25(21)<0805>
LxW [mm]
100(2A)
Rated Volt. [Vdc]
Capacitance
50(1H)
Tolerance
25(1E)
16(1C)
Part Number
6800pF(682)
±10%(K)
GRM219R72A682KA01D
10000pF(103)
±10%(K)
GRM21BR72A103KA01L
15000pF(153)
±10%(K)
GRM21BR72A153KA01L
22000pF(223)
±10%(K)
GRM21BR72A223KA01L
33000pF(333)
±10%(K)
GRM21BR72A333KA01L
GRM219R71H333KA01D
47000pF(473)
±10%(K)
GRM21BR72A473KA01L
GRM21BR71H473KA01L
68000pF(683)
±10%(K)
GRM21BR71H683KA01L
GRM219R71E683KA01D
0.10µF(104)
±10%(K)
GRM21BR71H104KA01L
GRM21BR71E104KA01L
0.15µF(154)
±10%(K)
GRM21BR71H154KA01L
GRM21BR71E154KA01L
0.22µF(224)
±10%(K)
GRM21AR72A224KAC5L
GRM21BR71H224KA01L
GRM21BR71E224KA01L
0.33µF(334)
±10%(K)
GRM21AR72A334KAC5L
GRM219R71H334KA88D
GRM21BR71E334KA01L
0.47µF(474)
±10%(K)
GRM21BR72A474KA73L
GRM21BR71H474KA88L
GRM219R71E474KA88D
0.68µF(684)
±10%(K)
GRM219R71E684KA88D
GRM219R71C684KA01D
1.0µF(105)
±10%(K)
GRM21BR71H105KA12L
GRM21BR71E105KA99L
GRM21BR71C105KA01L
2.2µF(225)
±10%(K)
4.7µF(475)
±10%(K)
GRM219R71E105KA88D
GRM21BR71E225KA73L*
GRM21BR71C475KA73L*
2.0x1.25(21)<0805>
LxW [mm]
10(1A)
Rated Volt. [Vdc]
Capacitance
GRM21BR71C225KA12L
Tolerance
6.3(0J)
4(0G)
Part Number
2.2µF(225)
±10%(K)
GRM21BR71A225KA01L
4.7µF(475)
±10%(K)
GRM21BR71A475KA73L*
10µF(106)
±10%(K)
GRM21BR71A106KE51L*
22µF(226)
±20%(M)
GRM21BR70J106KE76L*
GRM21BE70G226ME51L*
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
*: Please refer to GRM Series Specifications and Test Method(2).
39
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
High Dielectric Constant Type X7R(R7)/X7U(E7) Characteristics
3.2x1.6(31)<1206>
LxW [mm]
100(2A)
Rated Volt. [Vdc]
Capacitance
50(1H)
Tolerance
25(1E)
16(1C)
GRM31MR71C225KA35L
Part Number
15000pF(153)
±10%(K)
GRM319R72A153KA01L
22000pF(223)
±10%(K)
GRM31MR72A223KA01L
33000pF(333)
±10%(K)
GRM31MR72A333KA01L
47000pF(473)
±10%(K)
GRM31MR72A473KA01L
68000pF(683)
±10%(K)
GRM31MR72A683KA01L
0.10µF(104)
±10%(K)
GRM319R72A104KA01D
0.15µF(154)
±10%(K)
GRM31MR72A154KA01L
GRM31MR71H154KA01L
0.22µF(224)
±10%(K)
GRM31MR72A224KA01L
GRM31MR71H224KA01L
0.33µF(334)
±10%(K)
0.47µF(474)
±10%(K)
GRM31MR72A474KA35L
GRM31MR71H474KA01L
0.68µF(684)
±10%(K)
GRM31MR72A684KA35L
GRM31MR71H684KA88L
1.0µF(105)
±10%(K)
GRM31CR72A105KA01L
GRM31MR71H105KA88L
2.2µF(225)
±10%(K)
GRM31CR71H225KA88L
GRM31MR71E225KA93L
4.7µF(475)
±10%(K)
GRM31CR71H475KA12L
GRM31CR71E475KA88L
GRM31CR71C475KA01L
10µF(106)
±10%(K)
GRM31CR71E106KA12L*
GRM31CR71C106KAC7L*
GRM319R71H334KA01D
3.2x1.6(31)<1206>
LxW [mm]
10(1A)
Rated Volt. [Vdc]
Capacitance
6.3(0J)
Tolerance
10µF(106)
±10%(K)
GRM31CR71A106KA01L
22µF(226)
±20%(M)
GRM31CR71A226ME15L*
47µF(476)
±20%(M)
GRM31CR70J226ME19L*
GRM31CE70G476ME15L*
3.2x2.5(32)<1210>
LxW [mm]
100(2A)
Rated Volt. [Vdc]
Capacitance
50(1H)
Tolerance
35(YA)
25(1E)
GRM32ER7YA106KA12L
GRM32DR71E106KA12L
Part Number
0.68µF(684)
±10%(K)
GRM32CR72A684KA01L
1.0µF(105)
±10%(K)
GRM32CR72A105KA35L
2.2µF(225)
±10%(K)
GRM32ER72A225KA35L
4.7µF(475)
±10%(K)
10µF(106)
±10%(K)
22µF(226)
±20%(M)
GRM32NR71H684KA01L
GRM32ER71H475KA88L
GRM32ER71E226ME15L*
3.2x2.5(32)<1210>
LxW [mm]
16(1C)
Rated Volt. [Vdc]
Capacitance
4(0G)
Part Number
10(1A)
Tolerance
22µF(226)
±20%(M)
47µF(476)
±20%(M)
6.3(0J)
Part Number
GRM32ER71C226ME18L*
GRM32ER71A476ME15L*
GRM32ER70J476ME20L*
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
*: Please refer to GRM Series Specifications and Test Method(2).
qProduct ID
wSeries
tTemperature Characteristics
u i o !0 iCapacitance Tolerance
q w e r t y
Packaging Code in Part Number is a code shows STD 180mm Reel Taping.
(Part Number) GR
40
M
31
9
R7 2A
153
K
A01 L
eDimension (LxW)
yRated Voltage
oIndividual Specification Code
rDimension (T)
uCapacitance
!0Packaging
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
High Dielectric Constant Type X7R(R7)/X7T(D7) Characteristics Low Profile
1.0x0.5(15)<0402>
LxW [mm]
50(1H)
Rated Volt. [Vdc]
Capacitance
25(1E)
Tolerance
16(1C)
Part Number
220pF(221)
±10%(K)
GRM15XR71H221KA86D
330pF(331)
±10%(K)
GRM15XR71H331KA86D
470pF(471)
±10%(K)
GRM15XR71H471KA86D
680pF(681)
±10%(K)
GRM15XR71H681KA86D
1000pF(102)
±10%(K)
GRM15XR71H102KA86D
1500pF(152)
±10%(K)
GRM15XR71H152KA86D
2200pF(222)
±10%(K)
3300pF(332)
±10%(K)
GRM15XR71C332KA86D
4700pF(472)
±10%(K)
GRM15XR71C472KA86D
6800pF(682)
±10%(K)
GRM15XR71C682KA86D
10000pF(103)
±10%(K)
GRM15XR71C103KA86D
1.6x0.8(18)<0603>
LxW [mm]
10(1A)
Rated Volt. [Vdc]
Capacitance
1.0µF(105)
GRM15XR71E222KA86D
Tolerance
±10%(K)
Part Number
GRM185D71A105KE36D*
2.0x1.25(21)<0805>
LxW [mm]
100(2A)
Rated Volt. [Vdc]
Capacitance
50(1H)
Tolerance
25(1E)
16(1C)
Part Number
6800pF(682)
±10%(K)
33000pF(333)
±10%(K)
68000pF(683)
±10%(K)
0.22µF(224)
±10%(K)
GRM21AR72A224KAC5L
0.33µF(334)
±10%(K)
GRM21AR72A334KAC5L
0.47µF(474)
±10%(K)
GRM219R71E474KA88D
0.68µF(684)
±10%(K)
GRM219R71E684KA88D
1.0µF(105)
±10%(K)
GRM219R71E105KA88D
GRM219R72A682KA01D
GRM219R71H333KA01D
GRM219R71E683KA01D
GRM219R71H334KA88D
GRM219R71C684KA01D
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
*: Please refer to GRM Series Specifications and Test Method(2).
High Dielectric Constant Type X7R(R7) Characteristics Low Profile
3.2x1.6(31)<1206>
LxW [mm]
100(2A)
Rated Volt. [Vdc]
Capacitance
50(1H)
Tolerance
15000pF(153)
±10%(K)
GRM319R72A153KA01L
22000pF(223)
±10%(K)
GRM31MR72A223KA01L
33000pF(333)
±10%(K)
GRM31MR72A333KA01L
47000pF(473)
±10%(K)
GRM31MR72A473KA01L
68000pF(683)
±10%(K)
GRM31MR72A683KA01L
0.10µF(104)
±10%(K)
GRM319R72A104KA01D
0.15µF(154)
±10%(K)
GRM31MR72A154KA01L
GRM31MR71H154KA01L
0.22µF(224)
±10%(K)
GRM31MR72A224KA01L
GRM31MR71H224KA01L
0.33µF(334)
±10%(K)
0.47µF(474)
±10%(K)
GRM31MR72A474KA35L
GRM31MR71H474KA01L
0.68µF(684)
±10%(K)
GRM31MR72A684KA35L
GRM31MR71H684KA88L
1.0µF(105)
±10%(K)
2.2µF(225)
±10%(K)
16(1C)
GRM31MR71E225KA93L
GRM31MR71C225KA35L
GRM319R71H334KA01D
GRM31MR71H105KA88L
3.2x2.5(32)<1210>
LxW [mm]
100(2A)
Rated Volt. [Vdc]
Capacitance
25(1E)
Part Number
Tolerance
50(1H)
Part Number
0.68µF(684)
±10%(K)
GRM32CR72A684KA01L
1.0µF(105)
±10%(K)
GRM32CR72A105KA35L
The part number code is shown in ( ) and Unit is shown in [ ].
GRM32NR71H684KA01L
< >: EIA [inch] Code
41
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
High Dielectric Constant Type X6S(C8) Characteristics
0.6x0.3(03)<0201>
LxW [mm]
6.3(0J)
Rated Volt. [Vdc]
Capacitance
Tolerance
2.5(0E)
Part Number
15000pF(153)
±10%(K)
GRM033C80J153KE01D*
22000pF(223)
±10%(K)
GRM033C80J223KE01D*
33000pF(333)
±10%(K)
GRM033C80J333KE01D*
47000pF(473)
±10%(K)
GRM033C80J473KE19D*
0.10µF(104)
±10%(K)
GRM033C80J104KE84D*
0.22µF(224)
±10%(K)
GRM033C80E224ME15D*
1.0x0.5(15)<0402>
LxW [mm]
25(1E)
Rated Volt. [Vdc]
Capacitance
6.3(0J)
Tolerance
4(0G)
Part Number
68000pF(683)
±10%(K)
GRM155C81E683KA12D
0.10µF(104)
±10%(K)
GRM155C81E104KA12D
0.15µF(154)
±10%(K)
GRM155C80J154KE01D*
GRM155C80G154KE01D*
0.22µF(224)
±10%(K)
GRM155C80J224KE01D*
GRM155C80G224KE01D*
0.33µF(334)
±10%(K)
GRM155C80J334KE01D*
GRM155C80G334KE01D*
0.47µF(474)
±10%(K)
GRM155C80J474KE19D*
GRM155C80G474KE01D*
0.68µF(684)
±10%(K)
GRM155C80G684KE19D*
1.6x0.8(18)<0603>
LxW [mm]
10(1A)
Rated Volt. [Vdc]
Capacitance
6.3(0J)
Tolerance
1.0µF(105)
±10%(K)
2.2µF(225)
±10%(K)
4.7µF(475)
±10%(K)
10µF(106)
±20%(M)
2.5(0E)
GRM188C80G105MA01D
GRM188C81A225KE34D*
GRM188C80J225KE19D*
GRM188C80G475KE19D*
GRM188C80E106ME47D*
2.0x1.25(21)<0805>
LxW [mm]
25(1E)
Rated Volt. [Vdc]
Capacitance
4(0G)
Part Number
16(1C)
Tolerance
10(1A)
6.3(0J)
Part Number
1.0µF(105)
±10%(K)
GRM216C81C105KA12D*
2.2µF(225)
±10%(K)
GRM219C81C225KA12D*
4.7µF(475)
±10%(K)
10µF(106)
±10%(K)
GRM21BC81E475KA12L*
GRM21BC81C475KA88L*
GRM219C81A475KE34D*
GRM219C80J475KE19D*
GRM21BC81A106KE18L*
GRM21BC80J106KE19L*
GRM219C80J106KE39D*
2.0x1.25(21)<0805>
LxW [mm]
4(0G)
Rated Volt. [Vdc]
Capacitance
Tolerance
Part Number
10µF(106)
±10%(K)
GRM219C80G106KE19D*
22µF(226)
±20%(M)
GRM21BC80G226ME39L*
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
*: Please refer to GRM Series Specifications and Test Method(2).
qProduct ID
wSeries
tTemperature Characteristics
u i o !0 iCapacitance Tolerance
q w e r t y
Packaging Code in Part Number is a code shows STD 180mm Reel Taping.
(Part Number) GR
42
M
03
3
C8
0J
153
K
E01 D
eDimension (LxW)
yRated Voltage
oIndividual Specification Code
rDimension (T)
uCapacitance
!0Packaging
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
High Dielectric Constant Type X6S(C8)/X6T(D8) Characteristics
3.2x1.6(31)<1206>
LxW [mm]
25(1E)
Rated Volt. [Vdc]
Capacitance
±10%(K)
4.7µF(475)
±10%(K)
10µF(106)
±10%(K)
22µF(226)
±20%(M)
47µF(476)
±20%(M)
6.3(0J)
Part Number
GRM316C81C225KA12D*
GRM319C81C475KA12D*
GRM31CC81E106KE15L*
GRM31CC81A226ME19L*
GRM31CC80J226ME19L*
GRM31CC80J476ME18L*
3.2x1.6(31)<1206>
LxW [mm]
4(0G)
Rated Volt. [Vdc]
Tolerance
Part Number
47µF(476)
±20%(M)
GRM31CC80G476ME19L*
100µF(107)
±20%(M)
GRM31CD80G107ME39L*
3.2x2.5(32)<1210>
LxW [mm]
25(1E)
Rated Volt. [Vdc]
Capacitance
10(1A)
Tolerance
2.2µF(225)
Capacitance
16(1C)
10(1A)
Tolerance
6.3(0J)
Part Number
10µF(106)
±10%(K)
GRM32DC81E106KA12L
22µF(226)
±20%(M)
GRM32EC81E226ME15L*
47µF(476)
±20%(M)
GRM32EC81A476ME19L*
GRM32EC80J476ME64L*
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
*: Please refer to GRM Series Specifications and Test Method(2).
High Dielectric Constant Type X6S(C8) Characteristics Low Profile
1.6x0.8(18)<0603>
LxW [mm]
10(1A)
Rated Volt. [Vdc]
Capacitance
1.0µF(105)
Tolerance
±10%(K)
6.3(0J)
Part Number
GRM185C81A105KE36D*
GRM185C80J105KE26D*
16(1C)
10(1A)
2.0x1.25(21)<0805>
LxW [mm]
Rated Volt. [Vdc]
Capacitance
Tolerance
±10%(K)
GRM216C81C105KA12D*
2.2µF(225)
±10%(K)
GRM219C81C225KA12D*
4.7µF(475)
±10%(K)
10µF(106)
±10%(K)
GRM219C81A475KE34D*
GRM219C80G106KE19D*
16(1C)
Rated Volt. [Vdc]
Tolerance
Part Number
2.2µF(225)
±10%(K)
GRM316C81C225KA12D*
4.7µF(475)
±10%(K)
GRM319C81C475KA12D*
3.2x2.5(32)<1210>
LxW [mm]
25(1E)
Rated Volt. [Vdc]
10µF(106)
GRM219C80J475KE19D*
GRM219C80J106KE39D*
3.2x1.6(31)<1206>
LxW [mm]
Capacitance
4(0G)
Part Number
1.0µF(105)
Capacitance
6.3(0J)
Tolerance
±10%(K)
Part Number
GRM32DC81E106KA12L
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
*: Please refer to GRM Series Specifications and Test Method(2).
43
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
High Dielectric Constant Type X5R(R6) Characteristics
0.4x0.2(02)<01005>
LxW [mm]
10(1A)
Rated Volt. [Vdc]
Capacitance
Tolerance
6.3(0J)
Part Number
68pF(680)
±10%(K)
GRM022R61A680KA01L
100pF(101)
±10%(K)
GRM022R61A101KA01L
150pF(151)
±10%(K)
GRM022R61A151KA01L
220pF(221)
±10%(K)
GRM022R61A221KA01L
330pF(331)
±10%(K)
GRM022R61A331KA01L
470pF(471)
±10%(K)
GRM022R61A471KA01L
680pF(681)
±10%(K)
GRM022R60J681KE19L*
1000pF(102)
±10%(K)
GRM022R60J102KE19L*
1500pF(152)
±10%(K)
GRM022R60J152KE19L*
2200pF(222)
±10%(K)
GRM022R60J222KE19L*
3300pF(332)
±10%(K)
GRM022R60J332KE19L*
4700pF(472)
±10%(K)
GRM022R60J472KE19L*
6800pF(682)
±10%(K)
GRM022R60J682KE19L*
10000pF(103)
±10%(K)
GRM022R60J103KE19L*
0.6x0.3(03)<0201>
LxW [mm]
25(1E)
Rated Volt. [Vdc]
Capacitance
16(1C)
Tolerance
10(1A)
6.3(0J)
Part Number
100pF(101)
±10%(K)
150pF(151)
±10%(K)
220pF(221)
±10%(K)
330pF(331)
±10%(K)
470pF(471)
±10%(K)
680pF(681)
±10%(K)
1000pF(102)
±10%(K)
1500pF(152)
±10%(K)
GRM033R61A152KA01D
2200pF(222)
±10%(K)
GRM033R61A222KA01D
3300pF(332)
±10%(K)
GRM033R61A332KA01D
4700pF(472)
±10%(K)
GRM033R61A472KA01D
6800pF(682)
±10%(K)
GRM033R61A682KA01D
10000pF(103)
±10%(K)
GRM033R61A103KA01D
15000pF(153)
±10%(K)
GRM033R60J153KE01D*
22000pF(223)
±10%(K)
GRM033R60J223KE01D*
33000pF(333)
±10%(K)
GRM033R60J333KE01D*
47000pF(473)
±10%(K)
0.10µF(104)
±10%(K)
GRM033R60J473KE19D*
GRM033R61A104KE84D*
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
: Please refer to X7R(R7) etc Characteristics.
*: Please refer to GRM Series Specifications and Test Method(2).
qProduct ID
wSeries
tTemperature Characteristics
u i o !0 iCapacitance Tolerance
q w e r t y
Packaging Code in Part Number is a code shows STD 180mm Reel Taping.
(Part Number) GR
44
M
02
2
R6 1A
680
K
A01 L
eDimension (LxW)
rDimension (T)
yRated Voltage
uCapacitance
oIndividual Specification Code !0Packaging*
*GRM022: D is applicable.
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
High Dielectric Constant Type X5R(R6) Characteristics
1.0x0.5(15)<0402>
LxW [mm]
100(2A)
Rated Volt. [Vdc]
Capacitance
50(1H)
Tolerance
25(1E)
16(1C)
Part Number
220pF(221)
±10%(K)
330pF(331)
±10%(K)
470pF(471)
±10%(K)
680pF(681)
±10%(K)
1000pF(102)
±10%(K)
1500pF(152)
±10%(K)
2200pF(222)
±10%(K)
3300pF(332)
±10%(K)
4700pF(472)
±10%(K)
6800pF(682)
±10%(K)
10000pF(103)
±10%(K)
15000pF(153)
±10%(K)
22000pF(223)
±10%(K)
GRM155R61C223KA01D
33000pF(333)
±10%(K)
GRM155R61C333KA01D
47000pF(473)
±10%(K)
68000pF(683)
±10%(K)
GRM155R61E683KA87D
GRM155R61C683KA88D
0.10µF(104)
±10%(K)
GRM155R61E104KA87D
GRM155R61C104KA88D
GRM155R61H102KA01D
GRM155R61H222KA01D
GRM155R61H472KA01D
GRM155R61C473KA01D
1.0x0.5(15)<0402>
LxW [mm]
10(1A)
Rated Volt. [Vdc]
Capacitance
Tolerance
6.3(0J)
4(0G)
Part Number
33000pF(333)
±10%(K)
GRM155R61A333KA01D
47000pF(473)
±10%(K)
GRM155R61A473KA01D
68000pF(683)
±10%(K)
GRM155R61A683KA01D
0.10µF(104)
±10%(K)
GRM155R61A104KA01D
0.15µF(154)
±10%(K)
GRM155R61A154KE19D*
GRM155R60J154KE01D*
0.22µF(224)
±10%(K)
GRM155R61A224KE19D*
GRM155R60J224KE01D*
0.33µF(334)
±10%(K)
GRM155R61A334KE15D*
GRM155R60J334KE01D*
0.47µF(474)
±10%(K)
GRM155R61A474KE15D*
GRM155R60J474KE19D*
0.68µF(684)
±10%(K)
GRM155R61A684KE15D*
GRM155R60J684KE19D*
1.0µF(105)
±10%(K)
GRM155R61A105KE15D*
4.7µF(475)
±20%(M)
GRM155R60G475ME87D*
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
: Please refer to X7R(R7) etc Characteristics.
*: Please refer to GRM Series Specifications and Test Method(2).
45
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
High Dielectric Constant Type X5R(R6) Characteristics
1.6x0.8(18)<0603>
LxW [mm]
100(2A)
Rated Volt. [Vdc]
Capacitance
50(1H)
Tolerance
25(1E)
16(1C)
GRM188R61E104KA01D
GRM188R61C104KA01D
GRM188R61E224KA88D
GRM188R61C224KA88D
Part Number
220pF(221)
±10%(K)
330pF(331)
±10%(K)
470pF(471)
±10%(K)
680pF(681)
±10%(K)
1000pF(102)
±10%(K)
1500pF(152)
±10%(K)
2200pF(222)
±10%(K)
3300pF(332)
±10%(K)
4700pF(472)
±10%(K)
6800pF(682)
±10%(K)
10000pF(103)
±10%(K)
15000pF(153)
±10%(K)
22000pF(223)
±10%(K)
33000pF(333)
±10%(K)
47000pF(473)
±10%(K)
68000pF(683)
±10%(K)
0.10µF(104)
±10%(K)
0.15µF(154)
±10%(K)
0.22µF(224)
±10%(K)
0.33µF(334)
±10%(K)
0.47µF(474)
±10%(K)
GRM188R61E474KA12D*
GRM188R61C474KA93D*
1.0µF(105)
±10%(K)
GRM188R61E105KA12D*
GRM188R61C105KA93D*
2.2µF(225)
±10%(K)
GRM188R61H102KA01D
GRM188R61H222KA01D
GRM188R61H472KA01D
GRM188R61H103KA01D
GRM188R61H223KA01D
GRM188R61C225KE15D*
1.6x0.8(18)<0603>
LxW [mm]
10(1A)
Rated Volt. [Vdc]
Capacitance
6.3(0J)
Tolerance
4(0G)
Part Number
0.15µF(154)
±10%(K)
GRM188R61A154KA01D
0.22µF(224)
±10%(K)
GRM188R61A224KA01D
0.33µF(334)
±10%(K)
0.47µF(474)
±10%(K)
0.68µF(684)
±10%(K)
2.2µF(225)
±10%(K)
4.7µF(475)
±10%(K)
GRM188R60J475KE19D*
10µF(106)
±20%(M)
GRM188R60J106ME47D*
GRM188R61A474KA61D
GRM188R61A225KE34D*
GRM188R60G106ME47D*
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
: Please refer to X7R(R7) etc Characteristics.
*: Please refer to GRM Series Specifications and Test Method(2).
qProduct ID
wSeries
tTemperature Characteristics
u i o !0 iCapacitance Tolerance
q w e r t y
Packaging Code in Part Number is a code shows STD 180mm Reel Taping.
(Part Number) GR
46
M
18
8
R6 1H
102
K
A01 D
eDimension (LxW)
yRated Voltage
oIndividual Specification Code
rDimension (T)
uCapacitance
!0Packaging
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
High Dielectric Constant Type X5R(R6) Characteristics
2.0x1.25(21)<0805>
LxW [mm]
100(2A)
Rated Volt. [Vdc]
Capacitance
50(1H)
Tolerance
25(1E)
16(1C)
Part Number
6800pF(682)
±10%(K)
10000pF(103)
±10%(K)
15000pF(153)
±10%(K)
22000pF(223)
±10%(K)
33000pF(333)
±10%(K)
47000pF(473)
±10%(K)
68000pF(683)
±10%(K)
0.10µF(104)
±10%(K)
0.15µF(154)
±10%(K)
0.22µF(224)
±10%(K)
0.33µF(334)
±10%(K)
GRM21BR61C334KA01L
0.47µF(474)
±10%(K)
GRM21BR61C474KA01L
0.68µF(684)
±10%(K)
1.0µF(105)
±10%(K)
GRM216R61E105KA12D
GRM21BR61C105KA01L
2.2µF(225)
±10%(K)
GRM21BR61E225KA12L
GRM21BR61C225KA88L*
GRM219R61E225KA12D*
GRM219R61C225KA88D*
GRM21BR61E475KA12L*
GRM21BR61C475KA88L*
4.7µF(475)
±10%(K)
10µF(106)
±10%(K)
GRM219R61C475KE15D*
GRM21BR61C106KE15L*
2.0x1.25(21)<0805>
LxW [mm]
10(1A)
Rated Volt. [Vdc]
Capacitance
Tolerance
6.3(0J)
4(0G)
Part Number
2.2µF(225)
±10%(K)
GRM21BR61A225KA01L
4.7µF(475)
±10%(K)
GRM219R61A475KE34D*
10µF(106)
±10%(K)
GRM21BR61A106KE19L*
22µF(226)
±20%(M)
GRM219R60J106KE19D*
GRM219R61A106KE44D*
GRM21BR60J226ME39L*
GRM219R60G226ME66D*
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
: Please refer to X7R(R7) etc Characteristics.
*: Please refer to GRM Series Specifications and Test Method(2).
47
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
High Dielectric Constant Type X5R(R6) Characteristics
3.2x1.6(31)<1206>
LxW [mm]
100(2A)
Rated Volt. [Vdc]
Capacitance
50(1H)
25(1E)
Tolerance
15000pF(153)
±10%(K)
22000pF(223)
±10%(K)
33000pF(333)
±10%(K)
47000pF(473)
±10%(K)
68000pF(683)
±10%(K)
0.10µF(104)
±10%(K)
0.15µF(154)
±10%(K)
0.22µF(224)
±10%(K)
0.33µF(334)
±10%(K)
0.47µF(474)
±10%(K)
0.68µF(684)
±10%(K)
1.0µF(105)
±10%(K)
2.2µF(225)
±10%(K)
4.7µF(475)
±10%(K)
10µF(106)
±10%(K)
22µF(226)
±20%(M)
16(1C)
Part Number
GRM31CR61H225KA88L
GRM316R61E225KA12D*
GRM31CR61E475KA88L
GRM31CR61C475KA01L
GRM319R61E475KA12D*
GRM319R61C475KA88D*
GRM31CR61E106KA12L*
GRM31CR61C106KA88L
GRM319R61C106KE15D*
GRM31CR61C226ME15L*
3.2x1.6(31)<1206>
LxW [mm]
10(1A)
Rated Volt. [Vdc]
Capacitance
6.3(0J)
Tolerance
4(0G)
Part Number
10µF(106)
±10%(K)
GRM319R61A106KE19L*
22µF(226)
±20%(M)
GRM31CR61A226ME19L*
47µF(476)
±20%(M)
GRM31CR60J476ME19L*
100µF(107)
±20%(M)
GRM31CR60J107ME39L*
GRM31CR60J226ME19L*
3.2x2.5(32)<1210>
LxW [mm]
100(2A)
Rated Volt. [Vdc]
Capacitance
50(1H)
Tolerance
0.68µF(684)
±10%(K)
1.0µF(105)
±10%(K)
2.2µF(225)
±10%(K)
4.7µF(475)
±10%(K)
10µF(106)
±10%(K)
22µF(226)
±20%(M)
35(YA)
25(1E)
Part Number
GRM32ER6YA106KA12L
GRM32DR61E106KA12L
GRM32ER61E226ME15L*
3.2x2.5(32)<1210>
LxW [mm]
16(1C)
Rated Volt. [Vdc]
Capacitance
GRM31CR60G107ME39L*
10(1A)
Tolerance
22µF(226)
±20%(M)
47µF(476)
±20%(M)
6.3(0J)
Part Number
GRM32ER61C476ME15L*
GRM32ER61A476ME20L*
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
: Please refer to X7R(R7) etc Characteristics.
*: Please refer to GRM Series Specifications and Test Method(2).
qProduct ID
wSeries
tTemperature Characteristics
u i o !0 iCapacitance Tolerance
q w e r t y
Packaging Code in Part Number is a code shows STD 180mm Reel Taping.
(Part Number) GR
48
M
31
C R6 1H
225
K
A88 L
eDimension (LxW)
yRated Voltage
oIndividual Specification Code
rDimension (T)
uCapacitance
!0Packaging
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
High Dielectric Constant Type X5R(R6) Characteristics Low Profile
1.0x0.5(15)<0402>
LxW [mm]
16(1C)
Rated Volt. [Vdc]
Capacitance
220pF(221)
±10%(K)
330pF(331)
±10%(K)
470pF(471)
±10%(K)
680pF(681)
±10%(K)
1000pF(102)
±10%(K)
1500pF(152)
±10%(K)
2200pF(222)
±10%(K)
3300pF(332)
±10%(K)
4700pF(472)
±10%(K)
6800pF(682)
±10%(K)
10000pF(103)
±10%(K)
1.6x0.8(18)<0603>
16(1C)
Rated Volt. [Vdc]
1.0µF(105)
Tolerance
±10%(K)
10(1A)
Part Number
GRM185R61C105KE44D*
GRM185R61A105KE36D*
100(2A)
50(1H)
2.0x1.25(21)<0805>
LxW [mm]
Rated Volt. [Vdc]
Capacitance
16(1C)
Part Number
LxW [mm]
Capacitance
25(1E)
Tolerance
Tolerance
25(1E)
6800pF(682)
±10%(K)
33000pF(333)
±10%(K)
68000pF(683)
±10%(K)
0.22µF(224)
±10%(K)
0.33µF(334)
±10%(K)
0.47µF(474)
±10%(K)
0.68µF(684)
±10%(K)
1.0µF(105)
±10%(K)
GRM216R61E105KA12D
2.2µF(225)
±10%(K)
GRM219R61E225KA12D*
4.7µF(475)
±10%(K)
GRM219R61C225KA88D*
GRM219R61C475KE15D*
2.0x1.25(21)<0805>
LxW [mm]
10(1A)
Rated Volt. [Vdc]
Capacitance
16(1C)
Part Number
Tolerance
6.3(0J)
4(0G)
Part Number
4.7µF(475)
±10%(K)
GRM219R61A475KE34D*
10µF(106)
±10%(K)
GRM219R61A106KE44D*
22µF(226)
±20%(M)
GRM219R60J106KE19D*
GRM219R60G226ME66D*
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
: Please refer to X7R(R7) etc Characteristics.
*: Please refer to GRM Series Specifications and Test Method(2).
49
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
High Dielectric Constant Type X5R(R6) Characteristics Low Profile
3.2x1.6(31)<1206>
LxW [mm]
100(2A)
Rated Volt. [Vdc]
Capacitance
50(1H)
Tolerance
25(1E)
15000pF(153)
±10%(K)
22000pF(223)
±10%(K)
33000pF(333)
±10%(K)
47000pF(473)
±10%(K)
68000pF(683)
±10%(K)
0.10µF(104)
±10%(K)
0.15µF(154)
±10%(K)
0.22µF(224)
±10%(K)
0.33µF(334)
±10%(K)
0.47µF(474)
±10%(K)
0.68µF(684)
±10%(K)
1.0µF(105)
±10%(K)
2.2µF(225)
±10%(K)
GRM316R61E225KA12D*
4.7µF(475)
±10%(K)
GRM319R61E475KA12D*
10µF(106)
±10%(K)
3.2x1.6(31)<1206>
10(1A)
Rated Volt. [Vdc]
Tolerance
Part Number
±10%(K)
10µF(106)
GRM319R61A106KE19D*
3.2x2.5(32)<1210>
LxW [mm]
100(2A)
Rated Volt. [Vdc]
Capacitance
GRM319R61C475KA88D*
GRM319R61C106KE15D*
LxW [mm]
Capacitance
16(1C)
Part Number
50(1H)
Tolerance
0.68µF(684)
±10%(K)
1.0µF(105)
±10%(K)
10µF(106)
±10%(K)
25(1E)
Part Number
GRM32DR61E106KA12L
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
: Please refer to X7R(R7) etc Characteristics.
*: Please refer to GRM Series Specifications and Test Method(2).
qProduct ID
wSeries
tTemperature Characteristics
u i o !0 iCapacitance Tolerance
q w e r t y
Packaging Code in Part Number is a code shows STD 180mm Reel Taping.
(Part Number) GR
50
M
31
6
R6 1E
225
K
A12 D
eDimension (LxW)
yRated Voltage
oIndividual Specification Code
rDimension (T)
uCapacitance
!0Packaging
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GRM Series
Specifications
and Test
(1) (Note1)
Typical
Inspection
GRM Series
Specifications
andMethods
Test Methods
(1) (Note1)
Typical
Inspection
(Note1) This Specifications and Test Methods indicates typical inspection.
Please refer to individual specifications (our product specifications or the approval sheet).
In case Non "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (1).
In case "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (2).
No.
1
Item
Operating
Temperature
Range
Specifications
Temperature
High Dielectric Type
Compensating Type
–55 to +125°C
(2P/R/S/T, 3P/R/S/T/U,
4P/R/S/T/U: –25 to +85°C)
B1, B3, F1: –25 to +85°C
R1, R7: –55 to +125°C
R6: –55 to +85°C
C8: –55 to +105°C
E4: +10 to +85°C
F5: –30 to +85°C
Test Method
Reference temperature: 25°C
(2∆, 3∆, 4∆, B1, B3, F1, R1: 20°C)
2
Rated Voltage
See the previous pages.
The rated voltage is defined as the maximum voltage which
may be applied continuously to the capacitor.
When AC voltage is superimposed on DC voltage, VP-P or VO-P,
whichever is larger, should be maintained within the rated
voltage range.
3
Appearance
No defects or abnormalities
Visual inspection
4
Dimensions
Within the specified dimensions
Using calipers (GRM02 size is based on Microscope)
No defects or abnormalities
No failure should be observed when 300%* of the rated voltage
(temperature compensating type) or 250% of the rated voltage
(high dielectric constant type) is applied between the
terminations for 1 to 5 seconds, provided the charge/discharge
current is less than 50mA. *200% for 500V
5
Dielectric Strength
6
Insulation
Resistance
7
8
Capacitance
Q/
Dissipation Factor
(D.F.)
CV0.047µF: More than 10,000MΩ
CG0.047µF: More than 500Ω · F
C: Nominal Capacitance
The insulation resistance should be measured with a DC
voltage not exceeding the rated voltage at 20/25°C and 75%RH
max. and within 2 minutes of charging, provided the charge/
discharge current is less than 50mA.
Within the specified tolerance
30pF and over: QU1000
30pF and below:
QU400+20C
C: Nominal Capacitance (pF)
[R6, R7, C8]
W.V.: 100V
: 0.025 max. (CF0.068µF)
: 0.05 max. (CU0.068µF)
W.V.: 50/35/25V:
: 0.025 max.*
*GRM32D R7/R6/C8 1E106: 0.035 max.
W.V.: 16/10V: 0.035 max.
W.V.: 6.3/4V
: 0.05 max. (CF3.3µF)
: 0.1 max. (CU3.3µF)
[E4]
W.V.: 25Vmin: 0.025 max.
[F1, F5]
W.V.: 25V min.
: 0.05 max. (CF0.1µF)
: 0.09 max. (CU0.1µF)
W.V.: 16/10V: 0.125 max.
W.V.: 6.3V: 0.15 max.
The capacitance/Q/D.F. should be measured at 20/25°C at the
frequency and voltage shown in the table.
Char.
Item
∆C to 7U, 1X
∆C
(more than
to 7U, 1X
R6, R7, F5
1000pF)
(1000pF and
(C>10µF)
R6, R7, C8,
below)
F5, B1, B3, F1
Frequency 1±0.1MHz
Voltage
0.5 to 5Vrms
1±0.1kHz
1±0.2Vrms
E4
120±24kHz 1±0.1kHz
0.5±
0.5±
0.1Vrms 0.05Vrms
Continued on the following page.
51
1
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GRM Series
Specifications
andMethods
Test Methods
(1) (Note1)
Typical
Inspection
GRM Series
Specifications
and Test
(1) (Note1)
Typical
Inspection
Continued from the preceding page.
No.
Item
No bias
(Note1) This Specifications and Test Methods indicates typical inspection.
Please refer to individual specifications (our product specifications or the approval sheet).
In case Non "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (1).
In case "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (2).
Specifications
Temperature
High Dielectric Type
Compensating Type
Within the specified tolerance
(Table A-1)
B1, B3: Within ±10%
(–25 to +85°C)
R1, R7: Within ±15%
(–55 to +125°C)
R6: Within ±15%
(–55 to +85°C)
E4: Within +22/–56%
(+10 to +85°C)
F1: Within +30/–80%
(–25 to +85°C)
F5: Within +22/–82%
(–30 to +85°C)
C8: Within ±22%
(–55 to +105°C)
Test Method
The capacitance change should be measured after 5 min. at
each specified temp. stage.
(1)Temperature Compensating Type
The temperature coefficient is determined using the
capacitance measured in step 3 as a reference.
When cycling the temperature sequentially from step 1 through
5 (5C: +25 to +125°C/∆C: +20 to +125°C: other temp. coeffs.:
+25 to +85°C/+20 to +85°C) the capacitance should be within
the specified tolerance for the temperature coefficient and
capacitance change as Table A-1.
The capacitance drift is calculated by dividing the differences
between the maximum and minimum measured values in the
step 1, 3 and 5 by the cap. value in step 3.
Step
1
B1: Within +10/–30%
R1: Within +15/–40%
F1: Within +30/–95%
50% of
the Rated
Voltage
2
3
4
9
5
Capacitance
Temperature
Characteristics
Within ±0.2% or ±0.05pF
Capacitance
(Whichever is larger.)
Drift
*Do not apply to 1X/25V
*Initial measurement for high
dielectric constant type
Perform a heat treatment at
150+0/–10°C for one hour
and then set for 24±2 hours
at room temperature.
Perform the initial
measurement.
Step
1
2
3
5
6
7
8
No removal of the terminations or other defect should occur.
c
Temperature (°C)
Reference Temperature ±2
–55±3 (for ∆C to 7U/R6/R7/C8)
–30±3 (for F5), 10±3 (for E4)
–25±3 (for other TC)
Reference Temperature ±2
125±3 (for ∆C/R7), 105±3 (for C8)
85±3 (for other TC)
Reference Temperature ±2
(2) High Dielectric Constant Type
The ranges of capacitance change compared with the
Reference Temperature value over the temperature ranges
shown in the table should be within the specified ranges.*
In case of applying voltage, the capacitance change should be
measured after 1 more min. with applying voltage in
equilibration of each temp. stage.
4
Temperature (°C)
Applying Voltage (V)
Reference Temperature ±2
–55±3 (for C8, R1, R7, R6)
–25±3 (for B1, B3, F1)
–30±3 (for F5)/10±3 (for E4)
No bias
Reference Temperature ±2
125±3 (for R1, R7)/
85±3 (for B1, B3, R6
F1, F5, E4)/105±3 (for C8)
Reference Temperature ±2
–55±3 (for R1)/
–25±3 (for B1, F1)
50% of the rated
voltage
Reference Temperature ±2
125±3 (for R1)/
85±3 (for B1, F1)
Solder the capacitor to the test jig (glass epoxy board) shown in
Fig. 1a using an eutectic solder. Then apply 10N* force in
parallel with the test jig for 10±1 sec.
The soldering should be done either with an iron or using the
reflow method and should be conducted with care so that the
soldering is uniform and free of defects such as heat shock.
*1N (GRM02), 2N (GRM03), 5N (GRM15, GRM18)
(in mm)
a
Adhesive Strength
10
of Termination
b
1
Solder resist
Baked electrode or
copper foil
Fig. 1a
Type
GRM02
GRM03
GRM15
GRM18
GRM21
GRM31
GRM32
GRM43
GRM55
a
0.2
0.3
0.4
1.0
1.2
2.2
2.2
3.5
4.5
b
0.56
0.9
1.5
3.0
4.0
5.0
5.0
7.0
8.0
c
0.23
0.3
0.5
1.2
1.65
2.0
2.9
3.7
5.6
Continued on the following page.
52
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GRM Series
Specifications
and Test
(1) (Note1)
Typical
Inspection
GRM Series
Specifications
andMethods
Test Methods
(1) (Note1)
Typical
Inspection
Continued from the preceding page.
11
Item
Specifications
Temperature
High Dielectric Type
Compensating Type
Appearance
No defects or abnormalities
Capacitance
Within the specified tolerance
Vibration
Resistance
Q/D.F.
[B1, B3, R6, R7, C8]
W.V.: 100V
: 0.025 max. (CF0.068µF)
: 0.05 max. (CU0.068µF)
W.V.: 50/35/25V:
: 0.025 max.*
*GRM32D R7/R6/C8 1E106: 0.035 max.
W.V.: 16/10V: 0.035 max.
W.V.: 6.3/4V
: 0.05 max. (CF3.3µF)
: 0.1 max. (CU3.3µF)
[E4]
W.V.: 25Vmin: 0.025 max.
[F1, F5]
W.V.: 25V min.
: 0.05 max. (CF0.1µF)
: 0.09 max. (CU0.1µF)
W.V.: 16/10V: 0.125 max.
W.V.: 6.3V: 0.15 max.
30pF and over: QU1000
30pF and below:
QU400+20C
C: Nominal Capacitance (pF)
Appearance
No marking defects
Capacitance
Change
Within ±5% or ±0.5pF
(Whichever is larger)
Within ±10%
Test Method
Solder the capacitor on the test jig (glass epoxy board) in the
same manner and under the same conditions as (10).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should
be traversed in approximately 1 minute. This motion should be
applied for a period of 2 hours in each of 3 mutually
perpendicular directions (total of 6 hours).
Solder the capacitor on the test jig (glass epoxy board) shown
in Fig. 2a using an eutectic solder. Then apply a force in the
direction shown in Fig. 3a for 5±1 sec. The soldering should be
done by the reflow method and should be conducted with care
so that the soldering is uniform and free of defects such as heat
shock.
SW¤¨¥T­©\X,Q¢RU£¦¤§SVªYZ«W¨
VZ§«
[¬_`°±®]¯^
No.
(Note1) This Specifications and Test Methods indicates typical inspection.
Please refer to individual specifications (our product specifications or the approval sheet).
In case Non "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (1).
In case "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (2).
b
40
φ4.5
c
20
12 Deflection
50 Pressurizing
speed : 1.0mm/sec.
Pressurize
R230
a
100
Fig. 2a
t: 1.6mm (GRM02/03/15: t: 0.8mm)
Flexure : V1
Capacitance meter
45
45
Fig. 3a
Type
GRM02
GRM03
GRM15
GRM18
GRM21
GRM31
GRM32
GRM43
GRM55
a
0.2
0.3
0.4
1.0
1.2
2.2
2.2
3.5
4.5
b
0.56
0.9
1.5
3.0
4.0
5.0
5.0
7.0
8.0
c
0.23
0.3
0.5
1.2
1.65
2.0
2.9
3.7
5.6
(in mm)
13
Solderability of
Termination
75% of the terminations are to be soldered evenly and
continuously.
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion).
Preheat at 80 to 120°C for 10 to 30 seconds.
After preheating, immerse in an eutectic solder solution for
2±0.5 seconds at 230±5°C or Sn-3.0Ag-0.5Cu solder solution
for 2±0.5 seconds at 245±5°C.
Continued on the following page.
53
1
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
GRM Series
Specifications
andMethods
Test Methods
(1) (Note1)
Typical
Inspection
GRM Series
Specifications
and Test
(1) (Note1)
Typical
Inspection
Continued from the preceding page.
No.
Item
(Note1) This Specifications and Test Methods indicates typical inspection.
Please refer to individual specifications (our product specifications or the approval sheet).
In case Non "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (1).
In case "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (2).
Specifications
Temperature
High Dielectric Type
Compensating Type
Test Method
The measured and observed characteristics should satisfy the
specifications in the following table.
Appearance
No defects or abnormalities
Capacitance
Change
Within ±2.5% or ±0.25pF
(Whichever is larger)
Resistance
to
14
Soldering
Heat
Q/D.F.
30pF and over: QU1000
30pF and below:
QU400+20C
C: Nominal Capacitance (pF)
B1, B3, R1, R6, R7, C8
: Within ±7.5%
F1, F5, E4: Within ±20%
[B1, B3, R6, R7, C8]
W.V.: 100V
: 0.025 max. (CF0.068µF)
: 0.05 max. (CU0.068µF)
W.V.: 50/35/25V:
: 0.025 max.*
*GRM32D R7/R6/C8 1E106: 0.035 max.
W.V.: 16/10V: 0.035 max.
W.V.: 6.3/4V
: 0.05 max. (CF3.3µF)
: 0.1 max. (CU3.3µF)
[E4]
W.V.: 25Vmin: 0.025 max.
[F1, F5]
W.V.: 25V min.
: 0.05 max. (CF0.1µF)
: 0.09 max. (CU0.1µF)
W.V.: 16/10V: 0.125 max.
W.V.: 6.3V: 0.15 max.
I.R.
More than 10,000MΩ or 500Ω · F (Whichever is smaller)
Dielectric
Strength
No defects
Preheat the capacitor at 120 to 150°C for 1 minute.
Immerse the capacitor in an eutectic solder or Sn-3.0Ag-0.5Cu
solder solution at 270±5°C for 10±0.5 seconds. Set at room
temperature for 24±2 hours, then measure.
•Initial measurement for high dielectric constant type
Perform a heat treatment at 150+0/–10°C for one hour and
then set at room temperature for 24±2 hours.
Perform the initial measurement.
•Preheating for GRM32/43/55
Step
1
2
Temperature
100 to 120°C
170 to 200°C
Time
1 min.
1 min.
The measured and observed characteristics should satisfy the
specifications in the following table.
Appearance
No defects or abnormalities
Capacitance
Change
Within ±2.5% or ±0.25pF
(Whichever is larger)
Temperature
15
Cycle
Q/D.F.
30pF and over: QU1000
30pF and below:
QU400+20C
C: Nominal Capacitance (pF)
B1, B3, R1, R6, R7, C8
: Within ±7.5%
F1, F5, E4: Within ±20%
[B1, B3, R6, R7, C8]
W.V.: 100V
: 0.025 max. (CF0.068µF)
: 0.05 max. (CU0.068µF)
W.V.: 50/35/25V:
: 0.025 max.*
*GRM32D R7/R6/C8 1E106: 0.035 max.
W.V.: 16/10V: 0.035 max.
W.V.: 6.3/4V
: 0.05 max. (CF3.3µF)
: 0.1 max. (CU3.3µF)
[E4]
W.V.: 25Vmin: 0.05 max.
[F1, F5]
W.V.: 25V min.
: 0.05 max. (CF0.1µF)
: 0.09 max. (CU0.1µF)
W.V.: 16/10V: 0.125 max.
W.V.: 6.3V: 0.15 max.
I.R.
More than 10,000MΩ or 500Ω · F (Whichever is smaller)
Dielectric
Strength
No defects
Fix the capacitor to the supporting jig in the same
manner and under the same conditions as (10).
Perform the five cycles according to the four heat treatments
shown in the following table.
Set for 24±2 hours at room temperature, then measure.
Step
1
2
3
4
Min.
Max.
Room
Room
Temp. (°C) Operating
Operating
Temp.
Temp.
Temp. +0/–3
Temp. +3/–0
Time (min.)
2 to 3
2 to 3
30±3
30±3
•Initial measurement for high dielectric constant type
Perform a heat treatment at 150+0/–10°C for one hour and
then set at room temperature for 24±2 hours.
Perform the initial measurement.
Continued on the following page.
54
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GRM Series
Specifications
and Test
(1) (Note1)
Typical
Inspection
GRM Series
Specifications
andMethods
Test Methods
(1) (Note1)
Typical
Inspection
Continued from the preceding page.
No.
Item
(Note1) This Specifications and Test Methods indicates typical inspection.
Please refer to individual specifications (our product specifications or the approval sheet).
In case Non "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (1).
In case "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (2).
Specifications
Temperature
High Dielectric Type
Compensating Type
Test Method
The measured and observed characteristics should satisfy the
specifications in the following table.
Appearance
No defects or abnormalities
Capacitance
Change
Within ±5% or ±0.5pF
(Whichever is larger)
Humidity
16 (Steady
State)
Q/D.F.
30pF and over: QU350
10pF and over
30pF and below:
QU275+2.5C
10pF and below:
QU200+10C
C: Nominal Capacitance (pF)
I.R.
B1, B3, R1, R6, R7, C8
: Within ±12.5%
F1, F5, E4: Within ±30%
[R6, R7, C8]
W.V.: 100V
: 0.05 max. (CF0.068µF)
: 0.075 max. (CU0.068µF)
W.V.: 50/35/25/16/10V
: 0.05 max.
W.V.: 6.3/4V
: 0.075 max. (CF3.3µF)
: 0.125 max. (CU3.3µF)
[E4]
W.V.: 25Vmin: 0.05 max.
[F1, F5]
W.V.: 25V min.
: 0.075 max. (CF0.1µF)
: 0.125 max. (CU0.1µF)
W.V.: 16/10V: 0.15 max.
W.V.: 6.3V: 0.2 max.
Set the capacitor at 40±2°C and in 90 to 95% humidity for
500±12 hours.
Remove and set for 24±2 hours at room temperature, then
measure.
More than 1,000MΩ or 50Ω · F (Whichever is smaller)
The measured and observed characteristics should satisfy the
specifications in the following table.
17
Appearance
No defects or abnormalities
Capacitance
Change
Within ±7.5% or ±0.75pF
(Whichever is larger)
Humidity
Load
Q/D.F.
30pF and over: QU200
30pF and below:
QU100+10C/3
C: Nominal Capacitance (pF)
I.R.
B1, B3, R1, R6, R7, C8
: Within ±12.5%
F1, F5, E4: Within ±30%
[W.V.: 10V max.]
F1, F5: Within +30/–40%
[B1, B3, R6, R7, C8]
W.V.: 100V
: 0.05 max. (CF0.068µF)
: 0.075 max. (CU0.068µF)
W.V.: 50/35/25/16/10V
: 0.05 max.
W.V.: 6.3/4V
: 0.075 max. (CF3.3µF)
: 0.125 max. (CU3.3µF)
[E4]
W.V.: 25Vmin: 0.05 max.
[F1, F5]
W.V.: 25V min.
: 0.075 max. (CF0.1µF)
: 0.125 max. (CU0.1µF)
W.V.: 16/10V: 0.15 max.
W.V.: 6.3V: 0.2 max.
Apply the rated voltage at 40±2°C and 90 to 95% humidity for
500±12 hours. Remove and set for 24±2 hours at room
temperature, then measure.
The charge/discharge current is less than 50mA.
•Initial measurement for F1, F5/10V max.
Apply the rated DC voltage for 1 hour at 40±2°C.
Remove and set for 24±2 hours at room temperature.
Perform initial measurement.
More than 500MΩ or 25Ω · F (Whichever is smaller)
Continued on the following page.
55
1
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
GRM Series
Specifications
andMethods
Test Methods
(1) (Note1)
Typical
Inspection
GRM Series
Specifications
and Test
(1) (Note1)
Typical
Inspection
Continued from the preceding page.
No.
(Note1) This Specifications and Test Methods indicates typical inspection.
Please refer to individual specifications (our product specifications or the approval sheet).
In case Non "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (1).
In case "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (2).
Specifications
Temperature
High Dielectric Type
Compensating Type
Item
Test Method
The measured and observed characteristics should satisfy the
specifications in the following table.
Appearance
Capacitance
Change
High
18 Temperature
Load
Q/D.F.
No defects or abnormalities
Within ±3% or ±0.3pF
(Whichever is larger)
30pF and over: QU350
10pF and over
30pF and below:
QU275+2.5C
10pF and below:
QU200+10C
C: Nominal Capacitance (pF)
I.R.
B1, B3, R1, R6, R7, C8
: Within ±12.5%
F1, F5, E4: Within ±30%
[Except 10V max. and.
CU1.0µF]
F1, F5: Within +30/–40%
[10V max. and CU1.0µF]
[B1, B3, R6, R7, C8]
W.V.: 100V
: 0.05 max. (CF0.068µF)
: 0.075 max. (CU0.068µF)
W.V.: 50/35/25/16/10V
: 0.05 max.
W.V.: 6.3/4V
: 0.075 max. (CF3.3µF)
: 0.125 max. (CU3.3µF)
[E4]
W.V.: 25Vmin: 0.05 max.
[F1, F5]
W.V.: 25V min.
: 0.075 max.(CF0.1µF)
: 0.125 max.(CU0.1µF)
W.V.: 16/10V: 0.15 max.
W.V.: 6.3V: 0.2 max.
Apply 200%* of the rated voltage at the maximum operating
temperature ±3°C for 1000±12 hours.
Set for 24±2 hours at room temperature, then measure.
The charge/discharge current is less than 50mA.
•Initial measurement for high dielectric constant type.
Apply 200% of the rated voltage* at the maximum operating
temperature ±3°C for one hour. Remove and set for 24±2
hours at room temperature.
Perform initial measurement.
*GRM155C81E 683/104, GRM21BR71H105,
GRM21BR72A474, GRM21BR71C225,
GRM31CR71H475, GRM32E R6/R7 YA106,
GRM32D R7/R6/C8 1E106: 150% of the rated voltage.
More than 1,000MΩ or 50Ω · F (Whichever is smaller)
Table A-1
(1)
Char.
5C
6C
6P
6R
6S
6T
7U
1X
Nominal Values (ppm/°C)*1
0± 30
0± 60
–150± 60
–220± 60
–330± 60
–470± 60
–750±120
+350 to –1000
–55
Max.
0.58
0.87
2.33
3.02
4.09
5.46
8.78
–
Min.
–0.24
–0.48
0.72
1.28
2.16
3.28
5.04
–
Capacitance Change from 25°C (%)
–30
Max.
Min.
0.40
–0.17
0.59
–0.33
1.61
0.50
2.08
0.88
2.81
1.49
3.75
2.26
6.04
3.47
–
–
–10
Max.
0.25
0.38
1.02
1.32
1.79
2.39
3.84
–
Min.
–0.11
–0.21
0.32
0.56
0.95
1.44
2.21
–
*1: Nominal values denote the temperature coefficient within a range of 25°C to 125°C (for ∆C)/85°C (for other TC).
(2)
Char.
2C
3C
4C
2P
3P
4P
2R
3R
4R
2S
3S
4S
2T
3T
4T
3U
4U
Nominal Values (ppm/°C)*2
0± 60
0±120
0±250
–150± 60
–150±120
–150±250
–220± 60
–220±120
–220±250
–330± 60
–330±120
–330±250
–470± 60
–470±120
–470±250
–750±120
–750±250
–55
Max.
0.82
1.37
2.56
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Min.
–0.45
–0.90
–1.88
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Capacitance Change from 20°C (%)
–25
Max.
Min.
0.49
–0.27
0.82
–0.54
1.54
–1.13
1.32
0.41
1.65
0.14
2.36
–0.45
1.70
0.72
2.03
0.45
2.74
–0.14
2.30
1.22
2.63
0.95
3.35
0.36
3.07
1.85
3.40
1.58
4.12
0.99
4.94
2.84
5.65
2.25
*2: Nominal values denote the temperature coefficient within a range of 20°C to 125°C (for ∆C)/85°C (for other TC).
56
–10
Max.
0.33
0.55
1.02
0.88
1.10
1.57
1.13
1.35
1.83
1.54
1.76
2.23
2.05
2.27
2.74
3.29
3.77
Min.
–0.18
–0.36
–0.75
0.27
0.09
–0.30
0.48
0.30
–0.09
0.81
0.63
0.24
1.23
1.05
0.66
1.89
1.50
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GRM Series
Specifications
and Test
(2) (Note1)
Typical
Inspection
GRM Series
Specifications
andMethods
Test Methods
(2) (Note1)
Typical
Inspection
(Note1) This Specifications and Test Methods indicates typical inspection.
Please refer to individual specifications (our product specifications or the approval sheet).
In case Non "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (1).
In case "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (2).
No.
1
Item
Operating
Temperature
Range
Specifications
Test Method
B1, B3, F1: –25 to +85°C
R1, R7, C7, D7, E7: –55 to +125°C
C6, R6: –55 to +85°C
F5: –30 to +85°C
C8, D8: –55 to +105°C,
Reference temperature: 25°C
(B1, B3, R1, F1: 20°C)
2
Rated Voltage
See the previous pages.
The rated voltage is defined as the maximum voltage which
may be applied continuously to the capacitor.
When AC voltage is superimposed on DC voltage, VP-P or VO-P,
whichever is larger, should be maintained within the rated
voltage range.
3
Appearance
No defects or abnormalities
Visual inspection
4
Dimensions
Within the specified dimensions
Using calipers (GRM02 size is based on Microscope)
5
Dielectric Strength
No defects or abnormalities
No failure should be observed when 250% of the rated voltage
is applied between the terminations for 1 to 5 seconds,
provided the charge/discharge current is less than 50mA.
6
Insulation
Resistance
More than 50Ω · F
The insulation resistance should be measured with a DC voltage
not exceeding the rated voltage at reference temperature and
75%RH max. and within 1 minutes of charging, provided the
charge/discharge current is less than 50mA.
Capacitance
Within the specified tolerance
*Table 1
GRM155
B3/R6
GRM185
B3/R6
GRM185
C8/D7
GRM188
B3/R6
GRM188
R7/C8
GRM188
B3/R6
GRM219
B3/R6
GRM219
C8
GRM21B B3/R6
GRM21B R7/C8
GRM319
B3/R6
7
8
Dissipation Factor
(D.F.)
No bias
1A
124 to 105
1C/1A
105
1A
105
1C/1A
225
1A
225
1A
335
1C/1A 475, 106
1A
475
1C/1A
106
1A
106
1C/1A
106
B1, B3, R1, R6*, R7*, C7, C8, E7, D7: 0.1 max.
C6: 0.125 max.
D8: 0.15 max.
F1, F5: 0.2 max.
*GRM31CR71E106: 0.125 max.
GRM31CR6 0J/0G 107: 0.15 max.
B1, B3
F1
R6
R1, R7
F5
C6
C7
C8
D7
E7
D8
: Within ±10% (–25 to +85°C)
: Within +30/–80% (–25 to +85°C)
: Within ±15% (–55 to +85°C)
: Within ±15% (–55 to +125°C)
: Within +22/–82% (–30 to +85°C)
: Within ±22% (–55 to +85°C)
: Within ±22% (–55 to +125°C)
: Within ±22% (–55 to +105°C)
: Within +22/–33% (–55 to +125°C)
: Within +22/–56% (–55 to +125°C)
: Within +22/–33% (–55 to +105°C)
The capacitance/D.F. should be measured at reference
temperature at the measuring frequency and voltage shown in
the table.
Nominal Capacitance Measuring Frequency Measuring Voltage
CV10µF (10V min.)*
1±0.1kHz
1.0±0.2Vrms
CV10µF (6.3V max.)
1±0.1kHz
0.5±0.1Vrms
CG10µF
120±24Hz
0.5±0.1Vrms
*For items in Table1
1±0.1kHz
0.5±0.1Vrms
GRM188C80E106:
Perform a heat treatment at 150+0/-10°C for one hour and then
set for 24±2 hours at room temperature.
The capacitance change should be measured after 5 min. at
each specified temp. stage.
The ranges of capacitance change compared with the
reference temperature value over the temperature ranges
shown in the table should be within the specified ranges.*
In case of applying voltage, the capacitance change should be
measured after 1 more min. with applying voltage in
equilibration of each temp. stage.
*GRM32DR60J226, GRM43 B1/B3/R6 0J/1A 336/476 only: 1.0±0.2Vrms
Step
1
9
2
Capacitance
Temperature
Characteristics
3
4
50% of
B1: Within +10/–30%
the Rated R1: Within +15/–40%
Voltage
F1: Within +30/–95%
5
6
7
8
Temperature (°C)
Applying Voltage (V)
25±2 (for R6, R7, C6, C7, C8, D7, D8, E7, F5)
20±2 (for B1, B3, F1, R1)
–55±3 (for R1, R6, R7, C6, C7, C8, D7, D8, E7)
–30±3 (for F5)
–25±3 (for B1, B3, F1)
No bias
25±2 (for R6, R7, C6, C7, C8, D7, D8, E7, F5)
20±2 (for B1, B3, F1, R1)
125±3 (for R1, R7, C7, D7, E7)
105±3 (for C8, D8)
85±3 (for B1, B3, F1, F5, R6, C6)
20±2 (for B1, F1, R1)
–55±3 (for R1)
–25±3 (for B1, F1)
50% of the
rated voltage
20±2 (for B1, F1, R1)
125±3 (for R1)
85±3 (for B1, F1)
•Initial measurement for high dielectric constant type
Perform a heat treatment at 150 +0/–10°C for one hour and
then set for 24±2 hours at room temperature.
Perform the initial measurement.
Continued on the following page.
57
1
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GRM Series
Specifications
andMethods
Test Methods
(2) (Note1)
Typical
Inspection
GRM Series
Specifications
and Test
(2) (Note1)
Typical
Inspection
Continued from the preceding page.
No.
(Note1) This Specifications and Test Methods indicates typical inspection.
Please refer to individual specifications (our product specifications or the approval sheet).
In case Non "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (1).
In case "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (2).
Item
Specifications
Test Method
No removal of the terminations or other defects should occur.
c
Adhesive Strength
of Termination
a
10
b
Solder resist
Baked electrode or
copper foil
Fig. 1a
Appearance
No defects or abnormalities
Capacitance
Within the specified tolerance
D.F.
B1, B3, R1, R6*, R7*, C7, C8, E7, D7: 0.1 max.
C6: 0.125 max.
D8: 0.15 max.
F1, F5: 0.2 max.
*GRM31CR71E106: 0.125 max.
GRM31CR6 0J/0G 107: 0.15 max.
Appearance
No marking defects
Capacitance
Change
Within ±10%
11 Vibration
Solder the capacitor on the test jig (glass epoxy board) shown
in Fig. 1a using an eutectic solder. Then apply 10N* force in
parallel with the test jig for 10±1sec.
The soldering should be done either with an iron or using the
reflow method and should be conducted with care so that the
soldering is uniform and free of defects such as heat shock.
*1N: GRM02, 2N: GRM03, 5N: GRM15/GRM18
Type
GRM02
GRM03
GRM15
GRM18
GRM21
GRM31
GRM32
GRM43
GRM55
a
0.2
0.3
0.4
1.0
1.2
2.2
2.2
3.5
4.5
b
0.56
0.9
1.5
3.0
4.0
5.0
5.0
7.0
8.0
c
0.23
0.3
0.5
1.2
1.65
2.0
2.9
3.7
5.6
Solder the capacitor on the test jig (glass epoxy board) in the
same manner and under the same conditions as (10).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should
be traversed in approximately 1 minute. This motion should be
applied for a period of 2 hours in each of 3 mutually
perpendicular directions (total of 6 hours).
Solder the capacitor on the test jig (glass epoxy board) shown
in Fig. 2a using an eutectic solder. Then apply a force in the
direction shown in Fig. 3a for 5±1 sec. The soldering should be
done by the reflow method and should be conducted with care
so that the soldering is uniform and free of defects such as heat
shock.
£
W
T
S
R
¨
¥
¤
[\`¬­±]^®¯°_¥T©X¦,QU¢VZ§«®ª]Y^¯¢Q,
b
ø4.5
20
c
50 Pressurizing
speed : 1.0mm/sec.
Pressurize
R230
40
1
a
100
12 Deflection
t: 1.6mm
Fig. 2a
Flexure : V1
Capacitance meter
45
45
Fig.3a
(GRM02/03/15: t: 0.8mm)
Type
GRM02
GRM03
GRM15
GRM18
GRM21
GRM31
GRM32
GRM43
GRM55
a
0.2
0.3
0.4
1.0
1.2
2.2
2.2
3.5
4.5
b
0.56
0.9
1.5
3.0
4.0
5.0
5.0
7.0
8.0
c
0.23
0.3
0.5
1.2
1.65
2.0
2.9
3.7
5.6
(in mm)
13
Solderability of
Termination
75% of the terminations is to be soldered evenly and
continuously.
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion).
Preheat at 80 to 120°C for 10 to 30 seconds.
After preheating, immerse in an eutectic solder solution for
2±0.5 seconds at 230±5°C or Sn-3.0Ag-0.5Cu solder solution
for 2±0.5 seconds at 245±5°C.
Continued on the following page.
58
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GRM Series
Specifications
and Test
(2) (Note1)
Typical
Inspection
GRM Series
Specifications
andMethods
Test Methods
(2) (Note1)
Typical
Inspection
Continued from the preceding page.
No.
14
Item
High
Temperature
16 High
Humidity
(Steady)
17 Durability
Specifications
Appearance
No defects or abnormalities
Capacitance
Change
B1, B3, R1, R6*, R7, C6, C7, C8*, E7, D7, D8: Within ±7.5%
F1, F5: Within ±20%
*GRM188R6 0J/0G 106, GRM188C80E106, GRM219R60G226: within ±12.5%
GRM155R60G475: Within ±15%
Resistance
to
Soldering
D.F.
Heat
Temperature
15 Sudden
Change
(Note1) This Specifications and Test Methods indicates typical inspection.
Please refer to individual specifications (our product specifications or the approval sheet).
In case Non "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (1).
In case "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (2).
B1, B3, R1, R6*, R7*, C7, C8, E7, D7: 0.1 max.
C6: 0.125 max.
D8: 0.15 max.
F1, F5: 0.2 max.
*GRM31CR71E106: 0.125 max.
GRM31CR6 0J/0G 107: 0.15 max.
Test Method
Preheat the capacitor at 120 to 150°C for 1 minute.
Immerse the capacitor in an eutectic solder* or Sn-3.0Ag-0.5Cu
solder solution at 270±5°C for 10±0.5 seconds. Set at room
temperature for 24±2 hours, then measure.
*Do not apply to GRM02.
•Initial measurement for high dielectric constant type
Perform a heat treatment at 150+0/–10°C for one hour and
then set at room temperature for 24±2 hours.
Perform the initial measurement.
*Preheating for GRM32/43/55
Step
1
2
Temperature
100 to 120°C
170 to 200°C
Time
1 min.
1 min.
I.R.
More than 50Ω · F
Dielectric
Strength
No defects
Appearance
No defects or abnormalities
Capacitance
Change
B1, B3, R1, R6, R7, C6, C7, C8, D7, D8: Within ±7.5%
E7: Within ±30%
F1, F5: Within ±20%
D.F.
B1, B3, R1, R6*, R7*, C7, C8, E7, D7: 0.1 max.
C6: 0.125 max.
D8: 0.15 max.
F1, F5: 0.2 max.
*GRM31CR71E106: 0.125 max.
GRM31CR6 0J/0G 107: 0.15 max.
I.R.
More than 50Ω · F
Dielectric
Strength
No defects
Appearance
No defects or abnormalities
Capacitance
Change
B1, B3, R1, R6, R7, C6, C7, C8, E7, D7, D8: Within ±12.5%
F1, F5: Within ±30%
D.F.
B1, B3, R1, R6, R7, C6, C7, C8, E7, D7, D8: 0.2 max.
F1, F5: 0.4 max.
I.R.
More than 12.5Ω · F
Appearance
No defects or abnormalities
Capacitance
Change
B1, B3, R1, R6*, R7, C6, C7, C8*, E7, D7, D8: Within ±12.5%
F1, F5: Within ±30%
*GRM188C80E106, GRM219R60G226: within ±15%
D.F.
B1, B3, R1, R6, R7, C6, C7, C8, E7, D7, D8: 0.2 max.
F1, F5: 0.4 max.
•Initial measurement
Perform a heat treatment at 150+0/–10°C for one hour and
then let sit for 24±2 hours at room temperature. Perform the
initial measurement.
I.R.
More than 25Ω · F
•Measurement after test
Perform a heat treatment at 150+0/–10°C for one hour and
then let sit for 24±2 hours at room temperature, then measure.
Fix the capacitor to the supporting jig in the same manner and
under the same conditions as (10).
Perform the five cycles according to the four heat treatments
shown in the following table.
Set for 24±2 hours at room temperature, then measure.
Step
1
2
3
4
Min.
Max.
Room
Room
Temp. (°C) Operating
Operating
Temp.
Temp.
Temp. +0/–3
Temp. +3/–0
Time (min.)
2 to 3
2 to 3
30±3
30±3
•Initial measurement for high dielectric constant type
Perform a heat treatment at 150+0/–10°C for one hour and
then set at room temperature for 24±2 hours.
Perform the initial measurement.
GRM188R60J106 only Measurement after test Perform a heat
treatment and then let sit for 24±2 hours at room temperature,
then measure.
Apply the rated voltage at 40±2°C and 90 to 95% humidity for
500±12 hours. The charge/discharge current is less than 50mA.
•Initial measurement
Perform a heat treatment at 150+0/–10°C for one hour and
then let sit for 24±2 hours at room temperature. Perform the
initial measurement.
•Measurement after test
Perform a heat treatment at 150+0/–10°C for one hour and
then let sit for 24±2 hours at room temperature, then measure.
Apply 150% of the rated voltage for 1000±12 hours at the
maximum operating temperature ±3°C. Let sit for 24±2 hours at
room temperature, then measure.
The charge/discharge current is less than 50mA.
59
1
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GRM Series Data
■ Capacitance - Temperature Characteristics
Measuring condition: 5C ··· 1MHz, R∆ ··· 1kHz
20
5C
R6
R7
10
Capacitance Change (%)
15
Capacitance Change (%)
■ Capacitance Change - Aging
Measuring condition: 5C ··· 1MHz, R∆ ··· 1kHz
20
10
5
0
-5
-10
0
-10
-20
5C
R∆
-30
-15
-20
-60
-40
-40
-20
0
20
40
60
Temperature (°C)
80
100
120
10
140
100
1000
10000
Time (Hr)
■ Impedance - Frequency Characteristics
5C: GRM15
R∆: GRM15
100
100
10
Impedance (Ω)
Impedance (Ω)
10
1
1pF
10pF
1
1000pF
0.1
0.01µF
100pF
0.1
0.01
0.1µF
1000pF
0.01
1
10
100
Frequency (MHz)
1000
10000
10
100
0.001
0.1
1
10
Frequency (MHz)
100
1000
R∆
100
GRM15 1µF
10
Impedance (Ω)
1
1
GRM18 10µF
0.1
0.01
0.001
0.01
GRM31 100µF
0.1
1
Frequency (MHz)
The data herein are given in typical values, not guaranteed ratings.
Please refer to our Web site or contact our sales representatives for individual Part Number's data.
Our Web Site: http://www.murata.com/products/capacitor/tech_data/index.html
60
Continued on the following page.
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GRM Series Data
GRM Series Data
Continued from the preceding page.
■ Capacitance - DC Voltage Characteristics
Temperature Compensating Type: GRM1555C1H102JA01
High Dielectric Constant Type: GRM155R71E103KA01
Measuring condition: 1MHz
20
0
Capacitance Change (%)
Capacitance Change (%)
0
-20
-40
-60
-80
-40
-60
-100
0
10
20
30
40
DC Voltage (VDC)
50
60
High Dielectric Constant Type: GRM155R71C104KA88
0
2
4
6
8
10 12 14 16
DC Voltage (VDC)
18
20
22
24
26
High Dielectric Constant Type: GRM155R61A105KE15
Measuring condition: 1kHz
20
Measuring condition: 1kHz
20
0
0
Capacitance Change (%)
Capacitance Change (%)
-20
-80
-100
-20
-40
-60
-20
-40
-60
-80
-80
-100
-100
0
2
4
6
8
10
12
DC Voltage (VDC)
14
16
18
High Dielectric Constant Type: GRM188R60J106ME47
0
1
2
3
4
5
6
7
DC Voltage (VDC)
8
9
10
11
High Dielectric Constant Type: GRM31CR60J107ME39
Measuring condition: 1kHz
20
Measuring condition: 120Hz
20
0
Capacitance Change (%)
0
Capacitance Change (%)
Measuring condition: 1kHz
20
-20
-40
-60
-80
-20
-40
-60
-80
-100
-100
0
1
2
3
4
DC Voltage (VDC)
5
6
7
The data herein are given in typical values, not guaranteed ratings.
Please refer to our Web site or contact our sales representatives for individual Part Number's data.
Our Web Site: http://www.murata.com/products/capacitor/tech_data/index.html
0
1
2
3
4
DC Voltage (VDC)
5
6
7
Continued on the following page.
61
1
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GRM Series Data
Continued from the preceding page.
■ Capacitance - AC Voltage Characteristics
Temperature Compensating Type: GRM1555C1H102JA01
10
Capacitance Change (%)
Capacitance Change (%)
20
10
0
-10
-20
-30
-20
-30
-40
-50
-50
1.0
1.5
AC Voltage (Vr.m.s.)
2.0
-60
0.0
2.5
High Dielectric Constant Type: GRM155R71C104KA88
10
Capacitance Change (%)
20
10
-10
-20
-30
-30
-50
2.0
-60
0.0
2.5
High Dielectric Constant Type: GRM188R60J106ME47
10
Capacitance Change (%)
20
10
-10
-20
-30
-20
-30
-40
-50
1.0
1.5
AC Voltage (Vr.m.s.)
2.0
2.5
The data herein are given in typical values, not guaranteed ratings.
Please refer to our Web site or contact our sales representatives for individual Part Number's data.
Our Web Site: http://www.murata.com/products/capacitor/tech_data/index.html
2.5
0
-50
0.5
2.0
-10
-40
-60
0.0
1.0
1.5
AC Voltage (Vr.m.s.)
Measuring condition: 120Hz
30
20
0
0.5
High Dielectric Constant Type: GRM31CR60J107ME39
Measuring condition: 1kHz
30
Measuring condition: 1kHz
-20
-40
1.0
1.5
AC Voltage (Vr.m.s.)
2.5
0
-50
0.5
2.0
-10
-40
-60
0.0
1.0
1.5
AC Voltage (Vr.m.s.)
30
20
0
0.5
High Dielectric Constant Type: GRM155R61A105KE15
Measuring condition: 1kHz
30
Capacitance Change (%)
0
-10
-40
0.5
Measuring condition: 1kHz
30
20
-60
0.0
62
High Dielectric Constant Type: GRM155R71E103KA01
Measuring condition: 1MHz
30
Capacitance Change (%)
1
-60
0.0
0.5
1.0
1.5
AC Voltage (Vr.m.s.)
2.0
2.5
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Monolithic Ceramic Capacitors
Capacitor Array GNM Series
2
■ Features
1. High density mounting due to mounting space saving
2. Mounting cost saving
■ Applications
General electronic equipment
GNM0M2/1M2/212
P
L
Part Number
GNM0M2
GNM1M2
GNM212
T
T
GNM214/314
P
W
Dimensions (mm)
W
T
P
L
0.6 ±0.05
0.45 ±0.05
0.45 ±0.05
0.9 ±0.05
0.5 +0.05/-0.10
0.6 ±0.1
0.64 ±0.05
1.37 ±0.15 1.0 ±0.15
0.8 +0/-0.15
0.6 ±0.1
1.0 ±0.1
2.0 ±0.15 1.25 ±0.15
0.85 ±0.1
L
Part Number
L
GNM214
2.0 ±0.15
GNM314
3.2 ±0.15
Dimensions (mm)
W
T
0.5 +0.05/-0.1
1.25 ±0.15
0.6 ±0.1
0.85 ±0.1
0.8 ±0.1
0.85 ±0.1
1.6 ±0.15
1.0 ±0.1
1.15 ±0.1
W
P
0.5 ±0.05
0.8 ±0.1
Capacitance Table
Temperature Compensating Type C0G(5C) Characteristics
0.6
ex.0.6: T Dimension [mm]
LxW 1.37x1.0 2.0x1.25
(1M) (21)
[mm] <0504> <0805>
3.2x1.6
(31)
<1206>
4(4)
Number of Elements
2(2)
Rated Voltage
[Vdc]
50
(1H)
50
(1H)
100
(2A)
50
(1H)
10pF(100)
0.6
0.6
0.8
0.8
15pF(150)
0.6
0.6
0.8
0.8
22pF(220)
0.6
0.6
0.8
0.8
33pF(330)
0.6
0.6
0.8
0.8
47pF(470)
0.6
0.6
0.8
0.8
Capacitance
68pF(680)
0.6
0.6
0.8
0.8
100pF(101)
0.6
0.6
0.8
0.8
150pF(151)
0.6
0.6
0.8
0.8
220pF(221)
0.6
0.6
330pF(331)
0.8
0.8
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
Continued on the following page.
63
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
Continued from the preceding page.
2
High Dielectric Constant Type X7R(R7)/X7S(C7) Characteristics
0.6
ex.0.6: T Dimension [mm]
1.37x1.0
(1M)
<0504>
2(2)
LxW
[mm]
Number of Elements
Rated Voltage
[Vdc]
50
(1H)
25
(1E)
16
(1C)
TC
X7R
(R7)
X7R
(R7)
X7R
(R7)
Capacitance
4(4)
10
(1A)
X7R
(R7)
X7S
(C7)
470pF(471)
1000pF(102)
3.2x1.6
(31)
<1206>
2.0x1.25
(21)
<0805>
50
(1H)
25
(1E)
16
(1C)
50
(1H)
25
(1E)
16
(1C)
6.3
(0J)
X7R
(R7)
X7R
(R7)
X7R
(R7)
X7R
(R7)
X7R
(R7)
X7R
(R7)
X7R
(R7)
0.6
0.6
0.6
2200pF(222)
0.6
0.6
4700pF(472)
0.6
0.6
10000pF(103)
0.6
0.6
22000pF(223)
0.6
0.6
47000pF(473)
0.6
0.6
0.10µF(104)
0.6
0.85
0.6
0.85
0.85
0.85
0.85
1.0
1.0
0.85
1.0µF(105)
1.15
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
High Dielectric Constant Type X5R(R6) Characteristics
0.6
ex.0.6: T Dimension [mm]
0.9x0.6
(0M)
<0302>
LxW
[mm]
1.37x1.0
(1M)
<0504>
2(2)
Number of Elements
2.0x1.25
(21)
<0805>
4(4)
Rated Voltage
[Vdc]
16
(1C)
10
(1A)
6.3
(0J)
4
(0G)
50
(1H)
25
(1E)
16
(1C)
10
(1A)
6.3
(0J)
16
(1C)
10
(1A)
6.3
(0J)
10
(1A)
6.3
(0J)
16
(1C)
10
(1A)
TC
X5R
(R6)
X5R
(R6)
X5R
(R6)
X5R
(R6)
X5R
(R6)
X5R
(R6)
X5R
(R6)
X5R
(R6)
X5R
(R6)
X5R
(R6)
X5R
(R6)
X5R
(R6)
X5R
(R6)
X5R
(R6)
X5R
(R6)
X5R
(R6)
0.85
0.85
0.85
0.85
Capacitance
1000pF(102)
0.6
2200pF(222)
0.6
4700pF(472)
0.6
10000pF(103)
0.45
0.45
0.45
22000pF(223)
0.45
0.45
0.45
0.6
0.6
47000pF(473)
0.45
0.45
0.45
0.6
0.6
0.10µF(104)
0.45
0.45
0.45
0.6
0.6
0.22µF(224)
0.8
0.47µF(474)
0.85
1.0µF(105)
0.45
0.8
2.2µF(225)
The part number code is shown in ( ) and Unit is shown in [ ].
0.5
ex.0.5: T Dimension [mm]
LxW 1.37x1.0 2.0x1.25
(1M) (21)
[mm] <0504> <0805>
Number of Elements 2(2)
4(4)
Rated Voltage
[Vdc]
16
(1C)
16
(1C)
TC
X7R
(R7)
X7R
(R7)
0.5
0.5
Capacitance
0.10µF(104)
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
0.8
0.8
0.8
0.8
0.85
0.85
0.85
0.85
0.85
< >: EIA [inch] Code
High Dielectric Constant Type X7R(R7) Characteristics Low Profile
64
3.2x1.6
(31)
<1206>
2.0x1.25
(21)
<0805>
High Dielectric Constant Type X5R(R6) Characteristics Low Profile
0.5
ex.0.5: T Dimension [mm]
LxW
[mm]
Number of Elements
1.37x1.0
(1M)
<0504>
2(2)
2.0x1.25
(21)
<0805>
4(4)
Rated Voltage
[Vdc]
16
(1C)
10
(1A)
16
(1C)
TC
X5R
(R6)
X5R
(R6)
X5R
(R6)
0.5
0.5
0.5
Capacitance
1.0µF(105)
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Compensating Type C0G(5C) Characteristics
LxW [mm]
1.37x1.0(1M)<0504>
2.0x1.25(21)<0805>
50(1H)
50(1H)
Rated Volt. [Vdc]
Capacitance
3.2x1.6(31)<1206>
100(2A)
Tolerance
2
50(1H)
Part Number
10pF(100)
±10%(K)
GNM1M25C1H100KD01D
GNM2145C1H100KD01D
GNM3145C2A100KD01D
GNM3145C1H100KD01D
15pF(150)
±10%(K)
GNM1M25C1H150KD01D
GNM2145C1H150KD01D
GNM3145C2A150KD01D
GNM3145C1H150KD01D
22pF(220)
±10%(K)
GNM1M25C1H220KD01D
GNM2145C1H220KD01D
GNM3145C2A220KD01D
GNM3145C1H220KD01D
33pF(330)
±10%(K)
GNM1M25C1H330KD01D
GNM2145C1H330KD01D
GNM3145C2A330KD01D
GNM3145C1H330KD01D
47pF(470)
±10%(K)
GNM1M25C1H470KD01D
GNM2145C1H470KD01D
GNM3145C2A470KD01D
GNM3145C1H470KD01D
68pF(680)
±10%(K)
GNM1M25C1H680KD01D
GNM2145C1H680KD01D
GNM3145C2A680KD01D
GNM3145C1H680KD01D
100pF(101)
±10%(K)
GNM1M25C1H101KD01D
GNM2145C1H101KD01D
GNM3145C2A101KD01D
GNM3145C1H101KD01D
150pF(151)
±10%(K)
GNM1M25C1H151KD01D
GNM2145C1H151KD01D
GNM3145C2A151KD01D
220pF(221)
±10%(K)
GNM1M25C1H221KD01D
GNM2145C1H221KD01D
330pF(331)
±10%(K)
GNM3145C1H151KD01D
GNM3145C1H221KD01D
GNM3145C1H331KD01D
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
High Dielectric Constant Type X7R(R7)/X7S(C7) Characteristics
1.37x1.0(1M)<0504>
LxW [mm]
2(2)
Number of Elements
50(1H)
Rated Volt. [Vdc]
Capacitance
25(1E)
Tolerance
16(1C)
10(1A)
Part Number
1000pF(102)
±20%(M)
2200pF(222)
±20%(M)
GNM1M2R71E222MA01D
GNM1M2R71H102MA01D
4700pF(472)
±20%(M)
GNM1M2R71E472MA01D
10000pF(103)
±20%(M)
GNM1M2R71E103MA01D
22000pF(223)
±20%(M)
GNM1M2R71C223MA01D
GNM1M2R71A223MA01D
47000pF(473)
±20%(M)
GNM1M2R71C473MA01D
GNM1M2R71A473MA01D
0.10µF(104)
±20%(M)
GNM1M2R71C104MA01D
GNM1M2C71A104MA01D
2.0x1.25(21)<0805>
LxW [mm]
4(4)
Number of Elements
50(1H)
Rated Volt. [Vdc]
Capacitance
25(1E)
Tolerance
16(1C)
Part Number
470pF(471)
±20%(M)
GNM214R71H471MA01D
1000pF(102)
±20%(M)
GNM214R71H102MA01D
2200pF(222)
±20%(M)
GNM214R71E222MA01D
4700pF(472)
±20%(M)
GNM214R71E472MA01D
10000pF(103)
±20%(M)
GNM214R71E103MA01D
22000pF(223)
±20%(M)
47000pF(473)
±20%(M)
GNM214R71C473MA01D
0.10µF(104)
±20%(M)
GNM214R71C104MA01D
GNM214R71C223MA01D
3.2x1.6(31)<1206>
LxW [mm]
4(4)
Number of Elements
50(1H)
Rated Volt. [Vdc]
Capacitance
25(1E)
Tolerance
16(1C)
6.3(0J)
Part Number
47000pF(473)
±20%(M)
GNM314R71H473MA11D
0.10µF(104)
±20%(M)
GNM314R71H104MA11D
1.0µF(105)
±20%(M)
GNM314R71C473MA01L
GNM314R71E104MA11D
GNM314R71C104MA01L
GNM314R70J105MA01L
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
*: Please refer to GNM series Specifications and Test Method(2).
qProduct ID
wSeries
tTemperature Characteristics
u i o !0 iCapacitance Tolerance
q w e r t y
Packaging Code in Part Number is a code shows STD 180mm Reel Taping.
(Part Number) GN
M 1M
2
5C 1H
100
K
D01 D
eDimension (LxW)
rNumber of Elements
yRated Voltage
uCapacitance
oIndividual Specification Code !0Packaging
65
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Dielectric Constant Type X5R(R6) Characteristics
2
0.9x0.6(0M)<0302>
LxW [mm]
2(2)
Number of Elements
Rated Volt. [Vdc]
Capacitance
16(1C)
10(1A)
Tolerance
6.3(0J)
4(0G)
Part Number
10000pF(103)
±20%(M)
GNM0M2R61C103ME18D*
GNM0M2R61A103ME17D*
GNM0M2R60J103ME17D*
22000pF(223)
±20%(M)
GNM0M2R61C223ME18D*
GNM0M2R61A223ME17D*
GNM0M2R60J223ME17D*
47000pF(473)
±20%(M)
GNM0M2R61C473ME18D*
GNM0M2R61A473ME17D*
GNM0M2R60J473ME17D*
0.10µF(104)
±20%(M)
GNM0M2R61C104ME18D*
GNM0M2R61A104ME17D*
GNM0M2R60J104ME17D*
1.0µF(105)
±20%(M)
GNM0M2R60G105ME17D*
1.37x1.0(1M)<0504>
LxW [mm]
2(2)
Number of Elements
50(1H)
Rated Volt. [Vdc]
Capacitance
25(1E)
Tolerance
16(1C)
Part Number
1000pF(102)
±20%(M)
2200pF(222)
±20%(M)
GNM1M2R61E222MA01D
4700pF(472)
±20%(M)
GNM1M2R61E472MA01D
10000pF(103)
±20%(M)
GNM1M2R61E103MA01D
22000pF(223)
±20%(M)
47000pF(473)
±20%(M)
GNM1M2R61C473MA01D
0.22µF(224)
±20%(M)
GNM1M2R61C224ME18D*
1.0µF(105)
±20%(M)
GNM1M2R61C105ME18D*
GNM1M2R61H102MA01D
GNM1M2R61C223MA01D
1.37x1.0(1M)<0504>
LxW [mm]
2(2)
Number of Elements
10(1A)
Rated Volt. [Vdc]
Capacitance
Tolerance
6.3(0J)
Part Number
22000pF(223)
±20%(M)
GNM1M2R61A223MA01D
47000pF(473)
±20%(M)
GNM1M2R61A473MA01D
0.10µF(104)
±20%(M)
GNM1M2R61A104MA01D
1.0µF(105)
±20%(M)
GNM1M2R61A105ME17D*
GNM1M2R60J105ME12D*
2.2µF(225)
±20%(M)
GNM1M2R61A225ME18D*
GNM1M2R60J225ME18D*
2.0x1.25(21)<0805>
LxW [mm]
2(2)
Number of Elements
16(1C)
Rated Volt. [Vdc]
Capacitance
10(1A)
Tolerance
6.3(0J)
Part Number
0.47µF(474)
±20%(M)
GNM212R61C474MA16D
1.0µF(105)
±20%(M)
GNM212R61C105MA16D
2.2µF(225)
±20%(M)
GNM212R61A105MA13D
GNM212R61A225ME16D*
GNM212R60J225ME16D*
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
*: Please refer to GNM series Specifications and Test Method(2).
(Part Number) GN
q
M 0M
w
e
2
R6 1C
r t
y
103
M
u
i
E18 D
o
Packaging Code in Part Number is a code shows STD Tray.
66
!0
qProduct ID
wSeries
tTemperature Characteristics
iCapacitance Tolerance
eDimension (LxW)
rNumber of Elements
yRated Voltage
uCapacitance
oIndividual Specification Code !0Packaging
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Dielectric Constant Type X5R(R6) Characteristics
2.0x1.25(21)<0805>
LxW [mm]
10(1A)
Rated Volt. [Vdc]
Capacitance
Tolerance
1.0µF(105)
±20%(M)
2.2µF(225)
±20%(M)
6.3(0J)
Part Number
GNM214R61A105ME17D*
3.2x1.6(31)<1206>
4(4)
Number of Elements
16(1C)
Rated Volt. [Vdc]
1.0µF(105)
GNM214R60J105ME17D*
GNM214R60J225ME18D*
LxW [mm]
Capacitance
2
4(4)
Number of Elements
Tolerance
±20%(M)
10(1A)
Part Number
GNM314R61C105MA15D
GNM314R61A105MA13D
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
*: Please refer to GNM series Specifications and Test Method(2).
High Dielectric Constant Type X7R(R7) Characteristics Low Profile
Number of Elements
Rated Volt. [Vdc]
Capacitance
0.10µF(104)
2.0x1.25(21)<0805>
1.37x1.0(1M)<0504>
LxW [mm]
2(2)
4(4)
16(1C)
16(1C)
Tolerance
±20%(M)
Part Number
GNM1M2R71C104MAA1D
GNM214R71C104MAA1D
High Dielectric Constant Type X5R(R6) Characteristics Low Profile
1.37x1.0(1M)<0504>
LxW [mm]
2(2)
Number of Elements
16(1C)
Rated Volt. [Vdc]
Capacitance
1.0µF(105)
Tolerance
±20%(M)
10(1A)
Part Number
GNM1M2R61C105MEA2D* GNM1M2R61A105MEA4D*
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
*: Please refer to GNM series Specifications and Test Method(2).
67
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GNM Series Specifications and Test Methods (1)
In case Non "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (1).
In case "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (2).
Specifications
No.
1
Item
Operating
Temperature
Range
Test Method
Temperature
Compensating Type
5C: –55 to +125°C
High Dielectric Type
R7, C7: –55 to +125°C
R6: –55 to +85°C
2
Rated Voltage
See the previous pages.
The rated voltage is defined as the maximum voltage which
may be applied continuously to the capacitor.
When AC voltage is superimposed on DC voltage, VP-P or VO-P,
whichever is larger, should be maintained within the rated
voltage range.
3
Appearance
No defects or abnormalities
Visual inspection
4
Dimensions
Within the specified dimensions
Using calipers
5
Dielectric Strength
No defects or abnormalities
No failure should be observed when 300% of the rated voltage
(5C) or 250% of the rated voltage (R7) is applied between the
terminations for 1 to 5 seconds, provided the charge/discharge
current is less than 50mA.
6
Insulation
Resistance
More than 10,000MΩ or 500Ω · F
(Whichever is smaller)
The insulation resistance should be measured with a DC
voltage not exceeding the rated voltage at 25°C and 75%RH
max. and within 2 minutes of charging.
7
Capacitance
Within the specified tolerance
8
Q/
Dissipation Factor
(D.F.)
30pF min.: QU1000
30pF max.:
QU400+20C
C: Nominal
Capacitance (pF)
Char. 25V min. 16V
R7, R6, 0.025 0.035
max.
C7
max.
Char.
R7
Within the
Capacitance
specified tolerance
Change
(Table A)
R6
C7
9
Temperature
Coefficient
Within the
specified tolerance
(Table A)
Capacitance
Drift
Within ±0.2%
or ±0.05pF
(Whichever is
larger.)
Capacitance
Temperature
Characteristics
The capacitance/Q/D.F. should be measured at 25°C at the
frequency and voltage shown in the table.
10V
0.035
max.
6.3V
0.05
max.
Temp. Reference Cap.
Range
Temp.
Change
–55°C
to +125°C
Within
±15%
–55°C
25°C
to +85°C
Within
–55°C
±22%
to +125°C
Char.
Item
Frequency
Voltage
5C
R7
1±0.1MHz
0.5 to 5Vrms
1±0.1kHz
1.0±0.2Vrms
The capacitance change should be measured after 5 min. at
each specified temperature stage.
(1) Temperature Compensating Type
The temperature coefficient is determined using the capacitance measured in step 3 as a reference. When cycling the
temperature sequentially from step1 through 5, the capacitance
should be within the specified tolerance for the temperature
coefficient and capacitance change as Table A.
The capacitance drift is calculated by dividing the differences
between the maximum and minimum measured values in the
steps 1, 3 and 5 by the cap. value in step 3.
Step
1
2
3
4
5
Temperature (°C)
25±2
–55±3 (for 5C/R7/C7), –30±3 (for F5)
25±2
125±3 (for 5C/R7/C7), 85±3 (for F5)
25±2
(2) High Dielectric Constant Type
The ranges of capacitance change compared with the above
25°C value over the temperature ranges shown in the table
should be within the specified ranges.
• Initial measurement for high dielectric constant type.
Perform a heat treatment at 150+0/-10°C for one hour and
then set for 24±2 hours at room temperature.
Perform the initial measurement.
No removal of the terminations or other defect should occur.
GNMpp4
10
GNMpp2
d
Adhesive Strength
of Termination
c
b
a
c
b
a
d
2
Solder resist
Copper foil
Solder resist
Copper foil
Solder the capacitor to the test jig (glass epoxy board) shown in
Fig.1 using a eutectic solder. Then apply 5N force in parallel with
the test jig for 10±1 sec.
The soldering should be done either with an iron or using the
reflow method and should be conducted with care so that the
soldering is uniform and free of defects such as heat shock.
Type
GNM1M2
GNM212
GNM214
GNM314
a
0.5
0.6
0.6
0.8
b
1.6
1.8
2.0
2.5
c
0.32
0.5
0.25
0.4
d
0.32
0.5
0.25
0.4
(in mm)
Fig. 1
Continued on the following page.
68
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GNM Series Specifications and Test
Methods
(1)
GNM
Series Specifications
and Test Methods (1)
In case Non "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (1).
In case "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (2).
Continued from the preceding page.
Specifications
No.
Item
High Dielectric Type
Appearance No defects or abnormalities
Capacitance Within the specified tolerance
11
Vibration
Resistance
Q/D.F.
30pF min.: QU1000
30pF max.:
QU400+20C
Char. 25V min. 16V
R7, R6, 0.025 0.035
max.
C7
max.
C: Nominal
Capacitance (pF)
10V
0.035
max.
6.3V
0.05
max.
Appearance No marking defects
Capacitance Within ±5% or ±0.5pF
Change
(Whichever is larger)
\`­±
\_`­°±
40
•GNMpp2
40
Solder the capacitor to the test jig (glass epoxy board) in the
same manner and under the same conditions as (10). The
capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should
be traversed in approximately 1 minute. This motion should be
applied for a period of 2 hours in each of 3 mutually perpendicular directions (total of 6 hours).
Solder the capacitor on the test jig (glass epoxy board) shown
in Fig. 2 using a eutectic solder.
Then apply a force in the direction shown in Fig. 3 for 5±1 sec.
The soldering should be done by the reflow method and should
be conducted with care so that the soldering is uniform and free
of defects such as heat shock.
Within ±10%
•GNMpp4
5.0
a
b
12 Deflection
2
Test Method
Temperature
Compensating Type
100
5.0
a
b
c
1.0
c
d
Type
GNM1M2
GNM212
GNM214
GNM314
100
20
1.0
50 Pressurizing
speed : 1.0mm/sec.
Pressurize
R230
d
t=0.8mm
a
2.0±0.05
2.0±0.05
2.0±0.05
2.5±0.05
b
0.5±0.05
0.6±0.05
0.7±0.05
0.8±0.05
c
d
0.32±0.05 0.32±0.05
0.5±0.05 0.5±0.05
0.3±0.05 0.2±0.05
0.4±0.05 0.4±0.05
(in mm)
Flexure : V1
Capacitance meter
45
45
Fig. 3
Fig. 2
13
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion). Preheat at
80 to 120°C for 10 to 30 seconds. After preheating, immerse in
eutectic solder solution for 2±0.5 seconds at 230±5°C or
Sn-3.0Ag-0.5Cu solder solution for 2±0.5 seconds at 245±5°C.
Solderability of
Termination
75% of the terminations are to be soldered evenly and
continuously.
Resistance to
Soldering Heat
The measured and observed characteristics should satisfy the
specifications in the following table.
Appearance No marking defects
Within ±2.5%
Capacitance
or ±0.25pF
Change
(Whichever is
larger)
14
Q/D.F.
30pF min.: QU1000
30pF max.:
QU400+20C
C: Nominal
Capacitance (pF)
Preheat the capacitor at 120 to 150°C for 1 minute. Immerse
the capacitor in a eutectic solder or Sn-3.0Ag-0.5Cu solder
solution at 270±5°C for 10±0.5 seconds. Let sit at room
temperature for 24±2 hours, then measure.
R7, R6, C7: Within ±7.5%
Char. 25V min. 16V
R7, R6, 0.025 0.035
max.
C7
max.
10V
0.035
max.
I.R.
More than 10,000MΩ or 500Ω · F (Whichever is smaller)
Dielectric
Strength
No failure
6.3V
0.05
max.
• Initial measurement for high dielectric constant type
Perform a heat treatment at 150+0/-10°C for one hour and
then let sit for 24±2 hours at room temperature.
Perform the initial measurement.
Continued on the following page.
69
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GNM Series Specifications and Test Methods (1)
Continued from the preceding page.
2
In case Non "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (1).
In case "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (2).
Specifications
No.
Item
Temperature
Cycle
Temperature
Compensating Type
Test Method
High Dielectric Type
The measured and observed characteristics should satisfy the
specifications in the following table.
Appearance No marking defects
Within ±2.5%
Capacitance
or ±0.25pF
Change
(Whichever is
larger)
R7, R6, C7: Within ±7.5%
Fix the capacitor to the supporting jig in the same manner and
under the same conditions as (10). Perform the five cycles
according to the four heat treatments listed in the following
table. Let sit for 24±2 hours (temperature compensating type)
or 48±4 hours (high dielectric constant type) at room
temperature, then measure.
Step
15
Q/D.F.
30pF min.: QU1000
30pF max.:
QU400+20C
C:Nominal
Capacitance (pF)
Char. 25V min. 16V
R7, R6, 0.025 0.035
max.
C7
max.
10V
0.035
max.
I.R.
More than 10,000MΩ or 500Ω · F (Whichever is smaller)
Dielectric
Strength
No failure
Humidity Steady
State
6.3V
0.05
max.
1
Min.
Temp. (°C) Operating
Temp.+0/–3
Time (min.)
30±3
2
Room
Temp.
2 to 3
3
Max.
Operating
Temp. +3/–0
30±3
4
Room
Temp.
2 to 3
• Initial measurement for high dielectric constant type
Perform a heat treatment at 150+0/-10°C for one hour and
then let sit for 24±2 hours at room temperature.
Perform the initial measurement.
The measured and observed characteristics should satisfy the
specifications in the following table.
Appearance No marking defects
Within ±5%
Capacitance
or ±0.5pF
Change
(Whichever is
larger)
R7, R6, C7: Within ±12.5%
Sit the capacitor at 40±2°C and 90 to 95% humidity for 500±12
hours.
Remove and let sit for 24±2 hours at room temperature, then
measure.
Q/D.F.
30pF and over:
QU350
10pF and over,
30pF and below:
QU275+5C/2
10pF and below:
QU200+10C
C: Nominal
Capacitance (pF)
I.R.
More than 1,000MΩ or 50Ω · F (Whichever is smaller)
16
Humidity Load
Char. 25V min.
R7, R6,
0.05
C7
max.
16V
0.05
max.
10V/6.3V
0.05
max.
The measured and observed characteristics should satisfy the
specifications in the following table.
Appearance No marking defects
Within ±7.5%
Capacitance
or ±0.75pF
Change
(Whichever is
larger)
17
Q/D.F.
30pF and over:
QU200
30pF and below:
QU100+10C/3
R7, R6, C7: Within ±12.5%
Char. 25V min.
R7, R6,
0.05
C7
max.
16V
0.05
max.
10V/6.3V
0.05
max.
Apply the rated voltage at 40±2°C and 90 to 95% humidity for
500±12 hours.
Remove and let sit for 24±2 hours at room temperature, then
measure.
The charge/discharge current is less than 50mA.
C: Nominal
Capacitance (pF)
I.R.
More than 500MΩ or 25Ω · F (Whichever is smaller)
Continued on the following page.
70
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GNM Series Specifications and Test
Methods
(1)
GNM
Series Specifications
and Test Methods (1)
Continued from the preceding page.
In case Non "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (1).
In case "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (2).
Specifications
No.
Item
High Temperature
Load
Temperature
Compensating Type
2
Test Method
High Dielectric Type
The measured and observed characteristics should satisfy the
specifications in the following table.
Appearance No marking defects
Within ±3%
Capacitance
or ±0.3pF
Change
(Whichever is
larger)
Apply 200% of the rated voltage for 1000±12 hours at the
maximum operating temperature ±3°C. Let sit for 24±2 hours
at room temperature, then measure.
The charge/discharge current is less than 50mA.
R7, R6, C7: Within ±12.5%
Q/D.F.
30pF and over:
QU350
10pF and over,
30pF and below:
QU275+5C/2
10pF and below:
QU200+10C
C: Nominal
Capacitance (pF)
I.R.
More than 1,000MΩ or 50Ω · F (Whichever is smaller)
18
Char. 25V min.
R7, R6,
0.04
C7
max.
16V
0.05
max.
10V/6.3V
0.05
max.
• Initial measurement for high dielectric constant type.
Apply 200% of the rated DC voltage for one hour at the
maximum operating temperature ±3°C. Remove and let sit for
24±2 hours at room temperature. Perform initial
measurement.
Table A
Char.
5C
Nominal Values
(ppm/°C) Note 1
0±30
–55°C
Max.
0.58
Min.
–0.24
Capacitance Change from 25°C (%)
–30°C
Max.
Min.
0.40
–0.17
–10°C
Max.
0.25
Min.
–0.11
Note 1: Nominal values denote the temperature coefficient within a range of 25 to 125°C.
71
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GNM Series Specifications and Test Methods (2)
In case Non "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (1).
In case "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (2).
No.
Item
1
Operating
Temperature Range
Specifications
Test Method
R6: –55°C to +85°C
2
Rated Voltage
See the previous pages.
The rated voltage is defined as the maximum voltage which
may be applied continuously to the capacitor.
When AC voltage is superimposed on DC voltage, VP-P or VO-P,
whichever is larger, should be maintained within the rated
voltage range.
3
Appearance
No defects or abnormalities
Visual inspection
4
Dimensions
Within the specified dimension
Using calipers
5
Dielectric Strength
No defects or abnormalities
No failure should be observed when 250% of the rated voltage
is applied between the terminations for 1 to 5 seconds,
provided the charge/discharge current is less than 50mA.
6
Insulation Resistance
50Ω · F min.
The insulation resistance should be measured with a DC
voltage not exceeding the rated voltage at 25°C and 75%RH
max. and within 1 minute of charging.
7
Capacitance
Within the specified tolerance
The capacitance/D.F. should be measured at 25°C at the
frequency and voltage shown in the table.
Nominal Capacitance Measuring Frequency Measuring Voltage
CV10µF *1 (10V min.)
1±0.1kHz
1.0±0.2Vrms
CV10µF *2 (6.3V max.)
1±0.1kHz
0.5±0.1Vrms
*1For items in Table1
1±0.1kHz
0.5±0.1Vrms
*2For items in Table2
1±0.1kHz
1.0±0.1Vrms
0.1 max.*3
8
Dissipation Factor
(D.F.)
Table 3
GNM0M2
GNM1M2
GNM1M2
GNM212
GNM212
GNM214
R6
R6
R6
R6
R6
R6
103/223/473/104
0J 105/225
1A 225
0J 225
1A 225
0J 225
Table 1
GNM0M2
GNM0M2
GNM1M2
GNM1M2
R6
R6
R6
R6
1A
1C
1A
1C
104
104
105/225
224/105
Table 2
GNM0M2 R6 0J 103/223/473
GNM212 R6 0J 225
GNM214 R6 0J 105
*3 However 0.125 max. about Table 3 items.
The capacitance change should be measured after 5 min.at
each specified temperature stage.
9
Capacitance
Temperature
Characteristics
Char.
Temp. Range
R6
–55 to +85°C
Reference
Temp.
25°C
Cap. Change
Within ±15%
No removal of the terminations or other defects should occur.
GNMpp4
a
c
c
Adhesive Strength
of Termination
b
a
d
10
GNMpp2
b
d
2
Solder resist
Copper foil
Solder resist
Copper foil
Fig. 1
Appearance No defects or abnormalities
Capacitance Within the specified tolerance
11 Vibration
D.F.
0.1 max.*3
*3 However 0.125 max. about Table 3 items.
Step
1
2
3
4
5
Temperature (°C)
25±2
–55±3
25±2
85±3
25±2
The ranges of capacitance change compared with the 25°C
value over the temperature ranges shown in the table should be
within the specified ranges.
• Initial measurement for high dielectric constant type.
Perform a heat treatment at 150+0/-10°C for one hour and
then set for 24±2 hours at room temperature.
Perform the initial measurement.
Solder the capacitor to the test jig (glass epoxy board) shown in
Fig. 1 using a eutectic solder.
Then apply 5N (GNM0M2: 2N) force in parallel with the test jig for
10±1 sec. The soldering should be done either with an iron or
using the reflow method and should be conducted with care so that
the soldering is uniform and free of defects such as heat shock.
Type
GNM0M2
GNM1M2
GNM212
GNM214
GNM314
a
0.2
0.5
0.6
0.6
0.8
b
0.96
1.6
1.8
2.0
2.5
c
0.25
0.32
0.5
0.25
0.4
d
0.2
0.32
0.5
0.25
0.4
(in mm)
Solder the capacitor to the test jig (glass epoxy board) in
the same manner and under the same conditions as (10).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz.
The frequency range, from 10 to 55Hz and return to 10Hz,
should be traversed in approximately 1 minute. This motion
should be applied for a period of 2 hours in each of 3 mutually
perpendicular directions (total of 6 hours).
Continued on the following page.
72
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GNM Series Specifications and Test
Methods
(2)
GNM
Series Specifications
and Test Methods (2)
In case Non "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (1).
In case "*" is added in PNs table, please refer to GNM Series Specifications and Test Methods (2).
Continued from the preceding page.
No.
Item
Specifications
Test Method
Appearance No marking defects
Capacitance
Within ±10%
Change
40
#GNMpp2
40
#GNMpp4
20
5.0
a
b
12 Deflection
2
Solder the capacitor to the test jig (glass epoxy board) shown in
Fig. 2 using a eutectic solder. Then apply a force in the
direction shown in Fig. 3. The soldering should be done by the
reflow method and should be conducted with care so that the
soldering is uniform and free of defects such as heat shock.
100
5.0
a
b
c
1.0
c
d
Type
GNM0M2
GNM1M2
GNM212
GNM214
GNM314
b
0.2±0.05
0.5±0.05
0.6±0.05
0.7±0.05
0.8±0.05
50 Pressurizing
speed : 1.0mm/sec.
Pressurize
R230
1.0
Thickness: 0.8mm
d
a
2.0±0.05
2.0±0.05
2.0±0.05
2.0±0.05
2.5±0.05
100
c
0.2±0.05
0.32±0.05
0.5±0.05
0.3±0.05
0.4±0.05
d
0.25±0.05
0.32±0.05
0.5±0.05
0.2±0.05
0.4±0.05
(in mm)
Flexure : V1
Capacitance meter
45
45
Fig. 3
Fig. 2
13
Solderability of
Termination
75% of the terminations are to be soldered evenly
and continuously.
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion). Preheat at
80 to 120°C for 10 to 30 seconds. After preheating, immerse in
eutectic solder solution for 2±0.5 seconds at 230±5°C or
Sn-3.0Ag-0.5Cu solder solution for 2±0.5 seconds at 245±5°C.
Appearance No marking defects
Capacitance R6*4: Within ±7.5%
Change
*4 GNM0M2R60E105: Within +15/-7.5%
Resistance
14 to Soldering D.F.
Heat
I.R.
0.1 max. *3
*3 However 0.125 max. about Table 3 items.
50Ω · F min.
Dielectric
No failure
Strength
Appearance No marking defects
Capacitance R6*5: Within ±12.5%
Change
*5 GNM0M2R60E105: Within ±15%
15
Temperature
Cycle
High
Temperature
16 High
Humidity
(Steady)
D.F.
0.1 max. *3
*3 However 0.125 max. about Table 3 items.
I.R.
50Ω · F min.
Preheat the capacitor at 120 to 150°C for 1 minute. Immerse
the capacitor in a eutectic solder or Sn-3.0Ag-0.5Cu solder
solution at 270±5°C for 10±0.5 seconds.
Let sit at room temperature for 24±2 hours, then measure.
• Initial measurement
Perform a heat treatment at 150 +0/-10°C for one hour and
then let sit for 24±2 hours at room temperature. Perform
the initial measurement.
Fix the capacitor to the supporting jig in the same manner and
under the same conditions as (10).
Perform the five cycles according to the four heat treatments
listed in the following table.
Let sit for 24±2 hours at room temperature, then measure.
4
Step
1
2
3
Temp. (°C) Min. Operating Room Min. Operating Room
Temp.
Temp.
Temp.
Temp.
Time (min.)
30±3
30±3
2 to 3
2 to 3
Dielectric
No failure
Strength
• Initial measurement
Perform a heat treatment at 150 +0/-10 °C for one hour and
then let sit for 24±2 hours at room temperature.
Perform the initial measurement.
Appearance No marking defects
Apply the rated voltage at 40±2°C and 90 to 95% humidity for
500±12 hours. The charge/discharge current is less than 50mA.
• Initial measurement
Perform a heat treatment at 150 +0/-10°C for one hour
and then let sit for 24±2 hours at room temperature.
Perform the initial measurement.
• Measurement after test
Perform a heat treatment at 150 +0/-10°C for one hour
and then let sit for 24±2 hours at room temperature, then
measure.
Capacitance
R6: Within ±12.5%
Change
D.F.
0.2 max.
I.R.
12.5Ω · F min.
Appearance No marking defects
Capacitance
R6: Within ±12.5%
Change
D.F.
0.2 max.
I.R.
25Ω · F min.
17 Durability
Apply 150% (GNM1M2R61A225/1C105: 125% of the rated
voltage) of the rated voltage for 1000±12 hours at the
maximum operating temperature ±3°C. Let sit for 24±2 hours
at room temperature, then measure.
The charge/discharge current is less than 50mA.
• Initial measurement
Perform a heat treatment at 150 +0/-10°C for one hour
and then let sit for 24±2 hours at room temperature.
Perform the initial measurement.
• Measurement after test
Perform a heat treatment at 150 +0/-10°C for one hour and
then let sit for 24±2 hours at room temperature, then measure.
73
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Monolithic Ceramic Capacitors
Low ESL LLL/LLA/LLM Series
Reversed Geometry Low ESL Type
L
W
T
■ Features
1. Low ESL, good for noise reduction for high
frequency
2. Small, high cap
■ Applications
1. High speed micro processor
2. High frequency digital equipment
Part Number
LLL153
LLL185
LLL215
LLL216
LLL219
LLL315
LLL317
LLL31M
L
0.5 ±0.05
0.8 ±0.1
Dimensions (mm)
W
1.0 ±0.05
1.6 ±0.1
1.25 ±0.1
2.0 ±0.1
1.6 ±0.15
3.2 ±0.15
T
0.3 ±0.05
0.6 max.
0.5 +0/-0.15
0.6 ±0.1
0.85 ±0.1
0.5 +0/-0.15
0.7 ±0.1
1.15 ±0.1
Eight Terminals Low ESL Type
W
T
L
■ Features
1. Low ESL (100pH) , suitable to decoupling capacitor
for 1GHz clock speed IC.
2. Small, large cap
q
1. High speed micro processor
2. High frequency digital equipment
e
Equivalent Circuit
r
q
e
t
u
w
r
y
i
P
i
■ Applications
w
Part Number
LLA185
LLA215
LLA219
LLA315
LLA319
LLA31M
L
1.6 ±0.1
2.0 ±0.1
2.0 ±0.1
3.2 ±0.15
3.2 ±0.15
3.2 ±0.15
u
y
t
Dimensions (mm)
W
T
0.8 ±0.1
0.5 +0.05/-0.1
1.25 ±0.1
0.5 +0.05/-0.1
1.25 ±0.1
0.85 ±0.1
1.6 ±0.15
0.5 +0.05/-0.1
1.6 ±0.15
0.85 ±0.1
1.6 ±0.15
1.15 ±0.1
P
0.4 ±0.1
0.5 ±0.05
0.5 ±0.05
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
Ten Terminals Low ESL Type
W
L
■ Features
T
3
1. Low ESL (45pH), suitable to decoupling capacitor
for 2GHz clock speed IC.
2. Small, large cap
q
74
e
Equivalent Circuit
r
q e t u o
P
!0
o
■ Applications
1. High speed micro processor
2. High frequency digital equipment
w
Part Number
i
u
t
y
w r y i !0
Dimensions (mm)
L
W
T
P
LLM215
2.0 ±0.1
1.25 ±0.1
0.5 +0.05/-0.1
0.5 ±0.05
LLM315
3.2 ±0.15
1.6 ±0.15
0.5 +0.05/-0.1
0.8 ±0.1
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
Reversed Geometry Low ESL Type X7R(R7)/X7S(C7)/X6S(C8)/X5R(R6) Characteristics
5
ex.5: T Dimension [mm]
LxW
[mm]
0.5x1.0
(15)
<0204>
0.8x1.6
(18)
<0306>
1.25x2.0
(21)
<0508>
1.6x3.2
(31)
<0612>
Rated Voltage 6.3
[Vdc] (0J)
4
(0G)
50
(1H)
25
(1E)
16
(1C)
10
(1A)
4
(0G)
50
(1H)
25
(1E)
16
(1C)
10
(1A)
4
(0G)
50
(1H)
25
(1E)
16
(1C)
10
(1A)
X6S
(C8)
X7S
(C7)
X7R
(R7)
X7R
(R7)
X7R
(R7)
X7R
(R7)
X7S
(C7)
X7R
(R7)
X7R
(R7)
X7R
(R7)
X7R
(R7)
X7S
(C7)
X7R
(R7)
X7R
(R7)
X7R
(R7)
X7R
(R7)
Capacitance
TC
2200pF(222)
5
4700pF(472)
5
10000pF(103)
5
6
7
22000pF(223)
5
6
7
47000pF(473)
5
0.10µF(104)
3
5
0.22µF(224)
3
5
6
7
6
M
M
5
9
M
1.0µF(105)
5
9
2.2µF(225)
5
0.47µF(474)
3
X7R
(R7)
X5R
(R6)
7
6
9
3
6.3
(0J)
7
7
M
7
M
9
4.7µF(475)
7
M
10µF(106)
M
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
Reversed Geometry Low ESL Type X7R(R7)/X7S(C7) Characteristics Low Profile
5
ex.5: T Dimension [mm]
0.8x1.6
(18)
<0306>
LxW
[mm]
1.25x2.0
(21)
<0508>
1.6x3.2
(31)
<0612>
Rated Voltage 25
[Vdc] (1E)
16
(1C)
10
(1A)
4
(0G)
50
(1H)
25
(1E)
16
(1C)
10
(1A)
6.3
(0J)
4
(0G)
50
(1H)
25
(1E)
16
(1C)
10
(1A)
X7R
(R7)
X7R
(R7)
X7R
(R7)
X7S
(C7)
X7R
(R7)
X7R
(R7)
X7R
(R7)
X7R
(R7)
X7R
(R7)
X7S
(C7)
X7R
(R7)
X7R
(R7)
X7R
(R7)
X7R
(R7)
Capacitance
TC
10000pF(103)
5
47000pF(473)
5
0.10µF(104)
0.22µF(224)
5
5
5
22000pF(223)
5
5
5
5
5
5
5
5
5
1.0µF(105)
The part number code is shown in ( ) and Unit is shown in [ ].
5
5
5
0.47µF(474)
5
< >: EIA [inch] Code
Continued on the following page.
75
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
Continued from the preceding page.
Eight Terminals Low ESL Type X7S(C7)/X7R(R7) Characteristics
5
ex.5: T Dimension [mm]
LxW 1.6x0.8
(18)
[mm] <0603>
3
2.0x1.25
(21)
<0805>
3.2x1.6
(31)
<1206>
Rated Voltage
4
[Vdc] (0G)
25
(1E)
16
(1C)
10
(1A)
6.3
(0J)
4
(0G)
16
(1C)
10
(1A)
4
(0G)
X7S
(C7)
X7R
(R7)
X7R
(R7)
X7R
(R7)
X7R
(R7)
X7S
(C7)
X7R
(R7)
X7R
(R7)
X7R
(R7)
Capacitance
TC
10000pF(103)
9
22000pF(223)
9
47000pF(473)
9
0.10µF(104)
5
9
0.22µF(224)
5
9
0.47µF(474)
5
1.0µF(105)
5
2.2µF(225)
5
9
9
9
9
M
9
4.7µF(475)
9
M
9
9
9
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
Eight Terminals Low ESL Type X7R(R7)/X7S(C7) Characteristics Low Profile
5
ex.5: T Dimension [mm]
2.0x1.25
(21)
<0805>
LxW
[mm]
3.2x1.6
(31)
<1206>
Rated Voltage 25
[Vdc] (1E)
16
(1C)
10
(1A)
6.3
(0J)
4
(0G)
16
(1C)
10
(1A)
6.3
(0J)
X7R
(R7)
X7R
(R7)
X7R
(R7)
X7R
(R7)
X7S
(C7)
X7R
(R7)
X7R
(R7)
X7R
(R7)
Capacitance
TC
10000pF(103)
5
22000pF(223)
5
47000pF(473)
5
0.10µF(104)
5
0.22µF(224)
5
5
0.47µF(474)
5
5
1.0µF(105)
5
5
2.2µF(225)
5
5
4.7µF(475)
5
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
Ten Terminals Low ESL Type X7R(R7)/X7S(C7) Characteristics Low Profile
5
ex.5: T Dimension [mm]
2.0x1.25
(21)
<0805>
LxW
[mm]
3.2x1.6
(31)
<1206>
Rated Voltage 25
[Vdc] (1E)
16
(1C)
6.3
(0J)
4
(0G)
16
(1C)
10
(1A)
6.3
(0J)
X7R
(R7)
X7R
(R7)
X7R
(R7)
X7S
(C7)
X7R
(R7)
X7R
(R7)
X7R
(R7)
Capacitance
TC
10000pF(103)
5
22000pF(223)
5
47000pF(473)
5
0.10µF(104)
5
5
0.22µF(224)
5
0.47µF(474)
5
5
5
1.0µF(105)
5
2.2µF(225)
5
The part number code is shown in ( ) and Unit is shown in [ ].
76
5
< >: EIA [inch] Code
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Reversed Geometry Low ESL Type X7R(R7)/X7S(C7)/X6S(C8) Characteristics
0.5x1.0(15)<0204>
LxW [mm]
6.3(0J)
Rated Volt. [Vdc]
Capacitance
Tolerance
4(0G)
Part Number
0.10µF(104)
±20%(M)
LLL153C80J104ME01E*
0.22µF(224)
±20%(M)
LLL153C80J224ME14E*
0.47µF(474)
±20%(M)
3
LLL153C70G474ME17E*
LLL153 Series 4V/0.47µF(L: 0.5+0.07/-0.03mm)
0.8x1.6(18)<0306>
LxW [mm]
50(1H)
Rated Volt. [Vdc]
Capacitance
25(1E)
Tolerance
16(1C)
10(1A)
Part Number
2200pF(222)
±20%(M)
LLL185R71H222MA01L
4700pF(472)
±20%(M)
LLL185R71H472MA01L
10000pF(103)
±20%(M)
LLL185R71E103MA01L
22000pF(223)
±20%(M)
LLL185R71E223MA01L
47000pF(473)
±20%(M)
0.10µF(104)
±20%(M)
LLL185R71A104MA01L
0.22µF(224)
±20%(M)
LLL185R71A224MA01L
LLL185R71C473MA01L
0.8x1.6(18)<0306>
LxW [mm]
4(0G)
Rated Volt. [Vdc]
Capacitance
Tolerance
Part Number
0.47µF(474)
±20%(M)
LLL185C70G474MA01L
1.0µF(105)
±20%(M)
LLL185C70G105ME02L*
2.2µF(225)
±20%(M)
LLL185C70G225ME01L*
1.25x2.0(21)<0508>
LxW [mm]
50(1H)
Rated Volt. [Vdc]
Capacitance
25(1E)
Tolerance
16(1C)
10(1A)
LLL219R71C224MA01L
LLL216R71A224MA01L
Part Number
10000pF(103)
±20%(M)
LLL216R71H103MA01L
22000pF(223)
±20%(M)
LLL216R71H223MA01L
47000pF(473)
±20%(M)
LLL216R71E473MA01L
0.10µF(104)
±20%(M)
LLL216R71E104MA01L
0.22µF(224)
±20%(M)
0.47µF(474)
±20%(M)
LLL219R71A474MA01L
1.0µF(105)
±20%(M)
LLL219R71A105MA01L
1.25x2.0(21)<0508>
LxW [mm]
4(0G)
Rated Volt. [Vdc]
Capacitance
2.2µF(225)
Tolerance
Part Number
±20%(M)
LLL219C70G225MA01L
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
*: Please refer to LLL/LLA/LLM Series Specifications and Test Method(2).
qProduct ID
wSeries
tTemperature Characteristics
u i o !0 iCapacitance Tolerance
q w e r t y
Packaging Code in Part Number is a code shows STD 180mm Reel Taping.
(Part Number) LL
L
15
3
C8
0J
104
M
E01 E
eDimension (LxW)
yRated Voltage
oIndividual Specification Code
rDimension (T)
uCapacitance
!0Packaging
77
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Reversed Geometry Low ESL Type X7R(R7)/X5R(R6) Characteristics
1.6x3.2(31)<0612>
LxW [mm]
50(1H)
Rated Volt. [Vdc]
Capacitance
3
25(1E)
Tolerance
16(1C)
10000pF(103)
±20%(M)
LLL317R71H103MA01L
22000pF(223)
±20%(M)
LLL317R71H223MA01L
47000pF(473)
±20%(M)
LLL317R71H473MA01L
0.10µF(104)
±20%(M)
LLL31MR71H104MA01L
0.22µF(224)
±20%(M)
LLL31MR71E224MA01L
0.47µF(474)
±20%(M)
LLL31MR71E474MA01L
1.0µF(105)
±20%(M)
2.2µF(225)
±20%(M)
LLL317R71E104MA01L
LLL317R71C224MA01L
LLL317R71C474MA01L
LLL31MR71C105MA01L
LLL317R71A105MA01L
LLL31MR71A225MA01L
1.6x3.2(31)<0612>
LxW [mm]
6.3(0J)
Rated Volt. [Vdc]
Capacitance
10(1A)
Part Number
Tolerance
Part Number
2.2µF(225)
±20%(M)
LLL317R70J225MA01L
4.7µF(475)
±20%(M)
LLL31MR70J475MA01L
10µF(106)
±20%(M)
LLL31MR60J106ME01L*
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
*: Please refer to LLL/LLA/LLM Series Specifications and Test Method(2).
Reversed Geometry Low ESL Type X7R(R7)/X7S(C7) Characteristics Low Profile
0.8x1.6(18)<0306>
LxW [mm]
25(1E)
Rated Volt. [Vdc]
Capacitance
16(1C)
Tolerance
10(1A)
10000pF(103)
±20%(M)
22000pF(223)
±20%(M)
LLL185R71C223MA11L
47000pF(473)
±20%(M)
LLL185R71C473MA11L
0.10µF(104)
±20%(M)
0.22µF(224)
±20%(M)
LLL185R71E103MA11L
LLL185R71A104MA11L
LLL185C70G224MA11L
1.25x2.0(21)<0508>
LxW [mm]
50(1H)
Rated Volt. [Vdc]
Capacitance
25(1E)
Tolerance
16(1C)
10(1A)
Part Number
10000pF(103)
±20%(M)
22000pF(223)
±20%(M)
47000pF(473)
±20%(M)
LLL215R71C473MA11L
0.10µF(104)
±20%(M)
LLL215R71C104MA11L
0.22µF(224)
±20%(M)
LLL215R71H103MA11L
LLL215R71E223MA11L
LLL215R71A224MA11L
1.25x2.0(21)<0508>
LxW [mm]
6.3(0J)
Rated Volt. [Vdc]
Capacitance
4(0G)
Part Number
Tolerance
0.47µF(474)
±20%(M)
1.0µF(105)
±20%(M)
4(0G)
Part Number
LLL215R70J474MA11L
LLL215C70G105MA11L
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
*: Please refer to LLL/LLA/LLM Series Specifications and Test Method(2).
qProduct ID
wSeries
tTemperature Characteristics
u i o !0 iCapacitance Tolerance
q w e r t y
Packaging Code in Part Number is a code shows STD 180mm Reel Taping.
(Part Number) LL
78
L
31
7
R7 1H
103
M
A01 L
eDimension (LxW)
yRated Voltage
oIndividual Specification Code
rDimension (T)
uCapacitance
!0Packaging
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Reversed Geometry Low ESL Type X7R(R7) Characteristics Low Profile
1.6x3.2(31)<0612>
LxW [mm]
50(1H)
Rated Volt. [Vdc]
Capacitance
25(1E)
16(1C)
Tolerance
10(1A)
Part Number
10000pF(103)
±20%(M)
LLL315R71H103MA11L
22000pF(223)
±20%(M)
LLL315R71H223MA11L
47000pF(473)
±20%(M)
LLL315R71E473MA11L
0.10µF(104)
±20%(M)
LLL315R71E104MA11L
0.22µF(224)
±20%(M)
0.47µF(474)
±20%(M)
3
LLL315R71C224MA11L
LLL315R71A474MA11L
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
*: Please refer to LLL/LLA/LLM Series Specifications and Test Method(2).
Eight Terminals Low ESL Type X7R(R7)/X7S(C7) Characteristics
1.6x0.8(18)<0603>
LxW [mm]
4(0G)
Rated Volt. [Vdc]
Capacitance
Tolerance
Part Number
0.10µF(104)
±20%(M)
LLA185C70G104MA01L
0.22µF(224)
±20%(M)
LLA185C70G224MA01L
0.47µF(474)
±20%(M)
LLA185C70G474MA01L
1.0µF(105)
±20%(M)
LLA185C70G105ME01L*
2.2µF(225)
±20%(M)
LLA185C70G225ME16L*
2.0x1.25(21)<0805>
LxW [mm]
25(1E)
Rated Volt. [Vdc]
Capacitance
16(1C)
Tolerance
10(1A)
10000pF(103)
±20%(M)
LLA219R71E103MA01L
22000pF(223)
±20%(M)
LLA219R71E223MA01L
47000pF(473)
±20%(M)
LLA219R71E473MA01L
0.10µF(104)
±20%(M)
LLA219R71C104MA01L
0.22µF(224)
±20%(M)
LLA219R71C224MA01L
0.47µF(474)
±20%(M)
1.0µF(105)
±20%(M)
LLA219R71A474MA01L
LLA219R70J105MA01L
2.0x1.25(21)<0805>
LxW [mm]
4(0G)
Rated Volt. [Vdc]
Capacitance
Tolerance
Part Number
2.2µF(225)
±20%(M)
LLA219C70G225MA01L
4.7µF(475)
±20%(M)
LLA219C70G475ME01L*
3.2x1.6(31)<1206>
LxW [mm]
16(1C)
Rated Volt. [Vdc]
Capacitance
6.3(0J)
Part Number
Tolerance
10(1A)
4(0G)
Part Number
0.10µF(104)
±20%(M)
LLA319R71C104MA01L
0.22µF(224)
±20%(M)
LLA319R71C224MA01L
0.47µF(474)
±20%(M)
LLA319R71C474MA01L
1.0µF(105)
±20%(M)
LLA31MR71C105MA01L
2.2µF(225)
±20%(M)
LLA319R71A105MA01L
LLA31MR71A225MA01L
LLA319R70G225MA01L
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
*: Please refer to LLL/LLA/LLM Series Specifications and Test Method(2).
79
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Eight Terminals Low ESL Type X7R(R7)/X7S(C7) Characteristics Low Profile
2.0x1.25(21)<0805>
LxW [mm]
25(1E)
Rated Volt. [Vdc]
Capacitance
3
16(1C)
10(1A)
Tolerance
10000pF(103)
±20%(M)
LLA215R71E103MA14L
22000pF(223)
±20%(M)
LLA215R71E223MA14L
47000pF(473)
±20%(M)
LLA215R71C473MA14L
0.10µF(104)
±20%(M)
LLA215R71C104MA14L
0.22µF(224)
±20%(M)
0.47µF(474)
±20%(M)
LLA215R71A224MA14L
LLA215R70J474MA14L
2.0x1.25(21)<0805>
LxW [mm]
4(0G)
Rated Volt. [Vdc]
Capacitance
Tolerance
Part Number
1.0µF(105)
±20%(M)
LLA215C70G105MA14L
2.2µF(225)
±20%(M)
LLA215C70G225ME11L*
4.7µF(475)
±20%(M)
LLA215C70G475ME19L*
3.2x1.6(31)<1206>
LxW [mm]
16(1C)
Rated Volt. [Vdc]
Capacitance
6.3(0J)
Part Number
10(1A)
Tolerance
6.3(0J)
Part Number
0.22µF(224)
±20%(M)
0.47µF(474)
±20%(M)
1.0µF(105)
±20%(M)
LLA315R70J105MA14L
2.2µF(225)
±20%(M)
LLA315R70J225MA14L
LLA315R71C224MA14L
LLA315R71A474MA14L
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
*: Please refer to LLL/LLA/LLM Series Specifications and Test Method(2).
Ten Terminals Low ESL Type X7R(R7)/X7S(C7) Characteristics Low Profile
2.0x1.25(21)<0805>
LxW [mm]
25(1E)
Rated Volt. [Vdc]
Capacitance
16(1C)
Tolerance
6.3(0J)
4(0G)
Part Number
10000pF(103)
±20%(M)
LLM215R71E103MA11L
22000pF(223)
±20%(M)
LLM215R71E223MA11L
47000pF(473)
±20%(M)
LLM215R71C473MA11L
0.10µF(104)
±20%(M)
LLM215R71C104MA11L
0.22µF(224)
±20%(M)
LLM215R70J224MA11L
0.47µF(474)
±20%(M)
LLM215R70J474MA11L
1.0µF(105)
±20%(M)
LLM215C70G105MA11L
2.2µF(225)
±20%(M)
LLM215C70G225ME11L*
3.2x1.6(31)<1206>
LxW [mm]
16(1C)
Rated Volt. [Vdc]
Capacitance
10(1A)
Tolerance
6.3(0J)
Part Number
0.10µF(104)
±20%(M)
LLM315R71C104MA11L
0.22µF(224)
±20%(M)
LLM315R71C224MA11L
0.47µF(474)
±20%(M)
2.2µF(225)
±20%(M)
LLM315R71A474MA11L
LLM315R70J225MA11L
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
*: Please refer to LLL/LLA/LLM Series Specifications and Test Method(2).
qProduct ID
wSeries
tTemperature Characteristics
u i o !0 iCapacitance Tolerance
q w e r t y
Packaging Code in Part Number is a code shows STD 180mm Reel Taping.
(Part Number) LL
80
A
21
5
R7 1E
103
M
A14 L
eDimension (LxW)
yRated Voltage
oIndividual Specification Code
rDimension (T)
uCapacitance
!0Packaging
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
LLL/LLA/LLM Series Specifications
and
Test Methods
(1) and Test Methods (1)
LLL/LLA/LLM
Series
Specifications
In case Non "*" is added in PNs table, please refer to LLL/LLA/LLM Series Specifications and Test Methods (1).
In case "*" is added in PNs table, please refer to LLL/LLA/LLM Series Specifications and Test Methods (2).
No.
1
Specifications
Item
Operating
Temperature
Range
Test Method
R7, C7: Y55 to W125°C
3
2
Rated Voltage
See the previous pages.
The rated voltage is defined as the maximum voltage which
may be applied continuously to the capacitor.
When AC voltage is superimposed on DC voltage, VP-P or VO-P,
whichever is larger, should be maintained within the rated
voltage range.
3
Appearance
No defects or abnormalities
Visual inspection
4
Dimensions
Within the specified dimension
Using calipers
5
Dielectric Strength
No defects or abnormalities
No failure should be observed when 250% of the rated voltage
is applied between the terminations for 1 to 5 seconds,
provided the charge/discharge current is less than 50mA.
6
Insulation
Resistance
CV0.047µF: More than 10,000MΩ
CG0.047µF: More than 500Ω · F
C: Normal Capacitance
The insulation resistance should be measured with a DC voltage
not exceeding the rated voltage at 25°C and 75%RH max. and
within 2 minutes of charging.
7
Capacitance
Within the specified tolerance
8
Dissipation Factor
(D.F.)
W.V.: 25V min.; 0.025 max.
W.V.: 16V/10V max.; 0.035 max.
W.V.: 6.3V max.; 0.05 max.
The capacitance/D.F. should be measured at 25°C at the
frequency and voltage shown in the table.
Frequency: 1T0.1kHz
Voltage: 1T0.2Vrms
*For LLA185C70G474, the capacitance should be measured
unsing a voltage of 0.5±0.1Vrms.
The capacitance change should be measured after 5 min. at
each specified temperature stage.
9
10
11
12
Capacitance
Temperature
Characteristics
Adhesive Strength
of Termination
R7
C7
Temp. Range
(°C)
Y55 to +125
Y55 to +125
Reference
Temp.
25°C
25°C
No defects or abnormalities
Capacitance
Within the specified tolerance
D.F.
W.V.: 25V min.; 0.025 max.
W.V.: 16V/10V max.; 0.035 max.
W.V.: 6.3V max.; 0.05 max.
Solderability of
Termination
Cap.Change
Within T15%
Within T22%
No removal of the terminations or other defect should occur.
Appearance
Vibration
Resistance
Resistance
13 to Soldering
Heat
Char.
75% of the terminations are to be soldered evenly
and continuously.
Appearance
No marking defects
Capacitance
Change
Within T7.5%
D.F.
W.V.: 25V min.; 0.025 max.
W.V.: 16V/10V max.; 0.035 max.
W.V.: 6.3V max.; 0.05 max.
I.R.
More than 10,000MΩ or 500Ω · F (Whichever is smaller)
Dielectric
Strength
No failure
Step
1
2
3
4
5
Temperature (°C)
25T2
Y55T3
25T2
125T3
25T2
The ranges of capacitance change compared with the 25°C
value over the temperature ranges shown in the table should
be within the specified ranges.
• Initial measurement.
Perform a heat treatment at 150+0/-10°C for one hour and then
set for 24±2 hours at room temperature. Perform the initial
measurement.
Solder the capacitor to the test jig (glass epoxy board) using a
eutectic solder. Then apply 10N* force in parallel with the test
jig for 10T1 sec. The soldering should be done either with an
iron or using the reflow method and should be conducted with
care so that the soldering is uniform and free of defects such as
heat shock.
*LLL18 and LLA/LLM Series: 5N
Solder the capacitor to the test jig (glass epoxy board) in
the same manner and under the same conditions as (10). The
capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should
be traversed in approximately 1 minute. This motion should be
applied for a period of 2 hours in each of 3 mutually
perpendicular directions (total of 6 hours).
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion). Preheat at
80 to 120°C for 10 to 30 seconds. After preheating, immerse in
eutectic solder solution for 2T0.5 seconds at 230T5°C, or
Sn-3.0Ag-0.5Cu solder solution for 2T0.5 seconds at 245T5°C.
Preheat the capacitor at 120 to 150°C for 1 minute. Immerse
the capacitor in a eutectic solder or Sn-3.0Ag-0.5Cu solder
solution at 270T5°C for 10T0.5 seconds. Let sit at room
temperature for 24T2 hours, then measure.
• Initial measurement.
Perform a heat treatment at 150 +0
–10 °C for one hour and then
let sit for 24T2 hours at room temperature. Perform the initial
measurement.
Continued on the following page.
81
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
LLL/LLA/LLM Series Specifications and Test Methods (1)
Continued from the preceding page.
No.
Specifications
Item
3
14
In case Non "*" is added in PNs table, please refer to LLL/LLA/LLM Series Specifications and Test Methods (1).
In case "*" is added in PNs table, please refer to LLL/LLA/LLM Series Specifications and Test Methods (2).
Temperature
Cycle
Appearance
No marking defects
Capacitance
Change
Within T7.5%
D.F.
W.V.: 25V min.; 0.025 max.
W.V.: 16V/10V max.; 0.035 max.
W.V.: 6.3V max.; 0.05 max.
I.R.
More than 10,000MΩ or 500Ω · F (Whichever is smaller)
Test Method
Fix the capacitor to the supporting jig in the same manner and
under the same conditions as (10).
Perform the five cycles according to the four heat treatments
listed in the following table. Let sit for 24T2 hours at room
temperature, then measure.
Step
1
2
3
4
Min. Operating Room Max. Operating Room
+3
Temp. (°C) Temp. +0
–3
Temp. –0
Temp.
Temp.
Time (min.)
15
16
17
82
Humidity
(Steady
State)
Humidity
Load
High
Temperature
Load
Dielectric
Strength
No failure
Appearance
No marking defects
Capacitance
Change
Within T12.5%
D.F.
W.V.: 10V min.; 0.05 max.
W.V.: 6.3V max.; 0.075 max.
I.R.
More than 1,000MΩ or 50Ω · F (Whichever is smaller)
Appearance
No marking defects
Capacitance
Change
Within T12.5%
D.F.
W.V.: 10V min.; 0.05 max.
W.V.: 6.3V max.; 0.075 max.
I.R.
More than 500MΩ or 25Ω · F
(Whichever is smaller)
Appearance
No marking defects
Capacitance
Change
Within T12.5%
D.F.
W.V.: 10V min.; 0.05 max.
W.V.: 6.3V max.; 0.075 max.
I.R.
More than 1,000MΩ or 50Ω · F
(Whichever is smaller)
30T3
2 to 3
30T3
2 to 3
• Initial measurement.
Perform a heat treatment at 150 +0
–10 °C for one hour and then
let sit for 24T2 hours at room temperature. Perform the initial
measurement.
Sit the capacitor at 40T2°C and 90 to 95% humidity for 500T12
hours. Remove and let sit for 24T2 hours at room temperature,
then measure.
Apply the rated voltage at 40T2°C and 90 to 95% humidity for
500T12 hours. Remove and let sit for 24T2 hours at room
temperature, then measure. The charge/discharge current is
less than 50mA.
Apply 200% of the rated voltage for 1000T12 hours at the
maximum operating temperature T3°C. Let sit for 24T2 hours
at room temperature, then measure. The charge/discharge
current is less than 50mA.
•Initial measurement.
Apply 200% of the rated DC voltage for one hour at the
maximum operating temperature T3°C. Remove and let sit for
24T2 hours at room temperature.
Perform initial measurement.
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
LLL/LLA/LLM Series Specifications
and
Test Methods
(2) and Test Methods (2)
LLL/LLA/LLM
Series
Specifications
In case Non "*" is added in PNs table, please refer to LLL/LLA/LLM Series Specifications and Test Methods (1).
In case "*" is added in PNs table, please refer to LLL/LLA/LLM Series Specifications and Test Methods (2).
No.
1
Item
Operating
Temperature
Range
Specifications
Test Method
R6: –55 to +85°C
R7, C7: –55 to +125°C
C8: –55 to +105°C
3
2
Rated Voltage
See the previous pages.
The rated voltage is defined as the maximum voltage which
may be applied continuously to the capacitor.
When AC voltage is superimposed on DC voltage, VP-P or VO-P,
whichever is larger, should be maintained within the rated
voltage range.
3
Appearance
No defects or abnormalities
Visual inspection
4
Dimensions
Within the specified dimension
Using calipers
5
Dielectric Strength
No defects or abnormalities
No failure should be observed when 250% of the rated voltage
is applied between the terminations for 1 to 5 seconds,
provided the charge/discharge current is less than 50mA.
6
Insulation
Resistance
50Ω · F min.
The insulation resistance should be measured with a DC voltage
not exceeding the rated voltage at 25°C and 75%RH max. and
within 1 minute of charging.
7
Capacitance
Within the specified tolerance
8
Dissipation Factor
(D.F.)
R6, R7, C7, C8: 0.120 max.
Char.
9
10
Capacitance
Temperature
Characteristics
Adhesive Strength
of Termination
R6
R7
C7
C8
Temp. Range
(°C)
–55 to +85
–55 to +125
–55 to +125
–55 to +105
The capacitance/D.F. should be measured at 25°C at the
frequency and voltage shown in the table.
Capacitance
CV10µF (10V min.)
CV10µF (6.3V max.)
C>10µF
Reference
Temp.
Cap. Change
25°C
Within ±15%
Within ±15%
Within ±22%
Within ±22%
No removal of the terminations or other defect should occur.
Appearance No defects or abnormalities
Capacitance Within the specified tolerance
11 Vibration
D.F.
12
Solderability of
Termination
R6, R7, C7, C8: 0.120 max.
75% of the terminations are to be soldered evenly
and continuously.
Appearance No marking defects
Capacitance
R6, R7, C7, C8: Within ±7.5%
Change
Resistance
13 to Soldering D.F.
R6, R7, C7, C8: 0.120 max.
Heat
I.R.
50Ω · F min.
Dielectric
No failure
Strength
Frequency
1±0.1kHz
1±0.1kHz
120±24Hz
Voltage
1.0±0.2Vrms
0.5±0.1Vrms
0.5±0.1Vrms
The capacitance change should be measured after 5 min. at
each specified temperature stage.
The ranges of capacitance change compared with the 25°C
value over the temperature ranges shown in the table should
be within the specified ranges.
• Initial measurement.
Perform a heat treatment at 150+0/-10°C for one hour and then
set for 24±2 hours at room temperature. Perform the initial
measurement.
Solder the capacitor to the test jig (glass epoxy board) using a
eutectic solder. Then apply 10N* force in parallel with the test
jig for 10±1 sec. The soldering should be done either with an
iron or using the reflow method and should be conducted with
care so that the soldering is uniform and free of defects such as
heat shock.
*5N (LLL15, LLL18, LLA,LLM Series)
Solder the capacitor to the test jig (glass epoxy board) in
the same manner and under the same conditions as (10). The
capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should
be traversed in approximately 1 minute. This motion should be
applied for a period of 2 hours in each of 3 mutually
perpendicular directions (total of 6 hours).
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion). Preheat at
80 to 120°C for 10 to 30 seconds. After preheating, immerse in
eutectic solder solution for 2±0.5 seconds at 230±5°C, or
Sn-3.0Ag-0.5Cu solder solution for 2±0.5 seconds at 245±5°C.
Preheat the capacitor at 120 to 150°C for 1 minute. Immerse
the capacitor in a eutectic solder or Sn-3.0Ag-0.5Cu solder
solution at 270±5°C for 10±0.5 seconds.
Let sit at room temperature for 24±2 hours, then measure.
• Initial measurement.
0
Perform a heat treatment at 150+
–10°C for one hour and then
let sit for 24±2 hours at room temperature. Perform the initial
measurement.
Continued on the following page.
83
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
LLL/LLA/LLM Series Specifications and Test Methods (2)
Continued from the preceding page.
No.
In case Non "*" is added in PNs table, please refer to LLL/LLA/LLM Series Specifications and Test Methods (1).
In case "*" is added in PNs table, please refer to LLL/LLA/LLM Series Specifications and Test Methods (2).
Item
Specifications
Appearance No marking defects
Capacitance
R6, R7, C7, C8: Within ±12.5%
Change
3
Temperature
14 Sudden
Change
Fix the capacitor to the supporting jig in the same manner and
under the same conditions as (10).Perform the five cycles
according to the four heat treatments listed in the following
table. Let sit for 24±2 hours at room temperature,
then measure.
D.F.
R6, R7, C7, C8: 0.120 max.
I.R.
50Ω · F min.
Dielectric
Strength
No failure
• Initial measurement
0
–10°C for one hour and then
Perform a heat treatment at 150+
let sit for 24±2 hours at room temperature. Perform the initial
measurement.
Appearance No marking defects
Apply the rated voltage at 40±2°C and 90 to 95% humidity for
500±12 hours.
The charge/discharge current is less than 50mA.
Apply the rated DC voltage.
Capacitance
R6, R7, C7, C8: Within ±12.5%
Change
High
Temperature
High
15
Humidity
(Steady
State)
Test Method
D.F.
2
4
1
3
Min.
Operating
Room
Min.
Operating
Room
Temp. (°C)
0
0
Temp. +
Temp.
Temp. +
Temp.
–3
–3
Time (min.)
30±3
2 to 3
30±3
2 to 3
Step
R6, R7, C7, C8: 0.2 max.
•Initial measurement
0
–10°C for one hour and then
Perform a heat treatment at 150+
let sit for 24±2 hours at room temperature. Perform the initial
measurement.
I.R.
12.5Ω · F min.
•Measurement after test
0
Perform a heat treatment at 150+
–10°C for one hour and then
let sit for 24±2 hours at room temperature, then measure.
Appearance No marking defects
Capacitance R6, R7, C7, C8: Within ±12.5%
Change
* LLL153C70G474: Within ±20%
D.F.
R6, R7, C7, C8: 0.2 max.
I.R.
25Ω · F min.
16 Durability
Apply 150% of the rated voltage for 1000±12 hours at the
maximum operating temperature ±3°C.
The charge/discharge current is less than 50mA.
•Initial measurement
0
Perform a heat treatment at 150+
–10°C for one hour and then
let sit for 24±2 hours at room temperature. Perform the initial
measurement.
•Measurement after test
0
Perform a heat treatment at 150+
–10°C for one hour and then
let sit for 24±2 hours at room temperature, then measure.
84
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Monolithic Ceramic Capacitors
High-Q Type GJM Series
e
■ Features
g
e
1. Mobile Telecommunication and RF module, mainly
2. Quality improvement of telephone call, Low power
Consumption, yield ratio improvement
T
4
■ Applications
L
W
VCO, PA, Mobile Telecommunication
Part Number
GJM03
GJM15
Dimensions (mm)
L
W
T
e
0.6 ±0.03 0.3 ±0.03 0.3 ±0.03 0.1 to 0.2
1.0 ±0.05 0.5 ±0.05 0.5 ±0.05 0.15 to 0.3
g min.
0.2
0.4
85
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
Temperature Compensating Type C0G(5C)/C0H(6C) Characteristics
3
ex.3: T Dimension [mm]
LxW
[mm]
0.6x0.3
(03)
<0201>
Rated Voltage 25
[Vdc] (1A)
Capacitance
0.1pF(R10)
4
6.3
(0J)
1.0x0.5
(15)
<0402>
50
(1H)
LxW
[mm]
Rated Voltage 25
[Vdc] (1A)
Capacitance
6.3
(0J)
1.0x0.5
(15)
<0402>
50
(1H)
LxW
[mm]
0.6x0.3
(03)
<0201>
Rated Voltage 25
[Vdc] (1A)
Capacitance
6.3
(0J)
1.0x0.5
(15)
<0402>
50
(1H)
5
5.0pF(5R0)
3
5
9.9pF(9R9)
3
5
0.2pF(R20)
3
5
5.1pF(5R1)
3
5
10pF(100)
3
5
0.3pF(R30)
3
5
5.2pF(5R2)
3
5
11pF(110)
3
5
0.4pF(R40)
3
5
5.3pF(5R3)
3
5
12pF(120)
3
5
0.5pF(R50)
3
5
5.4pF(5R4)
3
5
13pF(130)
3
5
0.6pF(R60)
3
5
5.5pF(5R5)
3
5
15pF(150)
3
5
0.7pF(R70)
3
5
5.6pF(5R6)
3
5
16pF(160)
3
5
0.8pF(R80)
3
5
5.7pF(5R7)
3
5
18pF(180)
3
5
0.9pF(R90)
3
5
5.8pF(5R8)
3
5
20pF(200)
3
1.0pF(1R0)
3
5
5.9pF(5R9)
3
5
22pF(220)
3
1.1pF(1R1)
3
5
6.0pF(6R0)
3
5
24pF(240)
3
1.2pF(1R2)
3
5
6.1pF(6R1)
3
5
27pF(270)
3
1.3pF(1R3)
3
5
6.2pF(6R2)
3
5
30pF(300)
3
1.4pF(1R4)
3
5
6.3pF(6R3)
3
5
33pF(330)
3
1.5pF(1R5)
3
5
6.4pF(6R4)
3
5
1.6pF(1R6)
3
5
6.5pF(6R5)
3
5
1.7pF(1R7)
3
5
6.6pF(6R6)
3
5
1.8pF(1R8)
3
5
6.7pF(6R7)
3
5
1.9pF(1R9)
3
5
6.8pF(6R8)
3
5
2.0pF(2R0)
3
5
6.9pF(6R9)
3
5
2.1pF(2R1)
3
5
7.0pF(7R0)
3
5
2.2pF(2R2)
3
5
7.1pF(7R1)
3
5
2.3pF(2R3)
3
5
7.2pF(7R2)
3
5
2.4pF(2R4)
3
5
7.3pF(7R3)
3
5
2.5pF(2R5)
3
5
7.4pF(7R4)
3
5
2.6pF(2R6)
3
5
7.5pF(7R5)
3
5
2.7pF(2R7)
3
5
7.6pF(7R6)
3
5
2.8pF(2R8)
3
5
7.7pF(7R7)
3
5
2.9pF(2R9)
3
5
7.8pF(7R8)
3
5
3.0pF(3R0)
3
5
7.9pF(7R9)
3
5
3.1pF(3R1)
3
5
8.0pF(8R0)
3
5
3.2pF(3R2)
3
5
8.1pF(8R1)
3
5
3.3pF(3R3)
3
5
8.2pF(8R2)
3
5
3.4pF(3R4)
3
5
8.3pF(8R3)
3
5
3.5pF(3R5)
3
5
8.4pF(8R4)
3
5
3.6pF(3R6)
3
5
8.5pF(8R5)
3
5
3.7pF(3R7)
3
5
8.6pF(8R6)
3
5
3.8pF(3R8)
3
5
8.7pF(8R7)
3
5
3.9pF(3R9)
3
5
8.8pF(8R8)
3
5
4.0pF(4R0)
3
5
8.9pF(8R9)
3
5
4.1pF(4R1)
3
5
9.0pF(9R0)
3
5
4.2pF(4R2)
3
5
9.1pF(9R1)
3
5
4.3pF(4R3)
3
5
9.2pF(9R2)
3
5
4.4pF(4R4)
3
5
9.3pF(9R3)
3
5
4.5pF(4R5)
3
5
9.4pF(9R4)
3
5
4.6pF(4R6)
3
5
9.5pF(9R5)
3
5
4.7pF(4R7)
3
5
9.6pF(9R6)
3
5
4.8pF(4R8)
3
5
9.7pF(9R7)
3
5
4.9pF(4R9)
3
5
9.8pF(9R8)
3
5
The part number code is shown in ( ) and Unit is shown in [ ].
86
0.6x0.3
(03)
<0201>
< >: EIA [inch] Code
5
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Compensating Type C0G(5C) Characteristics
LxW [mm]
0.6x0.3(03)<0201>
1.0x0.5(15)<0402>
25(1E)
50(1H)
Rated Volt. [Vdc]
Capacitance
Tolerance
Part Number
0.1pF(R10)
±0.05pF(W)
0.2pF(R20)
±0.05pF(W)
±0.1pF(B)
GJM0335C1ER20BB01D
GJM1555C1HR20BB01D
0.3pF(R30)
±0.05pF(W)
GJM0335C1ER30WB01D
GJM1555C1HR30WB01D
±0.1pF(B)
GJM0335C1ER30BB01D
GJM1555C1HR30BB01D
±0.05pF(W)
GJM0335C1ER40WB01D
GJM1555C1HR40WB01D
±0.1pF(B)
GJM0335C1ER40BB01D
GJM1555C1HR40BB01D
0.5pF(R50)
±0.05pF(W)
GJM0335C1ER50WB01D
GJM1555C1HR50WB01D
±0.1pF(B)
GJM0335C1ER50BB01D
GJM1555C1HR50BB01D
0.6pF(R60)
±0.05pF(W)
GJM0335C1ER60WB01D
GJM1555C1HR60WB01D
±0.1pF(B)
GJM0335C1ER60BB01D
GJM1555C1HR60BB01D
0.7pF(R70)
±0.05pF(W)
GJM0335C1ER70WB01D
GJM1555C1HR70WB01D
±0.1pF(B)
GJM0335C1ER70BB01D
GJM1555C1HR70BB01D
0.8pF(R80)
±0.05pF(W)
GJM0335C1ER80WB01D
GJM1555C1HR80WB01D
±0.1pF(B)
GJM0335C1ER80BB01D
GJM1555C1HR80BB01D
±0.05pF(W)
GJM0335C1ER90WB01D
GJM1555C1HR90WB01D
±0.1pF(B)
GJM0335C1ER90BB01D
GJM1555C1HR90BB01D
±0.05pF(W)
GJM0335C1E1R0WB01D
GJM1555C1H1R0WB01D
GJM1555C1H1R0BB01D
GJM1555C1HR10WB01D
±0.1pF(B)
0.4pF(R40)
0.9pF(R90)
1.0pF(1R0)
1.1pF(1R1)
1.2pF(1R2)
1.3pF(1R3)
1.4pF(1R4)
1.5pF(1R5)
1.6pF(1R6)
1.7pF(1R7)
1.8pF(1R8)
1.9pF(1R9)
2.0pF(2R0)
GJM1555C1HR10BB01D
GJM0335C1ER20WB01D
GJM1555C1HR20WB01D
±0.1pF(B)
GJM0335C1E1R0BB01D
±0.25pF(C)
GJM0335C1E1R0CB01D
GJM1555C1H1R0CB01D
±0.05pF(W)
GJM0335C1E1R1WB01D
GJM1555C1H1R1WB01D
GJM1555C1H1R1BB01D
±0.1pF(B)
GJM0335C1E1R1BB01D
±0.25pF(C)
GJM0335C1E1R1CB01D
GJM1555C1H1R1CB01D
±0.05pF(W)
GJM0335C1E1R2WB01D
GJM1555C1H1R2WB01D
GJM1555C1H1R2BB01D
±0.1pF(B)
GJM0335C1E1R2BB01D
±0.25pF(C)
GJM0335C1E1R2CB01D
GJM1555C1H1R2CB01D
±0.05pF(W)
GJM0335C1E1R3WB01D
GJM1555C1H1R3WB01D
GJM1555C1H1R3BB01D
±0.1pF(B)
GJM0335C1E1R3BB01D
±0.25pF(C)
GJM0335C1E1R3CB01D
GJM1555C1H1R3CB01D
±0.05pF(W)
GJM0335C1E1R4WB01D
GJM1555C1H1R4WB01D
±0.1pF(B)
GJM0335C1E1R4BB01D
GJM1555C1H1R4BB01D
±0.25pF(C)
GJM0335C1E1R4CB01D
GJM1555C1H1R4CB01D
±0.05pF(W)
GJM0335C1E1R5WB01D
GJM1555C1H1R5WB01D
GJM1555C1H1R5BB01D
±0.1pF(B)
GJM0335C1E1R5BB01D
±0.25pF(C)
GJM0335C1E1R5CB01D
GJM1555C1H1R5CB01D
±0.05pF(W)
GJM0335C1E1R6WB01D
GJM1555C1H1R6WB01D
GJM1555C1H1R6BB01D
±0.1pF(B)
GJM0335C1E1R6BB01D
±0.25pF(C)
GJM0335C1E1R6CB01D
GJM1555C1H1R6CB01D
±0.05pF(W)
GJM0335C1E1R7WB01D
GJM1555C1H1R7WB01D
GJM1555C1H1R7BB01D
±0.1pF(B)
GJM0335C1E1R7BB01D
±0.25pF(C)
GJM0335C1E1R7CB01D
GJM1555C1H1R7CB01D
±0.05pF(W)
GJM0335C1E1R8WB01D
GJM1555C1H1R8WB01D
GJM1555C1H1R8BB01D
±0.1pF(B)
GJM0335C1E1R8BB01D
±0.25pF(C)
GJM0335C1E1R8CB01D
GJM1555C1H1R8CB01D
±0.05pF(W)
GJM0335C1E1R9WB01D
GJM1555C1H1R9WB01D
±0.1pF(B)
GJM0335C1E1R9BB01D
GJM1555C1H1R9BB01D
±0.25pF(C)
GJM0335C1E1R9CB01D
GJM1555C1H1R9CB01D
±0.05pF(W)
GJM0335C1E2R0WB01D
GJM1555C1H2R0WB01D
±0.1pF(B)
GJM0335C1E2R0BB01D
GJM1555C1H2R0BB01D
±0.25pF(C)
GJM0335C1E2R0CB01D
GJM1555C1H2R0CB01D
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
qProduct ID
wSeries
tTemperature Characteristics
u i o !0 iCapacitance Tolerance
q w e r t y
Packaging Code in Part Number is a code shows STD 180mm Reel Taping.
(Part Number) GJ
M
03
3
5C 1E
R20 W
4
B01 D
eDimension (LxW)
yRated Voltage
oIndividual Specification Code
rDimension (T)
uCapacitance
!0Packaging
87
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Compensating Type C0G(5C) Characteristics
LxW [mm]
0.6x0.3(03)<0201>
1.0x0.5(15)<0402>
25(1E)
50(1H)
Rated Volt. [Vdc]
Capacitance
Tolerance
2.1pF(2R1)
2.2pF(2R2)
4
2.3pF(2R3)
2.4pF(2R4)
2.5pF(2R5)
2.6pF(2R6)
2.7pF(2R7)
2.8pF(2R8)
2.9pF(2R9)
3.0pF(3R0)
3.1pF(3R1)
3.2pF(3R2)
3.3pF(3R3)
3.4pF(3R4)
3.5pF(3R5)
3.6pF(3R6)
Part Number
±0.05pF(W)
GJM0335C1E2R1WB01D
GJM1555C1H2R1WB01D
±0.1pF(B)
GJM0335C1E2R1BB01D
GJM1555C1H2R1BB01D
±0.25pF(C)
GJM0335C1E2R1CB01D
GJM1555C1H2R1CB01D
±0.05pF(W)
GJM0335C1E2R2WB01D
GJM1555C1H2R2WB01D
±0.1pF(B)
GJM0335C1E2R2BB01D
GJM1555C1H2R2BB01D
±0.25pF(C)
GJM0335C1E2R2CB01D
GJM1555C1H2R2CB01D
±0.05pF(W)
GJM0335C1E2R3WB01D
GJM1555C1H2R3WB01D
GJM1555C1H2R3BB01D
±0.1pF(B)
GJM0335C1E2R3BB01D
±0.25pF(C)
GJM0335C1E2R3CB01D
GJM1555C1H2R3CB01D
±0.05pF(W)
GJM0335C1E2R4WB01D
GJM1555C1H2R4WB01D
GJM1555C1H2R4BB01D
±0.1pF(B)
GJM0335C1E2R4BB01D
±0.25pF(C)
GJM0335C1E2R4CB01D
GJM1555C1H2R4CB01D
±0.05pF(W)
GJM0335C1E2R5WB01D
GJM1555C1H2R5WB01D
GJM1555C1H2R5BB01D
±0.1pF(B)
GJM0335C1E2R5BB01D
±0.25pF(C)
GJM0335C1E2R5CB01D
GJM1555C1H2R5CB01D
±0.05pF(W)
GJM0335C1E2R6WB01D
GJM1555C1H2R6WB01D
GJM1555C1H2R6BB01D
±0.1pF(B)
GJM0335C1E2R6BB01D
±0.25pF(C)
GJM0335C1E2R6CB01D
GJM1555C1H2R6CB01D
±0.05pF(W)
GJM0335C1E2R7WB01D
GJM1555C1H2R7WB01D
±0.1pF(B)
GJM0335C1E2R7BB01D
GJM1555C1H2R7BB01D
±0.25pF(C)
GJM0335C1E2R7CB01D
GJM1555C1H2R7CB01D
±0.05pF(W)
GJM0335C1E2R8WB01D
GJM1555C1H2R8WB01D
±0.1pF(B)
GJM0335C1E2R8BB01D
GJM1555C1H2R8BB01D
±0.25pF(C)
GJM0335C1E2R8CB01D
GJM1555C1H2R8CB01D
±0.05pF(W)
GJM0335C1E2R9WB01D
GJM1555C1H2R9WB01D
±0.1pF(B)
GJM0335C1E2R9BB01D
GJM1555C1H2R9BB01D
±0.25pF(C)
GJM0335C1E2R9CB01D
GJM1555C1H2R9CB01D
±0.05pF(W)
GJM0335C1E3R0WB01D
GJM1555C1H3R0WB01D
GJM1555C1H3R0BB01D
±0.1pF(B)
GJM0335C1E3R0BB01D
±0.25pF(C)
GJM0335C1E3R0CB01D
GJM1555C1H3R0CB01D
±0.05pF(W)
GJM0335C1E3R1WB01D
GJM1555C1H3R1WB01D
±0.1pF(B)
GJM0335C1E3R1BB01D
GJM1555C1H3R1BB01D
±0.25pF(C)
GJM0335C1E3R1CB01D
GJM1555C1H3R1CB01D
±0.05pF(W)
GJM0335C1E3R2WB01D
GJM1555C1H3R2WB01D
GJM1555C1H3R2BB01D
±0.1pF(B)
GJM0335C1E3R2BB01D
±0.25pF(C)
GJM0335C1E3R2CB01D
GJM1555C1H3R2CB01D
±0.05pF(W)
GJM0335C1E3R3WB01D
GJM1555C1H3R3WB01D
GJM1555C1H3R3BB01D
±0.1pF(B)
GJM0335C1E3R3BB01D
±0.25pF(C)
GJM0335C1E3R3CB01D
GJM1555C1H3R3CB01D
±0.05pF(W)
GJM0335C1E3R4WB01D
GJM1555C1H3R4WB01D
±0.1pF(B)
GJM0335C1E3R4BB01D
GJM1555C1H3R4BB01D
±0.25pF(C)
GJM0335C1E3R4CB01D
GJM1555C1H3R4CB01D
±0.05pF(W)
GJM0335C1E3R5WB01D
GJM1555C1H3R5WB01D
±0.1pF(B)
GJM0335C1E3R5BB01D
GJM1555C1H3R5BB01D
±0.25pF(C)
GJM0335C1E3R5CB01D
GJM1555C1H3R5CB01D
±0.05pF(W)
GJM0335C1E3R6WB01D
GJM1555C1H3R6WB01D
±0.1pF(B)
GJM0335C1E3R6BB01D
GJM1555C1H3R6BB01D
±0.25pF(C)
GJM0335C1E3R6CB01D
GJM1555C1H3R6CB01D
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
qProduct ID
wSeries
tTemperature Characteristics
u i o !0 iCapacitance Tolerance
q w e r t y
Packaging Code in Part Number is a code shows STD 180mm Reel Taping.
(Part Number) GJ
88
M
03
3
5C 1E
2R1 W
B01 D
eDimension (LxW)
yRated Voltage
oIndividual Specification Code
rDimension (T)
uCapacitance
!0Packaging
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Compensating Type C0G(5C) Characteristics
LxW [mm]
Rated Volt. [Vdc]
Capacitance
3.7pF(3R7)
3.8pF(3R8)
3.9pF(3R9)
4.0pF(4R0)
4.1pF(4R1)
4.2pF(4R2)
4.3pF(4R3)
4.4pF(4R4)
4.5pF(4R5)
4.6pF(4R6)
4.7pF(4R7)
4.8pF(4R8)
4.9pF(4R9)
5.0pF(5R0)
5.1pF(5R1)
5.2pF(5R2)
0.6x0.3(03)<0201>
1.0x0.5(15)<0402>
25(1E)
50(1H)
Tolerance
Part Number
±0.05pF(W)
GJM0335C1E3R7WB01D
GJM1555C1H3R7WB01D
±0.1pF(B)
GJM0335C1E3R7BB01D
GJM1555C1H3R7BB01D
±0.25pF(C)
GJM0335C1E3R7CB01D
GJM1555C1H3R7CB01D
±0.05pF(W)
GJM0335C1E3R8WB01D
GJM1555C1H3R8WB01D
±0.1pF(B)
GJM0335C1E3R8BB01D
GJM1555C1H3R8BB01D
±0.25pF(C)
GJM0335C1E3R8CB01D
GJM1555C1H3R8CB01D
±0.05pF(W)
GJM0335C1E3R9WB01D
GJM1555C1H3R9WB01D
GJM1555C1H3R9BB01D
±0.1pF(B)
GJM0335C1E3R9BB01D
±0.25pF(C)
GJM0335C1E3R9CB01D
GJM1555C1H3R9CB01D
±0.05pF(W)
GJM0335C1E4R0WB01D
GJM1555C1H4R0WB01D
GJM1555C1H4R0BB01D
±0.1pF(B)
GJM0335C1E4R0BB01D
±0.25pF(C)
GJM0335C1E4R0CB01D
GJM1555C1H4R0CB01D
±0.05pF(W)
GJM0335C1E4R1WB01D
GJM1555C1H4R1WB01D
GJM1555C1H4R1BB01D
±0.1pF(B)
GJM0335C1E4R1BB01D
±0.25pF(C)
GJM0335C1E4R1CB01D
GJM1555C1H4R1CB01D
±0.05pF(W)
GJM0335C1E4R2WB01D
GJM1555C1H4R2WB01D
GJM1555C1H4R2BB01D
±0.1pF(B)
GJM0335C1E4R2BB01D
±0.25pF(C)
GJM0335C1E4R2CB01D
GJM1555C1H4R2CB01D
±0.05pF(W)
GJM0335C1E4R3WB01D
GJM1555C1H4R3WB01D
±0.1pF(B)
GJM0335C1E4R3BB01D
GJM1555C1H4R3BB01D
±0.25pF(C)
GJM0335C1E4R3CB01D
GJM1555C1H4R3CB01D
±0.05pF(W)
GJM0335C1E4R4WB01D
GJM1555C1H4R4WB01D
±0.1pF(B)
GJM0335C1E4R4BB01D
GJM1555C1H4R4BB01D
±0.25pF(C)
GJM0335C1E4R4CB01D
GJM1555C1H4R4CB01D
±0.05pF(W)
GJM0335C1E4R5WB01D
GJM1555C1H4R5WB01D
±0.1pF(B)
GJM0335C1E4R5BB01D
GJM1555C1H4R5BB01D
±0.25pF(C)
GJM0335C1E4R5CB01D
GJM1555C1H4R5CB01D
±0.05pF(W)
GJM0335C1E4R6WB01D
GJM1555C1H4R6WB01D
GJM1555C1H4R6BB01D
±0.1pF(B)
GJM0335C1E4R6BB01D
±0.25pF(C)
GJM0335C1E4R6CB01D
GJM1555C1H4R6CB01D
±0.05pF(W)
GJM0335C1E4R7WB01D
GJM1555C1H4R7WB01D
±0.1pF(B)
GJM0335C1E4R7BB01D
GJM1555C1H4R7BB01D
±0.25pF(C)
GJM0335C1E4R7CB01D
GJM1555C1H4R7CB01D
±0.05pF(W)
GJM0335C1E4R8WB01D
GJM1555C1H4R8WB01D
GJM1555C1H4R8BB01D
±0.1pF(B)
GJM0335C1E4R8BB01D
±0.25pF(C)
GJM0335C1E4R8CB01D
GJM1555C1H4R8CB01D
±0.05pF(W)
GJM0335C1E4R9WB01D
GJM1555C1H4R9WB01D
GJM1555C1H4R9BB01D
±0.1pF(B)
GJM0335C1E4R9BB01D
±0.25pF(C)
GJM0335C1E4R9CB01D
GJM1555C1H4R9CB01D
±0.05pF(W)
GJM0335C1E5R0WB01D
GJM1555C1H5R0WB01D
±0.1pF(B)
GJM0335C1E5R0BB01D
GJM1555C1H5R0BB01D
±0.25pF(C)
GJM0335C1E5R0CB01D
GJM1555C1H5R0CB01D
±0.05pF(W)
GJM0335C1E5R1WB01D
GJM1555C1H5R1WB01D
±0.1pF(B)
GJM0335C1E5R1BB01D
GJM1555C1H5R1BB01D
±0.25pF(C)
GJM0335C1E5R1CB01D
GJM1555C1H5R1CB01D
±0.5pF(D)
GJM0335C1E5R1DB01D
GJM1555C1H5R1DB01D
±0.05pF(W)
GJM0335C1E5R2WB01D
GJM1555C1H5R2WB01D
±0.1pF(B)
GJM0335C1E5R2BB01D
GJM1555C1H5R2BB01D
±0.25pF(C)
GJM0335C1E5R2CB01D
GJM1555C1H5R2CB01D
±0.5pF(D)
GJM0335C1E5R2DB01D
GJM1555C1H5R2DB01D
The part number code is shown in ( ) and Unit is shown in [ ].
4
< >: EIA [inch] Code
89
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Compensating Type C0G(5C) Characteristics
LxW [mm]
0.6x0.3(03)<0201>
1.0x0.5(15)<0402>
25(1E)
50(1H)
Rated Volt. [Vdc]
Capacitance
Tolerance
5.3pF(5R3)
4
5.4pF(5R4)
5.5pF(5R5)
5.6pF(5R6)
5.7pF(5R7)
5.8pF(5R8)
5.9pF(5R9)
6.0pF(6R0)
6.1pF(6R1)
6.2pF(6R2)
6.3pF(6R3)
6.4pF(6R4)
Part Number
±0.05pF(W)
GJM0335C1E5R3WB01D
GJM1555C1H5R3WB01D
±0.1pF(B)
GJM0335C1E5R3BB01D
GJM1555C1H5R3BB01D
±0.25pF(C)
GJM0335C1E5R3CB01D
GJM1555C1H5R3CB01D
±0.5pF(D)
GJM0335C1E5R3DB01D
GJM1555C1H5R3DB01D
±0.05pF(W)
GJM0335C1E5R4WB01D
GJM1555C1H5R4WB01D
±0.1pF(B)
GJM0335C1E5R4BB01D
GJM1555C1H5R4BB01D
±0.25pF(C)
GJM0335C1E5R4CB01D
GJM1555C1H5R4CB01D
±0.5pF(D)
GJM0335C1E5R4DB01D
GJM1555C1H5R4DB01D
±0.05pF(W)
GJM0335C1E5R5WB01D
GJM1555C1H5R5WB01D
±0.1pF(B)
GJM0335C1E5R5BB01D
GJM1555C1H5R5BB01D
±0.25pF(C)
GJM0335C1E5R5CB01D
GJM1555C1H5R5CB01D
±0.5pF(D)
GJM0335C1E5R5DB01D
GJM1555C1H5R5DB01D
±0.05pF(W)
GJM0335C1E5R6WB01D
GJM1555C1H5R6WB01D
±0.1pF(B)
GJM0335C1E5R6BB01D
GJM1555C1H5R6BB01D
±0.25pF(C)
GJM0335C1E5R6CB01D
GJM1555C1H5R6CB01D
±0.5pF(D)
GJM0335C1E5R6DB01D
GJM1555C1H5R6DB01D
±0.05pF(W)
GJM0335C1E5R7WB01D
GJM1555C1H5R7WB01D
±0.1pF(B)
GJM0335C1E5R7BB01D
GJM1555C1H5R7BB01D
±0.25pF(C)
GJM0335C1E5R7CB01D
GJM1555C1H5R7CB01D
±0.5pF(D)
GJM0335C1E5R7DB01D
GJM1555C1H5R7DB01D
±0.05pF(W)
GJM0335C1E5R8WB01D
GJM1555C1H5R8WB01D
±0.1pF(B)
GJM0335C1E5R8BB01D
GJM1555C1H5R8BB01D
±0.25pF(C)
GJM0335C1E5R8CB01D
GJM1555C1H5R8CB01D
±0.5pF(D)
GJM0335C1E5R8DB01D
GJM1555C1H5R8DB01D
±0.05pF(W)
GJM0335C1E5R9WB01D
GJM1555C1H5R9WB01D
±0.1pF(B)
GJM0335C1E5R9BB01D
GJM1555C1H5R9BB01D
±0.25pF(C)
GJM0335C1E5R9CB01D
GJM1555C1H5R9CB01D
±0.5pF(D)
GJM0335C1E5R9DB01D
GJM1555C1H5R9DB01D
±0.05pF(W)
GJM0335C1E6R0WB01D
GJM1555C1H6R0WB01D
±0.1pF(B)
GJM0335C1E6R0BB01D
GJM1555C1H6R0BB01D
±0.25pF(C)
GJM0335C1E6R0CB01D
GJM1555C1H6R0CB01D
±0.5pF(D)
GJM0335C1E6R0DB01D
GJM1555C1H6R0DB01D
±0.05pF(W)
GJM0335C1E6R1WB01D
GJM1555C1H6R1WB01D
±0.1pF(B)
GJM0335C1E6R1BB01D
GJM1555C1H6R1BB01D
±0.25pF(C)
GJM0335C1E6R1CB01D
GJM1555C1H6R1CB01D
±0.5pF(D)
GJM0335C1E6R1DB01D
GJM1555C1H6R1DB01D
±0.05pF(W)
GJM0335C1E6R2WB01D
GJM1555C1H6R2WB01D
±0.1pF(B)
GJM0335C1E6R2BB01D
GJM1555C1H6R2BB01D
±0.25pF(C)
GJM0335C1E6R2CB01D
GJM1555C1H6R2CB01D
±0.5pF(D)
GJM0335C1E6R2DB01D
GJM1555C1H6R2DB01D
±0.05pF(W)
GJM0335C1E6R3WB01D
GJM1555C1H6R3WB01D
±0.1pF(B)
GJM0335C1E6R3BB01D
GJM1555C1H6R3BB01D
±0.25pF(C)
GJM0335C1E6R3CB01D
GJM1555C1H6R3CB01D
±0.5pF(D)
GJM0335C1E6R3DB01D
GJM1555C1H6R3DB01D
±0.05pF(W)
GJM0335C1E6R4WB01D
GJM1555C1H6R4WB01D
±0.1pF(B)
GJM0335C1E6R4BB01D
GJM1555C1H6R4BB01D
±0.25pF(C)
GJM0335C1E6R4CB01D
GJM1555C1H6R4CB01D
±0.5pF(D)
GJM0335C1E6R4DB01D
GJM1555C1H6R4DB01D
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
qProduct ID
wSeries
tTemperature Characteristics
u i o !0 iCapacitance Tolerance
q w e r t y
Packaging Code in Part Number is a code shows STD 180mm Reel Taping.
(Part Number) GJ
90
M
03
3
5C 1E
5R3 W
B01 D
eDimension (LxW)
yRated Voltage
oIndividual Specification Code
rDimension (T)
uCapacitance
!0Packaging
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Compensating Type C0G(5C)/C0H(6C) Characteristics
LxW [mm]
Rated Volt. [Vdc]
Capacitance
6.5pF(6R5)
6.6pF(6R6)
6.7pF(6R7)
6.8pF(6R8)
6.9pF(6R9)
7.0pF(7R0)
7.1pF(7R1)
7.2pF(7R2)
7.3pF(7R3)
7.4pF(7R4)
7.5pF(7R5)
7.6pF(7R6)
7.7pF(7R7)
0.6x0.3(03)<0201>
1.0x0.5(15)<0402>
25(1E)
50(1H)
Tolerance
Part Number
±0.05pF(W)
GJM0335C1E6R5WB01D
GJM1555C1H6R5WB01D
±0.1pF(B)
GJM0335C1E6R5BB01D
GJM1555C1H6R5BB01D
±0.25pF(C)
GJM0335C1E6R5CB01D
GJM1555C1H6R5CB01D
±0.5pF(D)
GJM0335C1E6R5DB01D
GJM1555C1H6R5DB01D
±0.05pF(W)
GJM0335C1E6R6WB01D
GJM1555C1H6R6WB01D
±0.1pF(B)
GJM0335C1E6R6BB01D
GJM1555C1H6R6BB01D
±0.25pF(C)
GJM0335C1E6R6CB01D
GJM1555C1H6R6CB01D
±0.5pF(D)
GJM0335C1E6R6DB01D
GJM1555C1H6R6DB01D
±0.05pF(W)
GJM0335C1E6R7WB01D
GJM1555C1H6R7WB01D
±0.1pF(B)
GJM0335C1E6R7BB01D
GJM1555C1H6R7BB01D
±0.25pF(C)
GJM0335C1E6R7CB01D
GJM1555C1H6R7CB01D
±0.5pF(D)
GJM0335C1E6R7DB01D
GJM1555C1H6R7DB01D
±0.05pF(W)
GJM0335C1E6R8WB01D
GJM1555C1H6R8WB01D
±0.1pF(B)
GJM0335C1E6R8BB01D
GJM1555C1H6R8BB01D
±0.25pF(C)
GJM0335C1E6R8CB01D
GJM1555C1H6R8CB01D
±0.5pF(D)
GJM0335C1E6R8DB01D
GJM1555C1H6R8DB01D
±0.05pF(W)
GJM0336C1E6R9WB01D
GJM1555C1H6R9WB01D
±0.1pF(B)
GJM0336C1E6R9BB01D
GJM1555C1H6R9BB01D
±0.25pF(C)
GJM0336C1E6R9CB01D
GJM1555C1H6R9CB01D
±0.5pF(D)
GJM0336C1E6R9DB01D
GJM1555C1H6R9DB01D
±0.05pF(W)
GJM0336C1E7R0WB01D
GJM1555C1H7R0WB01D
±0.1pF(B)
GJM0336C1E7R0BB01D
GJM1555C1H7R0BB01D
±0.25pF(C)
GJM0336C1E7R0CB01D
GJM1555C1H7R0CB01D
±0.5pF(D)
GJM0336C1E7R0DB01D
GJM1555C1H7R0DB01D
±0.05pF(W)
GJM0336C1E7R1WB01D
GJM1555C1H7R1WB01D
±0.1pF(B)
GJM0336C1E7R1BB01D
GJM1555C1H7R1BB01D
±0.25pF(C)
GJM0336C1E7R1CB01D
GJM1555C1H7R1CB01D
±0.5pF(D)
GJM0336C1E7R1DB01D
GJM1555C1H7R1DB01D
±0.05pF(W)
GJM0336C1E7R2WB01D
GJM1555C1H7R2WB01D
±0.1pF(B)
GJM0336C1E7R2BB01D
GJM1555C1H7R2BB01D
±0.25pF(C)
GJM0336C1E7R2CB01D
GJM1555C1H7R2CB01D
±0.5pF(D)
GJM0336C1E7R2DB01D
GJM1555C1H7R2DB01D
±0.05pF(W)
GJM0336C1E7R3WB01D
GJM1555C1H7R3WB01D
±0.1pF(B)
GJM0336C1E7R3BB01D
GJM1555C1H7R3BB01D
±0.25pF(C)
GJM0336C1E7R3CB01D
GJM1555C1H7R3CB01D
±0.5pF(D)
GJM0336C1E7R3DB01D
GJM1555C1H7R3DB01D
±0.05pF(W)
GJM0336C1E7R4WB01D
GJM1555C1H7R4WB01D
±0.1pF(B)
GJM0336C1E7R4BB01D
GJM1555C1H7R4BB01D
±0.25pF(C)
GJM0336C1E7R4CB01D
GJM1555C1H7R4CB01D
±0.5pF(D)
GJM0336C1E7R4DB01D
GJM1555C1H7R4DB01D
±0.05pF(W)
GJM0336C1E7R5WB01D
GJM1555C1H7R5WB01D
±0.1pF(B)
GJM0336C1E7R5BB01D
GJM1555C1H7R5BB01D
±0.25pF(C)
GJM0336C1E7R5CB01D
GJM1555C1H7R5CB01D
±0.5pF(D)
GJM0336C1E7R5DB01D
GJM1555C1H7R5DB01D
±0.05pF(W)
GJM0336C1E7R6WB01D
GJM1555C1H7R6WB01D
±0.1pF(B)
GJM0336C1E7R6BB01D
GJM1555C1H7R6BB01D
±0.25pF(C)
GJM0336C1E7R6CB01D
GJM1555C1H7R6CB01D
±0.5pF(D)
GJM0336C1E7R6DB01D
GJM1555C1H7R6DB01D
±0.05pF(W)
GJM0336C1E7R7WB01D
GJM1555C1H7R7WB01D
±0.1pF(B)
GJM0336C1E7R7BB01D
GJM1555C1H7R7BB01D
±0.25pF(C)
GJM0336C1E7R7CB01D
GJM1555C1H7R7CB01D
±0.5pF(D)
GJM0336C1E7R7DB01D
GJM1555C1H7R7DB01D
The part number code is shown in ( ) and Unit is shown in [ ].
4
< >: EIA [inch] Code
91
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Compensating Type C0G(5C)/C0H(6C) Characteristics
LxW [mm]
0.6x0.3(03)<0201>
1.0x0.5(15)<0402>
25(1E)
50(1H)
Rated Volt. [Vdc]
Capacitance
Tolerance
7.8pF(7R8)
4
7.9pF(7R9)
8.0pF(8R0)
8.1pF(8R1)
8.2pF(8R2)
8.3pF(8R3)
8.4pF(8R4)
8.5pF(8R5)
8.6pF(8R6)
8.7pF(8R7)
8.8pF(8R8)
8.9pF(8R9)
Part Number
±0.05pF(W)
GJM0336C1E7R8WB01D
GJM1555C1H7R8WB01D
±0.1pF(B)
GJM0336C1E7R8BB01D
GJM1555C1H7R8BB01D
±0.25pF(C)
GJM0336C1E7R8CB01D
GJM1555C1H7R8CB01D
±0.5pF(D)
GJM0336C1E7R8DB01D
GJM1555C1H7R8DB01D
±0.05pF(W)
GJM0336C1E7R9WB01D
GJM1555C1H7R9WB01D
±0.1pF(B)
GJM0336C1E7R9BB01D
GJM1555C1H7R9BB01D
±0.25pF(C)
GJM0336C1E7R9CB01D
GJM1555C1H7R9CB01D
±0.5pF(D)
GJM0336C1E7R9DB01D
GJM1555C1H7R9DB01D
±0.05pF(W)
GJM0336C1E8R0WB01D
GJM1555C1H8R0WB01D
±0.1pF(B)
GJM0336C1E8R0BB01D
GJM1555C1H8R0BB01D
±0.25pF(C)
GJM0336C1E8R0CB01D
GJM1555C1H8R0CB01D
±0.5pF(D)
GJM0336C1E8R0DB01D
GJM1555C1H8R0DB01D
±0.05pF(W)
GJM0336C1E8R1WB01D
GJM1555C1H8R1WB01D
±0.1pF(B)
GJM0336C1E8R1BB01D
GJM1555C1H8R1BB01D
±0.25pF(C)
GJM0336C1E8R1CB01D
GJM1555C1H8R1CB01D
±0.5pF(D)
GJM0336C1E8R1DB01D
GJM1555C1H8R1DB01D
±0.05pF(W)
GJM0336C1E8R2WB01D
GJM1555C1H8R2WB01D
±0.1pF(B)
GJM0336C1E8R2BB01D
GJM1555C1H8R2BB01D
±0.25pF(C)
GJM0336C1E8R2CB01D
GJM1555C1H8R2CB01D
±0.5pF(D)
GJM0336C1E8R2DB01D
GJM1555C1H8R2DB01D
±0.05pF(W)
GJM0336C1E8R3WB01D
GJM1555C1H8R3WB01D
±0.1pF(B)
GJM0336C1E8R3BB01D
GJM1555C1H8R3BB01D
±0.25pF(C)
GJM0336C1E8R3CB01D
GJM1555C1H8R3CB01D
±0.5pF(D)
GJM0336C1E8R3DB01D
GJM1555C1H8R3DB01D
±0.05pF(W)
GJM0336C1E8R4WB01D
GJM1555C1H8R4WB01D
±0.1pF(B)
GJM0336C1E8R4BB01D
GJM1555C1H8R4BB01D
±0.25pF(C)
GJM0336C1E8R4CB01D
GJM1555C1H8R4CB01D
±0.5pF(D)
GJM0336C1E8R4DB01D
GJM1555C1H8R4DB01D
±0.05pF(W)
GJM0336C1E8R5WB01D
GJM1555C1H8R5WB01D
±0.1pF(B)
GJM0336C1E8R5BB01D
GJM1555C1H8R5BB01D
±0.25pF(C)
GJM0336C1E8R5CB01D
GJM1555C1H8R5CB01D
±0.5pF(D)
GJM0336C1E8R5DB01D
GJM1555C1H8R5DB01D
±0.05pF(W)
GJM0336C1E8R6WB01D
GJM1555C1H8R6WB01D
±0.1pF(B)
GJM0336C1E8R6BB01D
GJM1555C1H8R6BB01D
±0.25pF(C)
GJM0336C1E8R6CB01D
GJM1555C1H8R6CB01D
±0.5pF(D)
GJM0336C1E8R6DB01D
GJM1555C1H8R6DB01D
±0.05pF(W)
GJM0336C1E8R7WB01D
GJM1555C1H8R7WB01D
±0.1pF(B)
GJM0336C1E8R7BB01D
GJM1555C1H8R7BB01D
±0.25pF(C)
GJM0336C1E8R7CB01D
GJM1555C1H8R7CB01D
±0.5pF(D)
GJM0336C1E8R7DB01D
GJM1555C1H8R7DB01D
±0.05pF(W)
GJM0336C1E8R8WB01D
GJM1555C1H8R8WB01D
±0.1pF(B)
GJM0336C1E8R8BB01D
GJM1555C1H8R8BB01D
±0.25pF(C)
GJM0336C1E8R8CB01D
GJM1555C1H8R8CB01D
±0.5pF(D)
GJM0336C1E8R8DB01D
GJM1555C1H8R8DB01D
±0.05pF(W)
GJM0336C1E8R9WB01D
GJM1555C1H8R9WB01D
±0.1pF(B)
GJM0336C1E8R9BB01D
GJM1555C1H8R9BB01D
±0.25pF(C)
GJM0336C1E8R9CB01D
GJM1555C1H8R9CB01D
±0.5pF(D)
GJM0336C1E8R9DB01D
GJM1555C1H8R9DB01D
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
qProduct ID
wSeries
tTemperature Characteristics
u i o !0 iCapacitance Tolerance
q w e r t y
Packaging Code in Part Number is a code shows STD 180mm Reel Taping.
(Part Number) GJ
92
M
03
3
6C 1E
7R8 W
B01 D
eDimension (LxW)
yRated Voltage
oIndividual Specification Code
rDimension (T)
uCapacitance
!0Packaging
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Compensating Type C0G(5C)/C0H(6C) Characteristics
LxW [mm]
Rated Volt. [Vdc]
Capacitance
9.0pF(9R0)
9.1pF(9R1)
9.2pF(9R2)
9.3pF(9R3)
9.4pF(9R4)
9.5pF(9R5)
9.6pF(9R6)
9.7pF(9R7)
9.8pF(9R8)
9.9pF(9R9)
0.6x0.3(03)<0201>
1.0x0.5(15)<0402>
25(1E)
50(1H)
Tolerance
Part Number
±0.05pF(W)
GJM0336C1E9R0WB01D
GJM1555C1H9R0WB01D
±0.1pF(B)
GJM0336C1E9R0BB01D
GJM1555C1H9R0BB01D
±0.25pF(C)
GJM0336C1E9R0CB01D
GJM1555C1H9R0CB01D
±0.5pF(D)
GJM0336C1E9R0DB01D
GJM1555C1H9R0DB01D
±0.05pF(W)
GJM0336C1E9R1WB01D
GJM1555C1H9R1WB01D
±0.1pF(B)
GJM0336C1E9R1BB01D
GJM1555C1H9R1BB01D
±0.25pF(C)
GJM0336C1E9R1CB01D
GJM1555C1H9R1CB01D
±0.5pF(D)
GJM0336C1E9R1DB01D
GJM1555C1H9R1DB01D
±0.05pF(W)
GJM0336C1E9R2WB01D
GJM1555C1H9R2WB01D
±0.1pF(B)
GJM0336C1E9R2BB01D
GJM1555C1H9R2BB01D
±0.25pF(C)
GJM0336C1E9R2CB01D
GJM1555C1H9R2CB01D
±0.5pF(D)
GJM0336C1E9R2DB01D
GJM1555C1H9R2DB01D
±0.05pF(W)
GJM0336C1E9R3WB01D
GJM1555C1H9R3WB01D
±0.1pF(B)
GJM0336C1E9R3BB01D
GJM1555C1H9R3BB01D
±0.25pF(C)
GJM0336C1E9R3CB01D
GJM1555C1H9R3CB01D
±0.5pF(D)
GJM0336C1E9R3DB01D
GJM1555C1H9R3DB01D
±0.05pF(W)
GJM0336C1E9R4WB01D
GJM1555C1H9R4WB01D
±0.1pF(B)
GJM0336C1E9R4BB01D
GJM1555C1H9R4BB01D
±0.25pF(C)
GJM0336C1E9R4CB01D
GJM1555C1H9R4CB01D
±0.5pF(D)
GJM0336C1E9R4DB01D
GJM1555C1H9R4DB01D
±0.05pF(W)
GJM0336C1E9R5WB01D
GJM1555C1H9R5WB01D
±0.1pF(B)
GJM0336C1E9R5BB01D
GJM1555C1H9R5BB01D
±0.25pF(C)
GJM0336C1E9R5CB01D
GJM1555C1H9R5CB01D
±0.5pF(D)
GJM0336C1E9R5DB01D
GJM1555C1H9R5DB01D
±0.05pF(W)
GJM0336C1E9R6WB01D
GJM1555C1H9R6WB01D
±0.1pF(B)
GJM0336C1E9R6BB01D
GJM1555C1H9R6BB01D
±0.25pF(C)
GJM0336C1E9R6CB01D
GJM1555C1H9R6CB01D
±0.5pF(D)
GJM0336C1E9R6DB01D
GJM1555C1H9R6DB01D
±0.05pF(W)
GJM0336C1E9R7WB01D
GJM1555C1H9R7WB01D
±0.1pF(B)
GJM0336C1E9R7BB01D
GJM1555C1H9R7BB01D
±0.25pF(C)
GJM0336C1E9R7CB01D
GJM1555C1H9R7CB01D
±0.5pF(D)
GJM0336C1E9R7DB01D
GJM1555C1H9R7DB01D
±0.05pF(W)
GJM0336C1E9R8WB01D
GJM1555C1H9R8WB01D
±0.1pF(B)
GJM0336C1E9R8BB01D
GJM1555C1H9R8BB01D
±0.25pF(C)
GJM0336C1E9R8CB01D
GJM1555C1H9R8CB01D
±0.5pF(D)
GJM0336C1E9R8DB01D
GJM1555C1H9R8DB01D
±0.05pF(W)
GJM0336C1E9R9WB01D
GJM1555C1H9R9WB01D
±0.1pF(B)
GJM0336C1E9R9BB01D
GJM1555C1H9R9BB01D
±0.25pF(C)
GJM0336C1E9R9CB01D
GJM1555C1H9R9CB01D
±0.5pF(D)
GJM0336C1E9R9DB01D
GJM1555C1H9R9DB01D
The part number code is shown in ( ) and Unit is shown in [ ].
4
< >: EIA [inch] Code
93
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Compensating Type C0G(5C)/C0H(6C) Characteristics
0.6x0.3(03)<0201>
LxW [mm]
25(1E)
Rated Volt. [Vdc]
Capacitance
Tolerance
50(1H)
Part Number
±2%(G)
GJM0336C1E100GB01D
±5%(J)
GJM0336C1E100JB01D
GJM1555C1H100JB01D
11pF(110)
±2%(G)
GJM0336C1E110GB01D
GJM1555C1H110GB01D
±5%(J)
GJM0336C1E110JB01D
GJM1555C1H110JB01D
12pF(120)
±2%(G)
GJM0336C1E120GB01D
GJM1555C1H120GB01D
±5%(J)
GJM0336C1E120JB01D
GJM1555C1H120JB01D
13pF(130)
±2%(G)
GJM0336C1E130GB01D
GJM1555C1H130GB01D
±5%(J)
GJM0336C1E130JB01D
GJM1555C1H130JB01D
15pF(150)
±2%(G)
GJM0336C1E150GB01D
GJM1555C1H150GB01D
±5%(J)
GJM0336C1E150JB01D
GJM1555C1H150JB01D
±2%(G)
GJM0336C1E160GB01D
GJM1555C1H160GB01D
±5%(J)
GJM0336C1E160JB01D
GJM1555C1H160JB01D
18pF(180)
±2%(G)
GJM0336C1E180GB01D
GJM1555C1H180GB01D
±5%(J)
GJM0336C1E180JB01D
GJM1555C1H180JB01D
20pF(200)
±2%(G)
GJM0336C1E200GB01D
GJM1555C1H200GB01D
±5%(J)
GJM0336C1E200JB01D
GJM1555C1H200JB01D
10pF(100)
4
1.0x0.5(15)<0402>
6.3(0J)
16pF(160)
22pF(220)
±2%(G)
GJM1555C1H100GB01D
GJM0335C0J220GB01D
±5%(J)
GJM0335C0J220JB01D
24pF(240)
±2%(G)
GJM0335C0J240GB01D
±5%(J)
GJM0335C0J240JB01D
27pF(270)
±2%(G)
GJM0335C0J270GB01D
±5%(J)
GJM0335C0J270JB01D
30pF(300)
±2%(G)
GJM0335C0J300GB01D
±5%(J)
GJM0335C0J300JB01D
33pF(330)
±2%(G)
GJM0335C0J330GB01D
±5%(J)
GJM0335C0J330JB01D
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
qProduct ID
wSeries
tTemperature Characteristics
u i o !0 iCapacitance Tolerance
q w e r t y
Packaging Code in Part Number is a code shows STD 180mm Reel Taping.
(Part Number) GJ
94
M
03
3
6C 1E
100
G
B01 D
eDimension (LxW)
yRated Voltage
oIndividual Specification Code
rDimension (T)
uCapacitance
!0Packaging
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GJM Series Specifications and Test Methods
(1) Specifications and Test Methods
GJM Series
Specifications
No.
Item
Test Method
Temperature Compensating Type
1
Operating
Temperature Range
Y55 to W125D
Reference Temperature: 25D
(2C, 3C, 4C: 20D)
2
Rated Voltage
See the previous pages.
The rated voltage is defined as the maximum voltage which
may be applied continuously to the capacitor.
When AC voltage is superimposed on DC voltage, VP-P or VO-P,
whichever is larger, should be maintained within the rated
voltage range.
3
Appearance
No defects or abnormalities
Visual inspection
4
Dimensions
Within the specified dimensions
Using calipers
5
Dielectric Strength
No defects or abnormalities
No failure should be observed when 300% of the rated voltage
is applied between the terminations for 1 to 5 seconds,
provided the charge/discharge current is less than 50mA.
6
Insulation Resistance
10,000MΩ min. or 500Ω · F min. (Whichever is smaller)
(I.R.)
7
Capacitance
Within the specified tolerance
8
Q
30pF and over: QU1000
30pF and below: QU400W20C
C: Nominal Capacitance (pF)
Temperature
Coefficient
9
Capacitance
Temperature
Characteristics Capacitance
Drift
Within the specified tolerance (Table A)
Within T0.2% or T0.05pF
(Whichever is larger.)
4
The insulation resistance should be measured with a DC
voltage not exceeding the rated voltage at 25D and 75%RH
max. and within 2 minutes of charging.
The capacitance/Q should be measured at 25D at the
frequency and voltage shown in the table.
1T0.1MHz
Frequency
0.5 to 5Vrms
Voltage
The capacitance change should be measured after 5 min. at
each specified temperature stage.
Temperature Compensating Type
The temperature coefficient is determined using the
capacitance measured in step 3 as a reference.
When cycling the temperature sequentially from step 1 through
5, (5C: W25 to 125D: other temp. coeffs.: W20 to 125D) the
capacitance should be within the specified tolerance for the
temperature coefficient and capacitance change as Table A.
The capacitance drift is calculated by dividing the differences
between the maximum and minimum measured values in steps
1, 3 and 5 by the capacitance value in step 3.
Step
1
Temperature (D)
Reference Temp. T2
2
Y55T3
3
Reference Temp. T2
4
125T3
5
Reference Temp. T2
Solder the capacitor to the test jig (glass epoxy board) shown in
Fig. 1 using a eutectic solder. Then apply a 5N* force in parallel
with the test jig for 10T1 sec. The soldering should be done either
with an iron or using the reflow method and should be conducted
with care so that the soldering is uniform and free of defects such
as heat shock.
*2N (GJM03)
Adhesive Strength
of Termination
No removal of the terminations or other defect should occur.
a
10
b
c
Solder resist
Baked electrode or
copper foil
Type
GJM03
GJM15
a
0.3
0.4
b
0.9
1.5
c
0.3
0.5
(in mm)
Fig. 1
Continued on the following page.
95
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GJM Series Specifications and Test Methods (1)
Continued from the preceding page.
Specifications
No.
Item
Test Method
Temperature Compensating Type
4
No defects or abnormalities
Capacitance
Within the specified tolerance
Q
30pF and over: QU1000
30pF and below: QU400W20C
C: Nominal Capacitance (pF)
Appearance
No marking defects
Capacitance
Change
Within T5% or T0.5pF
(Whichever is larger)
Vibration
Resistance
12
φ4.5
VWZ[§¨«¬©X¥T°±­_`\¦U®ª«]YZSTW¤¥¨¢£§QRV,^¯
[¬
Y]^ª®¯Z«
b
Solder the capacitor to the test jig (glass epoxy board) in the
same manner and under the same conditions as (10).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz.
The frequency range, from 10 to 55Hz and return to 10Hz,
should be traversed in approximately 1 minute. This motion
should be applied for a period of 2 hours in each of 3 mutually
perpendicular directions (total of 6 hours).
c
Deflection
Solder the capacitor to the test jig (glass epoxy boards) shown
in Fig. 2 using a eutectic solder.
Then apply a force in the direction shown in Fig. 3.
The soldering should be done by the reflow method and should
be conducted with care so that the soldering is uniform and free
of defects such as heat shock.
20
40
11
Appearance
R230
a
t: 0.8mm
100
Type
GJM03
GJM15
a
0.3
0.4
50 Pressurizing
speed : 1.0mm/sec.
Pressurize
b
0.9
1.5
c
0.3
0.5
Flexure : V1
Capacitance meter
45
45
(in mm)
(in mm)
Fig. 2
Fig. 3
13
Solderability of
Termination
75% of the terminations are to be soldered evenly and
continuously.
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion).
Preheat at 80 to 120D for 10 to 30 seconds. After preheating,
immerse in eutectic solder solution for 2T0.5 seconds at 230T5D
or Sn-3.0Ag-0.5Cu solder solution for 2±0.5 seconds at 245±5°C.
The measured and observed characteristics should satisfy the
specifications in the following table.
Resistance
14 to Soldering
Heat
Appearance
No marking defects
Capacitance
Change
Within T2.5% or T0.25pF
(Whichever is larger)
Q
30pF and over: QU1000
30pF and below: QU400W20C
C: Nominal Capacitance (pF)
I.R.
More than 10,000MΩ or 500Ω · F (Whichever is smaller)
Dielectric
Strength
No failure
Preheat the capacitor at 120 to 150D for 1 minute.
Immerse the capacitor in a eutectic solder or Sn-3.0Ag-0.5Cu
solder solution at 270T5D for 10T0.5 seconds.
Let sit at room temperature for 24T2 hours.
The measured and observed characteristics should satisfy the
specifications in the following table.
15
Fix the capacitor to the supporting jig in the same manner and
under the same conditions as (10). Perform the five cycles
according to the four heat treatments listed in the following table.
Let sit for 24T2 hours at room temperature, then measure.
Appearance
No marking defects
Capacitance
Change
Within T2.5% or T0.25pF
(Whichever is larger)
Q
30pF and over: QU1000
30pF and below: QU400W20C
C: Nominal Capacitance (pF)
Temp. (D)
I.R.
More than 10,000MΩ or 500Ω · F (Whichever is smaller)
Time (min.)
Dielectric
Strength
No failure
Temperature
Cycle
Step
1
2
3
4
Min. Operating Room Max. Operating Room
W0
W3
Temp. Y3
Temp. Y0
Temp.
Temp.
30T3
2 to 3
30T3
2 to 3
The measured and observed characteristics should satisfy the
specifications in the following table.
16
Humidity,
Steady
State
Appearance
No marking defects
Capacitance
Change
Within T5% or T0.5pF
(Whichever is larger)
Q
30pF and below:
QU350
10pF and over, 30pF and below: QU275W 5
2 C
10pF and below:
QU200W10C
C: Nominal Capacitance (pF)
I.R.
More than 10,000MΩ or 500Ω · F (Whichever is smaller)
Let the capacitor sit at 40T2D and 90 to 95% humidity for
500T12 hours.
Remove and let sit for 24T2 hours (temperature compensating
type) at room temperature, then measure.
Continued on the following page.
96
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GJM Series Specifications and Test Methods
(1) Specifications and Test Methods
GJM Series
Continued from the preceding page.
Specifications
No.
Item
Test Method
Temperature Compensating Type
The measured and observed characteristics should satisfy the
specifications in the following table.
17
Humidity
Load
Appearance
No marking defects
Capacitance
Change
Within T7.5% or T0.75pF
(Whichever is larger)
Q
30pF and over: QU200
30pF and below: QU100W 10
3 C
C: Nominal Capacitance (pF)
I.R.
More than 500MΩ or 25Ω · F (Whichever is smaller)
Apply the rated voltage at 40T2D and 90 to 95% humidity for
500T12 hours.
Remove and let sit for 24T2 hours at room temperature, then
measure. The charge/discharge current is less than 50mA.
4
The measured and observed characteristics should satisfy the
specifications in the following table.
18
19
High
Temperature
Load
ESR
Appearance
No marking defects
Capacitance
Change
Within T3% or T0.3pF
(Whichever is larger)
Q
30pF and over:
QU350
10pF and over, 30pF and below: QU275W 5
2 C
10pF and below:
QU200W10C
C: Nominal Capacitance (pF)
I.R.
More than 1,000MΩ or 50Ω · F (Whichever is smaller)
Apply 200% of the rated voltage for 1000T12 hours at the
maximum operating temperature T3D. Let sit for 24T2 hours
(temperature compensating type) at room temperature, then
measure.
The charge/discharge current is less than 50mA.
0.1pFVCV1pF: 350mΩ · pF below
1pFFCV5pF: 300mΩ below
5pFFCV10pF: 250mΩ below
The ESR should be measured at room temperature, and
frequency 1T0.2GHz with the equivalent of BOONTON Model
34A.
10pFFCV33pF: 400mΩ below
The ESR should be measured at room temperature, and
frequency 500T50MHz with the equivalent of HP8753B.
Table A
(1)
Capacitance Change from 25D Value (%)
Char. Code
Temp. Coeff.
(ppm/D) *1
Y30D
Y55D
Max.
Min.
Y0.24
0T30
0.58
5C
Y0.48
0T60
0.87
6C
*1: Nominal values denote the temperature coefficient within a range of 25 to 125D.
Max.
0.40
0.60
Y10D
Min.
Y0.17
Y0.33
Max.
0.25
0.38
Min.
Y0.11
Y0.21
(2)
Capacitance Change from 20D Value (%)
Char.
Nominal Values
(ppm/D) *2
Y25D
Y55D
Max.
Min.
Y0.45
0T60
0.82
2C
Y0.90
0T120
1.37
3C
Y1.88
0T250
2.56
4C
*2: Nominal values denote the temperature coefficient within a range of 20 to 125D.
Max.
0.49
0.82
1.54
Y10D
Min.
Y0.27
Y0.54
Y1.13
Max.
0.33
0.55
1.02
Min.
Y0.18
Y0.36
Y0.75
97
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Monolithic Ceramic Capacitors
High Frequency GQM Series
e
g
e
■ Features
5
T
1. HiQ and low ESR at VHF, UHF, Microwave
2. Feature improvement, low power consumption for
mobile telecommunication. (Base station, terminal,
etc.)
L
■ Applications
Part Number
High frequency circuit (Mobile telecommunication, etc.)
GQM187
GQM188
GQM219 (50,100V)
GQM219 (250V)
L
1.6 ±0.15
1.6 ±0.1
2.0 ±0.1
2.0 ±0.15
W
Dimensions (mm)
W
T
e
g min.
0.8 ±0.15 0.7 ±0.1 0.2 to 0.5 0.5
0.8 ±0.1
0.8 ±0.1 0.2 to 0.5 0.5
1.25 ±0.1 0.85 ±0.1 0.2 to 0.7 0.7
1.25 ±0.15 0.85 ±0.15 0.2 to 0.7 0.7
Capacitance Table
Temperature Compensating Type C0G(5C) Characteristics
7
ex.7: T Dimension [mm]
C0G(5C)
TC
1.6x0.8
(18)
<0603>
LxW
[mm]
Rated Voltage
[Vdc]
250
(2E)
0.10pF(R10)
0.20pF(R20)
50
(1H)
250
(2E)
LxW
[mm]
250
(2E)
50
(1H)
250
(2E)
100
(2A)
7
7.5pF(7R5)
7
8.0pF(8R0)
7
8
9
9
7
8
9
0.30pF(R30)
7
9
8.2pF(8R2)
7
8
9
9
0.40pF(R40)
7
9.0pF(9R0)
7
8
9
9
0.50pF(R50)
7
8
9
0.75pF(R75)
7
8
9
9
9.1pF(9R1)
7
8
9
9
9
10pF(100)
7
8
9
1.0pF(1R0)
7
8
9
9
9
11pF(110)
7
8
9
1.1pF(1R1)
7
9
8
9
9
12pF(120)
7
8
9
9
1.2pF(1R2)
7
8
9
9
13pF(130)
7
8
9
9
1.3pF(1R3)
7
8
9
9
15pF(150)
7
8
9
9
1.5pF(1R5)
7
8
9
9
16pF(160)
7
8
9
9
1.6pF(1R6)
7
8
9
9
18pF(180)
7
8
9
9
1.8pF(1R8)
7
8
9
9
20pF(200)
7
8
9
9
2.0pF(2R0)
7
8
9
9
22pF(220)
7
8
9
9
2.2pF(2R2)
7
8
9
9
24pF(240)
7
8
9
9
2.4pF(2R4)
7
8
9
9
27pF(270)
7
8
9
9
2.7pF(2R7)
7
8
9
9
30pF(300)
7
8
9
9
3.0pF(3R0)
7
8
9
9
33pF(330)
7
8
9
9
3.3pF(3R3)
7
8
9
9
36pF(360)
7
8
9
9
3.6pF(3R6)
7
8
9
9
39pF(390)
7
8
9
9
3.9pF(3R9)
7
8
9
9
43pF(430)
7
8
9
9
4.0pF(4R0)
7
8
9
9
47pF(470)
7
8
9
9
4.3pF(4R3)
7
8
9
9
51pF(510)
8
9
9
4.7pF(4R7)
7
8
9
9
56pF(560)
8
9
9
9
62pF(620)
8
9
9
Capacitance
100
(2A)
2.0x1.25
(21)
<0805>
50
(1H)
50
(1H)
5.0pF(5R0)
7
8
9
5.1pF(5R1)
7
8
9
9
68pF(680)
8
9
9
5.6pF(5R6)
7
8
9
9
75pF(750)
8
9
9
6.0pF(6R0)
7
8
9
9
82pF(820)
8
9
9
6.2pF(6R2)
7
8
9
9
91pF(910)
8
9
9
6.8pF(6R8)
7
8
9
9
100pF(101)
8
9
9
7.0pF(7R0)
7
8
9
The part number code is shown in ( ) and Unit is shown in [ ].
98
100
(2A)
1.6x0.8
(18)
<0603>
Rated Voltage
[Vdc]
Capacitance
100
(2A)
C0G(5C)
TC
2.0x1.25
(21)
<0805>
9
< >: EIA [inch] Code
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Compensating Type C0G(5C) Characteristics
1.6x0.8(18)<0603>
LxW [mm]
250(2E)
Rated Volt. [Vdc]
Capacitance
Tolerance
100(2A)
Part Number
0.10pF(R10)
±0.1pF(B)
GQM1875C2ER10BB12D
0.20pF(R20)
±0.1pF(B)
GQM1875C2ER20BB12D
0.30pF(R30)
±0.1pF(B)
GQM1875C2ER30BB12D
±0.25pF(C)
GQM1875C2ER30CB12D
±0.1pF(B)
GQM1875C2ER40BB12D
±0.25pF(C)
GQM1875C2ER40CB12D
±0.1pF(B)
GQM1875C2ER50BB12D
GQM1885C2AR50BB01D
±0.25pF(C)
GQM1875C2ER50CB12D
GQM1885C2AR50CB01D
0.40pF(R40)
0.50pF(R50)
0.75pF(R75)
1.0pF(1R0)
1.1pF(1R1)
1.2pF(1R2)
1.3pF(1R3)
1.5pF(1R5)
1.6pF(1R6)
1.8pF(1R8)
2.0pF(2R0)
2.2pF(2R2)
2.4pF(2R4)
2.7pF(2R7)
3.0pF(3R0)
3.3pF(3R3)
3.6pF(3R6)
3.9pF(3R9)
4.0pF(4R0)
4.3pF(4R3)
4.7pF(4R7)
5.0pF(5R0)
±0.1pF(B)
GQM1875C2ER75BB12D
GQM1885C2AR75BB01D
±0.25pF(C)
GQM1875C2ER75CB12D
GQM1885C2AR75CB01D
±0.1pF(B)
GQM1875C2E1R0BB12D
GQM1885C2A1R0BB01D
±0.25pF(C)
GQM1875C2E1R0CB12D
GQM1885C2A1R0CB01D
±0.1pF(B)
GQM1875C2E1R1BB12D
GQM1885C2A1R1BB01D
±0.25pF(C)
GQM1875C2E1R1CB12D
GQM1885C2A1R1CB01D
±0.1pF(B)
GQM1875C2E1R2BB12D
GQM1885C2A1R2BB01D
±0.25pF(C)
GQM1875C2E1R2CB12D
GQM1885C2A1R2CB01D
±0.1pF(B)
GQM1875C2E1R3BB12D
GQM1885C2A1R3BB01D
±0.25pF(C)
GQM1875C2E1R3CB12D
GQM1885C2A1R3CB01D
±0.1pF(B)
GQM1875C2E1R5BB12D
GQM1885C2A1R5BB01D
±0.25pF(C)
GQM1875C2E1R5CB12D
GQM1885C2A1R5CB01D
±0.1pF(B)
GQM1875C2E1R6BB12D
GQM1885C2A1R6BB01D
±0.25pF(C)
GQM1875C2E1R6CB12D
GQM1885C2A1R6CB01D
±0.1pF(B)
GQM1875C2E1R8BB12D
GQM1885C2A1R8BB01D
±0.25pF(C)
GQM1875C2E1R8CB12D
GQM1885C2A1R8CB01D
±0.1pF(B)
GQM1875C2E2R0BB12D
GQM1885C2A2R0BB01D
±0.25pF(C)
GQM1875C2E2R0CB12D
GQM1885C2A2R0CB01D
±0.1pF(B)
GQM1875C2E2R2BB12D
GQM1885C2A2R2BB01D
±0.25pF(C)
GQM1875C2E2R2CB12D
GQM1885C2A2R2CB01D
±0.1pF(B)
GQM1875C2E2R4BB12D
GQM1885C2A2R4BB01D
±0.25pF(C)
GQM1875C2E2R4CB12D
GQM1885C2A2R4CB01D
±0.1pF(B)
GQM1875C2E2R7BB12D
GQM1885C2A2R7BB01D
±0.25pF(C)
GQM1875C2E2R7CB12D
GQM1885C2A2R7CB01D
±0.1pF(B)
GQM1875C2E3R0BB12D
GQM1885C2A3R0BB01D
±0.25pF(C)
GQM1875C2E3R0CB12D
GQM1885C2A3R0CB01D
±0.1pF(B)
GQM1875C2E3R3BB12D
GQM1885C2A3R3BB01D
±0.25pF(C)
GQM1875C2E3R3CB12D
GQM1885C2A3R3CB01D
±0.1pF(B)
GQM1875C2E3R6BB12D
GQM1885C2A3R6BB01D
±0.25pF(C)
GQM1875C2E3R6CB12D
GQM1885C2A3R6CB01D
±0.1pF(B)
GQM1875C2E3R9BB12D
GQM1885C2A3R9BB01D
±0.25pF(C)
GQM1875C2E3R9CB12D
GQM1885C2A3R9CB01D
±0.1pF(B)
GQM1875C2E4R0BB12D
GQM1885C2A4R0BB01D
±0.25pF(C)
GQM1875C2E4R0CB12D
GQM1885C2A4R0CB01D
±0.1pF(B)
GQM1875C2E4R3BB12D
GQM1885C2A4R3BB01D
±0.25pF(C)
GQM1875C2E4R3CB12D
GQM1885C2A4R3CB01D
±0.1pF(B)
GQM1875C2E4R7BB12D
GQM1885C2A4R7BB01D
±0.25pF(C)
GQM1875C2E4R7CB12D
GQM1885C2A4R7CB01D
±0.1pF(B)
GQM1875C2E5R0BB12D
GQM1885C2A5R0BB01D
±0.25pF(C)
GQM1875C2E5R0CB12D
GQM1885C2A5R0CB01D
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
qProduct ID
wSeries
tTemperature Characteristics
u i o !0 iCapacitance Tolerance
q w e r t y
Packaging Code in Part Number is a code shows STD 180mm Reel Taping.
(Part Number) GQ M
18
7
5C 2E
R10
B
5
B12 D
eDimension (LxW)
yRated Voltage
oIndividual Specification Code
rDimension (T)
uCapacitance
!0Packaging
99
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Compensating Type C0G(5C) Characteristics
1.6x0.8(18)<0603>
LxW [mm]
250(2E)
Rated Volt. [Vdc]
Capacitance
50(1H)
Part Number
±0.25pF(C)
GQM1875C2E5R1CB12D
GQM1885C2A5R1CB01D
±0.5pF(D)
GQM1875C2E5R1DB12D
GQM1885C2A5R1DB01D
±0.25pF(C)
GQM1875C2E5R6CB12D
GQM1885C2A5R6CB01D
±0.5pF(D)
GQM1875C2E5R6DB12D
GQM1885C2A5R6DB01D
6.0pF(6R0)
±0.25pF(C)
GQM1875C2E6R0CB12D
GQM1885C2A6R0CB01D
±0.5pF(D)
GQM1875C2E6R0DB12D
GQM1885C2A6R0DB01D
6.2pF(6R2)
±0.25pF(C)
GQM1875C2E6R2CB12D
GQM1885C2A6R2CB01D
±0.5pF(D)
GQM1875C2E6R2DB12D
GQM1885C2A6R2DB01D
±0.25pF(C)
GQM1875C2E6R8CB12D
GQM1885C2A6R8CB01D
±0.5pF(D)
GQM1875C2E6R8DB12D
GQM1885C2A6R8DB01D
±0.25pF(C)
GQM1875C2E7R0CB12D
GQM1885C1H7R0CB01D
±0.5pF(D)
GQM1875C2E7R0DB12D
GQM1885C1H7R0DB01D
±0.25pF(C)
GQM1875C2E7R5CB12D
GQM1885C1H7R5CB01D
±0.5pF(D)
GQM1875C2E7R5DB12D
GQM1885C1H7R5DB01D
±0.25pF(C)
GQM1875C2E8R0CB12D
GQM1885C1H8R0CB01D
±0.5pF(D)
GQM1875C2E8R0DB12D
GQM1885C1H8R0DB01D
±0.25pF(C)
GQM1875C2E8R2CB12D
GQM1885C1H8R2CB01D
±0.5pF(D)
GQM1875C2E8R2DB12D
GQM1885C1H8R2DB01D
±0.25pF(C)
GQM1875C2E9R0CB12D
GQM1885C1H9R0CB01D
±0.5pF(D)
GQM1875C2E9R0DB12D
GQM1885C1H9R0DB01D
±0.25pF(C)
GQM1875C2E9R1CB12D
GQM1885C1H9R1CB01D
±0.5pF(D)
GQM1875C2E9R1DB12D
GQM1885C1H9R1DB01D
±2%(G)
GQM1875C2E100GB12D
GQM1885C1H100GB01D
±5%(J)
GQM1875C2E100JB12D
GQM1885C1H100JB01D
±2%(G)
GQM1875C2E110GB12D
GQM1885C1H110GB01D
±5%(J)
GQM1875C2E110JB12D
GQM1885C1H110JB01D
±2%(G)
GQM1875C2E120GB12D
GQM1885C1H120GB01D
±5%(J)
GQM1875C2E120JB12D
GQM1885C1H120JB01D
13pF(130)
±2%(G)
GQM1875C2E130GB12D
GQM1885C1H130GB01D
±5%(J)
GQM1875C2E130JB12D
GQM1885C1H130JB01D
15pF(150)
±2%(G)
GQM1875C2E150GB12D
GQM1885C1H150GB01D
±5%(J)
GQM1875C2E150JB12D
GQM1885C1H150JB01D
±2%(G)
GQM1875C2E160GB12D
GQM1885C1H160GB01D
±5%(J)
GQM1875C2E160JB12D
GQM1885C1H160JB01D
18pF(180)
±2%(G)
GQM1875C2E180GB12D
GQM1885C1H180GB01D
±5%(J)
GQM1875C2E180JB12D
GQM1885C1H180JB01D
20pF(200)
±2%(G)
GQM1875C2E200GB12D
GQM1885C1H200GB01D
±5%(J)
GQM1875C2E200JB12D
GQM1885C1H200JB01D
22pF(220)
±2%(G)
GQM1875C2E220GB12D
GQM1885C1H220GB01D
±5%(J)
GQM1875C2E220JB12D
GQM1885C1H220JB01D
24pF(240)
±2%(G)
GQM1875C2E240GB12D
GQM1885C1H240GB01D
±5%(J)
GQM1875C2E240JB12D
GQM1885C1H240JB01D
±2%(G)
GQM1875C2E270GB12D
GQM1885C1H270GB01D
±5%(J)
GQM1875C2E270JB12D
GQM1885C1H270JB01D
±2%(G)
GQM1875C2E300GB12D
GQM1885C1H300GB01D
±5%(J)
GQM1875C2E300JB12D
GQM1885C1H300JB01D
5.1pF(5R1)
5.6pF(5R6)
5
100(2A)
Tolerance
6.8pF(6R8)
7.0pF(7R0)
7.5pF(7R5)
8.0pF(8R0)
8.2pF(8R2)
9.0pF(9R0)
9.1pF(9R1)
10pF(100)
11pF(110)
12pF(120)
16pF(160)
27pF(270)
30pF(300)
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
qProduct ID
wSeries
tTemperature Characteristics
u i o !0 iCapacitance Tolerance
q w e r t y
Packaging Code in Part Number is a code shows STD 180mm Reel Taping.
(Part Number) GQ M
100
18
7
5C 2E
5R1
C
B12 D
eDimension (LxW)
yRated Voltage
oIndividual Specification Code
rDimension (T)
uCapacitance
!0Packaging
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Compensating Type C0G(5C) Characteristics
1.6x0.8(18)<0603>
LxW [mm]
250(2E)
Rated Volt. [Vdc]
Capacitance
Tolerance
50(1H)
Part Number
±2%(G)
GQM1875C2E330GB12D
±5%(J)
GQM1875C2E330JB12D
GQM1885C1H330JB01D
36pF(360)
±2%(G)
GQM1875C2E360GB12D
GQM1885C1H360GB01D
±5%(J)
GQM1875C2E360JB12D
GQM1885C1H360JB01D
39pF(390)
±2%(G)
GQM1875C2E390GB12D
GQM1885C1H390GB01D
±5%(J)
GQM1875C2E390JB12D
GQM1885C1H390JB01D
43pF(430)
±2%(G)
GQM1875C2E430GB12D
GQM1885C1H430GB01D
±5%(J)
GQM1875C2E430JB12D
GQM1885C1H430JB01D
±2%(G)
GQM1875C2E470GB12D
GQM1885C1H470GB01D
±5%(J)
GQM1875C2E470JB12D
GQM1885C1H470JB01D
33pF(330)
47pF(470)
51pF(510)
±2%(G)
GQM1885C1H330GB01D
GQM1885C1H510GB01D
±5%(J)
GQM1885C1H510JB01D
56pF(560)
±2%(G)
GQM1885C1H560GB01D
±5%(J)
GQM1885C1H560JB01D
62pF(620)
±2%(G)
GQM1885C1H620GB01D
±5%(J)
GQM1885C1H620JB01D
±2%(G)
GQM1885C1H680GB01D
68pF(680)
±5%(J)
GQM1885C1H680JB01D
75pF(750)
±2%(G)
GQM1885C1H750GB01D
±5%(J)
GQM1885C1H750JB01D
82pF(820)
±2%(G)
GQM1885C1H820GB01D
±5%(J)
GQM1885C1H820JB01D
91pF(910)
±2%(G)
GQM1885C1H910GB01D
±5%(J)
GQM1885C1H910JB01D
100pF(101)
±2%(G)
GQM1885C1H101GB01D
±5%(J)
GQM1885C1H101JB01D
The part number code is shown in ( ) and Unit is shown in [ ].
5
< >: EIA [inch] Code
101
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Compensating Type C0G(5C) Characteristics
2.0x1.25(21)<0805>
LxW [mm]
250(2E)
Rated Volt. [Vdc]
Capacitance
0.50pF(R50)
0.75pF(R75)
1.0pF(1R0)
1.1pF(1R1)
5
1.2pF(1R2)
1.3pF(1R3)
1.5pF(1R5)
1.6pF(1R6)
1.8pF(1R8)
2.0pF(2R0)
2.2pF(2R2)
2.4pF(2R4)
2.7pF(2R7)
3.0pF(3R0)
3.3pF(3R3)
3.6pF(3R6)
3.9pF(3R9)
4.0pF(4R0)
4.3pF(4R3)
4.7pF(4R7)
5.0pF(5R0)
5.1pF(5R1)
5.6pF(5R6)
6.0pF(6R0)
Tolerance
100(2A)
Part Number
±0.1pF(B)
GQM2195C2ER50BB12D
GQM2195C2AR50BB01D
±0.25pF(C)
GQM2195C2ER50CB12D
GQM2195C2AR50CB01D
±0.1pF(B)
GQM2195C2ER75BB12D
GQM2195C2AR75BB01D
±0.25pF(C)
GQM2195C2ER75CB12D
GQM2195C2AR75CB01D
±0.1pF(B)
GQM2195C2E1R0BB12D
GQM2195C2A1R0BB01D
±0.25pF(C)
GQM2195C2E1R0CB12D
GQM2195C2A1R0CB01D
±0.1pF(B)
GQM2195C2E1R1BB12D
GQM2195C2A1R1BB01D
±0.25pF(C)
GQM2195C2E1R1CB12D
GQM2195C2A1R1CB01D
±0.1pF(B)
GQM2195C2E1R2BB12D
GQM2195C2A1R2BB01D
±0.25pF(C)
GQM2195C2E1R2CB12D
GQM2195C2A1R2CB01D
±0.1pF(B)
GQM2195C2E1R3BB12D
GQM2195C2A1R3BB01D
±0.25pF(C)
GQM2195C2E1R3CB12D
GQM2195C2A1R3CB01D
±0.1pF(B)
GQM2195C2E1R5BB12D
GQM2195C2A1R5BB01D
±0.25pF(C)
GQM2195C2E1R5CB12D
GQM2195C2A1R5CB01D
±0.1pF(B)
GQM2195C2E1R6BB12D
GQM2195C2A1R6BB01D
±0.25pF(C)
GQM2195C2E1R6CB12D
GQM2195C2A1R6CB01D
±0.1pF(B)
GQM2195C2E1R8BB12D
GQM2195C2A1R8BB01D
±0.25pF(C)
GQM2195C2E1R8CB12D
GQM2195C2A1R8CB01D
±0.1pF(B)
GQM2195C2E2R0BB12D
GQM2195C2A2R0BB01D
±0.25pF(C)
GQM2195C2E2R0CB12D
GQM2195C2A2R0CB01D
±0.1pF(B)
GQM2195C2E2R2BB12D
GQM2195C2A2R2BB01D
±0.25pF(C)
GQM2195C2E2R2CB12D
GQM2195C2A2R2CB01D
±0.1pF(B)
GQM2195C2E2R4BB12D
GQM2195C2A2R4BB01D
±0.25pF(C)
GQM2195C2E2R4CB12D
GQM2195C2A2R4CB01D
±0.1pF(B)
GQM2195C2E2R7BB12D
GQM2195C2A2R7BB01D
±0.25pF(C)
GQM2195C2E2R7CB12D
GQM2195C2A2R7CB01D
±0.1pF(B)
GQM2195C2E3R0BB12D
GQM2195C2A3R0BB01D
±0.25pF(C)
GQM2195C2E3R0CB12D
GQM2195C2A3R0CB01D
±0.1pF(B)
GQM2195C2E3R3BB12D
GQM2195C2A3R3BB01D
±0.25pF(C)
GQM2195C2E3R3CB12D
GQM2195C2A3R3CB01D
±0.1pF(B)
GQM2195C2E3R6BB12D
GQM2195C2A3R6BB01D
±0.25pF(C)
GQM2195C2E3R6CB12D
GQM2195C2A3R6CB01D
±0.1pF(B)
GQM2195C2E3R9BB12D
GQM2195C2A3R9BB01D
±0.25pF(C)
GQM2195C2E3R9CB12D
GQM2195C2A3R9CB01D
±0.1pF(B)
GQM2195C2E4R0BB12D
GQM2195C2A4R0BB01D
±0.25pF(C)
GQM2195C2E4R0CB12D
GQM2195C2A4R0CB01D
±0.1pF(B)
GQM2195C2E4R3BB12D
GQM2195C2A4R3BB01D
±0.25pF(C)
GQM2195C2E4R3CB12D
GQM2195C2A4R3CB01D
±0.1pF(B)
GQM2195C2E4R7BB12D
GQM2195C2A4R7BB01D
±0.25pF(C)
GQM2195C2E4R7CB12D
GQM2195C2A4R7CB01D
±0.1pF(B)
GQM2195C2E5R0BB12D
GQM2195C2A5R0BB01D
±0.25pF(C)
GQM2195C2E5R0CB12D
GQM2195C2A5R0CB01D
±0.25pF(C)
GQM2195C2E5R1CB12D
GQM2195C2A5R1CB01D
±0.5pF(D)
GQM2195C2E5R1DB12D
GQM2195C2A5R1DB01D
±0.25pF(C)
GQM2195C2E5R6CB12D
GQM2195C2A5R6CB01D
±0.5pF(D)
GQM2195C2E5R6DB12D
GQM2195C2A5R6DB01D
±0.25pF(C)
GQM2195C2E6R0CB12D
GQM2195C2A6R0CB01D
±0.5pF(D)
GQM2195C2E6R0DB12D
GQM2195C2A6R0DB01D
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
qProduct ID
wSeries
tTemperature Characteristics
u i o !0 iCapacitance Tolerance
q w e r t y
Packaging Code in Part Number is a code shows STD 180mm Reel Taping.
(Part Number) GQ M
102
21
9
5C 2E
R50
B
B12 D
eDimension (LxW)
yRated Voltage
oIndividual Specification Code
rDimension (T)
uCapacitance
!0Packaging
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Compensating Type C0G(5C) Characteristics
2.0x1.25(21)<0805>
LxW [mm]
250(2E)
Rated Volt. [Vdc]
Capacitance
100(2A)
Tolerance
50(1H)
Part Number
±0.25pF(C)
GQM2195C2E6R2CB12D
GQM2195C2A6R2CB01D
±0.5pF(D)
GQM2195C2E6R2DB12D
GQM2195C2A6R2DB01D
±0.25pF(C)
GQM2195C2E6R8CB12D
GQM2195C2A6R8CB01D
±0.5pF(D)
GQM2195C2E6R8DB12D
GQM2195C2A6R8DB01D
7.0pF(7R0)
±0.25pF(C)
GQM2195C2E7R0CB12D
GQM2195C2A7R0CB01D
±0.5pF(D)
GQM2195C2E7R0DB12D
GQM2195C2A7R0DB01D
7.5pF(7R5)
±0.25pF(C)
GQM2195C2E7R5CB12D
GQM2195C2A7R5CB01D
±0.5pF(D)
GQM2195C2E7R5DB12D
GQM2195C2A7R5DB01D
±0.25pF(C)
GQM2195C2E8R0CB12D
GQM2195C2A8R0CB01D
±0.5pF(D)
GQM2195C2E8R0DB12D
GQM2195C2A8R0DB01D
±0.25pF(C)
GQM2195C2E8R2CB12D
GQM2195C2A8R2CB01D
±0.5pF(D)
GQM2195C2E8R2DB12D
GQM2195C2A8R2DB01D
±0.25pF(C)
GQM2195C2E9R0CB12D
GQM2195C2A9R0CB01D
±0.5pF(D)
GQM2195C2E9R0DB12D
GQM2195C2A9R0DB01D
±0.25pF(C)
GQM2195C2E9R1CB12D
GQM2195C2A9R1CB01D
±0.5pF(D)
GQM2195C2E9R1DB12D
GQM2195C2A9R1DB01D
±2%(G)
GQM2195C2E100GB12D
GQM2195C2A100GB01D
±5%(J)
GQM2195C2E100JB12D
GQM2195C2A100JB01D
11pF(110)
±2%(G)
GQM2195C2E110GB12D
GQM2195C2A110GB01D
±5%(J)
GQM2195C2E110JB12D
GQM2195C2A110JB01D
12pF(120)
±2%(G)
GQM2195C2E120GB12D
GQM2195C2A120GB01D
±5%(J)
GQM2195C2E120JB12D
GQM2195C2A120JB01D
13pF(130)
±2%(G)
GQM2195C2E130GB12D
GQM2195C2A130GB01D
±5%(J)
GQM2195C2E130JB12D
GQM2195C2A130JB01D
15pF(150)
±2%(G)
GQM2195C2E150GB12D
GQM2195C2A150GB01D
±5%(J)
GQM2195C2E150JB12D
GQM2195C2A150JB01D
±2%(G)
GQM2195C2E160GB12D
GQM2195C2A160GB01D
±5%(J)
GQM2195C2E160JB12D
GQM2195C2A160JB01D
18pF(180)
±2%(G)
GQM2195C2E180GB12D
GQM2195C2A180GB01D
±5%(J)
GQM2195C2E180JB12D
GQM2195C2A180JB01D
20pF(200)
±2%(G)
GQM2195C2E200GB12D
GQM2195C1H200JB01D
GQM2195C1H220GB01D
6.2pF(6R2)
6.8pF(6R8)
8.0pF(8R0)
8.2pF(8R2)
9.0pF(9R0)
9.1pF(9R1)
10pF(100)
16pF(160)
5
GQM2195C1H200GB01D
±5%(J)
GQM2195C2E200JB12D
22pF(220)
±2%(G)
GQM2195C2E220GB12D
±5%(J)
GQM2195C2E220JB12D
GQM2195C1H220JB01D
24pF(240)
±2%(G)
GQM2195C2E240GB12D
GQM2195C1H240GB01D
±5%(J)
GQM2195C2E240JB12D
GQM2195C1H240JB01D
27pF(270)
±2%(G)
GQM2195C2E270GB12D
GQM2195C1H270GB01D
±5%(J)
GQM2195C2E270JB12D
GQM2195C1H270JB01D
30pF(300)
±2%(G)
GQM2195C2E300GB12D
GQM2195C1H300GB01D
±5%(J)
GQM2195C2E300JB12D
GQM2195C1H300JB01D
33pF(330)
±2%(G)
GQM2195C2E330GB12D
GQM2195C1H330GB01D
±5%(J)
GQM2195C2E330JB12D
GQM2195C1H330JB01D
±2%(G)
GQM2195C2E360GB12D
GQM2195C1H360GB01D
±5%(J)
GQM2195C2E360JB12D
GQM2195C1H360JB01D
±2%(G)
GQM2195C2E390GB12D
GQM2195C1H390GB01D
±5%(J)
GQM2195C2E390JB12D
GQM2195C1H390JB01D
36pF(360)
39pF(390)
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
103
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Compensating Type C0G(5C) Characteristics
2.0x1.25(21)<0805>
LxW [mm]
250(2E)
Rated Volt. [Vdc]
Capacitance
50(1H)
Part Number
±2%(G)
GQM2195C2E430GB12D
±5%(J)
GQM2195C2E430JB12D
GQM2195C1H430JB01D
47pF(470)
±2%(G)
GQM2195C2E470GB12D
GQM2195C1H470GB01D
±5%(J)
GQM2195C2E470JB12D
GQM2195C1H470JB01D
51pF(510)
±2%(G)
GQM2195C2E510GB12D
GQM2195C1H510GB01D
±5%(J)
GQM2195C2E510JB12D
GQM2195C1H510JB01D
56pF(560)
±2%(G)
GQM2195C2E560GB12D
GQM2195C1H560GB01D
±5%(J)
GQM2195C2E560JB12D
GQM2195C1H560JB01D
62pF(620)
±2%(G)
GQM2195C2E620GB12D
GQM2195C1H620GB01D
±5%(J)
GQM2195C2E620JB12D
GQM2195C1H620JB01D
±2%(G)
GQM2195C2E680GB12D
GQM2195C1H680GB01D
±5%(J)
GQM2195C2E680JB12D
GQM2195C1H680JB01D
75pF(750)
±2%(G)
GQM2195C2E750GB12D
GQM2195C1H750GB01D
±5%(J)
GQM2195C2E750JB12D
GQM2195C1H750JB01D
82pF(820)
±2%(G)
GQM2195C2E820GB12D
GQM2195C1H820GB01D
±5%(J)
GQM2195C2E820JB12D
GQM2195C1H820JB01D
±2%(G)
GQM2195C2E910GB12D
GQM2195C1H910GB01D
±5%(J)
GQM2195C2E910JB12D
GQM2195C1H910JB01D
±2%(G)
GQM2195C2E101GB12D
GQM2195C1H101GB01D
±5%(J)
GQM2195C2E101JB12D
GQM2195C1H101JB01D
43pF(430)
5
Tolerance
68pF(680)
91pF(910)
100pF(101)
The part number code is shown in ( ) and Unit is shown in [ ].
GQM2195C1H430GB01D
< >: EIA [inch] Code
qProduct ID
wSeries
tTemperature Characteristics
u i o !0 iCapacitance Tolerance
q w e r t y
Packaging Code in Part Number is a code shows STD 180mm Reel Taping.
(Part Number) GQ M
104
21
9
5C 2E
430
G
B12 D
eDimension (LxW)
yRated Voltage
oIndividual Specification Code
rDimension (T)
uCapacitance
!0Packaging
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GQM Series Specifications and TestGQM
Methods
(1)Specifications and Test Methods
Series
1
Specifications
Item
No.
Operating
Temperature
Test Method
Y55 to 125D
Reference Temperature: 25D
The rated voltage is defined as the maximum voltage which
may be applied continuously to the capacitor.
When AC voltage is superimposed on DC voltage, VP-P or VO-P,
whichever is larger, should be maintained within the rated
voltage range.
2
Rated Voltage
See the previous page.
3
Appearance
No defects or abnormalities
Visual inspection
4
Dimension
Within the specified dimensions
Using calipers
No defects or abnormalities
No failure should be observed when 300%∗ of the rated voltage
is applied between the terminations for 1 to 5 seconds,
provided the charge/discharge current is less than 50mA.
∗250V only 250%
5
Dielectric Strength
6
Insulation Resistance More than 10,000MΩ
7
Capacitance
8
Q
The insulation resistance should be measured with a DC
voltage not exceeding the rated voltage at 25D and 75%RH
max. and within 2 minutes of charging.
Within the specified tolerance
The capacitance/Q should be measured at 25D at the
frequency and voltage shown in the table.
30pF min.: QU1400
30pF max.: QU800W20C
Capacitance
Change
Within the specified tolerance (Table A)
Temperature
Coefficient
Within the specified tolerance (Table A)
Capacitance
Drift
Within T0.2% or T0.05pF
(Whichever is larger)
The temperature coefficient is determined using the capacitance
measured in step 3 as a reference.
When cycling the temperature sequentially from step 1 through 5
the capacitance should be within the specified tolerance for the
temperature coefficient and capacitance change as in Table A.
The capacitance drift is calculated by dividing the differences
between the maximum and minimum measured values in the
steps 1, 3 and 5 by the capacitance value in step 3.
Capacitance
Temperature
Characteristics
Step
1
No removal of the terminations or other defect should occur.
c
a
Adhesive Strength
of Termination
b
10
Solder resist
Baked electrode or
copper foil
11
Appearance
No defects or abnormalities
Capacitance
Within the specified tolerance
Vibration
Resistance
Q
30pF min.: QU1400
30pF max.: QU800W20C
C: Nominal Capacitance (pF)
0.5 to 5Vrms
Voltage
C: Nominal Capacitance (pF)
9
1T0.1MHz
Frequency
Temperature (D)
Reference Temp. T2
2
Y55T3
3
Reference Temp. T2
4
125T3
5
Reference Temp. T2
Solder the capacitor to the test jig (glass epoxy board) shown in
Fig. 1 using a eutectic solder. Then apply 10N* force in parallel
with the test jig for 10T1 sec.
The soldering should be done either with an iron or using the
reflow method and should be conducted with care so that the
soldering is uniform and free of defects such as heat shock.
*5N (GQM188)
Type
GQM18
GQM21
a
1.0
1.2
b
3.0
4.0
c
1.2
1.65
(in mm)
Fig. 1
Solder the capacitor to the test jig (glass epoxy board) in the
same manner and under the same conditions as (10).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should
be traversed in approximately 1 minute.
This motion should be applied for a period of 2 hours in each of
3 mutually perpendicular directions (total of 6 hours).
Continued on the following page.
105
5
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GQM Series Specifications and Test Methods (1)
Continued from the preceding page.
Specifications
Item
Appearance
No marking defects
Capacitance
Change
Within T5% or T0.5pF
(Whichever is larger)
φ4.5
VWZ[§¨«¬©X¥T°±­_`\¦U®ª«]YZSTW¤¥¨¢Q,£§RV^¯
[¬
Y]^ª®¯Z«
b
Test Method
c
12
Solder the capacitor on the test jig (glass epoxy board) shown
in Fig. 2 using a eutectic solder.
Then apply a force in the direction shown in Fig. 3.
The soldering should be done by the reflow method and should
be conducted with care so that the soldering is uniform and free
of defects such as heat shock.
40
No.
20
a
Deflection
100
50 Pressurizing
speed : 1.0mm/sec.
Pressurize
R230
t: 1.6mm
5
Type
GQM18
GQM21
a
1.0
1.2
b
3.0
4.0
Flexure : V1
c
1.2
1.65
Capacitance meter
45
45
(in mm)
Fig. 2
13
Solderability of
Termination
75% of the terminations are to be soldered evenly
and continuously.
Fig. 3
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion). Preheat at
80 to 120D for 10 to 30 seconds. After preheating, immerse in
eutectic solder solution for 2T0.5 seconds at 230T5D or
Sn-3.0Ag-0.5Cu solder solution for 2T0.5 seconds at 245T5°C.
The measured and observed characteristics should satisfy the
specifications in the following table.
Resistance
14 to Soldering
Heat
Appearance
No marking defects
Capacitance
Change
Within T2.5% or T0.25 pF
(Whichever is larger)
Q
30pF min.: QU1400
30pF max.: QU800W20C
Preheat the capacitor at 120 to 150D for 1 minute. Immerse the
capacitor in a eutectic solder or Sn-3.0Ag-0.5Cu solder solution
at 270T5D for 10T0.5 seconds. Let sit at room temperature for
24T2 hours.
C: Nominal Capacitance (pF)
I.R.
More than 10,000MΩ
Dielectric
Strength
No failure
The measured and observed characteristics should satisfy the
specifications in the following table.
15
Appearance
No marking defects
Capacitance
Change
Within T2.5% or T0.25pF
(Whichever is larger)
Temperature
Cycle
30pF min.: QU1400
30pF max.: QU800W20C
Fix the capacitor to the supporting jig in the same manner and
under the same conditions as (10).
Perform the five cycles according to the four heat treatments
listed in the following table.
Let sit for 24T2 hours at room temperature, then measure.
C: Nominal Capacitance (pF)
1
2
3
4
Min. Operating Room Max. Operating Room
Temp. (D)
Temp. W0/Y3 Temp. Temp. W3/Y0 Temp.
I.R.
More than 10,000MΩ
Time (min.)
Dielectric
Strength
No failure
Q
Step
30T3
2 to 3
30T3
2 to 3
The measured and observed characteristics should satisfy the
specifications in the following table.
16
Humidity
Steady
State
Appearance
No marking defects
Capacitance
Change
Within T5% or T0.5pF
(Whichever is larger)
Q
30pF min.: QU350
10pF and over, 30pF and below: QU275+5C/2
10pF max.: QU200W10C
Let the capacitor sit at 40T2D and 90 to 95% humidity for
500T12 hours.
Remove and let sit for 24T2 hours (temperature compensating
type) at room temperature, then measure.
C: Nominal Capacitance (pF)
I.R.
More than 1,000MΩ
Continued on the following page.
106
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GQM Series Specifications and TestGQM
Methods
(1)Specifications and Test Methods
Series
Continued from the preceding page.
No.
Specifications
Item
Test Method
The measured and observed characteristics should satisfy the
specifications in the following table.
17
Humidity
Load
Appearance
No marking defects
Capacitance
Change
Within T7.5% or T0.75pF
(Whichever is larger)
Q
Apply the rated voltage at 40T2D and 90 to 95% humidity for
500T12 hours. Remove and let sit for 24T2 hours at room
temperature then measure. The charge/discharge current is
less than 50mA.
30pF min.: QU200
30pF max.: QU100W10C/3
C: Nominal Capacitance (pF)
I.R.
More than 500MΩ
5
The measured and observed characteristics should satisfy the
specifications in the following table.
18
High
Temperature
Load
Appearance
No marking defects
Capacitance
Change
Within T3% or T0.3pF
(Whichever is larger)
Q
30pF min.: QU350
10pF and over, 30pF and below: QU275W5C/2
10pF max.: QU200W10C
I.R.
More than 1,000MΩ
Apply 200% of the rated voltage for 1000T12 hours at the
maximum operating temperature T3D.
Let sit for 24T2 hours (temperature compensating type) at
room temperature, then measure.
The charge/discharge current is less than 50mA.
C: Nominal Capacitance (pF)
Table A
Capacitance Change from 25D (%)
Char.
Nominal Values
(ppm/D) *1
Y30D
Y55D
Max.
Min.
0T30
Y0.24
0.58
5C
*1: Nominal values denote the temperature coefficient within a range of 25 to 125D.
Max.
0.40
Y10D
Min.
Y0.17
Max.
0.25
Min.
Y0.11
107
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GQM Series Data
■ Q - Frequency Characteristics
■ Resonant Frequency - Capacitance
GQM18
10000
6.8pF
2.4pF
Resonant Frequency (GHz)
100
1pF
Q
1000
100
10
GQM21
1
GQM18
10
0
0.1
5
1
100M
1G
Frequency (Hz)
108
10G
1
10
Capacitance (pF)
100
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Monolithic Ceramic Capacitors
High Frequency Type ERB Series
e
g
e
1. Negligible inductance is achieved by its monolithic
structure so the series can be used at frequencies
above 1GHz.
2. Nickel barriered terminations of ERB series improve
solderability and decrease solder leaching.
3. ERB18/21 series are designed for both flow and
reflow soldering and ERB32 series are designed for
reflow soldering.
■ Applications
T
■ Features (ERB Series)
L
W
Dimensions (mm)
Part Number
L
W
T max.
e min.
ERB188
1.6±0.1
0.8±0.1
0.9
0.2
g min.
0.5
ERB21B
2.0±0.3
1.25±0.3
1.35
0.25
0.7
ERB32Q
3.2±0.3
2.5±0.3
1.7
0.3
1.0
High frequency and high-power circuits
109
6
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
Temperature Compensating Type C0G(5C) Characteristics
8
ex.8: T Dimension [mm]
C0G(5C)
TC
LxW 1.6x0.8
(18)
[mm] <0603>
2.0x1.25
(21)
<0805>
Rated Voltage 250 250 100 50 500 300 250 100 50
[Vdc] (2E) (2E) (2A) (1H) (2H) (YD) (2E) (2A) (1H)
Capacitance
6
LxW 1.6x0.8
(18)
[mm] <0603>
2.0x1.25
(21)
<0805>
3.2x2.5
(32)
<1210>
Rated Voltage 250 250 100 50 500 300 250 100 50
[Vdc] (2E) (2E) (2A) (1H) (2H) (YD) (2E) (2A) (1H)
Capacitance
0.50pF(R50)
8
B
47pF(470)
8
B
Q
0.75pF(R75)
8
B
51pF(510)
8
B
Q
1.0pF(1R0)
8
B
56pF(560)
8
B
Q
1.1pF(1R1)
8
B
62pF(620)
8
B
Q
1.2pF(1R2)
8
B
68pF(680)
8
B
Q
1.3pF(1R3)
8
B
75pF(750)
8
B
Q
1.5pF(1R5)
8
B
82pF(820)
8
B
Q
1.6pF(1R6)
8
B
91pF(910)
8
B
Q
1.8pF(1R8)
8
B
100pF(101)
8
B
2.0pF(2R0)
8
B
110pF(111)
B
Q
2.2pF(2R2)
8
B
120pF(121)
B
Q
2.4pF(2R4)
8
B
130pF(131)
B
2.7pF(2R7)
8
B
150pF(151)
B
3.0pF(3R0)
8
B
160pF(161)
B
3.3pF(3R3)
8
B
Q
180pF(181)
Q
3.6pF(3R6)
8
B
Q
200pF(201)
Q
3.9pF(3R9)
8
B
Q
220pF(221)
Q
4.0pF(4R0)
8
B
Q
240pF(241)
Q
4.3pF(4R3)
8
B
Q
270pF(271)
Q
4.7pF(4R7)
8
B
Q
300pF(301)
Q
5.0pF(5R0)
8
B
Q
330pF(331)
Q
Q
Q
Q
Q
5.1pF(5R1)
8
B
Q
360pF(361)
Q
5.6pF(5R6)
8
B
Q
390pF(391)
Q
6.0pF(6R0)
8
B
Q
430pF(431)
Q
6.2pF(6R2)
8
B
Q
470pF(471)
Q
6.8pF(6R8)
8
B
Q
510pF(511)
Q
7.0pF(7R0)
8
B
Q
560pF(561)
Q
7.5pF(7R5)
8
B
Q
620pF(621)
Q
8.0pF(8R0)
8
B
Q
680pF(681)
Q
8.2pF(8R2)
8
B
Q
750pF(751)
Q
9.0pF(9R0)
8
B
Q
820pF(821)
Q
9.1pF(9R1)
8
B
Q
910pF(911)
Q
10pF(100)
8
B
Q
1000pF(102)
Q
11pF(110)
8
B
Q
12pF(120)
8
B
Q
13pF(130)
8
B
Q
15pF(150)
8
B
Q
16pF(160)
8
B
Q
18pF(180)
8
B
Q
20pF(200)
8
B
Q
22pF(220)
8
B
Q
24pF(240)
8
B
Q
27pF(270)
8
B
Q
30pF(300)
8
B
Q
33pF(330)
8
B
Q
36pF(360)
8
B
Q
39pF(390)
8
B
Q
43pF(430)
8
B
Q
The part number code is shown in ( ) and Unit is shown in [ ].
110
C0G(5C)
TC
3.2x2.5
(32)
<1210>
< >: EIA [inch] Code
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Compensating Type C0G(5C) Characteristics
LxW [mm]
1.6x0.8(18)<0603>
2.0x1.25(21)<0805>
250(2E)
250(2E)
Rated Volt. [Vdc]
Capacitance
Tolerance
0.50pF(R50)
0.75pF(R75)
1.0pF(1R0)
1.1pF(1R1)
1.2pF(1R2)
1.3pF(1R3)
1.5pF(1R5)
1.6pF(1R6)
1.8pF(1R8)
2.0pF(2R0)
2.2pF(2R2)
2.4pF(2R4)
2.7pF(2R7)
3.0pF(3R0)
3.3pF(3R3)
3.6pF(3R6)
3.9pF(3R9)
4.0pF(4R0)
4.3pF(4R3)
4.7pF(4R7)
5.0pF(5R0)
5.1pF(5R1)
5.6pF(5R6)
6.0pF(6R0)
Part Number
±0.1pF(B)
ERB1885C2ER50BDX1D
ERB21B5C2ER50BDX1L
±0.25pF(C)
ERB1885C2ER50CDX1D
ERB21B5C2ER50CDX1L
±0.1pF(B)
ERB1885C2ER75BDX1D
ERB21B5C2ER75BDX1L
±0.25pF(C)
ERB1885C2ER75CDX1D
ERB21B5C2ER75CDX1L
±0.1pF(B)
ERB1885C2E1R0BDX1D
ERB21B5C2E1R0BDX1L
±0.25pF(C)
ERB1885C2E1R0CDX1D
ERB21B5C2E1R0CDX1L
±0.1pF(B)
ERB1885C2E1R1BDX1D
ERB21B5C2E1R1BDX1L
±0.25pF(C)
ERB1885C2E1R1CDX1D
ERB21B5C2E1R1CDX1L
±0.1pF(B)
ERB1885C2E1R2BDX1D
ERB21B5C2E1R2BDX1L
±0.25pF(C)
ERB1885C2E1R2CDX1D
ERB21B5C2E1R2CDX1L
±0.1pF(B)
ERB1885C2E1R3BDX1D
ERB21B5C2E1R3BDX1L
±0.25pF(C)
ERB1885C2E1R3CDX1D
ERB21B5C2E1R3CDX1L
±0.1pF(B)
ERB1885C2E1R5BDX1D
ERB21B5C2E1R5BDX1L
±0.25pF(C)
ERB1885C2E1R5CDX1D
ERB21B5C2E1R5CDX1L
±0.1pF(B)
ERB1885C2E1R6BDX1D
ERB21B5C2E1R6BDX1L
±0.25pF(C)
ERB1885C2E1R6CDX1D
ERB21B5C2E1R6CDX1L
±0.1pF(B)
ERB1885C2E1R8BDX1D
ERB21B5C2E1R8BDX1L
±0.25pF(C)
ERB1885C2E1R8CDX1D
ERB21B5C2E1R8CDX1L
±0.1pF(B)
ERB1885C2E2R0BDX1D
ERB21B5C2E2R0BDX1L
±0.25pF(C)
ERB1885C2E2R0CDX1D
ERB21B5C2E2R0CDX1L
±0.1pF(B)
ERB1885C2E2R2BDX1D
ERB21B5C2E2R2BDX1L
±0.25pF(C)
ERB1885C2E2R2CDX1D
ERB21B5C2E2R2CDX1L
±0.1pF(B)
ERB1885C2E2R4BDX1D
ERB21B5C2E2R4BDX1L
±0.25pF(C)
ERB1885C2E2R4CDX1D
ERB21B5C2E2R4CDX1L
±0.1pF(B)
ERB1885C2E2R7BDX1D
ERB21B5C2E2R7BDX1L
±0.25pF(C)
ERB1885C2E2R7CDX1D
ERB21B5C2E2R7CDX1L
±0.1pF(B)
ERB1885C2E3R0BDX1D
ERB21B5C2E3R0BDX1L
±0.25pF(C)
ERB1885C2E3R0CDX1D
ERB21B5C2E3R0CDX1L
±0.1pF(B)
ERB1885C2E3R3BDX1D
ERB21B5C2E3R3BDX1L
±0.25pF(C)
ERB1885C2E3R3CDX1D
ERB21B5C2E3R3CDX1L
±0.1pF(B)
ERB1885C2E3R6BDX1D
ERB21B5C2E3R6BDX1L
±0.25pF(C)
ERB1885C2E3R6CDX1D
ERB21B5C2E3R6CDX1L
±0.1pF(B)
ERB1885C2E3R9BDX1D
ERB21B5C2E3R9BDX1L
±0.25pF(C)
ERB1885C2E3R9CDX1D
ERB21B5C2E3R9CDX1L
±0.1pF(B)
ERB1885C2E4R0BDX1D
ERB21B5C2E4R0BDX1L
±0.25pF(C)
ERB1885C2E4R0CDX1D
ERB21B5C2E4R0CDX1L
±0.1pF(B)
ERB1885C2E4R3BDX1D
ERB21B5C2E4R3BDX1L
±0.25pF(C)
ERB1885C2E4R3CDX1D
ERB21B5C2E4R3CDX1L
±0.1pF(B)
ERB1885C2E4R7BDX1D
ERB21B5C2E4R7BDX1L
±0.25pF(C)
ERB1885C2E4R7CDX1D
ERB21B5C2E4R7CDX1L
±0.1pF(B)
ERB1885C2E5R0BDX1D
ERB21B5C2E5R0BDX1L
±0.25pF(C)
ERB1885C2E5R0CDX1D
ERB21B5C2E5R0CDX1L
±0.1pF(B)
ERB1885C2E5R1BDX1D
ERB21B5C2E5R1BDX1L
±0.25pF(C)
ERB1885C2E5R1CDX1D
ERB21B5C2E5R1CDX1L
±0.5pF(D)
ERB1885C2E5R1DDX1D
ERB21B5C2E5R1DDX1L
±0.1pF(B)
ERB1885C2E5R6BDX1D
ERB21B5C2E5R6BDX1L
±0.25pF(C)
ERB1885C2E5R6CDX1D
ERB21B5C2E5R6CDX1L
±0.5pF(D)
ERB1885C2E5R6DDX1D
ERB21B5C2E5R6DDX1L
±0.1pF(B)
ERB1885C2E6R0BDX1D
ERB21B5C2E6R0BDX1L
±0.25pF(C)
ERB1885C2E6R0CDX1D
ERB21B5C2E6R0CDX1L
±0.5pF(D)
ERB1885C2E6R0DDX1D
ERB21B5C2E6R0DDX1L
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
qProduct ID
wSeries
tTemperature Characteristics
u i o !0 iCapacitance Tolerance
q w e r t y
Packaging Code in Part Number is a code shows STD 180mm Reel Taping.
(Part Number) ER
B
18
8
5C 2E
R50
B
6
DX1 D
eDimension (LxW)
yRated Voltage
oIndividual Specification Code
rDimension (T)
uCapacitance
!0Packaging
111
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Compensating Type C0G(5C) Characteristics
LxW [mm]
1.6x0.8(18)<0603>
2.0x1.25(21)<0805>
250(2E)
250(2E)
Rated Volt. [Vdc]
Capacitance
Tolerance
6.2pF(6R2)
6.8pF(6R8)
7.0pF(7R0)
Part Number
±0.1pF(B)
ERB1885C2E6R2BDX1D
ERB21B5C2E6R2BDX1L
±0.25pF(C)
ERB1885C2E6R2CDX1D
ERB21B5C2E6R2CDX1L
±0.5pF(D)
ERB1885C2E6R2DDX1D
ERB21B5C2E6R2DDX1L
±0.1pF(B)
ERB1885C2E6R8BDX1D
ERB21B5C2E6R8BDX1L
±0.25pF(C)
ERB1885C2E6R8CDX1D
ERB21B5C2E6R8CDX1L
±0.5pF(D)
ERB1885C2E6R8DDX1D
ERB21B5C2E6R8DDX1L
±0.1pF(B)
ERB1885C2E7R0BDX5D
ERB21B5C2E7R0BDX1L
±0.25pF(C)
ERB1885C2E7R0CDX5D
ERB21B5C2E7R0CDX1L
±0.5pF(D)
ERB1885C2E7R0DDX5D
ERB21B5C2E7R0DDX1L
±0.1pF(B)
ERB1885C2E7R5BDX5D
ERB21B5C2E7R5BDX1L
±0.25pF(C)
ERB1885C2E7R5CDX5D
ERB21B5C2E7R5CDX1L
±0.5pF(D)
ERB1885C2E7R5DDX5D
ERB21B5C2E7R5DDX1L
±0.1pF(B)
ERB1885C2E8R0BDX5D
ERB21B5C2E8R0BDX1L
±0.25pF(C)
ERB1885C2E8R0CDX5D
ERB21B5C2E8R0CDX1L
±0.5pF(D)
ERB1885C2E8R0DDX5D
ERB21B5C2E8R0DDX1L
±0.1pF(B)
ERB1885C2E8R2BDX5D
ERB21B5C2E8R2BDX1L
±0.25pF(C)
ERB1885C2E8R2CDX5D
ERB21B5C2E8R2CDX1L
±0.5pF(D)
ERB1885C2E8R2DDX5D
ERB21B5C2E8R2DDX1L
±0.1pF(B)
ERB1885C2E9R0BDX5D
ERB21B5C2E9R0BDX1L
±0.25pF(C)
ERB1885C2E9R0CDX5D
ERB21B5C2E9R0CDX1L
±0.5pF(D)
ERB1885C2E9R0DDX5D
ERB21B5C2E9R0DDX1L
±0.1pF(B)
ERB1885C2E9R1BDX5D
ERB21B5C2E9R1BDX1L
±0.25pF(C)
ERB1885C2E9R1CDX5D
ERB21B5C2E9R1CDX1L
±0.5pF(D)
ERB1885C2E9R1DDX5D
ERB21B5C2E9R1DDX1L
±2%(G)
ERB1885C2E100GDX5D
ERB21B5C2E100GDX1L
±5%(J)
ERB1885C2E100JDX5D
ERB21B5C2E100JDX1L
11pF(110)
±2%(G)
ERB1885C2E110GDX5D
ERB21B5C2E110GDX1L
±5%(J)
ERB1885C2E110JDX5D
ERB21B5C2E110JDX1L
12pF(120)
±2%(G)
ERB1885C2E120GDX5D
ERB21B5C2E120GDX1L
±5%(J)
ERB1885C2E120JDX5D
ERB21B5C2E120JDX1L
13pF(130)
±2%(G)
ERB1885C2E130GDX5D
ERB21B5C2E130GDX1L
±5%(J)
ERB1885C2E130JDX5D
ERB21B5C2E130JDX1L
±2%(G)
ERB1885C2E150GDX5D
ERB21B5C2E150GDX1L
±5%(J)
ERB1885C2E150JDX5D
ERB21B5C2E150JDX1L
16pF(160)
±2%(G)
ERB1885C2E160GDX5D
ERB21B5C2E160GDX1L
±5%(J)
ERB1885C2E160JDX5D
ERB21B5C2E160JDX1L
18pF(180)
±2%(G)
ERB1885C2E180GDX5D
ERB21B5C2E180GDX1L
±5%(J)
ERB1885C2E180JDX5D
ERB21B5C2E180JDX1L
20pF(200)
±2%(G)
ERB1885C2E200GDX5D
ERB21B5C2E200GDX1L
±5%(J)
ERB1885C2E200JDX5D
ERB21B5C2E200JDX1L
±2%(G)
ERB1885C2E220GDX5D
ERB21B5C2E220GDX1L
±5%(J)
ERB1885C2E220JDX5D
ERB21B5C2E220JDX1L
24pF(240)
±2%(G)
ERB1885C2E240GDX5D
ERB21B5C2E240GDX1L
±5%(J)
ERB1885C2E240JDX5D
ERB21B5C2E240JDX1L
27pF(270)
±2%(G)
ERB1885C2E270GDX5D
ERB21B5C2E270GDX1L
±5%(J)
ERB1885C2E270JDX5D
ERB21B5C2E270JDX1L
30pF(300)
±2%(G)
ERB1885C2E300GDX5D
ERB21B5C2E300GDX1L
±5%(J)
ERB1885C2E300JDX5D
ERB21B5C2E300JDX1L
±2%(G)
ERB1885C2E330GDX5D
ERB21B5C2E330GDX1L
±5%(J)
ERB1885C2E330JDX5D
ERB21B5C2E330JDX1L
7.5pF(7R5)
6
8.0pF(8R0)
8.2pF(8R2)
9.0pF(9R0)
9.1pF(9R1)
10pF(100)
15pF(150)
22pF(220)
33pF(330)
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
qProduct ID
wSeries
tTemperature Characteristics
u i o !0 iCapacitance Tolerance
q w e r t y
Packaging Code in Part Number is a code shows STD 180mm Reel Taping.
(Part Number) ER
112
B
18
8
5C 2E
6R2
B
DX1 D
eDimension (LxW)
yRated Voltage
oIndividual Specification Code
rDimension (T)
uCapacitance
!0Packaging
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Compensating Type C0G(5C) Characteristics
1.6x0.8(18)<0603>
LxW [mm]
250(2E)
Rated Volt. [Vdc]
Capacitance
2.0x1.25(21)<0805>
250(2E)
Tolerance
100(2A)
±2%(G)
ERB1885C2E360GDX5D
±5%(J)
ERB1885C2E360JDX5D
ERB21B5C2E360JDX1L
39pF(390)
±2%(G)
ERB1885C2E390GDX5D
ERB21B5C2E390GDX1L
±5%(J)
ERB1885C2E390JDX5D
ERB21B5C2E390JDX1L
43pF(430)
±2%(G)
ERB1885C2E430GDX5D
ERB21B5C2E430GDX1L
±5%(J)
ERB1885C2E430JDX5D
ERB21B5C2E430JDX1L
47pF(470)
±2%(G)
ERB1885C2E470GDX5D
ERB21B5C2E470GDX1L
±5%(J)
ERB1885C2E470JDX5D
ERB21B5C2E470JDX1L
51pF(510)
±2%(G)
ERB1885C2E510GDX5D
ERB21B5C2E510GDX1L
±5%(J)
ERB1885C2E510JDX5D
ERB21B5C2E510JDX1L
56pF(560)
±2%(G)
ERB1885C2E560GDX5D
ERB21B5C2E560GDX1L
±5%(J)
ERB1885C2E560JDX5D
ERB21B5C2E560JDX1L
62pF(620)
±2%(G)
ERB1885C2E620GDX5D
ERB21B5C2E620GDX1L
±5%(J)
ERB1885C2E620JDX5D
ERB21B5C2E620JDX1L
68pF(680)
±2%(G)
ERB1885C2E680GDX5D
ERB21B5C2E680GDX1L
±5%(J)
ERB1885C2E680JDX5D
ERB21B5C2E680JDX1L
±2%(G)
ERB1885C2E750GDX5D
ERB21B5C2E750GDX1L
±5%(J)
ERB1885C2E750JDX5D
ERB21B5C2E750JDX1L
82pF(820)
±2%(G)
ERB1885C2E820GDX5D
ERB21B5C2E820GDX1L
±5%(J)
ERB1885C2E820JDX5D
ERB21B5C2E820JDX1L
91pF(910)
±2%(G)
ERB1885C2E910GDX5D
ERB21B5C2E910GDX1L
±5%(J)
ERB1885C2E910JDX5D
ERB21B5C2E910JDX1L
100pF(101)
±2%(G)
ERB1885C2E101GDX5D
ERB21B5C2E101GDX1L
±5%(J)
ERB1885C2E101JDX5D
ERB21B5C2E101JDX1L
110pF(111)
±2%(G)
ERB21B5C2A111GDX1L
±5%(J)
ERB21B5C2A111JDX1L
±2%(G)
ERB21B5C2A121GDX1L
36pF(360)
75pF(750)
120pF(121)
ERB21B5C2E360GDX1L
6
±5%(J)
ERB21B5C2A121JDX1L
130pF(131)
±2%(G)
ERB21B5C2A131GDX1L
±5%(J)
ERB21B5C2A131JDX1L
150pF(151)
±2%(G)
160pF(161)
50(1H)
Part Number
ERB21B5C1H151GDX1L
±5%(J)
ERB21B5C1H151JDX1L
±2%(G)
ERB21B5C1H161GDX1L
±5%(J)
The part number code is shown in ( ) and Unit is shown in [ ].
ERB21B5C1H161JDX1L
< >: EIA [inch] Code
113
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Compensating Type C0G(5C) Characteristics
3.2x2.5(32)<1210>
LxW [mm]
500(2H)
Rated Volt. [Vdc]
Capacitance
Tolerance
3.3pF(3R3)
3.6pF(3R6)
3.9pF(3R9)
4.0pF(4R0)
4.3pF(4R3)
6
4.7pF(4R7)
5.0pF(5R0)
5.1pF(5R1)
5.6pF(5R6)
6.0pF(6R0)
6.2pF(6R2)
6.8pF(6R8)
7.0pF(7R0)
7.5pF(7R5)
8.0pF(8R0)
8.2pF(8R2)
9.0pF(9R0)
9.1pF(9R1)
10pF(100)
3.2x2.5(32)<1210>
500(2H)
Rated Volt. [Vdc]
Capacitance
Part Number
±0.1pF(B)
ERB32Q5C2H3R3BDX1L
±0.25pF(C)
ERB32Q5C2H3R3CDX1L
±0.1pF(B)
ERB32Q5C2H3R6BDX1L
±0.25pF(C)
ERB32Q5C2H3R6CDX1L
±0.1pF(B)
ERB32Q5C2H3R9BDX1L
±0.25pF(C)
ERB32Q5C2H3R9CDX1L
±0.1pF(B)
ERB32Q5C2H4R0BDX1L
±0.25pF(C)
ERB32Q5C2H4R0CDX1L
±0.1pF(B)
ERB32Q5C2H4R3BDX1L
±0.25pF(C)
ERB32Q5C2H4R3CDX1L
±0.1pF(B)
ERB32Q5C2H4R7BDX1L
±0.25pF(C)
ERB32Q5C2H4R7CDX1L
±0.1pF(B)
ERB32Q5C2H5R0BDX1L
±0.25pF(C)
ERB32Q5C2H5R0CDX1L
±0.1pF(B)
ERB32Q5C2H5R1BDX1L
±0.25pF(C)
ERB32Q5C2H5R1CDX1L
±0.5pF(D)
ERB32Q5C2H5R1DDX1L
±0.1pF(B)
ERB32Q5C2H5R6BDX1L
±0.25pF(C)
ERB32Q5C2H5R6CDX1L
±0.5pF(D)
ERB32Q5C2H5R6DDX1L
±0.1pF(B)
ERB32Q5C2H6R0BDX1L
±0.25pF(C)
ERB32Q5C2H6R0CDX1L
±0.5pF(D)
ERB32Q5C2H6R0DDX1L
±0.1pF(B)
ERB32Q5C2H6R2BDX1L
±0.25pF(C)
ERB32Q5C2H6R2CDX1L
±0.5pF(D)
ERB32Q5C2H6R2DDX1L
±0.1pF(B)
ERB32Q5C2H6R8BDX1L
±0.25pF(C)
ERB32Q5C2H6R8CDX1L
±0.5pF(D)
ERB32Q5C2H6R8DDX1L
±0.1pF(B)
ERB32Q5C2H7R0BDX1L
±0.25pF(C)
ERB32Q5C2H7R0CDX1L
±0.5pF(D)
ERB32Q5C2H7R0DDX1L
±0.1pF(B)
ERB32Q5C2H7R5BDX1L
±0.25pF(C)
ERB32Q5C2H7R5CDX1L
±0.5pF(D)
ERB32Q5C2H7R5DDX1L
±0.1pF(B)
ERB32Q5C2H8R0BDX1L
±0.25pF(C)
ERB32Q5C2H8R0CDX1L
±0.5pF(D)
ERB32Q5C2H8R0DDX1L
±0.1pF(B)
ERB32Q5C2H8R2BDX1L
±0.25pF(C)
ERB32Q5C2H8R2CDX1L
±0.5pF(D)
ERB32Q5C2H8R2DDX1L
±0.1pF(B)
ERB32Q5C2H9R0BDX1L
±0.25pF(C)
ERB32Q5C2H9R0CDX1L
±0.5pF(D)
ERB32Q5C2H9R0DDX1L
±0.1pF(B)
ERB32Q5C2H9R1BDX1L
±0.25pF(C)
ERB32Q5C2H9R1CDX1L
±0.5pF(D)
ERB32Q5C2H9R1DDX1L
±2%(G)
ERB32Q5C2H100GDX1L
±5%(J)
ERB32Q5C2H100JDX1L
The part number code is shown in ( ) and Unit is shown in [ ].
LxW [mm]
11pF(110)
Tolerance
±2%(G)
114
B
32
Q 5C 2H
3R3
B
ERB32Q5C2H110GDX1L
±5%(J)
ERB32Q5C2H110JDX1L
12pF(120)
±2%(G)
ERB32Q5C2H120GDX1L
±5%(J)
ERB32Q5C2H120JDX1L
13pF(130)
±2%(G)
ERB32Q5C2H130GDX1L
±5%(J)
ERB32Q5C2H130JDX1L
15pF(150)
±2%(G)
ERB32Q5C2H150GDX1L
±5%(J)
ERB32Q5C2H150JDX1L
16pF(160)
±2%(G)
ERB32Q5C2H160GDX1L
±5%(J)
ERB32Q5C2H160JDX1L
±2%(G)
ERB32Q5C2H180GDX1L
18pF(180)
±5%(J)
ERB32Q5C2H180JDX1L
20pF(200)
±2%(G)
ERB32Q5C2H200GDX1L
±5%(J)
ERB32Q5C2H200JDX1L
22pF(220)
±2%(G)
ERB32Q5C2H220GDX1L
±5%(J)
ERB32Q5C2H220JDX1L
±2%(G)
ERB32Q5C2H240GDX1L
24pF(240)
±5%(J)
ERB32Q5C2H240JDX1L
27pF(270)
±2%(G)
ERB32Q5C2H270GDX1L
±5%(J)
ERB32Q5C2H270JDX1L
30pF(300)
±2%(G)
ERB32Q5C2H300GDX1L
±5%(J)
ERB32Q5C2H300JDX1L
33pF(330)
±2%(G)
ERB32Q5C2H330GDX1L
±5%(J)
ERB32Q5C2H330JDX1L
36pF(360)
±2%(G)
ERB32Q5C2H360GDX1L
±5%(J)
ERB32Q5C2H360JDX1L
±2%(G)
ERB32Q5C2H390GDX1L
39pF(390)
±5%(J)
ERB32Q5C2H390JDX1L
43pF(430)
±2%(G)
ERB32Q5C2H430GDX1L
±5%(J)
ERB32Q5C2H430JDX1L
47pF(470)
±2%(G)
ERB32Q5C2H470GDX1L
±5%(J)
ERB32Q5C2H470JDX1L
±2%(G)
ERB32Q5C2H510GDX1L
51pF(510)
±5%(J)
ERB32Q5C2H510JDX1L
56pF(560)
±2%(G)
ERB32Q5C2H560GDX1L
±5%(J)
ERB32Q5C2H560JDX1L
62pF(620)
±2%(G)
ERB32Q5C2H620GDX1L
±5%(J)
ERB32Q5C2H620JDX1L
68pF(680)
±2%(G)
ERB32Q5C2H680GDX1L
±5%(J)
ERB32Q5C2H680JDX1L
75pF(750)
±2%(G)
ERB32Q5C2H750GDX1L
±5%(J)
ERB32Q5C2H750JDX1L
±2%(G)
ERB32Q5C2H820GDX1L
82pF(820)
±5%(J)
ERB32Q5C2H820JDX1L
91pF(910)
±2%(G)
ERB32Q5C2H910GDX1L
±5%(J)
ERB32Q5C2H910JDX1L
100pF(101)
±2%(G)
ERB32Q5C2H101GDX1L
±5%(J)
ERB32Q5C2H101JDX1L
< >: EIA [inch] Code
qProduct ID
wSeries
tTemperature Characteristics
u i o !0 iCapacitance Tolerance
q w e r t y
Packaging Code in Part Number is a code shows STD 180mm Reel Taping.
(Part Number) ER
Part Number
DX1 L
eDimension (LxW)
yRated Voltage
oIndividual Specification Code
rDimension (T)
uCapacitance
!0Packaging
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Temperature Compensating Type C0G(5C) Characteristics
3.2x2.5(32)<1210>
LxW [mm]
500(2H)
Rated Volt. [Vdc]
Capacitance
110pF(111)
300(YD)
Tolerance
±2%(G)
250(2E)
ERB32Q5C2H111GDX1L
±5%(J)
ERB32Q5C2H111JDX1L
120pF(121)
±2%(G)
ERB32Q5C2H121GDX1L
±5%(J)
ERB32Q5C2H121JDX1L
130pF(131)
±2%(G)
ERB32Q5CYD131GDX1L
±5%(J)
ERB32Q5CYD131JDX1L
150pF(151)
±2%(G)
ERB32Q5CYD151GDX1L
±5%(J)
ERB32Q5CYD151JDX1L
160pF(161)
±2%(G)
180pF(181)
200pF(201)
100(2A)
Part Number
ERB32Q5C2E161GDX1L
±5%(J)
ERB32Q5C2E161JDX1L
±2%(G)
ERB32Q5C2E181GDX1L
±5%(J)
ERB32Q5C2E181JDX1L
±2%(G)
ERB32Q5C2E201GDX1L
±5%(J)
ERB32Q5C2E201JDX1L
220pF(221)
±2%(G)
ERB32Q5C2E221GDX1L
±5%(J)
ERB32Q5C2E221JDX1L
240pF(241)
±2%(G)
6
ERB32Q5C2A241GDX1L
±5%(J)
ERB32Q5C2A241JDX1L
270pF(271)
±2%(G)
ERB32Q5C2A271GDX1L
±5%(J)
ERB32Q5C2A271JDX1L
300pF(301)
±2%(G)
ERB32Q5C2A301GDX1L
±5%(J)
ERB32Q5C2A301JDX1L
330pF(331)
±2%(G)
ERB32Q5C2A331GDX1L
±5%(J)
ERB32Q5C2A331JDX1L
360pF(361)
±2%(G)
ERB32Q5C2A361GDX1L
±5%(J)
ERB32Q5C2A361JDX1L
390pF(391)
±2%(G)
ERB32Q5C2A391GDX1L
±5%(J)
ERB32Q5C2A391JDX1L
430pF(431)
±2%(G)
ERB32Q5C2A431GDX1L
±5%(J)
ERB32Q5C2A431JDX1L
470pF(471)
±2%(G)
ERB32Q5C2A471GDX1L
±5%(J)
ERB32Q5C2A471JDX1L
3.2x2.5(32)<1210>
LxW [mm]
50(1H)
Rated Volt. [Vdc]
Capacitance
510pF(511)
Tolerance
±2%(G)
Part Number
ERB32Q5C1H511GDX1L
±5%(J)
ERB32Q5C1H511JDX1L
560pF(561)
±2%(G)
ERB32Q5C1H561GDX1L
±5%(J)
ERB32Q5C1H561JDX1L
620pF(621)
±2%(G)
ERB32Q5C1H621GDX1L
±5%(J)
ERB32Q5C1H621JDX1L
680pF(681)
±2%(G)
ERB32Q5C1H681GDX1L
±5%(J)
ERB32Q5C1H681JDX1L
750pF(751)
±2%(G)
ERB32Q5C1H751GDX1L
±5%(J)
ERB32Q5C1H751JDX1L
820pF(821)
±2%(G)
ERB32Q5C1H821GDX1L
±5%(J)
ERB32Q5C1H821JDX1L
910pF(911)
±2%(G)
ERB32Q5C1H911GDX1L
±5%(J)
ERB32Q5C1H911JDX1L
1000pF(102)
±2%(G)
ERB32Q5C1H102GDX1L
±5%(J)
ERB32Q5C1H102JDX1L
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
115
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
ERB Series Specifications and Test Methods
Method (1)
Item
1
Operating
Temperature Range
Specifications
Test Method
Y55 to W125D
Reference Temperature: 25°C
See the previous pages.
The rated voltage is defined as the maximum voltage which
may be applied continuously to the capacitor.
When AC voltage is superimposed on DC voltage, VP-P or VO-P,
whichever is larger, should be maintained within the rated
voltage range.
2
Rated Voltage
3
Appearance
No defects or abnormalities
Visual inspection
4
Dimensions
Within the specified dimension
Using calipers
5
Dielectric Strength
No defects or abnormalities
No failure should be observed when 300%(*) of the rated voltage is applied between the terminations for 1 to 5 seconds,
provided the charge/discharge current is less than 50mA.
(*) 300V: 250%, 500V: 200%
6
Insulation Resistance 1,000,000MΩ min. (CV470pF)
0,100,000MΩ min. (CG470pF)
(I.R.)
7
Capacitance
Within the specified tolerance
Q
220pF<CV1,220pF : QU10,000
220pF<CV1,470pF : QU15,000
470pF<CV1,000pF : QU13,000
C: Nominal Capacitance (pF)
8
9
The insulation resistance should be measured with a DC
voltage not exceeding the rated voltage at 25D and standard
humidity and within 2 minutes of charging.
The capacitance/Q should be measured at 25D at the
frequency and voltage shown in the table.
Frequency
Voltage
Capacitance
Change
Within the specified tolerance (Table A-6)
Temperature
Coefficient
Within the specified tolerance (Table A-6)
Capacitance
Drift
Within T0.2% or T0.05pF
(Whichever is larger)
No removal of the terminations or other defects should occur.
c
Adhesive Strength
of Termination
3
25T2
4
125T3
5
25T2
Solder the capacitor on the test jig (glass epoxy board) shown
in Fig. 1 using an eutectic solder.
Then apply 10N* force in parallel with the test jig for 10±1sec.
The soldering should be done either with an iron or using the
reflow method and should be conducted with care so that the
soldering is uniform and free of defects such as heat shock.
a
10
1T0.1MHz
1T0.2Vrms
The temperature coefficient is determined using the
capacitance measured in step 3 as a reference. When cycling
the temperature sequentially from step 1 through 5, the
capacitance should be within the specified tolerance for the
temperature coefficient and capacitance change as Table A.
The capacitance drift is calculated by dividing the differences
between the maximum and minimum measured values in steps
1, 3 and 5 by the capacitance value in step 3.
Step
Temperature (D)
1
25T2
2
Y55T3
Capacitance
Temperature
Characteristics
b
6
No.
Solder Resist
Fig.1
Baked Electrode or
Copper Foil
Type
ERB18
ERB21
ERB32
a
1.0
1.2
2.2
b
3.0
4.0
5.0
c
1.2
1.65
2.9
(in mm)
*5N (ERB188)
Continued on the following page.
116
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
ERB Series Specifications and Test Method
(1) Specifications and Test Methods
ERB Series
Continued from the preceding page.
11
Specifications
Item
Appearance
No defects or abnormalities
Capacitance
Within the specified tolerance
Q
Satisfies the initial value.
220pFFCV1,220pF : QU10,000
220pFFCV1,470pF : QU15,000
470pFFCV1,000pF : QU13,000
C: Nominal Capacitance (pF)
Vibration
Resistance
Appearance
No marking defects
Capacitance
Change
Within T5% or T0.5pF
(Whichever is larger)
20
Deflection
Solder the capacitor to the test jig (glass epoxy board) in the
same manner and under the same conditions as (10).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz.
The frequency range, from 10 to 55Hz and return to 10Hz,
should be traversed in approximately 1 minute. This motion
should be applied for a period of 2 hours in each of 3 mutually
perpendicular directions (total of 6 hours).
50 Pressurizing
speed : 1.0mm/sec.
Pressurize
b
ø4.5
R230
Flexure : V1
c
a
Capacitance meter
45
45
Fig.3a
13
Solderability of
Termination
Resistance
to Soldering Heat
Q
Dielectric Strength
a
1.0
1.2
2.2
b
3.0
4.0
5.0
c
1.2
1.65
2.9
(in mm)
t : 1.6mm
Fig. 2a
95% of the terminations are to be soldered evenly and
continuously.
Item
Appearance
Capacitance
Change
Type
ERB18
ERB21
ERB32
100
The measured and observed characteristics should satisfy the
specifications in the following table.
14
Solder the capacitor on the test jig (glass epoxy board) shown
in Fig. 2a using an eutectic solder. Then apply a force in the
direction shown in Fig. 3a. The soldering should be done by
the reflow method and should be conducted with care so that
the soldering is uniform and free of defects such as heat shock.
±¬­¨©_`¥[\WXT
°®ª«¦]YZU¢£¤§¨QRSVW,
®¯]^
12
Test Method
40
No.
Specifications
No marked defect
Within T2.5% or T0.25pF
(Whichever is larger)
220pFFCV1,220pF : QU10,000
220pFFCV1,470pF : QU15,000
470pFFCV1,000pF : QU13,000
No failure
Immerse the capacitor in a solution of isopropyl alcohol and
rosin (25% rosin in weight proportion).
Preheat at 80 to 120D for 10 to 30 seconds.
After preheating, immerse in an eutectic solder
or Sn-3.0Ag-0.5Cu solder solution for 5±0.5 seconds
at 245±5D.
Preheat according to the conditions listed in the table below.
Immerse the capacitor in an eutectic solder or Sn-3.0Ag-0.5Cu
solder solution at 270±5D for 10±0.5 seconds. Let sit at room
temperature for 24±2 hours.
Chip Size
2.0Z1.25mm max.
3.2Z2.5mm
Preheat Condition
1minute at 120 to 150D
Each 1 minute at 100 to 120D and then 170 to 200D
C: Nominal Capacitance (pF)
The measured and observed characteristics should satisfy the
specifications in the following table.
15
Temperature
Cycle
Item
Appearance
Capacitance
Change
Q
I.R.
Dielectric Strength
Specifications
No marked defect
Within T5% or T0.5pF
(Whichever is larger)
10pFVCU30pF : QU350
10pFVCF30pF : QU275W 5
2 C
10pFVCF10pF : QU200W10C
1,000MΩ min.
No failure
Fix the capacitor to the supporting jig in the same manner and
under the same conditions as (10). Perform the five cycles
according to the four heat treatments listed in the following table.
Let sit for 24T2 hours at room temperature, then measure.
Step
1
2
3
4
Min.
Max.
Room
Room
Operating
Operating
Temp. (D)
Temp.
Temp.
Temp. W0/Y3
Temp. W3/Y0
Time (min.)
30T3
5 max.
30T3
5 max.
C: Nominal Capacitance (pF)
Continued on the following page.
117
6
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
ERB Series Specifications and Test Methods
Method (1)
Continued from the preceding page.
No.
Specifications
Item
Test Method
16
Humidity
The measured and observed characteristics should satisfy the
specifications in the following table.
Item
Specifications
No marked defect
Appearance
Within T5% or T0.5pF
Capacitance
(Whichever is larger)
Change
10pFVCU30pF : QU350
10pFVCF30pF : QU275W 5
2 C
Q
10pFVCF10pF : QU200W10C
1,000MΩ min.
I.R.
C: Nominal Capacitance (pF)
6
Temperature
Apply the 24-hour heat (Y10 to W65D) and humidity (80 to 100%)
treatment shown below, 10 consecutive times. Remove, let sit for
24T2 hours at room temperature, and measure.
D
70
65
60
55
50
45
40
35
30
25
20
15
10
5
0
-5
-10
Humidity
Humidity
Humidity 80-98% Humidity 80-98%
90-98%
Humidity90-98%
90-98%
+10
-2 D
Initial measurement
Applied voltage 50Vdc
One cycle 24 hours
0 1 2 3 4 5 6 7 8 9 10 1112 13 14 15 16 17 18 19 2021 22 23 24
Hours
The measured and observed characteristics should satisfy the
specifications in the following table.
17
High Temperature
Load
Item
Appearance
Capacitance
Change
Q
I.R.
Specifications
No marked defect
Within T3% or T0.3pF
(Whichever is larger)
10pFVCU30pF : QU350
10pFVCF30pF : QU275W 5
2 C
10pFVCF10pF : QU200W10C
1,000MΩ min.
Apply 200% (500V only 150%) of the rated voltage for 1,000T12
hours at 125T3D.
Remove and let sit for 24T2 hours at room temperature, then measure.
The charge/discharge current is less than 50mA.
C: Nominal Capacitance (pF)
Table A-6
Capacitance Change from 25D (%)
Char.
Nominal Values
(ppm/D) Note 1
Y55
Max.
Min.
Max.
0T30
Y0.24
0.58
0.40
5C
Note 1: Nominal values denote the temperature coefficient within a range of 25 to 125D (for 5C)
118
Y30
Y10
Min.
Y0.17
Max.
0.25
Min.
Y0.11
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
ERB Series Data
ERB Series Data
■ Q - Frequency Characteristics
■ Impedance - Frequency Characteristics
ERB Series
ERB Series
ERB21
100000
ERB21
100k
10k
10000
PARALLEL
RESONANCE
1k
1000
100
Impedance (Ohm)
Q
1pF
100
10pF
10
10
1
1pF
100pF
6
10pF
100m
100pF
1
10m
measured by
BOONTON RESONANT
COAXIAL-LINE 34A
0.1
100M
1G
Frequency (Hz)
1m
1M
10G
■ ESR - Frequency Characteristics
10M
1G
10G
■ Self Resonant Frequency - Capacitance
ERB Series
ERB Series
ERB21
100G
Self Resonant Frequency (Hz)
1
ESR (Ohm)
100M
Frequency (Hz)
1pF
10pF
100pF
0.1
13
10G
ERB21
1G
ERB32
measured by
BOONTON RESONANT
COAXIAL-LINE 34A
0.01
100M
1G
100M
0.1
10G
1
10
Capacitance (pF)
Frequency (Hz)
■ Allowable Voltage - Frequency
[∆T=20˚C]
[∆T=20˚C]
10
F
p
00
ERB32
10
B2
1
B3
2
F
0p
10
100m
1
100pF
1000pF
0.1
10M
ERB21
1
Ia (Arms)
Va (Vrms)
ER
ER
1000
■ Allowable Current - Frequency
100
10
100
100M
1G
Frequency (Hz)
10G
10m
10M
100M
1G
10G
Frequency (Hz)
Continued on the following page.
119
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
ERB Series Data
Continued from the preceding page.
■ Allowable Apparent Power - Frequency
■ Allowable Effective Power - Frequency
[∆T=20˚C]
100
B2
1
Pe (W)
10
00
pF
0
10
ER
100m
pF
Pa (VA)
B3
1
B2
2
ER
10
ER
pF
00
2
B3
ER
10
[∆T=20˚C]
1
10m
10
0p
F
1
0.1
10M
100M
1G
Frequency (Hz)
6
10G
1m
10M
100M
1G
10G
Frequency (Hz)
13
120
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Monolithic Ceramic Capacitors
Monolithic Microchip GMA Series
L
W
■ Features
T
1. Better micro wave characteristics
2. Suitable for by-passing
3. High density mounting
Outer electrode: Au plated
■ Applications
1. Optical device for telecommunication
2. IC, IC packaging built-in
3. Measuring equipment
Part Number
GMA0D3
GMA05X
GMA085
L
0.38 ±0.05
0.5 ±0.05
0.8 ±0.05
Dimensions (mm)
W
0.38 ±0.05
0.5 ±0.05
0.8 ±0.05
T
0.3 ±0.05
0.35 ±0.05
0.5 ±0.1
7
Capacitance Table
High Dielectric Constant Type X7R(R7)/X5R(R6) Characteristics
X
ex.X: T Dimension [mm]
LxW 0.38x0.38
(0D)
[mm] <015015>
Rated Voltage
[Vdc]
10
(1A)
TC
X7R
(R7)
Capacitance
0.5x0.5
(05)
<0202>
100
(2A)
25
(1E)
0.8x0.8
(08)
<0303>
10
(1A)
X7R
(R7)
100pF(101)
X
150pF(151)
X
220pF(221)
X
330pF(331)
X
470pF(471)
X
680pF(681)
X
1000pF(102)
X
6.3
(0J)
100
(2A)
X5R
(R6)
X
5
2200pF(222)
X
5
3300pF(332)
X
5
4700pF(472)
X
10000pF(103)
X5R
(R6)
5
X
5
15000pF(153)
X
5
22000pF(223)
X
5
33000pF(333)
5
47000pF(473)
5
68000pF(683)
5
0.10µF(104)
X
0.47µF(474)
The part number code is shown in ( ) and Unit is shown in [ ].
6.3
(0J)
5
X
3
10
(1A)
X7R
(R7)
1500pF(152)
6800pF(682)
25
(1E)
5
5
< >: EIA [inch] Code
121
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Dielectric Constant Type X7R(R7)/X5R(R6) Characteristics
0.38x0.38(0D)<015015>
LxW [mm]
10(1A)
Rated Volt. [Vdc]
Capacitance
Tolerance
Part Number
±20%(M)
10000pF(103)
GMA0D3R71A103MA01T
0.5x0.5(05)<0202>
LxW [mm]
100(2A)
Rated Volt. [Vdc]
Capacitance
7
25(1E)
Tolerance
10(1A)
6.3(0J)
Part Number
100pF(101)
±20%(M)
GMA05XR72A101MA01T
150pF(151)
±20%(M)
GMA05XR72A151MA01T
220pF(221)
±20%(M)
GMA05XR72A221MA01T
330pF(331)
±20%(M)
GMA05XR72A331MA01T
470pF(471)
±20%(M)
GMA05XR72A471MA01T
680pF(681)
±20%(M)
GMA05XR72A681MA01T
1000pF(102)
±20%(M)
GMA05XR72A102MA01T
1500pF(152)
±20%(M)
GMA05XR71E152MA11T
2200pF(222)
±20%(M)
GMA05XR71E222MA11T
3300pF(332)
±20%(M)
GMA05XR71E332MA11T
4700pF(472)
±20%(M)
GMA05XR71E472MA11T
6800pF(682)
±20%(M)
GMA05XR71A682MA01T
10000pF(103)
±20%(M)
GMA05XR71A103MA01T
15000pF(153)
±20%(M)
GMA05XR71A153MA01T
22000pF(223)
±20%(M)
GMA05XR71A223MA01T
33000pF(333)
±20%(M)
47000pF(473)
±20%(M)
68000pF(683)
±20%(M)
0.10µF(104)
±20%(M)
GMA05XR60J104ME12T*
0.8x0.8(08)<0303>
LxW [mm]
100(2A)
Rated Volt. [Vdc]
Capacitance
25(1E)
Tolerance
10(1A)
6.3(0J)
Part Number
1500pF(152)
±20%(M)
GMA085R72A152MA01T
2200pF(222)
±20%(M)
GMA085R72A222MA01T
3300pF(332)
±20%(M)
GMA085R72A332MA01T
4700pF(472)
±20%(M)
GMA085R72A472MA01T
6800pF(682)
±20%(M)
GMA085R72A682MA01T
10000pF(103)
±20%(M)
GMA085R71E103MA11T
15000pF(153)
±20%(M)
GMA085R71E153MA11T
22000pF(223)
±20%(M)
GMA085R71E223MA11T
33000pF(333)
±20%(M)
GMA085R71A333MA01T
47000pF(473)
±20%(M)
GMA085R71A473MA01T
68000pF(683)
±20%(M)
GMA085R71A683MA01T
0.10µF(104)
±20%(M)
GMA085R71A104MA01T
0.47µF(474)
±20%(M)
GMA085R60J474ME12T*
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
*: Please refer to GMA series Specifications and Test Method(2).
(Part Number) GM
A
0D
3
R7 1A
q
w
e
r t
y
103
M
u
i
A01 T
o
Packaging Code in Part Number is a code shows STD Tray.
122
!0
qProduct ID
wSeries
tTemperature Characteristics
iCapacitance Tolerance
eDimension (LxW)
yRated Voltage
oIndividual Specification Code
rDimension (T)
uCapacitance
!0Packaging
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GMA Series Specifications and Test
Methods
(1)
GMA
Series Specifications
and Test Methods(1)
In case Non "*" is added in PNs table, please refer to GMA Series Specifications and Test Methods (1).
In case "*" is added in PNs table, please refer to GMA Series Specifications and Test Methods (2).
No.
1
Specifications
Item
Operating
Temperature
Range
Test Method
R7: Y55 to W125D
Reference Temperature: 25D
2
Rated Voltage
See the previous pages.
The rated voltage is defined as the maximum voltage which
may be applied continuously to the capacitor.
When AC voltage is superimposed on DC voltage, VP-P or VO-P,
whichever is larger, should be maintained within the rated voltage
range.
3
Appearance
No defects or abnormalities
Visual inspection
4
Dimensions
Within the specified dimensions
Using calipers
5
Dielectric Strength
No defects or abnormalities
No failure should be observed when a voltage of 250% of the
rated voltage is applied between the both terminations for 1 to 5
seconds, provided the charge/discharge current is less than
50mA.
6
Insulation Resistance
More than 10,000MΩ or 500ΩF
(Whichever is smaller)
The insulation resistance should be measured with a DC
voltage not exceeding the rated voltage at normal temperature
and humidity and within 2 minutes of charging.
7
Capacitance
Within the specified tolerance
8
Dissipation Factor
(D.F.)
R7: W.V.: 25V min.; 0.025 max.
R7: W.V.: 16V/10V; 0.035 max.
The capacitance/D.F. should be measured at reference
temperature at the frequency and voltage shown in the table.
Frequency
Voltage
1T0.1kHz
1T0.2Vrms
The capacitance change should be measured after 5min. at
each specified temp. stage.
#The ranges of capacitance change compared with the
Reference Temperature value over the temperature ranges
shown in the table should be within the specified ranges.*
9
Capacitance
Temperature No bias
Characteristics
R7: Within W/–15% (–55 to W125°C)
Step
1
Temperature (°C)
25T2
2
–55T3
3
25T2
4
125T3
*Initial measurement for high dielectric constant type
Perform a heat treatment at 150 W0/Y10°C for one hour and
then let sit for 24T2 hours at room temperature.
Perform the initial measurement.
10
Bond
Strength
Pull force: 0.03N min.
MIL-STD-883 Method 2011 Condition D
Mount the capacitor on a gold metallized alumina substrate with
Au-Sn (80/20) and bond a 25µm (0.001 inch) gold wire to the
capacitor terminal using an ultrasonic ball bond. Then, pull wire.
Die Shear
Strength
Die Shear force: 2N min.
MIL-STD-883 Method 2019
Mount the capacitor on a gold metallized alumina substrate
with Au-Sn (80/20). Apply the force parallel to the substrate.
Appearance
No defects or abnormalities
Mechanical
Strength
Vibration
Capacitance
11
Resistance
D.F.
Temperature
12
Cycle
Within the specified tolerance
R7: W.V.: 25V min.; 0.025 max.
R7: W.V.: 16V/10V; 0.035 max.
Appearance
No defects or abnormalities
Capacitance
Change
R7: Within T7.5%
D.F.
R7: W.V.: 25V min.; 0.025 max.
R7: W.V.: 16V/10V; 0.035 max.
I.R.
More than 10,000MΩ or 500Ω F
(Whichever is smaller)
Dielectric
Strength
No defects
Ramp frequency from 10 to 55Hz then return to 10Hz all within
1 minute. Amplitude: 1.5 mm (0.06 inch) max. total excursion.
Apply this motion for a period of 2 hours in each of 3 mutually
perpendicular directions (total 6 hours).
The capacitor should be set for 24T2 hours at room
temperature after one hour heat of treatment at 150W0/Y10D,
then measure for the initial measurement. Fix the capacitor to
the supporting jig in the same manner and under the same
conditions as (11) and conduct the five cycles according to the
temperatures and time shown in the following table. Set it for
24T2 hours at room temperature, then measure.
Step
1
2
3
4
Min. Operating Room Max. Operating Room
Temp. (D)
Temp. W0/Y3 Temp. Temp. W3/Y0 Temp.
Time (min.)
30T3
2 to 3
30T3
2 to 3
Mounting for testing: The capacitors should be mounted on the substrate as shown below using die bonding and wire bonding when tests No.11 to 15 are performed.
Continued on the following page.
123
7
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GMA Series Specifications and Test Methods(1)
Methods (1)
Continued from the preceding page.
No.
13
14
7
Specifications
Item
Appearance
No defects or abnormalities
Capacitance
Change
R7: Within T12.5%
Humidity
(Steady State) D.F.
Humidity
Load
High
15 Temperature
Load
In case Non "*" is added in PNs table, please refer to GMA Series Specifications and Test Methods (1).
In case "*" is added in PNs table, please refer to GMA Series Specifications and Test Methods (2).
Test Method
Set the capacitor for 500T12 hours at 40T2D, in 90 to 95%
humidity.
Take it out and set it for 24T2 hours at room temperature, then
measure.
R7: W.V.: 10V min.; 0.05 max.
I.R.
More than 1,000MΩ or 50Ω F
(Whichever is smaller)
Appearance
No defects or abnormalities
Capacitance
Change
R7: Within T12.5%
D.F.
R7: W.V.: 10V min.; 0.05 max.
I.R.
More than 500MΩ or 25Ω F
(Whichever is smaller)
Appearance
No defects or abnormalities
Capacitance
Change
R7: Within T12.5%
D.F.
R7: W.V.: 10V min.; 0.05 max.
I.R.
More than 1,000MΩ or 50Ω F
(Whichever is smaller)
Apply the rated voltage for 500T12 hours at 40T2D, in 90 to
95% humidity and set it for 24T2 hours at room
temperature,then measure. The charge/discharge current is
less than 50mA.
A voltage treatment should be given to the capacitor, in which a
DC voltage of 200% the rated voltage is applied for one hour at
the maximum operating temperature T3D then it should be set
for 24T2 hours at room temperature and the initial measurement
should be conducted.
Then apply the above mentioned voltage continuously for
1000T12 hours at the same temperature, remove it from the
bath, and set it for 24T2 hours at room temperature, then
measure. The charge/discharge current is less than 50mA.
Mounting for testing: The capacitors should be mounted on the substrate as shown below using die bonding and wire bonding when tests No.11 to 15 are performed.
Capacitor
Gold wire
Die bond
Gold land
Alumina substrate
Alumina substrate
124
Gold land
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GMA Series Specifications and Test
Methods
(2)
GMA
Series Specifications
and Test Methods(2)
In case Non "*" is added in PNs table, please refer to GMA Series Specifications and Test Methods (1).
In case "*" is added in PNs table, please refer to GMA Series Specifications and Test Methods (2).
No.
1
Item
Operating
Temperature
Range
Specifications
Test Method
R6 : –55°C to 85°C
Reference Temperature : 25°C
2
Rated Voltage
See the previous pages.
The rated voltage is defined as the maximum voltage which
may be applied continuously to the capacitor.
When AC voltage is superimposed on DC voltage, VP-P or VO-P,
whichever is larger, should be maintained within the rated voltage range.
3
Appearance
No defects or abnormalities.
Visual inspection.
4
Dimensions
Within the specified dimensions.
Using calipers.
5
Dielectric Strength
No defects or abnormalities.
No failure should be observed when 250% of the rated voltage
is applied between the terminations for 1 to 5 seconds, provided the charge/discharge current is less than 50mA.
6
Insulation
Resistance
More than 50Ω · F
The insulation resistance should be measured with a DC
voltage not exceeding the rated voltage at normal temperature
and humidity and within 1 minutes of charging.
7
Capacitance
Within the specified tolerance.
8
Dissipation
Factor (D.F.)
R6 : 0.1 max.
The capacitance/D.F. should be measured at reference
temperature at the frequency and voltage shown in the table.
Capacitance
CV10µF (6.3Vmax.)
Frequency
1±0.1kHz
Voltage
0.5±0.1Vrms
The capacitance change should be measured after 5min. at
each specified temp. stage.
The ranges of capacitance change compared with the
Reference Temperature value over the temperature ranges
shown in the table should be within the specified ranges.*
9
Capacitance
Temperature
Characteristics
No bias
R6 : Within ±15% (–55°C to +85°C)
Step
1
2
3
4
Temperature (°C)
25±2
–55±3
25±2
85±3
*Initial measurement for high dielectric constant type
Perform a heat treatment at 150 +0/–10°C for one hour and
then let sit for 24±2 hours at room temperature.
Perform the initial measurement.
10
Bond
Pull force : 0.03N min.
Strength
MIL-STD-883 Method 2011 Condition D
Mount the capacitor on a gold metallized alumina substrate with
Au-Sn (80/20) and bond a 25µm (0.001 inch) gold wire to the
capacitor terminal using an ultrasonic ball bond. Then, pull wire.
Die Shear
Die Shear force : 2N min.
Strength
MIL-STD-883 Method 2019
Mount the capacitor on a gold metallized alumina substrate
with Au-Sn (80/20). Apply the force parallel to the substrate.
Mechanical
Strength
Appearance No defects or abnormalities.
Vibration
11
Resistance
Capacitance Within the specified tolerance.
D.F.
R6 : 0.1 max.
Appearance No defects or abnormalities.
Capacitance
R6 : Within ±7.5%
Change
D.F.
Temperature
I.R.
12 Sudden
Change
Dielectric
Strength
R6 : 0.1 max.
More than 50Ω · F
Ramp frequency from 10 to 55Hz then return to 10Hz all within
1 minute. Amplitude : 1.5 mm (0.06 inch) max. total excursion.
Apply this motion for a period of 2 hours in each of 3 mutually
perpendicular directions (total 6 hours).
The capacitor should be set for 24±2 hours at room
temperature after one hour heat of treatment at 150+0/–10°C,
then measure for the initial measurement. Fix the capacitor to
the supporting jig in the same manner and under the same
conditions as (11) and conduct the five cycles according to the
temperatures and time shown in the following table. Set it for
48±4 hours at room temperature, then measure.
Step
No defects
1
Min.
Temp. (°C) Operating
Temp.+0/–3
Time (min.)
30±3
2
Room
Temp.
2 to 3
3
Max.
Operating
Temp. +3/–0
30±3
4
Room
Temp.
2 to 3
Mounting for testing : The capacitors should be mounted on the substrate as shown below using die bonding and wire bonding when tests No.11 to 14 are performed.
Continued on the following page.
125
7
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GMA Series Specifications and Test Methods(2)
Methods (2)
Continued from the preceding page.
No.
Item
In case Non "*" is added in PNs table, please refer to GMA Series Specifications and Test Methods (1).
In case "*" is added in PNs table, please refer to GMA Series Specifications and Test Methods (2).
Specifications
Test Method
Appearance No defects or abnormalities.
Apply the rated voltage for 500±12 hours at 40±2°C, in 90 to
95% humidity and set it for 24±2 hours at room temperature,
then measure. The charge/discharge current is less than
50mA.
Capacitance
R6 : Within ±12.5%
Change
High
Temperature
13 High
Humidity
(Steady)
D.F.
R6 : 0.2 max.
• Initial measurement
Perform a heat treatment at 150+0/–10°C for one hour and then
let sit for 24±2 hours at room temperature. Perform the initial
measurement.
I.R.
More than 12.5Ω · F
• Measurement after test
Perform a heat treatment at 150+0/–10°C for one hour and then
let sit for 24±2 hours at room temperature, then measure.
Appearance No defects or abnormalities.
Apply 150% of the rated voltage for 1000±12 hours at the
maximum operating temperature ±3°C. Let sit for 24±2 hours at
room temperature, then measure.
The charge/ discharge current is less than 50mA.
Capacitance
R6 : Within ±12.5%
Change
D.F.
7
R6 : 0.2 max.
• Initial measurement
Perform a heat treatment at 150+0/–10°C for one hour and then
let sit for 24±2 hours at room temperature. Perform the initial
measurement.
14 Durability
I.R.
More than 25Ω · F
• Measurement after test
Perform a heat treatment at 150+0/–10°C for one hour and then
let sit for 24±2 hours at room temperature, then measure.
Mounting for testing : The capacitors should be mounted on the substrate as shown below using die bonding and wire bonding when tests No.11 to 14 are performed.
Capacitor
Gold wire
Die bond
Gold land
Alumina substrate
Alumina substrate
126
Gold land
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Monolithic Ceramic Capacitors
for Bonding GMD Series
■ Features
e
1. Small chip size (LxWxT: 0.6x0.3x0.3, 1.0x0.5x0.5mm)
2. Available for Wire/Die bonding due to
Gold termination.
3. Suitable for Optical device for telecommunication,
IC packaging built-in.
■ Applications
1. Optical device for telecommunication
2. IC, IC packaging built-in
g
e
T
Outer electrode: Au
L
Part Number
GMD033
GMD155
L
0.6±0.03
1.0±0.05
W
Dimensions (mm)
W
T
e
g min.
0.3±0.03 0.3±0.03 0.12 to 0.22 0.16
0.5±0.05 0.5±0.05 0.15 to 0.35
0.3
8
127
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
High Dielectric Constant Type X7R(R7)/X5R(R6) Characteristics
3
ex.3: T Dimension [mm]
0.6x0.3
(03)
<0201>
LxW
[mm]
Rated Voltage
[Vdc]
Capacitance
8
25
(1E)
16
(1C)
1.0x0.5
(15)
<0402>
10
(1A)
50
(1H)
16
(1C)
6.3
(0J)
X7R
(R7)
TC
1.0x0.5
(15)
<0402>
10
(1A)
100pF(101)
3
120pF(121)
3
150pF(151)
3
180pF(181)
3
220pF(221)
3
5
270pF(271)
3
5
330pF(331)
3
5
390pF(391)
3
5
470pF(471)
3
5
560pF(561)
3
5
680pF(681)
3
5
820pF(821)
3
5
1000pF(102)
3
5
1200pF(122)
3
5
1500pF(152)
3
5
1800pF(182)
3
5
2200pF(222)
3
5
2700pF(272)
3
5
3300pF(332)
3
5
3900pF(392)
3
5
4700pF(472)
3
5
5600pF(562)
3
5
6800pF(682)
3
5
8200pF(822)
3
5
10000pF(103)
3
5
12000pF(123)
5
15000pF(153)
5
18000pF(183)
5
22000pF(223)
5
27000pF(273)
5
33000pF(333)
5
39000pF(393)
5
47000pF(473)
5
56000pF(563)
5
3
68000pF(683)
5
3
82000pF(823)
5
3
0.10µF(104)
5
3
0.12µF(124)
5
0.15µF(154)
5
0.18µF(184)
5
0.22µF(224)
5
0.27µF(274)
5
0.33µF(334)
5
0.39µF(394)
5
0.47µF(474)
5
The part number code is shown in ( ) and Unit is shown in [ ].
6.3
(0J)
X5R
(R6)
1.0µF(105)
128
25
(1E)
0.6x0.3
(03)
<0201>
5
< >: EIA [inch] Code
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Dielectric Constant Type X7R(R7) Characteristics
0.6x0.3(03)<0201>
LxW [mm]
25(1E)
Rated Volt. [Vdc]
Capacitance
16(1C)
Tolerance
10(1A)
Part Number
100pF(101)
±10%(K)
GMD033R71E101KA01D
120pF(121)
±10%(K)
GMD033R71E121KA01D
150pF(151)
±10%(K)
GMD033R71E151KA01D
180pF(181)
±10%(K)
GMD033R71E181KA01D
220pF(221)
±10%(K)
GMD033R71E221KA01D
270pF(271)
±10%(K)
GMD033R71E271KA01D
330pF(331)
±10%(K)
GMD033R71E331KA01D
390pF(391)
±10%(K)
GMD033R71E391KA01D
470pF(471)
±10%(K)
GMD033R71E471KA01D
560pF(561)
±10%(K)
GMD033R71E561KA01D
680pF(681)
±10%(K)
GMD033R71E681KA01D
820pF(821)
±10%(K)
GMD033R71E821KA01D
1000pF(102)
±10%(K)
GMD033R71E102KA01D
1200pF(122)
±10%(K)
GMD033R71E122KA01D
1500pF(152)
±10%(K)
GMD033R71E152KA01D
1800pF(182)
±10%(K)
GMD033R71C182KA11D
2200pF(222)
±10%(K)
GMD033R71C222KA11D
2700pF(272)
±10%(K)
GMD033R71C272KA11D
3300pF(332)
±10%(K)
GMD033R71C332KA11D
3900pF(392)
±10%(K)
GMD033R71A392KA01D
4700pF(472)
±10%(K)
GMD033R71A472KA01D
5600pF(562)
±10%(K)
GMD033R71A562KA01D
6800pF(682)
±10%(K)
GMD033R71A682KA01D
8200pF(822)
±10%(K)
GMD033R71A822KA01D
10000pF(103)
±10%(K)
GMD033R71A103KA01D
The part number code is shown in ( ) and Unit is shown in [ ].
8
< >: EIA [inch] Code
129
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Dielectric Constant Type X7R(R7) Characteristics
1.0x0.5(15)<0402>
LxW [mm]
50(1H)
Rated Volt. [Vdc]
Capacitance
25(1E)
Tolerance
16(1C)
Part Number
220pF(221)
±10%(K)
GMD155R71H221KA01D
270pF(271)
±10%(K)
GMD155R71H271KA01D
330pF(331)
±10%(K)
GMD155R71H331KA01D
390pF(391)
±10%(K)
GMD155R71H391KA01D
470pF(471)
±10%(K)
GMD155R71H471KA01D
560pF(561)
±10%(K)
GMD155R71H561KA01D
680pF(681)
±10%(K)
GMD155R71H681KA01D
820pF(821)
±10%(K)
GMD155R71H821KA01D
1000pF(102)
±10%(K)
GMD155R71H102KA01D
1200pF(122)
±10%(K)
GMD155R71H122KA01D
1500pF(152)
±10%(K)
GMD155R71H152KA01D
1800pF(182)
±10%(K)
GMD155R71H182KA01D
2200pF(222)
±10%(K)
GMD155R71H222KA01D
2700pF(272)
±10%(K)
GMD155R71H272KA01D
3300pF(332)
±10%(K)
GMD155R71H332KA01D
3900pF(392)
±10%(K)
GMD155R71H392KA01D
4700pF(472)
±10%(K)
GMD155R71H472KA01D
5600pF(562)
±10%(K)
GMD155R71E562KA01D
6800pF(682)
±10%(K)
GMD155R71E682KA01D
8200pF(822)
±10%(K)
GMD155R71E822KA01D
10000pF(103)
±10%(K)
GMD155R71E103KA01D
12000pF(123)
±10%(K)
GMD155R71E123KA01D
15000pF(153)
±10%(K)
GMD155R71E153KA01D
18000pF(183)
±10%(K)
GMD155R71E183KA01D
22000pF(223)
±10%(K)
GMD155R71E223KA01D
27000pF(273)
±10%(K)
GMD155R71E273KA11D
33000pF(333)
±10%(K)
GMD155R71E333KA11D
39000pF(393)
±10%(K)
GMD155R71E393KA11D
47000pF(473)
±10%(K)
GMD155R71E473KA11D
56000pF(563)
±10%(K)
GMD155R71C563KA11D
68000pF(683)
±10%(K)
GMD155R71C683KA11D
82000pF(823)
±10%(K)
GMD155R71C823KA11D
0.10µF(104)
±10%(K)
8
GMD155R71C104KA11D
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
qProduct ID
wSeries
tTemperature Characteristics
u i o !0 iCapacitance Tolerance
q w e r t y
Packaging Code in Part Number is a code shows STD 180mm Reel Taping.
(Part Number) GM
130
D
15
5
R7 1H
221
K
A01 D
eDimension (LxW)
yRated Voltage
oIndividual Specification Code
rDimension (T)
uCapacitance
!0Packaging
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High Dielectric Constant Type X5R(R6) Characteristics
0.6x0.3(03)<0201>
LxW [mm]
6.3(0J)
Rated Volt. [Vdc]
Capacitance
Tolerance
1.0x0.5(15)<0402>
10(1A)
6.3(0J)
Part Number
56000pF(563)
±10%(K)
GMD033R60J563KE11D*
68000pF(683)
±10%(K)
GMD033R60J683KE11D*
82000pF(823)
±10%(K)
GMD033R60J823KE11D*
0.10µF(104)
±10%(K)
GMD033R60J104KE11D*
0.12µF(124)
±10%(K)
GMD155R61A124KE12D*
0.15µF(154)
±10%(K)
GMD155R61A154KE12D*
0.18µF(184)
±10%(K)
GMD155R61A184KE12D*
0.22µF(224)
±10%(K)
GMD155R61A224KE12D*
0.27µF(274)
±10%(K)
GMD155R61A274KE11D*
0.33µF(334)
±10%(K)
GMD155R61A334KE11D*
0.39µF(394)
±10%(K)
GMD155R61A394KE11D*
0.47µF(474)
±10%(K)
GMD155R61A474KE11D*
1.0µF(105)
±10%(K)
GMD155R60J105KE11D*
The part number code is shown in ( ) and Unit is shown in [ ].
< >: EIA [inch] Code
*: Please refer to GMD series Specifications and Test Method(2).
8
131
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GMD Series Specifications and Test Methods (1)
In case Non "*" is added in PNs table, please refer to GMD Series Specifications and Test Methods (1).
In case "*" is added in PNs table, please refer to GMD Series Specifications and Test Methods (2).
No.
1
Item
Operating
Temperature
Range
Specifications
Test Method
R7 : –55°C to 125°C
Reference Temperature : 25°C
2
Rated Voltage
See the previous pages.
The rated voltage is defined as the maximum voltage which
may be applied continuously to the capacitor.
When AC voltage is superimposed on DC voltage, VP-P or VO-P,
whichever is larger, should be maintained within the rated voltage range.
3
Appearance
No defects or abnormalities.
Visual inspection.
4
Dimensions
Within the specified dimensions.
Using calipers.
5
Dielectric Strength
No defects or abnormality.
No failure should be observed when 250% of the rated voltage
is applied between the terminations for 1 to 5 seconds, provided the charge/discharge current is less than 50mA.
6
Insulation
Resistance
More than 10,000MΩ or 500Ω · F
(Whichever is smaller)
The insulation resistance should be measured with a DC
voltage not exceeding the rated voltage at normal temperature
and humidity and within 2 minutes of charging.
7
Capacitance
Within the specified tolerance.
8
Dissipation
Factor (D.F.)
R7 :
W.V. 25Vmin. : 0.025 max.
W.V. 16/10V : 0.035 max.
8
The capacitance/D.F. should be measured at reference
temperature at the frequency and voltage shown in the table.
Frequency
Voltage
1±0.1kHz
1±0.2Vrms
The capacitance change should be measured after 5min. at
each specified temp. stage.
The ranges of capacitance change compared with the
Reference Temperature value over the temperature ranges
shown in the table should be within the specified ranges.*
9
Capacitance
Temperature
Characteristics
No bias
R7 : Within ±15% (–55°C to +125°C)
Step
1
2
3
4
Temperature (°C)
25±2
–55±3
25±2
125±3
*Initial measurement for high dielectric constant type
Perform a heat treatment at 150 +0/–10°C for one hour and
then let sit for 24±2 hours at room temperature.
Perform the initial measurement.
10
Bond
Pull force : 0.03N min.
Strength
MIL-STD-883 Method 2011 Condition D
Mount the capacitor on a gold metallized alumina substrate with
Au-Sn (80/20) and bond a 25mm (0.001 inch) gold wire to the
capacitor terminal using an ultrasonic ball bond. Then, pull wire.
Die Shear
Die Shear force : 2N min.
Strength
MIL-STD-883 Method 2019
Mount the capacitor on a gold metallized alumina substrate
with Au-Sn (80/20). Apply the force parallel to the substrate.
Mechanical
Strength
Appearance No defects or abnormalities.
Vibration
11
Resistance
Capacitance Within the specified tolerance.
D.F.
R7 :
W.V. 25Vmin. : 0.025 max.
W.V. 16/10V : 0.035 max.
Appearance No defects or abnormalities.
Capacitance
R7 : Within ±7.5%
Change
12
Temperature
Cycle
D.F.
R7 :
W.V. 25Vmin. : 0.025 max.
W.V. 16/10V : 0.035 max.
I.R.
More than 10,000MΩ or 500Ω · F
(Whichever is smaller)
Dielectric
Strength
No defects
Ramp frequency from 10 to 55Hz then return to 10Hz all within
1 minute. Amplitude : 1.5 mm (0.06 inch) max. total excursion.
Apply this motion for a period of 2 hours in each of 3 mutually
perpendicular directions (total 6 hours).
The capacitor should be set for 24±2 hours at room
temperature after one hour heat of treatment at 150+0/–10°C,
then measure for the initial measurement. Fix the capacitor to
the supporting jig in the same manner and under the same
conditions as (11) and conduct the five cycles according to the
temperatures and time shown in the following table. Set it for
24±2 hours at room temperature, then measure.
Step
1
Min.
Temp. (°C) Operating
Temp.+0/–3
Time (min.)
30+/–3
2
Room
Temp.
2 to 3
3
Max.
Operating
Temp. +3/–0
30+/–3
4
Room
Temp.
2 to 3
Mounting for testing : The capacitors should be mounted on the substrate as shown below using die bonding. when tests No.11 to 15 are performed.
Continued on the following page.
132
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GMD Series Specifications and Test
Methods
(1)
GMD
Series Specifications
and Test Methods (1)
Continued from the preceding page.
No.
Item
In case Non "*" is added in PNs table, please refer to GMD Series Specifications and Test Methods (1).
In case "*" is added in PNs table, please refer to GMD Series Specifications and Test Methods (2).
Specifications
Test Method
Appearance No defects or abnormalities.
Capacitance
R7 : Within ±12.5%
Change
13
Humidity
(Steady State) D.F.
I.R.
Set the capacitor for 500±12 hours at 40±2°C, in 90 to 95%
humidity.
Take it out and set it for 24±2 hours at room temperature, then
measure.
R7 :
W.V. 25Vmin. : 0.05 max.
W.V. 16/10V : 0.05 max.
More than 1,000MΩ or 50Ω · F
(Whichever is smaller)
Appearance No defects or abnormalities.
Capacitance
R7 : Within ±12.5%
Change
14
Humidity
Load
D.F.
I.R.
Apply the rated voltage for 500±12 hours at 40±2°C, in 90 to
95% humidity and set it for 24±2 hours at room temperature,
then measure. The charge/discharge current is less than
50mA.
R7 :
W.V. 25Vmin. : 0.05 max.
W.V. 16/10V : 0.05 max.
More than 500MΩ or 25Ω · F
(Whichever is smaller)
Appearance No defects or abnormalities.
A voltage treatment should be given to the capacitor, in which a
DC voltage of 200% the rated voltage is applied for one hour at
the maximum operating temperature ±3°C then it should be set
for 24±2 hours at room temperature and the initial measurement
should be conducted.
Then apply the above mentioned voltage continuously for
1000±12 hours at the same temperature, remove it from the
bath, and set it for 24±2 hours at room temperature, then
measure. The charge/discharge current is less than 50mA.
Capacitance
R7 : Within ±12.5%
Change
High
15 Temperature
D.F.
Load
I.R.
R7 :
W.V. 25Vmin. : 0.05 max.
W.V. 16/10V : 0.05 max.
More than 1,000MΩ or 50Ω · F
(Whichever is smaller)
Mounting for testing : The capacitors should be mounted on the substrate as shown below using die bonding. when tests No.11 to 15 are performed.
Gold wire
Die bond
Gold wire
Capacitor
Alumina substrate
Gold land
Alumina substrate
Gold land
133
8
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GMD Series Specifications and Test Methods (2)
In case Non "*" is added in PNs table, please refer to GMD Series Specifications and Test Methods (1).
In case "*" is added in PNs table, please refer to GMD Series Specifications and Test Methods (2).
No.
1
8
Item
Operating
Temperature
Range
Specifications
Test Method
R6 : –55°C to 85°C
Reference Temperature : 25°C
2
Rated Voltage
See the previous pages.
The rated voltage is defined as the maximum voltage which
may be applied continuously to the capacitor.
When AC voltage is superimposed on DC voltage, VP-P or VO-P,
whichever is larger, should be maintained within the rated voltage range.
3
Appearance
No defects or abnormalities.
Visual inspection.
4
Dimensions
Within the specified dimensions.
Using calipers.
5
Dielectric Strength
No defects or abnormalities.
No failure should be observed when 250% of the rated voltage
is applied between the terminations for 1 to 5 seconds, provided the charge/discharge current is less than 50mA.
6
Insulation
Resistance
More than 50Ω · F
The insulation resistance should be measured with a DC
voltage not exceeding the rated voltage at normal temperature
and humidity and within 1 minutes of charging.
7
Capacitance
Within the specified tolerance.
8
Dissipation
Factor (D.F.)
R6 : 0.1 max.
The capacitance/D.F. should be measured at reference
temperature at the frequency and voltage shown in the table.
Capacitance
CV10µF (10Vmin.)*1
CV10µF (6.3Vmax.)
Frequency
1±0.1kHz
1±0.1kHz
Voltage
1.0±0.2Vrms
0.5±0.1Vrms
*1 GMD155 R6 1A 124 to 224 are applied to 0.5±0.1 Vrms.
The capacitance change should be measured after 5min. at
each specified temp. stage.
The ranges of capacitance change compared with the
Reference Temperature value over the temperature ranges
shown in the table should be within the specified ranges.*
9
Capacitance
Temperature
Characteristics
No bias
R6 : Within ±15% (–55°C to +85°C)
Step
1
2
3
4
Temperature (°C)
25±2
–55±3
25±2
85±3
*Initial measurement for high dielectric constant type
Perform a heat treatment at 150 +0/–10°C for one hour and
then let sit for 24±2 hours at room temperature.
Perform the initial measurement.
10
Bond
Pull force : 0.03N min.
Strength
MIL-STD-883 Method 2011 Condition D
Mount the capacitor on a gold metallized alumina substrate with
Au-Sn (80/20) and bond a 25µm (0.001 inch) gold wire to the
capacitor terminal using an ultrasonic ball bond. Then, pull wire.
Die Shear
Die Shear force : 2N min.
Strength
MIL-STD-883 Method 2019
Mount the capacitor on a gold metallized alumina substrate
with Au-Sn (80/20). Apply the force parallel to the substrate.
Mechanical
Strength
Appearance No defects or abnormalities.
Vibration
11
Resistance
Capacitance Within the specified tolerance.
D.F.
R6 : 0.1 max.
Appearance No defects or abnormalities.
Capacitance
R6 : Within ±7.5%
Change
D.F.
Temperature
I.R.
12 Sudden
Change
Dielectric
Strength
R6 : 0.1 max.
More than 50Ω · F
Ramp frequency from 10 to 55Hz then return to 10Hz all within
1 minute. Amplitude : 1.5 mm (0.06 inch) max. total excursion.
Apply this motion for a period of 2 hours in each of 3 mutually
perpendicular directions (total 6 hours).
The capacitor should be set for 24±2 hours at room
temperature after one hour heat of treatment at 150+0/–10°C,
then measure for the initial measurement. Fix the capacitor to
the supporting jig in the same manner and under the same
conditions as (11) and conduct the five cycles according to the
temperatures and time shown in the following table. Set it for
24±2 hours at room temperature, then measure.
Step
No defects
1
Min.
Temp. (°C) Operating
Temp.+0/–3
Time (min.)
30±3
2
Room
Temp.
2 to 3
3
Max.
Operating
Temp. +3/–0
30±3
4
Room
Temp.
2 to 3
Mounting for testing : The capacitors should be mounted on the substrate as shown below using die bonding. when tests No.11 to 14 are performed.
Continued on the following page.
134
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GMD Series Specifications and Test
Methods
(2)
GMD
Series Specifications
and Test Methods (2)
Continued from the preceding page.
No.
Item
In case Non "*" is added in PNs table, please refer to GMD Series Specifications and Test Methods (1).
In case "*" is added in PNs table, please refer to GMD Series Specifications and Test Methods (2).
Specifications
Test Method
Appearance No defects or abnormalities.
Apply the rated voltage for 500±12 hours at 40±2°C, in 90 to
95% humidity and set it for 24±2 hours at room temperature,
then measure. The charge/discharge current is less than
50mA.
Capacitance
R6 : Within ±12.5%
Change
High
Temperature
13 High
Humidity
(Steady)
D.F.
R6 : 0.2 max.
• Initial measurement
Perform a heat treatment at 150+0/–10°C for one hour and then
let sit for 24±2 hours at room temperature. Perform the initial
measurement.
I.R.
More than 12.5Ω · F
• Measurement after test
Perform a heat treatment at 150+0/–10°C for one hour and then
let sit for 24±2 hours at room temperature, then measure.
Apply 150%*2 of the rated voltage for 1000±12 hours at the
maximum operating temperature ±3°C. Let sit for 24±2 hours at
room temperature, then measure.
The charge/ discharge current is less than 50mA.
Appearance No defects or abnormalities.
Capacitance
R6 : Within ±12.5%
Change
D.F.
R6 : 0.2 max.
*2 GMD155 R6 1A 274 to 474 are applied to 120%.
• Initial measurement
Perform a heat treatment at 150+0/–10°C for one hour and then
let sit for 24±2 hours at room temperature. Perform the initial
measurement.
14 Durability
I.R.
More than 25Ω · F
• Measurement after test
Perform a heat treatment at 150+0/–10°C for one hour and then
let sit for 24±2 hours at room temperature, then measure.
Mounting for testing : The capacitors should be mounted on the substrate as shown below using die bonding. when tests No.11 to 14 are performed.
Gold wire
Die bond
Gold wire
Capacitor
Alumina substrate
Gold land
Alumina substrate
Gold land
135
8
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Package
■ Minimum Quantity Guide
Part Number
Dimensions (mm)
L
W
T
Packaging Code
GRM02
GRM03
0.4
0.6
0.2
0.3
GRM15
1.0
0.5
GRM18
1.6
0.8
GRM21
2.0
1.25
GRM31
3.2
1.6
GRM32
3.2
2.5
For General
Purpose
0.2
0.3
0.25/0.3
0.5
0.5
0.8
0.6
0.85
1.0/1.25
0.6/0.85
1.15
1.6
0.85
1.15
1.35
1.6
1.8/2.0
2.5
8
1.15
High Power Type
High Frequency
Microchip
Array
Low ESL
1)
2)
3)
4)
GRM43
4.5
3.2
GRM55
5.7
5.0
GJM03
GJM15
GQM18
GQM21
ERB18
ERB21
ERB32
GMA0D
GMA05
GMA08
GMD03
GMD15
GNM0M
GNM1M
GNM21
0.6
1.0
1.6
2.0
1.6
2.0
3.2
0.38
0.5
0.8
0.6
1.0
0.9
1.37
2.0
0.3
0.5
0.8
1.25
0.8
1.25
2.5
0.38
0.5
0.8
0.3
0.5
0.6
1.0
1.25
GNM31
3.2
1.6
LLL15
LLL18
0.5
0.8
1.0
1.6
LLL21
1.25
2.0
LLL31
1.6
3.2
LLA18
1.6
0.8
LLA21
2.0
1.25
LLA31
3.2
1.6
LLM21
LLM31
2.0
3.2
1.25
1.6
1.35/1.6
1.8/2.0
2.5
2.8
1.15
1.35/1.6
1.8/2.0
2.5
3.2
0.3
0.5
0.7/0.8
0.85
0.9 max.
1.35 max.
1.7 max.
0.3
0.35
0.5
0.3
0.5
0.45
0.5/0.6/0.8
0.5/0.6/0.85
0.8/0.85
1.0/1.15
0.3
0.5
0.5/0.6
0.85
0.5/0.7
1.15
0.5
0.5
0.85
0.5
0.85
1.15
0.5
0.5
ø180mm Reel
Paper Tape Embossed Tape
Quantity (pcs.)
ø330mm Reel
Paper Tape Embossed Tape
Bulk Case
D
L
J
K
C
20,000 1)
15,000
10,000
10,000
4,000
4,000
4,000
4,000
4,000
4,000
15,000
10,000
4,000
4,000
4,000
15,000
10,000
10,000
4,000
4,000
4,000
10,000 4)
-
40,000 1)
3,000
3,000
2,000
3,000
2,000
2,000
1,000
1,000
1,000
500
500
1,000
1,000
500
300
3,000
2,000
3,000
4,000
4,000
3,000
4,000
3,000
4,000
4,000
3,000
4,000
3,000
3,000
4,000
4,000
50,000
50,000
50,000
10,000
10,000
10,000
10,000
10,000
10,000
50,000
50,000
10,000
10,000
10,000
50,000
50,000
50,000
10,000
10,000
10,000
50,000 4)
-
10,000
10,000
6,000
10,000
8,000
6,000
4,000
5,000
4,000
2,000
1,500
5,000
4,000
2,000
1,500
10,000
8,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
50,000
15,000 2)
10,000
5,000 2)
50,000
-
Bulk Bag
Bulk : B
Tray : T
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
500
1,000
1,000
500
500
1,000
1,000
1,000
1,000
1,000
1,000
1,000
400 3)
400 3)
400 3)
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
8mm width 2mm pitch Paper Taping. 4mm width 1mm pitch Embossed Taping.
There are parts number without bulk case.
Tray
LLL15: ø180mm Reel Paper Taping Packaging Code: E, ø330mm Reel Paper Taping Packaging Code: F
Continued on the following page.
136
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Package
Continued from the preceding page.
■ Tape Carrier Packaging
(1) Dimensions of Reel
ø180mm Reel
ø330mm Reel
2.0±0.5
2.0±0.5
ø328±2.0
ø50 min.
ø50 min.
ø21.0±0.8
ø178±2.0
ø13.0±0.5
ø13.0±0.5
ø21.0±0.8
5±1.5 for 4mm wide tape
10±1.5 for 8mm wide tape
14±1.5 for 12mm wide tape
10±1.5 for 8mm wide tape
14±1.5 for 12mm wide tape
(in mm)
8
(2) Dimensions of Paper Tape
8mm width 2mm pitch Tape
4.0±0.1
4.0±0.1
8.0±0.3
B
A
A
A
B
GRM18
GQM18
ERB18
1.05±0.1
1.85±0.1
GNM1M
1.17±0.05
1.55±0.05
GRM21
(TV0.85mm)
GQM21
GNM21
1.55±0.15
1.75±0.1
Direction of Feed
Direction of Feed
Part Number
2.0±0.1
+0.1
ø1.5 -0
3.5±0.05
1.1 max.
1.75±0.1
2.0±0.05
B
2.0±0.1
3.5±0.05
4.0±0.1
+0.1
ø1.5- 0
0.4 max.
(GRM02)
0.5 max.
(GJM03/GRM03/GMD03)
0.8 max.
(GJM15/GRM15/GMD15
LLL15/GNM0M)
8.0±0.3
8mm width 4mm pitch Tape
2.3±0.15
GRM31
(TV0.85mm)
GNM31
(TV0.8mm)
2.0±0.2
3.6±0.2
GRM32
(TV0.85mm)
2.8±0.2
3.6±0.2
A*
B*
GRM02
Part Number
0.25
0.45
GJM03
GRM03
GMD03
0.37
0.67
GJM15
GRM15
GMD15
LLL15
0.65
1.15
GNM0M
0.72
1.02
*Nominal Value
(in mm)
Continued on the following page.
137
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Package
Continued from the preceding page.
(3) Dimensions of Embossed Tape
4mm width 1mm pitch Tape
A
0.5 max.
Part Number
GRM02
A*
B*
0.23
0.43
Direction of feed
2.5 max.
(3.0 max. for T=1.8/2.0mm)
(3.7 max. for TU2.5mm)
Part Number
A
B
*GRM03 is also available by 4mm width 1mm pitch Tape.
LLL18, LLA18
1.05±0.1
1.85±0.1
12mm width 8mm pitch Tape
GRM21
(TU1.0mm)
LLL21
LLA21, LLM21
1.45±0.2
2.25±0.2
ERB21
1.55±0.2
2.3±0.2
GRM31
(TU1.15mm)
LLL31
LLA31, LLM31
GNM31
(TU1.0mm)
1.9±0.2
3.5±0.2
GRM32, ERB32
(TU1.0mm)
2.8±0.2
3.5±0.2
*Nominal Value
+0.1
ø1.5 -0
1.75±0.1
5.5±0.1
8.0±0.1 2.0±0.1
4.0±0.1
B
A
Direction of feed
Part Number
0.3±0.1
12.0±0.3
8
1.75±0.1
3.5±0.05
1.8±0.02
B
A
2.0±0.1
4.0±0.1 ø1.5 -0
8.0±0.3
+0.1
0.15 to 0.4
B
1.0±0.02
ø0.8±0.04
0.2±0.1 (LLp)
0.25±0.1 (TV2.0mm)
0.3±0.1 (T=2.5mm)
4.0±0.1
4.0±0.05
1.0±0.02
8mm width 4mm pitch Tape
0.9±0.05
2.0±0.04
2.5 max.
for GRM43/55
(3.7 max. for T=2.5mm)
(4.7 max. for TU3.0mm)
A*
B*
GRM43
3.6
4.9
GRM55
5.2
6.1
*Nominal Value
(4) Taping Method
q Tapes for capacitors are wound clockwise. The
sprocket holes are to the right as the tape is pulled
toward the user.
w Part of the leader and part of the empty tape should be
attached to the end of the tape as follows.
e The top tape and base tape are not attached at the
end of the tape for a minimum of 5 pitches.
r Missing capacitors number within 0.1% of the number
per reel or 1 pc, whichever is greater, and are not
continuous.
t The top tape and bottom tape should not protrude
beyond the edges of the tape and should not cover
sprocket holes.
y Cumulative tolerance of sprocket holes, 10 pitches:
±0.3mm.
u Peeling off force: 0.1 to 0.6N* in the direction shown
below.
*GRM02
GRM03 : 0.05 to 0.5N
GJM03
GMD03
}
(in mm)
Vacant Section Chip-mounting Unit Vacant Section
Leader unit
160 min.
190 min.
Direction of Feed
210 min.
(Top Tape alone)
(in mm)
165 to
180˚
Top Tape
Base Tape
Continued on the following page.
138
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Package
Continued from the preceding page.
■ Dimensions of Bulk Case Packaging
6.8
8.8
12.0
The bulk case uses antistatic materials. Please contact
Murata for details.
31.5
36.0
1.5
2.0
3.0
110
(in mm)
8
139
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Caution
■ Storage and Operation condition
1. The performance of chip monolithic ceramic capacitors
may be affected by the storage conditions.
1-1. Store capacitors in the following conditions:
Temperature of +5°C to +40°C and a Relative
Humidity of 20% to 70%.
(1) Sunlight, dust, rapid temperature changes,
corrosive gas atmosphere or high temperature
and humidity conditions during storage may affect
the solderability and the packaging performance.
Please use product within six months of receipt.
(2) Please confirm solderability before using after
six months. Store the capacitors without opening
the original bag. Even if the storage period is
short, do not exceed the specified atmospheric
conditions.
8
140
1-2. Corrosive gas can react with the termination
(external) electrodes or lead wires of capacitors, and
result in poor solderability. Do not store the
capacitors in an atmosphere consisting of corrosive
gas (e.g., hydrogen sulfide, sulfur dioxide, chlorine,
ammonia gas, etc.).
1-3. Due to moisture condensation caused by rapid
humidity changes, or the photochemical change
caused by direct sunlight on the terminal electrodes
and/or the resin/epoxy coatings, the solderability and
electrical performance may deteriorate. Do not store
capacitors under direct sunlight or in high humidity
conditions.
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Caution
!Caution
■ Rating
1. Temperature Dependent Characteristics
1. The electrical characteristics of the capacitor can change
with temperature.
1-1. For capacitors having larger temperature
dependency, the capacitance may change with
temperature changes.
The following actions are recommended in order to
insure suitable capacitance values.
(1) Select a suitable capacitance for the operating
temperature range.
Typical Temperature Characteristics Char. R7(X7R)
Typical Temperature Characteristics Char. R6(X5R)
20
20
15
15
Capacitance Change (%)
Capacitance Change (%)
(2) The capacitance may change within the rated
temperature.
When you use a high dielectric constant type
capacitors in a circuit that needs a tight (narrow)
capacitance tolerance. Example: a time constant
circuit., please carefully consider the
characteristics of these capacitors, such as their
aging, voltage, and temperature characteristics.
And check capacitors using your actual
appliances at the intended environment and
operating conditions.
10
5
0
-5
-10
-15
-20
-75
-50
-25
0
25
50
75
100
Temperature (°C)
10
8
5
0
-5
-10
-15
-20
-75
-50
-25
0
25
50
75
100
125
150
Temperature (°C)
Typical Temperature Characteristics Char. F5(Y5V)
Capacitance Change (%)
40
20
0
-20
-40
-60
-80
-100
-50
-25
0
25
50
75
100
Temperature (°C)
2. Measurement of Capacitance
1. Measure capacitance with the voltage and the frequency
specified in the product specifications.
1-1. The output voltage of the measuring equipment may
decrease when capacitance is high occasionally.
Please confirm whether a prescribed measured
voltage is impressed to the capacitor.
1-2. The capacitance values of high dielectric constant
type capacitors change depending on the AC voltage
applied. Please consider the AC voltage
characteristics when selecting a capacitor to be used
in a AC circuit.
Continued on the following page.
141
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Caution
Continued from the preceding page.
3. Applied Voltage
1. Do not apply a voltage to the capacitor that exceeds the
rated voltage as called-out in the specifications.
1-1. Applied voltage between the terminals of a capacitor
shall be less than or equal to the rated voltage.
(1) When AC voltage is superimposed on DC voltage,
the zero-to-peak voltage shall not exceed the
rated DC voltage.
When AC voltage or pulse voltage is applied, the
peak-to-peak voltage shall not exceed the rated
DC voltage.
(2) Abnormal voltages (surge voltage, static
electricity, pulse voltage, etc.) shall not exceed
the rated DC voltage.
Typical Voltage Applied to the DC Capacitor
DC Voltage
8
E
DC Voltage+AC
E
AC Voltage
E
Pulse Voltage
0
E
0
0
0
(E: Maximum possible applied voltage.)
1-2. Influence of overvoltage
Overvoltage that is applied to the capacitor may
result in an electrical short circuit caused by the
breakdown of the internal dielectric layers .
The time duration until breakdown depends on the
applied voltage and the ambient temperature.
4. Applied Voltage and Self-heating Temperature
1. When the capacitor is used in a high-frequency voltage,
pulse voltage, application, be sure to take into account
self-heating may be caused by resistant factors of the
capacitor.
1-1. The load should be contained to the level such that
when measuring at atomospheric temperature of
25°C, the product's self-heating remains below 20°C
and surface temperature of the capacitor in the
actual circuit remains wiyhin the maximum operating
temperature.
Continued on the following page.
142
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Caution
!Caution
Continued from the preceding page.
[DC Voltage Characteristics]
Capacitance Change (%)
20
0
-20
-40
-60
-80
-100
0
1
2
3
4
5
6
7
DC Voltage (VDC)
8
[AC Voltage Characteristics]
30
Capacitance Change (%)
5. DC Voltage and AC Voltage Characteristic
1. The capacitance value of a high dielectric constant type
capacitor changes depending on the DC voltage applied.
Please consider the DC voltage characteristics when a
capacitor is selected for use in a DC circuit.
1-1. The capacitance of ceramic capacitors may change
sharply depending on the applied voltage. (See
figure)
Please confirm the following in order to secure the
capacitance.
(1) Whether the capacitance change caused by the
applied voltage is within the range allowed or not.
(2) In the DC voltage characteristics, the rate of
capacitance change becomes larger as voltage
increases. Even if the applied voltage is below
the rated voltage. When a high dielectric constant
type capacitor is in a circuit that needs a tight
(narrow) capacitance tolerance. Example: a time
constant circuit., please carefully consider the
characteristics of these capacitors, such as their
aging, voltage, and temperature characteristics.
And check capacitors using your actual
appliances at the intended environment and
operating conditions.
2. The capacitance values of high dielectric constant type
capacitors change depending on the AC voltage
applied.
Please consider the AC voltage characteristics when
selecting a capacitor to be used in a AC circuit.
20
10
0
-10
-20
-30
-40
-50
-60
0.0
0.5
1.0
1.5
2.0
2.5
AC Voltage (Vr.m.s.)
20
Capacitor Change (%)
6. Capacitance Aging
1. The high dielectric constant type capacitors have the
characteristic in which the capacitance value decreases
with passage of time.
When you use a high dielectric constant type capacitors
in a circuit that needs a tight (narrow) capacitance
tolerance. Example: a time constant circuit., please
carefully consider the characteristics of these capacitors,
such as their aging, voltage, and temperature
characteristics. And check capacitors using your actual
appliances at the intended environment and operating
conditions.
10
0
-10
-20
5C
-30
R∆
-40
10
100
1000
10000
Time (Hr)
Continued on the following page.
143
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Caution
Continued from the preceding page.
7. Vibration and Shock
1. The capacitors mechanical actress (vibration and shock)
shall be specified for the use environment.
Please confirm the kind of vibration and/or shock, its
condition, and any generation of resonance.
Please mount the capacitor so as not to generate
resonance, and do not allow any impact on the terminals.
2. Mechanical shock due to falling may cause damage or a
crack in the dielectric material of the capacitor.
Do not use a fallen capacitor because the quality and
reliability may be deteriorated.
3. When printed circuit boards are piled up or handled, the
corners of another printed circuit board should not be
allowed to hit the capacitor in order to avoid a crack or
other damage to the capacitor.
8
144
Crack
Floor
Mounting printed circuit board
Crack
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Caution
!Caution
■ Soldering and Mounting
1. Mounting Position
1. Confirm the best mounting position and direction that
minimizes the stress imposed on the capacitor during
flexing or bending the printed circuit board.
1-1. Choose a mounting position that minimizes the
stress imposed on the chip during flexing or bending
of the board.
[Component Direction]
Locate chip
horizontal to the
direction in
which stress
acts.
[Chip Mounting Close to Board Separation Point]
Perforation
A
C
Chip arrangement
Worst A-C-(B~D) Best
B
D
Slit
2. Information before Mounting
1. Do not re-use capacitors that were removed from the
equipment.
2. Confirm capacitance characteristics under actual applied
voltage.
3. Confirm the mechanical stress under actual process and
equipment use.
4. Confirm the rated capacitance, rated voltage and other
electrical characteristics before assembly.
5. Prior to use, confirm the Solderability for the capacitors
that were in long-term storage.
6. Prior to measuring capacitance, carry out a heat
treatment for capacitors that were in long-term storage.
7. The use of Sn-Zn based solder will deteriorate the
reliability of the MLCC.
Please contact our sales representative or product
engineers on the use of Sn-Zn based solder in advance.
3. Maintenance of the Mounting (pick and place) Machine
1. Make sure that the following excessive forces are not
applied to the capacitors.
1-1. In mounting the capacitors on the printed circuit
board, any bending force against them shall be kept
to a minimum to prevent them from any bending
damage or cracking. Please take into account the
following precautions and recommendations for use
in your process.
(1) Adjust the lowest position of the pickup nozzle so
as not to bend the printed circuit board.
(2) Adjust the nozzle pressure within a static load of
1N to 3N during mounting.
2. Dirt particles and dust accumulated between the suction
nozzle and the cylinder inner wall prevent the nozzle from
moving smoothly. This imposes greater force upon the
chip during mounting, causing cracked chips. Also the
locating claw, when worn out, imposes uneven forces on
the chip when positioning, causing cracked chips. The
suction nozzle and the locating claw must be maintained,
checked and replaced periodically.
[Incorrect]
Suction Nozzle
Deflection
Board
Board Guide
[Correct]
Support Pin
Continued on the following page.
145
8
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Caution
Continued from the preceding page.
4-1. Reflow Soldering
[Standard Conditions for Reflow Soldering]
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
Infrared Reflow
Temperature (D)
Soldering
Peak Temperature
Gradual
Cooling
200°C
∆T
170°C
150°C
130°C
Preheating
Time
60-120 seconds 30-60 seconds
Vapor Reflow
Temperature (D)
Soldering
Peak Temperature
Gradual
Cooling
∆T
170°C
150°C
130°C
Table 1
Part Number
Temperature Differential
Preheating
GRM02/03/15/18/21/31
GJM03/15
∆TV190°C
LLL15/18/21/31
60-120 seconds
ERB18/21
GQM18/21
GRM32/43/55
Time
20 seconds max.
[Allowable Reflow Soldering Temperature and Time]
LLA18/21/31
∆TV130°C
LLM21/31
GNM
ERB32
Recommended Conditions
Pb-Sn Solder
Infrared Reflow Vapor Reflow
Lead Free Solder
Peak Temperature
230 to 250°C
230 to 240°C
240 to 260°C
Atmosphere
Air
Air
Air or N2
Soldering Temperature (D)
8
1. When sudden heat is applied to the components, the
mechanical strength of the components will decrease
because a sudden temperature change causes
deformation inside the components. In order to prevent
mechanical damage to the components, preheating is
required for both the components and the PCB board.
Preheating conditions are shown in table 1. It is required to
keep the temperature differential between the solder and
the components surface (∆T) as small as possible.
2. Solderability of Tin plating termination chips might be
deteriorated when a low temperature soldering profile
where the peak solder temperature is below the melting
point of Tin is used. Please confirm the Solderability of Tin
plated termination chips before use.
3. When components are immersed in solvent after mounting,
be sure to maintain the temperature difference (∆T)
between the component and the solvent within the range
shown in the table 1.
280
270
260
250
240
230
220
0
30
60
90
120
Soldering Time (sec.)
In case of repeated soldering, the accumulated
soldering time must be within the range shown above.
Pb-Sn Solder: Sn-37Pb
Lead Free Solder: Sn-3.0Ag-0.5Cu
4. Optimum Solder Amount for Reflow Soldering
4-1. Overly thick application of solder paste results in a
excessive solder fillet height.
This makes the chip more susceptible to mechanical
and thermal stress on the board and may cause the
chips to crack.
4-2. Too little solder paste results in a lack of adhesive
strength on the outer electrode, which may result in
chips breaking loose from the PCB.
4-3. Make sure the solder has been applied smoothly to
the end surface to a height of 0.2mm* min.
0.2mm∗ min.
∗ GRM02/03: 1/3 of Chip Thickness min.
in section
Inverting the PCB
Make sure not to impose any abnormal mechanical shocks
to the PCB.
Continued on the following page.
146
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Caution
!Caution
Continued from the preceding page.
4-2. Flow Soldering
Table 2
Part Number
Temperature Differential
,,,,
,,,,
,,,,
,,,
,,,
[Standard Conditions for Flow Soldering]
Temperature (D)
Soldering
Soldering
Peak
Temperature
Gradual
Cooling
∆T
Preheating
Peak
Temperature
Preheating
30-90 seconds
Time
5 seconds max.
[Allowable Flow Soldering Temperature and Time]
Soldering Temperature (D)
1. When sudden heat is applied to the components, the
mechanical strength of the components will decrease
because a sudden temperature change causes
deformation inside the components. In order to prevent
mechanical damage in the components, preheating
should be required for both of the components and the
PCB board.
Preheating conditions are shown in table 2. It is required
to keep temperature differential between the solder and
the components surface (∆T) as small as possible.
2. Excessively long soldering time or high soldering
temperature can result in leaching of the outer electrodes,
causing poor adhesion or a reduction in capacitance
value due to loss of contact between electrodes and end
termination.
3. When components are immersed in solvent after
mounting, be sure to maintain the temperature difference
(∆T) between the component and solvent within the range
shown in the table 2.
4. Do not apply flow soldering to chips not listed in table 2.
280
270
260
250
8
240
230
220
0
10
20
30
40
Soldering Time (sec.)
In case of repeated soldering, the accumulated
soldering time must be within the range shown above.
GRM18/21/31
LLL21/31
∆TV150°C
ERB18/21
GQM18/21
Recommended Conditions
Pb-Sn Solder
Lead Free Solder
Preheating Peak Temperature
90 to 110°C
100 to 120°C
Soldering Peak Temperature
240 to 250°C
250 to 260°C
Atmosphere
Air
N2
Pb-Sn Solder: Sn-37Pb
Lead Free Solder: Sn-3.0Ag-0.5Cu
5. Optimum Solder Amount for Flow Soldering
5-1. The top of the solder fillet should be lower than the
thickness of components. If the solder amount is
excessive, the risk of cracking is higher during board
bending or any other stressful condition.
Up to Chip Thickness
Adhesive
in section
Continued on the following page.
147
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Caution
Continued from the preceding page.
4-3. Correction with a Soldering Iron
8
1. When sudden heat is applied to the components when
using a soldering iron, the mechanical strength of the
components will decrease because the extreme
temperature change can cause deformations inside the
components. In order to prevent mechanical damage to
the components, preheating is required for both the
components and the PCB board. Preheating conditions,
(The "Temperature of the Soldering Iron Tip", "Preheating
Temperature", "Temperature Differential" between the
iron tip and the components and the PCB), should be
within the conditions of table 3. It is required to keep the
temperature differential between the soldering iron and
the component surfaces (∆T) as small as possible.
2. After soldering, do not allow the component/PCB to
rapidly cool down.
3. The operating time for the re-working should be as short
as possible. When re-working time is too long, it may
cause solder leaching, and that will cause a reduction in
the adhesive strength of the terminations.
4. Optimum Solder amount when re-working with a
Soldering lron
4-1. In case of sizes smaller than 0603, (GRM03/15/18,
GJM03/15, GQM18, ERB18), the top of the solder
fillet should be lower than 2/3's of the thickness of the
component or 0.5mm whichever is smaller. In case of
0805 and larger sizes, (GRM21/31/32/43/55, GQM21,
ERB21/32), the top of the solder fillet should be lower
than 2/3's of the thickness of the component. If the
solder amount is excessive, the risk of cracking is
higher during board bending or under any other
stressful condition.
4-2. A soldering iron with a tip of ø3mm or smaller should
be used. It is also necessary to keep the soldering
iron from touching the components during the
re-work.
4-3. Solder wire with ø0.5mm or smaller is required for
soldering.
Table 3
Part Number
Temperature Preheating Temperature
of Soldering
Differential Atmosphere
Iron Tip Temperature
(∆T)
GRM03/15/18/21/31
GJM03/15
GQM18/21
350°C max. 150°C min. ∆TV190°C
Air
280°C max. 150°C min. ∆TV130°C
Air
ERB18/21
GRM32/43/55
ERB32
*Applicable for both Pb-Sn and Lead Free Solder.
Pb-Sn Solder: Sn-37Pb
Lead Free Solder: Sn-3.0Ag-0.5Cu
Solder Amount
in section
4-4. Leaded Component Insertion
1. If the PCB is flexed when leaded components (such as
transformers and ICs) are being mounted, chips may
crack and solder joints may break.
Before mounting leaded components, support the PCB
using backup pins or special jigs to prevent warping.
5. Washing
Excessive ultrasonic oscillation during cleaning can cause
the PCBs to resonate, resulting in cracked chips or broken
solder joints. Take note not to vibrate PCBs.
Continued on the following page.
148
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Caution
!Caution
Continued from the preceding page.
6. Electrical Test on Printed Circuit Board
1. Confirm position of the support pin or specific jig, when
inspecting the electrical performance of a capacitor after
mounting on the printed circuit board.
1-1. Avoid bending printed circuit board by the pressure
of a test pin, etc.
The thrusting force of the test probe can flex the PCB,
resulting in cracked chips or open solder joints.
Provide support pins on the back side of the PCB to
prevent warping or flexing.
1-2. Avoid vibration of the board by shock when a test pin
contacts a printed circuit board.
[Not Recommended]
Peeling
Test-pin
[Recommended]
Support Pin
Test-pin
7. Printed Circuit Board Cropping
1. After mounting a capacitor on a printed circuit board, do
not apply any stress to the capacitor that is caused by
bending or twisting the board.
1-1. In cropping the board, the stress as shown right may
cause the capacitor to crack.
Try not to apply this type of stress to a capacitor.
8
[Bending]
[Twisting]
2. Check of the cropping method for the printed circuit
board in advance.
2-1. Printed circuit board cropping shall be carried out by
using a jig or an apparatus to prevent the mechanical
stress which can occur to the board.
(1) Example of a suitable jig
Recommended example: the board should be
pushed as close to the near the cropping jig as
possible and from the back side of board in order
to minimize the compressive stress applied to
capacitor.
Not recommended example* when the board is
pushed at a point far from the cropping jig and
from the front side of board as below, the
capacitor may form a crack caused by the tensile
stress applied to capacitor.
[Outline of Jig]
Printed Circuit Board
Boad Cropping Jig
Recommended
Direction of Load
Printed Circuit Board
V-groove
Not recommended
Direction of Load
Load Point
Components
Load Point
Printed Circuit Board
Components
Continued on the following page.
149
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Caution
Continued from the preceding page.
(2) Example of a suitable machine
An outline of a printed circuit board cropping
machine is shown as follows. Along the lines with
the V-grooves on printed circuit board, the top
and bottom blades are aligned to one another
when cropping the board.
The misalignment of the position between top and
bottom blades may cause the capacitor to crack.
[Outline of Machine]
Top Blade
Printed Circuit Board
Top Blade
[Principle of Operation]
Bottom Blade
V-groove
[Cross-section Diagram]
Printed Circuit Board
V-groove
8
Recommended
150
Not Recommended
Top-bottom Misalignment
Left-right Misalignment
Front-rear Misalignment
Top Blade
Top Blade
Top Blade
Top Blade
Bottom Blade
Bottom Blade
Bottom Blade
Bottom Blade
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Caution
!Caution
■ Others
1. Under Operation of Equipment
1-1. Do not touch a capacitor directly with bare hands
during operation in order to avoid the danger of a
electric shock.
1-2. Do not allow the terminals of a capacitor to come in
contact with any conductive objects (short-circuit).
Do not expose a capacitor to a conductive liquid,
inducing any acid or alkali solutions.
1-3. Confirm the environment in which the equipment will
operation is under the specified conditions.
Do not use the equipment under the following
environment.
(1) Being spattered with water or oil.
(2) Being exposed to direct sunlight.
(3) Being exposed to Ozone, ultraviolet rays or
radiation.
(4) Being exposed to toxic gas (e.g., hydrogen sulfide,
sulfur dioxide, chlorine, ammonia gas, etc.)
(5) Any vibrations or mechanical shocks exceeding
the specified limits.
(6) Moisture condensing environments.
1-4. Use damp proof countermeasures if using under any
conditions that can cause condensation.
2. Others
2-1. In an Emergency
(1) If the equipment should generate smoke, fire or
smell, immediately turn off or unplug the
equipment.
If the equipment is not turned off or unplugged,
the hazards may be worsened by supplying
continuous power.
(2) In this type of situation, do not allow face and
hands to come in contact with the capacitor or
burns may be caused by the capacitors high
temperature.
2-2. Disposal of Waste
When capacitors are disposed, they must be burned
or buried by the industrial waste vender with the
appropriate licenses.
2-3. Circuit Design
GRM, GCM, GMA/D, LLL/A/M, ERB, GQM, GJM,
GNM Series capacitors in this catalog are not safety
recognized products.
2-4. Remarks
Failure to follow the cautions may result, worst case,
in a short circuit and smoking when the product is
used.
The above notices are for standard applications and
conditions. Contact us when the products are used in
special mounting conditions.
Select optimum conditions for operation as they
determine the reliability of the product after assembly.
The data herein are given in typical values, not
guaranteed ratings.
151
8
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice
■ Rating
8
1. Operating Temperature
1. The operating temperature limit depends on the
capacitor.
1-1. Do not apply temperatures exceeding the upper
operating temperature.
It is necessary to select a capacitor with a suitable
rated temperature which will cover the operating
temperature range.
Also it is necessary to consider the temperature
distribution in equipment and the seasonal
temperature variable factor.
1-2. Consider the self-heating of the capacitor
The surface temperature of the capacitor shall be
the upper operating temperature or less when
including the self-heating factors.
2. Atmosphere Surroundings (gaseous and liquid)
1. Restriction on the operating environment of capacitors.
1-1. The capacitor, when used in the above, unsuitable,
operating environments may deteriorate due to
the corrosion of the terminations and the
penetration of moisture into the capacitor.
152
1-2. The same phenomenon as the above may occur
when the electrodes or terminals of the capacitor
are subject to moisture condensation.
1-3. The deterioration of characteristics and insulation
resistance due to the oxidization or corrosion of
terminal electrodes may result in breakdown when
the capacitor is exposed to corrosive or volatile
gases or solvents for long periods of time.
3. Piezo-electric Phenomenon
1. When using high dielectric constant type capacitors in
AC or pulse circuits, the capacitor itself vibrates at
specific frequencies and noise may be generated.
Moreover, when the mechanical vibration or shock is
added to capacitor, noise may occur.
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice
Notice
■ Soldering and Mounting
1. PCB Design
1. Notice for Pattern Forms
1-1. Unlike leaded components, chip components are
susceptible to flexing stresses since they are
mounted directly on the substrate.
They are also more sensitive to mechanical and
thermal stresses than leaded components.
Excess solder fillet height can multiply these stresses
and cause chip cracking. When designing substrates,
take land patterns and dimensions into consideration
to eliminate the possibility of excess solder fillet
height.
1-2. It is possible for the chip to crack by the expansion
and shrinkage of a metal board. Please contact us if
you want to use our ceramic capacitors on a metal
board such as Aluminum.
Pattern Forms
Prohibited
8
Correct
Chassis
Solder (ground)
Solder Resist
Placing Close to Chassis
Electrode Pattern
Lead Wire
Solder Resist
Placing
of Chip Components
and Leaded Components
Soldering Iron
Lead Wire
Placing
of Leaded Components
after Chip Component
Solder Resist
Solder Resist
Lateral Mounting
Continued on the following page.
153
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice
Continued from the preceding page.
2. Land Dimensions
2-1. Chip capacitor can be cracked due to the stress of
PCB bending / etc if the land area is larger than
needed and has an excess amount of solder.
Please refer to the land dimensions in table 1 for flow
soldering, table 2 for reflow soldering, table 3 for
GNM & LLA, and table 4 for LLM.
Please confirm the suitable land dimension by
evaluating of the actual SET / PCB.
Chip Capacitor
Land
c
b
a
Solder Resist
Table 1 Flow Soldering Method
Dimensions
Chip (LgW)
a
b
c
GRM18
GQM18
1.6g0.8
0.6 to 1.0
0.8 to 0.9
0.6 to 0.8
GRM21
GQM21
2.0g1.25
1.0 to 1.2
0.9 to 1.0
0.8 to 1.1
GRM31
3.2g1.6
2.2 to 2.6
1.0 to 1.1
1.0 to 1.4
LLL21
1.25g2.0
0.4 to 0.7
0.5 to 0.7
1.4 to 1.8
LLL31
1.6g3.2
0.6 to 1.0
0.8 to 0.9
2.6 to 2.8
ERB11
1.25g1.0
0.4 to 0.6
0.6 to 0.8
0.8 to 1.0
ERB21
2.0g1.25
1.0 to 1.2
0.9 to 1.0
0.8 to 1.0
ERF1D
1.4g1.4
0.5 to 0.8
0.8 to 0.9
1.0 to 1.2
Part Number
8
(in mm)
Table 2 Reflow Soldering Method
Dimensions
Chip (LgW)
a
b
c
GRM02
0.4g0.2
0.16 to 0.2
0.12 to 0.18
0.2 to 0.23
GRM03
GJM03
0.6g0.3
0.2 to 0.3
0.2 to 0.35
0.2 to 0.4
GRM15
GJM15
1.0g0.5
0.3 to 0.5
0.35 to 0.45
0.4 to 0.6
GRM18
GQM18
1.6g0.8
0.6 to 0.8
0.6 to 0.7
0.6 to 0.8
GRM21
GQM21
2.0g1.25
1.0 to 1.2
0.6 to 0.7
0.8 to 1.1
GRM31
3.2g1.6
2.2 to 2.4
0.8 to 0.9
1.0 to 1.4
GRM32
3.2g2.5
2.0 to 2.4
1.0 to 1.2
1.8 to 2.3
GRM43
4.5g3.2
3.0 to 3.5
1.2 to 1.4
2.3 to 3.0
GRM55
5.7g5.0
4.0 to 4.6
1.4 to 1.6
3.5 to 4.8
LLL15
0.5g1.0
0.15 to 0.2
0.2 to 0.25
0.7 to 1.0
LLL18
0.8g1.6
0.2 to 0.3
0.3 to 0.4
1.4 to 1.6
LLL21
1.25g2.0
0.4 to 0.6
0.4 to 0.5
1.4 to 1.8
LLL31
1.6g3.2
0.6 to 0.8
0.6 to 0.7
2.6 to 2.8
ERB11
1.25g1.0
0.4 to 0.6
0.6 to 0.8
0.8 to 1.0
ERB21
2.0g1.25
1.0 to 1.2
0.6 to 0.8
0.8 to 1.0
ERB32
3.2g2.5
2.2 to 2.5
0.8 to 1.0
1.9 to 2.3
Part Number
ERF1D
1.4g1.4
0.4 to 0.8
0.6 to 0.8
1.0 to 1.2
ERF22
2.8g2.8
1.8 to 2.1
0.7 to 0.9
2.2 to 2.6
(in mm)
Continued on the following page.
154
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice
Notice
Continued from the preceding page.
GNMpp2
GNMpp4
LLA
Chip Capacitor
Chip Capacitor
a
a
b
b
c
Land
p
c
Land
p
Table 3 GNM, LLA Series for Reflow Soldering Land Dimensions
Dimensions (mm)
Part Number
L
W
a
b
c
p
GNM0M2
0.9
0.6
0.12 to 0.20*
0.35 to 0.40*
0.3
0.45
GNM1M2
1.37
1.0
0.4 to 0.5
0.35 to 0.45
0.3 to 0.35
0.64
GNM212
2.0
1.25
0.6 to 0.7
0.5 to 0.7
0.4 to 0.5
1.0
GNM214
2.0
1.25
0.6 to 0.7
0.5 to 0.7
0.25 to 0.35
0.5
GNM314
3.2
1.6
0.8 to 1.0
0.7 to 0.9
0.3 to 0.4
0.8
LLA18
1.6
0.8
0.3 to 0.4
0.25 to 0.35
0.15 to 0.25
0.4
0.2 to 0.3
0.5
0.3 to 0.4
0.8
e
f
p
LLA21
2.0
1.25
0.5 to 0.7
0.35 to 0.6
LLA31
3.2
1.6
0.7 to 0.9
0.4 to 0.7
8
* 0.82Va+2bV1.00
p
LLM
c
b
e
a
Chip Capacitor
c'
b'
f
d
Table 4 LLM Series for Reflow Soldering Land Dimensions
Dimensions (mm)
Part Number
a
b, b'
c, c'
d
LLM21
0.6 to 0.8
(0.3 to 0.5)
0.3
2.0 to 2.6
1.3 to 1.8
1.4 to 1.6
0.5
LLM31
1.0
(0.3 to 0.5)
0.4
3.2 to 3.6
1.6 to 2.0
2.6
0.8
b=(c-e)/2, b'=(d-f)/2
2. Adhesive Application
1. Thin or insufficient adhesive can cause the chips to
loosen or become disconnected during flow soldering.
The amount of adhesive must be more than dimension c,
shown in the drawing at right, to obtain the correct
bonding strength.
The chip's electrode thickness and land thickness must
also be taken into consideration.
2. Low viscosity adhesive can cause chips to slip after
mounting. The adhesive must have a viscosity of
5000Pa • s (500ps) min. (at 25°C).
3. Adhesive Coverage
Part Number
GRM18, GQM18
Chip Capacitor
a=20 to 70µm
b=30 to 35µm
c=50 to 105µm
a
c
Board
Adhesive
Land
b
Adhesive Coverage*
0.05mg min.
GRM21, LLL21, GQM21
0.1mg min.
GRM31, LLL31
0.15mg min.
*Nominal Value
Continued on the following page.
155
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice
Continued from the preceding page.
3. Adhesive Curing
1. Insufficient curing of the adhesive can cause chips to
disconnect during flow soldering and causes deterioration
in the insulation resistance between the outer electrodes
due to moisture absorption.
Control curing temperature and time in order to prevent
insufficient hardening.
4. Flux Application
1. An excessive amount of flux generates a large quantity of
flux gas, which can cause a deterioration of Solderability.
So apply flux thinly and evenly throughout. (A foaming
system is generally used for flow soldering).
2. Flux containing too a high percentage of halide may
cause corrosion of the outer electrodes unless there is
sufficient cleaning. Use flux with a halide content of 0.2%
max.
3. Do not use strong acidic flux.
4. Do not use water-soluble flux.
(*Water-soluble flux can be defined as non rosin type flux
including wash-type flux and non-wash-type flux.)
8
5. Flow Soldering
o Set temperature and time to ensure that leaching of the
outer electrode does not exceed 25% of the chip end
area as a single chip (full length of the edge A-B-C-D
shown right) and 25% of the length A-B shown below as
mounted on substrate.
[As a Single Chip]
A
B
D
Outer Electrode
C
[As Mounted on Substrate]
B
A
6. Washing
1. Please evaluate a capacitor by actual cleaning equipment
and condition surely for confirming the quality and select
the applicable solvent.
2. Unsuitable cleaning solvent may leave residual flux, other
foreign substances, causing deterioration of electrical
characteristics and the reliability of the capacitors.
3. Select the proper cleaning conditions.
3-1. Improper cleaning conditions (excessive or
insufficient) may result in the deterioration of the
performance of the capacitors.
Continued on the following page.
156
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice
Notice
Continued from the preceding page.
7. Coating
1. A crack may be caused in the capacitor due to the stress
of the thermal contraction of the resin during curing
process.
The stress is affected by the amount of resin and curing
contraction.
Select a resin with small curing contraction.
The difference in the thermal expansion coefficient
between a coating resin or a molding resin and capacitor
may cause the destruction and deterioration of the
capacitor such as a crack or peeling, and lead to the
deterioration of insulation resistance or dielectric
breakdown.
Select a resin for which the thermal expansion coefficient
is as close to that of capacitor as possible.
A silicone resin can be used as an under-coating to buffer
against the stress.
2. Select a resin that is less hygroscopic.
Using hygroscopic resins under high humidity conditions
may cause the deterioration of the insulation resistance of
a capacitor.
An epoxy resin can be used as a less hygroscopic resin.
8. Die Bonding/Wire Bonding (GMA or GMD Series)
1. Die Bonding of Capacitors
• Use the following materials for the Brazing alloys:
Au-Sn (80/20) 300 to 320 degree C in N2 atmosphere
• Mounting
(1) Control the temperature of the substrate so it
matches the temperature of the brazing alloy.
(2) Place the brazing alloy on the substrate and place
the capacitor on the alloy. Hold the capacitor and
gently apply the load. Be sure to complete the
operation within 1 minute.
2. Wire Bonding
• Wire
Gold wire: 25 micro m (0.001 inch) diameter
• Bonding
(1) Thermo compression, ultrasonic ball bonding.
(2) Required stage temperature: 150 to 200 degree C
(3) Required wedge or capillary weight: 0.2N to 0.5N
(4) Bond the capacitor and base substrate or other
devices with gold wire.
157
8
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice
■ Others
1. Transportation
1. The performance of a capacitor may be affected by the
conditions during transportation.
1-1. The capacitors shall be protected against
excessive temperature, humidity and mechanical
force during transportation.
(1) Climatic condition
• low air temperature: -40°C
• change of temperature air/air: -25°C/+25°C
• low air pressure: 30 kPa
• change of air pressure: 6 kPa/min.
(2) Mechanical condition
Transportation shall be done in such a way that
the boxes are not deformed and forces are not
directly passed on to the inner packaging.
8
158
1-2. Do not apply excessive vibration, shock, and
pressure to the capacitor.
(1) When excessive mechanical shock or pressure
is applied to a capacitor, chipping or cracking
may occur in the ceramic body of the capacitor.
(2) When a sharp edge of an air driver, a soldering
iron, tweezers, a chassis, etc. impacts strongly
on the surface of capacitor, the capacitor may
crack and short-circuit.
1-3. Do not use a capacitor to which excessive shock
was applied by dropping, etc.
The capacitor dropped accidentally during
processing may be damaged.
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Reference Data
1. Solderability
(1) Test Method
Subject the chip capacitor to the following conditions.
Then apply flux (an ethanol solution of 25% rosin) to the
chip and dip it in 230D eutectic solder for 2 seconds.
Conditions:
Expose prepared at room temperature (for 6 months and
12 months, respectively)
Prepared at high temperature (for 100 hours at 85D)
Prepared left at high humidity (for 100 hours under
90%RH to 95%RH at 40D)
(2) Test Samples
GRM21 : Products for flow/reflow soldering.
(3) Acceptance Criteria
With a 60-power optical microscope, measure the surface
area of the outer electrode that is covered with solder.
(4) Results
Refer to Table 1.
Table 1
Sample
Initial State
GRM21 for flow/reflow soldering
95 to 100%
6 months
12 months
Prepared at High
Temperature for
100 Hours at 85D
95 to 100%
95%
90 to 95%
Prepared at Room Temperature
Prepared at High Humidity
for 100 Hours at 90 to
95% RH and 40D
95%
8
2. Board Bending Strength for Solder Fillet Height
(1) Test Method
Solder the chip capacitor to the test PCB with the amount
of solder paste necessary to achieve the fillet heights.
Then bend the PCB using the method illustrated and
measure capacitance.
20 50
Capacitor
R230
Supporting
Base
45
Capacitance Meter
1.65
1.2
40
1.0
¥
S
T
¤
W
X
\
¨
©
­
VYZ[^§ª«¬¯±`¬­«©ª[\ZXY
¯°®^_]±¨§¥¤`WVTS¥¤TS®«ª¨¦§¢£]ZYWUVQR,
±` «ªZY®§¦¢]VUQ,
45
Pressurizing
Speed : 1.0mm/sec.
Pressurize
Note : The material of pressure application jig and
support is the quenched metal.
(hardness HB 183-255 or superhardness
HRA90 or more)
Flexure
4.0
100
Material : Glass Epoxy
: Copper Foil (0.35mm thick)
: Solder Resist
Solder Amount
Larger Fillet.
Fillet up to Chip
Thickness
1.6
(in mm)
(2) Test Samples
GRM21: 5C/R7/F5 Characteristics T=0.6mm
(3) Acceptance Criteria
Products should be determined to be defective if the
change in capacitance has exceeded the values specified
in Table 2.
Table 2
1 Characteristics
Change in Capacitance
5C
Within T5% or T0.5pF, whichever is greater
R7
Within T12.5%
F5
Within T20%
Continued on the following page.
159
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Reference Data
Continued from the preceding page.
­
R
S
T
W
X
\
£
¤
¥
¨
©
S
T
X
¤
¥
©
°±¯®«¬­©¨_`^]Z[\XW
¯®ª^]Yª¦§¤£¢YUVSRQ,°±­_`\®¯ª]^Y¯ª«¬©¦§¨¤¢£^YZ[XUVWSQR
,
T
¥
±°­`_\±°®¯¬ª«§¦`_]^[YZVU
¬«§¨©¦¥£¤¢[ZVWXUTRSQ
,¢Q,
(4) Results
GRM21 5C (T=0.6)
GRM21 R7 (T=0.6)
100
80
Survival Rate (%)
Survival Rate (%)
100
Fillet up to Chip
Thickness
60
Larger Fillet
40
20
80
Fillet up to Chip
Thickness
60
40
Larger Fillet
20
0
0
0
2
4
Flexure (mm)
6
8
0
2
4
Flexure (mm)
6
8
GRM21 F5 (T=0.6)
Survival Rate (%)
100
8
80
Fillet up to Chip
Thickness
60
40
Larger Fillet
20
0
0
2
4
Flexure (mm)
6
8
3. Temperature Cycling for Solder Fillet Height
[Temperature Cycling]
+125D
Room Temperature
Time (min.)
-55D
5
30
5
30
[Solder Amount]
Substrate
Glass Epoxy
or Paper Phenol
1.3T
w
e
1.6T
0.7T
q
T
0.5T
Alumina
T
Solder Amount
(1) Test Method
Solder the chips to the substrate of various test fixtures
using sufficient amounts of solder to achieve the required
fillet height. Then subject the fixtures to the cycle
illustrated below 200 times.
q Solder Amount
Alumina substrates are typically designed for reflow
soldering.
Glass epoxy or paper phenol substrates are typically
used for flow soldering.
w Material
Alumina
(Thickness: 0.64mm)
Glass epoxy (Thickness: 1.64mm)
Paper phenol (Thickness: 1.64mm)
e Land Dimension
6Z4 Eutectic solder
Solder to be used
[Land Dimension]
1.5
Land Pattern
Alumina
Substrate
1.5
1.2
1.5
(in mm)
Glass Epoxy
Substrate
Paper Phenol
Substrate
Ag/Pd=72/28
Thickness: 10 to 12µm
Cu
Thickness: 35µm
Continued on the following page.
160
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Reference Data
Continued from the preceding page.
(2) Test Samples
GRM21 5C/R7/F5 Characteristics T=0.6mm
(3) Acceptance Criteria
Products are determined to be defective if the change in
capacitance has exceeded the values specified in Table 3.
Table 3
Characteristics
Change in Capacitance
5C
Within T2.5% or T0.25pF, whichever is greater
R7
Within T7.5%
F5
Within T20%
(4) Results
Alumina Substrate (Thickness 0.64mm)
GRM21 R7 (T=0.6)
80
60
40
20
0
0
50
e
qw
100
150
200
Number of Cycles
Accumulated Percent Defective (%)
Accumulated Percent Defective (%)
GRM21 F5 (T=0.6)
100
8
100
80
e
60
40
20
0
0
50
w
q
100
150
200
Number of Cycles
Accumulated Percent Defective (%)
GRM21 5C (T=0.6)
100
80
e
60
40
w
20
0
0
50
100
q
150
200
Number of Cycles
Glass Epoxy Substrate (Thickness 1.6mm)
GRM21 R7 (T=0.6)
80
60
40
20
0
0
e
50
qw
100
150
200
Number of Cycles
Accumulated Percent Defective (%)
Accumulated Percent Defective (%)
GRM21 F5 (T=0.6)
100
100
80
60
40
e
20
0
0
50
qw
100
150
200
Number of Cycles
Accumulated Percent Defective (%)
GRM21 5C (T=0.6)
100
80
60
40
e
20
0
0
50
100
qw
150
200
Number of Cycles
Paper Phenol Substrate (Thickness 1.6mm)
60
40
20
50
qwe
100
150
200
Number of Cycles
Accumulated Percent Defective (%)
Accumulated Percent Defective (%)
80
0
0
GRM21 R7 (T=0.6)
GRM21 F5 (T=0.6)
100
100
80
60
40
20
0
0
e
50
qw
100
150
200
Number of Cycles
Accumulated Percent Defective (%)
GRM21 5C (T=0.6)
100
80
60
40
20
0
0
50
100
e
qw
150
200
Number of Cycles
Continued on the following page.
161
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Reference Data
Continued from the preceding page.
4. Board Bending Strength for Board Material
(1) Test Method
Solder the chip to the test board. Then bend the board
using the method illustrated below, to measure
capacitance.
20
Capacitor
©\X­©Xª¦YU±`­\°¯¬_^[
¤¥£¢STRQ,­¬©§¨\[XVW
£R¢Q,¦U
Y
X
ª
©
,
R
Q
U
T
S
W
V
[
Z
]
\
^
£
¢
_
¦
¥
¤
¨
§
¬
«
®
­
¯
°
°¯_^ ¦U
R230
1.65
45
1.2
Pressurizing
Speed : 1.0mm/sec.
Pressurize
Note : Material of the pressurizing jig and
the supporting base must be hardened steel
(Hardness : HB183 to 255 or carbide Hardness
: HRA90 min.)
Flexure
Capacitance Meter
40
1.0
45
Supporting
Base
50
4.0
Solder Amount
Up to Chip
Thickness
1.6
100
: Copper Foil (0.035mm thick)
: Solder Resist
(in mm)
8
(2) Test Samples
GRM21 5C/R7/F5 Characteristics T=0.6mm typical
(3) Acceptance Criteria
Products should be determined to be defective if the
change in capacitance has exceeded the values specified
in Table 4.
Table 4
Characteristics
Change in Capacitance
5C
Within T5% or T0.5pF, whichever is greater
R7
Within T12.5%
F5
Within T20%
¥
S
T
¤
T
¥
,
Q
R
S
T
U
V
W
Y
X
Z
[
\
^
_
¢
`
£
¤
¥
¦
§
¨
ª
©
«
¬
­
¯
°
±
T
W
X
Z
[
\
_
`
¥
¨
©
«
¬
­
°
±
,
Q
R
U
¢
£
¦
±°¯­¬`_^\[
®]®«ª¨§¦£¢]ZYWVURQ,¯®^]°¯®­¬«©ª¨§¦¤£¢_^]\[ZXYWVUSRQ
,
T
¥
±°­¬«©¨¥`_\[ZXWT
±°¯®­¬«©ª¨§¦¥¤£`¢_^]\[ZXYWVUTSRQ
,§¦¤£¢VUSRQ,
°¯®«_^]Z ª¦YU
(4) Results
GRM21 R7 (T=0.6)
GRM21 5C (T=0.6)
100
100
Paper Phenol
Survival Rate (%)
Survival Rate (%)
Paper Phenol
80
60
Glass Epoxy
40
20
80
60
40
Glass Epoxy
20
0
0
0
2
4
Flexure (mm)
6
8
0
2
4
Flexure (mm)
6
8
GRM21 F5 (T=0.6)
Survival Rate (%)
100
Paper Phenol
80
60
40
Glass Epoxy
20
0
0
2
4
Flexure (mm)
6
8
Continued on the following page.
162
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Reference Data
Continued from the preceding page.
5. Break Strength
(2) Test Samples
GRM21 5C/R7/F5 Characteristics
GRM31 5C/R7/F5 Characteristics
P Pressurizing
speed : 2.5mm/sec.
Amplifier
Load cell
Storage
scope
Loading Jig End
φ1.0mm
­
T
S
X
W
\
¥
¤
©
¨
±`®¯°ª«]^_YZ¦¢£UQR,
(1) Test Method
Place the chip on a steel plate as illustrated on the right.
Increase load applied to a point near the center of the
test sample.
Sample
P0.5mm
Steel plate
(3) Acceptance Criteria
Define the load that has caused the chip to break or
crack, as the bending force.
γ
W
Chip Size L
5C
R7
F5
Charac- Charac- Characteristics teristics teristics
W
T
(4) Explanation
Break strength, P, is proportionate to the square of the
thickness of the ceramic element and is expressed as a
curve of secondary degree.
The formula is:
2γ WT2
P=
(N)
3L
W : Width of ceramic element
(mm)
T : Thickness of element
(mm)
L : Distance between fulcrums (mm)
γ : Bending stress
(N/mm2)
L
GRM21
1.5 1.2
GRM31
2.7 1.5
300
180
160
(in mm)
8
(5) Results
GRM21
GRM31
R7
F5
100
80
60
40
20
0
0
0.4
0.8
1.2
Thickness of Ceramic Element (mm)
1.6
140
5C
120
100
R7
80
40
20
0
0
0.4
0.8
1.2
Thickness of Ceramic Element (mm)
6. Thermal Shock
Dipping Speed : 25mm/sec.
¢Q,£¦RU
^
¯
®
]
\`­±UY¦ª
(1) Test method
After applying flux (an ethanol solution of 25% rosin), dip
the chip in a solder bath (6Z4 eutectic solder) in
accordance with the following
conditions:
F5
60
Temperature
5C
120
Bending-break Strength (N)
Bending-break Strength (N)
140
Chip Capacitor
1.6
Solder
Temperature
∆T
Natural
Cooling
Solder Bath
25D
(2) Test samples
GRM21 5C/R7/F5 Characteristics T=0.6mm typical
2 sec.
Time
(3) Acceptance criteria
Visually inspect the test sample with a 60-power optical
microscope. Chips exhibiting breaks or cracks should be
determined to be defective.
Continued on the following page.
163
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Reference Data
Continued from the preceding page.
(4) Results
Incidence of Cracks (%)
100
80
60
F5
40
R7
20
5C
0
200
240
280
320
360
Temperature Differential ∆T (D)
7. Solder Heat Resistance
e Dip soldering:
After dipping the test sample with a pair of tweezers in
static solder (eutectic solder), check for leaching that
may have occurred on the outer electrode.
r Flux to be used: An ethanol solution of 25% rosin.
(2) Test samples
GRM21: For flow/reflow soldering T=0.6mm
(3) Acceptance criteria
The starting time of leaching should be defined as the
time when the outer electrode has lost 25% of the total
edge length of A-B-C-D as illustrated:
A
B
D
C
Outer Electrode
(4) Results
Flow Soldering
Soldering Temperature (D)
Soldering Temperature (D)
Reflow Soldering
280
270
260
250
240
230
220
210
0
60
120
180
240
Leaching Starting Time (sec.)
280
270
260
250
240
230
220
210
0
10
20
30
40
50
60
Leaching Starting Time (sec.)
Dip Soldering
Soldering Temperature (D)
8
(1) Test Method
q Reflow soldering:
Apply about 300 µm of solder paste over the alumina
substrate. After reflow soldering, remove the chip and
check for leaching that may have occurred on the
outer electrode.
w Flow soldering:
After dipping the test sample with a pair of tweezers in
wave solder (eutectic solder), check for leaching that
may have occurred on the outer electrode.
280
270
260
250
240
230
220
210
0
10
20
30
40
50
60
Leaching Starting Time (sec.)
Continued on the following page.
164
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Reference Data
Continued from the preceding page.
8. Thermal Shock when Making Corrections with a
Soldering Iron
(1) Test Method
Apply a soldering iron meeting the conditions below to
the soldered joint of a chip that has been soldered to a
paper phenol board, while supplying wire solder. (Note:
the soldering iron tip should not directly touch the ceramic
element of the chip.)
Mounting Solder
Soldering lron
Wire Solder
Duration of
Touching :
Approx. 3 sec.
Paper Phenol Substrate
(2) Test Samples
GRM21 5C/R7/F5 Characteristics T=0.6mm
Soldering Iron
Tip Diameter
Ceramic heater 20W
φ3mm
(3) Acceptance Criteria for Defects
Observe the appearance of the test sample with a
60-power optical microscope. Those units displaying any
breaks or cracks are determined to be defective.
(4) Results
8
GRM21 R7 (T=0.6)
100
Incidence of Cracks (%)
Incidence of Cracks (%)
GRM21 5C (T=0.6)
80
60
40
20
0
200
240
280
320
Soldering Iron Tip Temperature (D)
360
100
80
60
40
20
0
200
240
280
320
Soldering Iron Tip Temperature (D)
360
Incidence of Cracks (%)
GRM21 F5 (T=0.6)
100
80
60
40
20
0
200
240
280
320
Soldering Iron Tip Temperature (D)
360
165
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Monolithic Ceramic Capacitors
Medium Voltage Low Dissipation Factor
e
g
e
■ Features
T
1. Low-loss and suitable for high frequency circuits
2. Murata's original internal electrode structure
realizes high flash-over voltage.
3. A new monolithic structure for small, surfacemountable devices capable of operating at high
voltage levels
4. Sn-plated external electrodes realize good
solderability.
5. Use the GRM21/31 type with flow or reflow soldering,
and other types with reflow soldering only.
L
Part Number
W
Dimensions (mm)
L
W
T
e min.
2.0 ±0.2 1.25 ±0.2
1.0 +0,- 0.3
3.2 ±0.2 1.6 ±0.2 1.25 +0,- 0.3
GRM21A
GRM31A
GRM31B
0.3
1.0 +0,- 0.3
GRM32A
3.2 ±0.2 2.5 ±0.2
1.25 +0,- 0.3
GRM32B
GRM42A
4.5 ±0.3 2.0 ±0.2 1.0 +0,- 0.3
* GRM31A7U3D, GRM32A7U3D, GRM32B7U3D : 1.8mm min.
g min.
0.7
1.5*
2.9
■ Applications
Ideal for use on high frequency pulse circuits such
as snubber circuits for switching power supplies,
DC-DC converters, ballasts (inverter fluorescent
lamps), etc.
9
*: In case of use C0G char., DC630V product with
pulse voltage, be sure not to use with 10kHz and
less pulse or ripple voltage condition.
and these product are not suitable for commercial
power line voltage application, such as AC filter.
For those applications, be sure to use AC voltage
rating product.(GA2/GA3 series)
C0G Characteristics
Electrode g
min.
(mm)
Electrode e
(mm)
1.0
1.5
0.3 min.
1.6
1.0
1.5
0.3 min.
1.6
1.0
1.5
0.3 min.
3.2
1.6
1.0
1.5
0.3 min.
220 ±5%
3.2
1.6
1.0
1.5
0.3 min.
C0G (EIA)
270 ±5%
3.2
1.6
1.0
1.5
0.3 min.
DC630
C0G (EIA)
330 ±5%
3.2
1.6
1.0
1.5
0.3 min.
DC630
C0G (EIA)
390 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31A5C2J471JW01D
DC630
C0G (EIA)
470 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31A5C2J561JW01D
DC630
C0G (EIA)
560 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31B5C2J681JW01L
DC630
C0G (EIA)
680 ±5%
3.2
1.6
1.25
1.5
0.3 min.
GRM31B5C2J821JW01L
DC630
C0G (EIA)
820 ±5%
3.2
1.6
1.25
1.5
0.3 min.
GRM31B5C2J102JW01L
DC630
C0G (EIA)
1000 ±5%
3.2
1.6
1.25
1.5
0.3 min.
Electrode g
min.
(mm)
Electrode e
(mm)
Part Number
Rated Voltage
(V)
TC Code
(Standard)
Capacitance
(pF)
Length L Width W Thickness T
(mm)
(mm)
(mm)
GRM31A5C2J101JW01D
DC630
C0G (EIA)
100 ±5%
3.2
1.6
GRM31A5C2J121JW01D
DC630
C0G (EIA)
120 ±5%
3.2
GRM31A5C2J151JW01D
DC630
C0G (EIA)
150 ±5%
3.2
GRM31A5C2J181JW01D
DC630
C0G (EIA)
180 ±5%
GRM31A5C2J221JW01D
DC630
C0G (EIA)
GRM31A5C2J271JW01D
DC630
GRM31A5C2J331JW01D
GRM31A5C2J391JW01D
U2J Characteristics
Part Number
Rated Voltage
(V)
TC Code
(Standard)
Capacitance
(pF)
Length L Width W Thickness T
(mm)
(mm)
(mm)
GRM21A7U2E101JW31D
DC250
U2J (EIA)
100 ±5%
2.0
1.25
1.0
0.7
0.3 min.
GRM21A7U2E121JW31D
DC250
U2J (EIA)
120 ±5%
2.0
1.25
1.0
0.7
0.3 min.
GRM21A7U2E151JW31D
DC250
U2J (EIA)
150 ±5%
2.0
1.25
1.0
0.7
0.3 min.
Continued on the following page.
166
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
Electrode g
min.
(mm)
Electrode e
(mm)
1.0
0.7
0.3 min.
1.0
0.7
0.3 min.
1.25
1.0
0.7
0.3 min.
2.0
1.25
1.0
0.7
0.3 min.
390 ±5%
2.0
1.25
1.0
0.7
0.3 min.
470 ±5%
2.0
1.25
1.0
0.7
0.3 min.
U2J (EIA)
560 ±5%
2.0
1.25
1.0
0.7
0.3 min.
DC250
U2J (EIA)
680 ±5%
2.0
1.25
1.0
0.7
0.3 min.
GRM21A7U2E821JW31D
DC250
U2J (EIA)
820 ±5%
2.0
1.25
1.0
0.7
0.3 min.
GRM21A7U2E102JW31D
DC250
U2J (EIA)
1000 ±5%
2.0
1.25
1.0
0.7
0.3 min.
GRM21A7U2E122JW31D
DC250
U2J (EIA)
1200 ±5%
2.0
1.25
1.0
0.7
0.3 min.
GRM21A7U2E152JW31D
DC250
U2J (EIA)
1500 ±5%
2.0
1.25
1.0
0.7
0.3 min.
GRM21A7U2E182JW31D
DC250
U2J (EIA)
1800 ±5%
2.0
1.25
1.0
0.7
0.3 min.
GRM21A7U2E222JW31D
DC250
U2J (EIA)
2200 ±5%
2.0
1.25
1.0
0.7
0.3 min.
GRM31A7U2E272JW31D
DC250
U2J (EIA)
2700 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31A7U2E332JW31D
DC250
U2J (EIA)
3300 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31A7U2E392JW31D
DC250
U2J (EIA)
3900 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31A7U2E472JW31D
DC250
U2J (EIA)
4700 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31A7U2E562JW31D
DC250
U2J (EIA)
5600 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31B7U2E682JW31L
DC250
U2J (EIA)
6800 ±5%
3.2
1.6
1.25
1.5
0.3 min.
GRM31B7U2E822JW31L
DC250
U2J (EIA)
8200 ±5%
3.2
1.6
1.25
1.5
0.3 min.
GRM31B7U2E103JW31L
DC250
U2J (EIA)
10000 ±5%
3.2
1.6
1.25
1.5
0.3 min.
GRM31A7U2J100JW31D
DC630
U2J (EIA)
10 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31A7U2J120JW31D
DC630
U2J (EIA)
12 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31A7U2J150JW31D
DC630
U2J (EIA)
15 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31A7U2J180JW31D
DC630
U2J (EIA)
18 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31A7U2J220JW31D
DC630
U2J (EIA)
22 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31A7U2J270JW31D
DC630
U2J (EIA)
27 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31A7U2J330JW31D
DC630
U2J (EIA)
33 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31A7U2J390JW31D
DC630
U2J (EIA)
39 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31A7U2J470JW31D
DC630
U2J (EIA)
47 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31A7U2J560JW31D
DC630
U2J (EIA)
56 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31A7U2J680JW31D
DC630
U2J (EIA)
68 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31A7U2J820JW31D
DC630
U2J (EIA)
82 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31A7U2J101JW31D
DC630
U2J (EIA)
100 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31A7U2J121JW31D
DC630
U2J (EIA)
120 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31A7U2J151JW31D
DC630
U2J (EIA)
150 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31A7U2J181JW31D
DC630
U2J (EIA)
180 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31A7U2J221JW31D
DC630
U2J (EIA)
220 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31A7U2J271JW31D
DC630
U2J (EIA)
270 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31A7U2J331JW31D
DC630
U2J (EIA)
330 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31A7U2J391JW31D
DC630
U2J (EIA)
390 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31A7U2J471JW31D
DC630
U2J (EIA)
470 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31A7U2J561JW31D
DC630
U2J (EIA)
560 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31A7U2J681JW31D
DC630
U2J (EIA)
680 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31A7U2J821JW31D
DC630
U2J (EIA)
820 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31A7U2J102JW31D
DC630
U2J (EIA)
1000 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM32A7U2J122JW31D
DC630
U2J (EIA)
1200 ±5%
3.2
2.5
1.0
1.5
0.3 min.
GRM32A7U2J152JW31D
DC630
U2J (EIA)
1500 ±5%
3.2
2.5
1.0
1.5
0.3 min.
GRM32A7U2J182JW31D
DC630
U2J (EIA)
1800 ±5%
3.2
2.5
1.0
1.5
0.3 min.
GRM32A7U2J222JW31D
DC630
U2J (EIA)
2200 ±5%
3.2
2.5
1.0
1.5
0.3 min.
GRM31A7U3A100JW31D
DC1000
U2J (EIA)
10 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31A7U3A120JW31D
DC1000
U2J (EIA)
12 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31A7U3A150JW31D
DC1000
U2J (EIA)
15 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31A7U3A180JW31D
DC1000
U2J (EIA)
18 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31A7U3A220JW31D
DC1000
U2J (EIA)
22 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31A7U3A270JW31D
DC1000
U2J (EIA)
27 ±5%
3.2
1.6
1.0
1.5
0.3 min.
Part Number
Rated Voltage
(V)
TC Code
(Standard)
Capacitance
(pF)
Length L Width W Thickness T
(mm)
(mm)
(mm)
GRM21A7U2E181JW31D
DC250
U2J (EIA)
180 ±5%
2.0
1.25
GRM21A7U2E221JW31D
DC250
U2J (EIA)
220 ±5%
2.0
1.25
GRM21A7U2E271JW31D
DC250
U2J (EIA)
270 ±5%
2.0
GRM21A7U2E331JW31D
DC250
U2J (EIA)
330 ±5%
GRM21A7U2E391JW31D
DC250
U2J (EIA)
GRM21A7U2E471JW31D
DC250
U2J (EIA)
GRM21A7U2E561JW31D
DC250
GRM21A7U2E681JW31D
Continued on the following page.
167
9
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
9
Electrode g
min.
(mm)
Electrode e
(mm)
1.0
1.5
0.3 min.
1.0
1.5
0.3 min.
1.6
1.0
1.5
0.3 min.
3.2
1.6
1.0
1.5
0.3 min.
68 ±5%
3.2
1.6
1.0
1.5
0.3 min.
82 ±5%
3.2
1.6
1.0
1.5
0.3 min.
U2J (EIA)
100 ±5%
3.2
1.6
1.0
1.5
0.3 min.
DC1000
U2J (EIA)
120 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31A7U3A151JW31D
DC1000
U2J (EIA)
150 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31A7U3A181JW31D
DC1000
U2J (EIA)
180 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31A7U3A221JW31D
DC1000
U2J (EIA)
220 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31A7U3A271JW31D
DC1000
U2J (EIA)
270 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31A7U3A331JW31D
DC1000
U2J (EIA)
330 ±5%
3.2
1.6
1.0
1.5
0.3 min.
GRM31B7U3A391JW31L
DC1000
U2J (EIA)
390 ±5%
3.2
1.6
1.25
1.5
0.3 min.
GRM31B7U3A471JW31L
DC1000
U2J (EIA)
470 ±5%
3.2
1.6
1.25
1.5
0.3 min.
GRM31A7U3D100JW31D
DC2000
U2J (EIA)
10 ±5%
3.2
1.6
1.0
1.8
0.3 min.
GRM31A7U3D120JW31D
DC2000
U2J (EIA)
12 ±5%
3.2
1.6
1.0
1.8
0.3 min.
GRM31A7U3D150JW31D
DC2000
U2J (EIA)
15 ±5%
3.2
1.6
1.0
1.8
0.3 min.
GRM31A7U3D180JW31D
DC2000
U2J (EIA)
18 ±5%
3.2
1.6
1.0
1.8
0.3 min.
GRM31A7U3D220JW31D
DC2000
U2J (EIA)
22 ±5%
3.2
1.6
1.0
1.8
0.3 min.
GRM31A7U3D270JW31D
DC2000
U2J (EIA)
27 ±5%
3.2
1.6
1.0
1.8
0.3 min.
GRM31A7U3D330JW31D
DC2000
U2J (EIA)
33 ±5%
3.2
1.6
1.0
1.8
0.3 min.
GRM31A7U3D390JW31D
DC2000
U2J (EIA)
39 ±5%
3.2
1.6
1.0
1.8
0.3 min.
GRM31A7U3D470JW31D
DC2000
U2J (EIA)
47 ±5%
3.2
1.6
1.0
1.8
0.3 min.
GRM31A7U3D560JW31D
DC2000
U2J (EIA)
56 ±5%
3.2
1.6
1.0
1.8
0.3 min.
GRM31A7U3D680JW31D
DC2000
U2J (EIA)
68 ±5%
3.2
1.6
1.0
1.8
0.3 min.
GRM32A7U3D820JW31D
DC2000
U2J (EIA)
82 ±5%
3.2
2.5
1.0
1.8
0.3 min.
GRM32A7U3D101JW31D
DC2000
U2J (EIA)
100 ±5%
3.2
2.5
1.0
1.8
0.3 min.
GRM32A7U3D121JW31D
DC2000
U2J (EIA)
120 ±5%
3.2
2.5
1.0
1.8
0.3 min.
GRM32A7U3D151JW31D
DC2000
U2J (EIA)
150 ±5%
3.2
2.5
1.0
1.8
0.3 min.
GRM32B7U3D181JW31L
DC2000
U2J (EIA)
180 ±5%
3.2
2.5
1.25
1.8
0.3 min.
GRM32B7U3D221JW31L
DC2000
U2J (EIA)
220 ±5%
3.2
2.5
1.25
1.8
0.3 min.
GRM42A7U3F270JW31L
DC3150
U2J (EIA)
27 ±5%
4.5
2.0
1.0
2.9
0.3 min.
GRM42A7U3F330JW31L
DC3150
U2J (EIA)
33 ±5%
4.5
2.0
1.0
2.9
0.3 min.
GRM42A7U3F390JW31L
DC3150
U2J (EIA)
39 ±5%
4.5
2.0
1.0
2.9
0.3 min.
GRM42A7U3F470JW31L
DC3150
U2J (EIA)
47 ±5%
4.5
2.0
1.0
2.9
0.3 min.
GRM42A7U3F560JW31L
DC3150
U2J (EIA)
56 ±5%
4.5
2.0
1.0
2.9
0.3 min.
GRM42A7U3F680JW31L
DC3150
U2J (EIA)
68 ±5%
4.5
2.0
1.0
2.9
0.3 min.
GRM42A7U3F820JW31L
DC3150
U2J (EIA)
82 ±5%
4.5
2.0
1.0
2.9
0.3 min.
GRM42A7U3F101JW31L
DC3150
U2J (EIA)
100 ±5%
4.5
2.0
1.0
2.9
0.3 min.
Part Number
Rated Voltage
(V)
TC Code
(Standard)
Capacitance
(pF)
GRM31A7U3A330JW31D
DC1000
U2J (EIA)
33 ±5%
3.2
1.6
GRM31A7U3A390JW31D
DC1000
U2J (EIA)
39 ±5%
3.2
1.6
GRM31A7U3A470JW31D
DC1000
U2J (EIA)
47 ±5%
3.2
GRM31A7U3A560JW31D
DC1000
U2J (EIA)
56 ±5%
GRM31A7U3A680JW31D
DC1000
U2J (EIA)
GRM31A7U3A820JW31D
DC1000
U2J (EIA)
GRM31A7U3A101JW31D
DC1000
GRM31A7U3A121JW31D
168
Length L Width W Thickness T
(mm)
(mm)
(mm)
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Specifications and Test Methods
Specifications
No.
Item
Test Method
1
Operating
Temperature Range
Y55 to W125D
2
Appearance
No defects or abnormalities
Visual inspection
3
Dimensions
Within the specified dimension
Using calipers
Y
4
Dielectric Strength
No defects or abnormalities
No failure should be observed when voltage in Table is applied
between the terminations for 1 to 5 sec., provided the charge/
discharge current is less than 50mA.
Rated Voltage
Test Voltage
DC250V
200% of the rated voltage
DC630V
150% of the rated voltage
DC1kV, DC2kV
120% of the rated voltage
DC3.15kV
DC4095V
5
Insulation Resistance
(I.R.)
More than 10,000MΩ
The insulation resistance should be measured with DC500T50V
(DC250T25V in case of rated voltage: DC250V) and within 60T5
sec. of charging.
6
Capacitance
Within the specified tolerance
7
Q
1,000 min.
Capacitance
Temperature
Characteristics
Temp. Coefficient
C0G char. :
0T30ppm/D (Temp. Range : W25 to W125D)
0W30, Y72ppm/D (Temp. Range : Y55 to W25D)
U2J char. :
Y750T120ppm/D (Temp. Range : W25 to W125D)
Y750W120, Y347ppm/D (Temp. Range : Y55 to W25D)
8
9
Adhesive Strength
of Termination
No removal of the terminations or other defect should occur.
The capacitance/Q should be measured at the frequency and
voltage shown as follows.
Capacitance
CF1,000pF
CU1,000pF
Frequency
1T0.2MHz
1T0.2kHz
Voltage
AC0.5 to 5V(r.m.s.)
AC1T0.2V(r.m.s.)
The capacitance measurement should be made at each step
specified in Table.
Step
1
Temperature (D)
25T2
2
Min. Operating Temp.T3
3
25T2
4
Max. Operating Temp.T2
5
25T2
9
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 1.
Then apply 10N force in the direction of the arrow.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
10N, 10T1s
Glass Epoxy Board
Fig. 1
10
Appearance
No defects or abnormalities
Capacitance
Within the specified tolerance
Q
1,000 min.
Vibration
Resistance
Solder the capacitor to the test jig (glass epoxy board).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should be
traversed in approximately 1 min. This motion should be applied
for a period of 2 hrs. in each of 3 mutually perpendicular
directions (total of 6 hrs.).
Solder resist
Cu
Glass Epoxy Board
Continued on the following page.
169
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Specifications and Test Methods
Continued from the preceding page.
No.
Specifications
Item
Test Method
No cracking or marking defects should occur.
b
VZ[§«¬TX¥©°±­¨_`\W®«ª¦]ZYUSTW¤¥¨¢Q,§£VR^¯
[¬
Y]^ª®¯Z«
φ4.5
40
d
c
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 2.
Then apply a force in the direction shown in Fig. 3.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
20 50 Pressurizing
speed : 1.0mm/s
Pressurize
a
11
Deflection
100
LZW
(mm)
2.0Z1.25
3.2Z1.6
3.2Z2.5
4.5Z2.0
t : 1.6
Dimension (mm)
b
c
4.0
1.65
5.0
2.0
5.0
2.9
7.0
2.4
a
1.2
2.2
2.2
3.5
R230
d
Flexure=1
Capacitance meter
1.0
45
Fig. 3
Fig. 2
12
9
Solderability of
Termination
Resistance
13 to Soldering
Heat
14
75% of the terminations are to be soldered evenly
and continuously.
Appearance
No marking defects
Capacitance
Change
Within T2.5%
Q
1,000 min.
I.R.
More than 10,000MΩ
Dielectric
Strength
In accordance with item No.4
Appearance
No marking defects
Capacitance
Change
Within T2.5%
Q
500 min.
I.R.
More than 10,000MΩ
Dielectric
Strength
In accordance with item No.4
Temperature
Cycle
(in mm)
45
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion). Immerse in
solder solution for 2T0.5 sec.
Immersing speed: 25T2.5mm/s
Temp. of solder: 245T5°C Lead Free Solder (Sn-3.0Ag-0.5Cu)
235T5°C H60A or H63A Eutectic Solder
Preheat the capacitor at 120 to 150D* for 1 min.
Immerse the capacitor in solder solution at 260T5D for 10T1 sec.
Let sit at room condition* for 24T2 hrs., then measure.
#Immersing speed: 25T2.5mm/s
*Preheating for more than 3.2Z2.5mm
Temperature
100 to 120D
170 to 200D
Step
1
2
Time
1 min.
1 min.
Fix the capacitor to the supporting jig (glass epoxy board) shown
in Fig. 4.
Perform the 5 cycles according to the 4 heat treatments listed in
the following table.
Let sit for 24T2 hrs. at room condition*, then measure.
Step
1
2
3
4
Temperature (D)
Min. Operating Temp.T3
Room Temp.
Max. Operating Temp.T2
Room Temp.
Time (min.)
30T3
2 to 3
30T3
2 to 3
Solder resist
Cu
Glass Epoxy Board
Fig. 4
15
16
Humidity
(Steady
State)
Life
Appearance
No marking defects
Capacitance
Change
Within T5.0%
Q
350 min.
I.R.
More than 1,000MΩ
Dielectric
Strength
In accordance with item No.4
Appearance
No marking defects
Capacitance
Change
Within T3.0%
Q
350 min.
I.R.
More than 1,000MΩ
Dielectric
Strength
In accordance with item No.4
Let the capacitor sit at 40T2D and relative humidity of 90 to 95%
for 500 W24
Y00 hrs.
Remove and let sit for 24T2 hrs. at room condition*, then
measure.
Apply voltage as Table for 1,000 W48
Y00 hrs. at maximum operating
temperature T3D.
Remove and let sit for 24T2 hrs. at room condition*, then
measure.
Rated Voltage
DC250V
DC630V, DC1kV,
DC2kV, DC3.15kV
120% of the rated voltage
The charge/discharge current is less than 50mA.
* "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
170
Applied Voltage
150% of the rated voltage
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Monolithic Ceramic Capacitors
Medium Voltage High Capacitance for General Use
e
g
e
■ Features
T
1. A new monolithic structure for small, high
capacitance capable of operating at high voltage
levels.
2. Sn-plated external electrodes realize good
solderability.
3. Use the GRM18/21/31 types with flow or reflow
solderring, and other types with reflow soldering
only.
L
Part Number
GRM188
GRM21A
GRM21B
GRM31B
GRM31C
GRM32Q
GRM32D
GRM43Q
GRM43D
GRM55D
■ Applications
L
W
Dimensions (mm)
W
T
1.6 ±0.1 0.8 ±0.1
2.0 ±0.2 1.25 ±0.2
3.2 ±0.2
1.6 ±0.2
3.2 ±0.3
2.5 ±0.2
4.5 ±0.4
3.2 ±0.3
5.7 ±0.4
5.0 ±0.4
e
0.8 ±0.1
0.2 to 0.5
1.0 +0,-0.3
1.25 ±0.2
1.25 +0,-0.3
1.6 ±0.2
1.5 +0,-0.3 0.3 min.
2.0 +0,-0.3
1.5 +0,-0.3
2.0 +0,-0.3
2.0 +0,-0.3
g min.
0.4
0.7
1.2
2.2
3.2
1. Ideal for use on diode-snubber circuits for
switching power supplies.
2. Ideal for use as primary-secondary coupling for
DC-DC converter.
3. Ideal for use on line filters and ringer detectors
for telephones, facsimiles and modems.
Electrode g
min.
(mm)
Electrode e
(mm)
0.8
0.4
0.2 to 0.5
0.8
0.4
0.2 to 0.5
0.8
0.8
0.4
0.2 to 0.5
0.8
0.8
0.4
0.2 to 0.5
1.6
0.8
0.8
0.4
0.2 to 0.5
1000pF ±10%
2.0
1.25
1.0
0.7
0.3 min.
1500pF ±10%
1.6
0.8
0.8
0.4
0.2 to 0.5
X7R (EIA)
1500pF ±10%
2.0
1.25
1.0
0.7
0.3 min.
X7R (EIA)
2200pF ±10%
1.6
0.8
0.8
0.4
0.2 to 0.5
DC250
X7R (EIA)
2200pF ±10%
2.0
1.25
1.0
0.7
0.3 min.
DC250
X7R (EIA)
3300pF ±10%
2.0
1.25
1.0
0.7
0.3 min.
GRM21AR72E472KW01D
DC250
X7R (EIA)
4700pF ±10%
2.0
1.25
1.0
0.7
0.3 min.
GRM21AR72E682KW01D
DC250
X7R (EIA)
6800pF ±10%
2.0
1.25
1.0
0.7
0.3 min.
GRM21BR72E103KW03L
DC250
X7R (EIA)
10000pF ±10%
2.0
1.25
1.25
0.7
0.3 min.
GRM31BR72E153KW01L
DC250
X7R (EIA)
15000pF ±10%
3.2
1.6
1.25
1.2
0.3 min.
GRM31BR72E223KW01L
DC250
X7R (EIA)
22000pF ±10%
3.2
1.6
1.25
1.2
0.3 min.
GRM31CR72E333KW03L
DC250
X7R (EIA)
33000pF ±10%
3.2
1.6
1.6
1.2
0.3 min.
GRM31CR72E473KW03L
DC250
X7R (EIA)
47000pF ±10%
3.2
1.6
1.6
1.2
0.3 min.
GRM31BR72E683KW01L
DC250
X7R (EIA)
68000pF ±10%
3.2
1.6
1.25
1.2
0.3 min.
GRM32QR72E683KW01L
DC250
X7R (EIA)
68000pF ±10%
3.2
2.5
1.5
1.2
0.3 min.
GRM31CR72E104KW03L
DC250
X7R (EIA)
0.10µF ±10%
3.2
1.6
1.6
1.2
0.3 min.
GRM32DR72E104KW01L
DC250
X7R (EIA)
0.10µF ±10%
3.2
2.5
2.0
1.2
0.3 min.
GRM32QR72E154KW01L
DC250
X7R (EIA)
0.15µF ±10%
3.2
2.5
1.5
1.2
0.3 min.
GRM43QR72E154KW01L
DC250
X7R (EIA)
0.15µF ±10%
4.5
3.2
1.5
2.2
0.3 min.
GRM32DR72E224KW01L
DC250
X7R (EIA)
0.22µF ±10%
3.2
2.5
2.0
1.2
0.3 min.
GRM43DR72E224KW01L
DC250
X7R (EIA)
0.22µF ±10%
4.5
3.2
2.0
2.2
0.3 min.
GRM43DR72E334KW01L
DC250
X7R (EIA)
0.33µF ±10%
4.5
3.2
2.0
2.2
0.3 min.
GRM55DR72E334KW01L
DC250
X7R (EIA)
0.33µF ±10%
5.7
5.0
2.0
3.2
0.3 min.
GRM43DR72E474KW01L
DC250
X7R (EIA)
0.47µF ±10%
4.5
3.2
2.0
2.2
0.3 min.
GRM55DR72E474KW01L
DC250
X7R (EIA)
0.47µF ±10%
5.7
5.0
2.0
3.2
0.3 min.
GRM55DR72E105KW01L
DC250
X7R (EIA)
1.0µF ±10%
5.7
5.0
2.0
3.2
0.3 min.
GRM31BR72J102KW01L
DC630
X7R (EIA)
1000pF ±10%
3.2
1.6
1.25
1.2
0.3 min.
Part Number
Rated Voltage
(V)
TC Code
(Standard)
Capacitance
Length L Width W Thickness T
(mm)
(mm)
(mm)
GRM188R72E221KW07D
DC250
X7R (EIA)
220pF ±10%
1.6
0.8
GRM188R72E331KW07D
DC250
X7R (EIA)
330pF ±10%
1.6
0.8
GRM188R72E471KW07D
DC250
X7R (EIA)
470pF ±10%
1.6
GRM188R72E681KW07D
DC250
X7R (EIA)
680pF ±10%
1.6
GRM188R72E102KW07D
DC250
X7R (EIA)
1000pF ±10%
GRM21AR72E102KW01D
DC250
X7R (EIA)
GRM188R72E152KW07D
DC250
X7R (EIA)
GRM21AR72E152KW01D
DC250
GRM188R72E222KW07D
DC250
GRM21AR72E222KW01D
GRM21AR72E332KW01D
Continued on the following page.
171
10
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
10
Electrode g
min.
(mm)
Electrode e
(mm)
1.25
1.2
0.3 min.
1.25
1.2
0.3 min.
1.6
1.25
1.2
0.3 min.
3.2
1.6
1.25
1.2
0.3 min.
6800pF ±10%
3.2
1.6
1.25
1.2
0.3 min.
10000pF ±10%
3.2
1.6
1.25
1.2
0.3 min.
15000pF ±10%
3.2
1.6
1.6
1.2
0.3 min.
X7R (EIA)
22000pF ±10%
3.2
2.5
1.5
1.2
0.3 min.
DC630
X7R (EIA)
33000pF ±10%
3.2
2.5
2.0
1.2
0.3 min.
GRM32DR72J473KW01L
DC630
X7R (EIA)
47000pF ±10%
3.2
2.5
2.0
1.2
0.3 min.
GRM43QR72J683KW01L
DC630
X7R (EIA)
68000pF ±10%
4.5
3.2
1.5
2.2
0.3 min.
GRM43DR72J104KW01L
DC630
X7R (EIA)
0.10µF ±10%
4.5
3.2
2.0
2.2
0.3 min.
GRM55DR72J154KW01L
DC630
X7R (EIA)
0.15µF ±10%
5.7
5.0
2.0
3.2
0.3 min.
GRM55DR72J224KW01L
DC630
X7R (EIA)
0.22µF ±10%
5.7
5.0
2.0
3.2
0.3 min.
GRM31BR73A471KW01L
DC1000
X7R (EIA)
470pF ±10%
3.2
1.6
1.25
1.2
0.3 min.
GRM31BR73A102KW01L
DC1000
X7R (EIA)
1000pF ±10%
3.2
1.6
1.25
1.2
0.3 min.
GRM31BR73A152KW01L
DC1000
X7R (EIA)
1500pF ±10%
3.2
1.6
1.25
1.2
0.3 min.
GRM31BR73A222KW01L
DC1000
X7R (EIA)
2200pF ±10%
3.2
1.6
1.25
1.2
0.3 min.
GRM31BR73A332KW01L
DC1000
X7R (EIA)
3300pF ±10%
3.2
1.6
1.25
1.2
0.3 min.
GRM31BR73A472KW01L
DC1000
X7R (EIA)
4700pF ±10%
3.2
1.6
1.25
1.2
0.3 min.
GRM32QR73A682KW01L
DC1000
X7R (EIA)
6800pF ±10%
3.2
2.5
1.5
1.2
0.3 min.
GRM32QR73A103KW01L
DC1000
X7R (EIA)
10000pF ±10%
3.2
2.5
1.5
1.2
0.3 min.
GRM32DR73A153KW01L
DC1000
X7R (EIA)
15000pF ±10%
3.2
2.5
2.0
1.2
0.3 min.
GRM32DR73A223KW01L
DC1000
X7R (EIA)
22000pF ±10%
3.2
2.5
2.0
1.2
0.3 min.
GRM43DR73A333KW01L
DC1000
X7R (EIA)
33000pF ±10%
4.5
3.2
2.0
2.2
0.3 min.
GRM43DR73A473KW01L
DC1000
X7R (EIA)
47000pF ±10%
4.5
3.2
2.0
2.2
0.3 min.
GRM55DR73A104KW01L
DC1000
X7R (EIA)
0.10µF ±10%
5.7
5.0
2.0
3.2
0.3 min.
Part Number
Rated Voltage
(V)
TC Code
(Standard)
Capacitance
GRM31BR72J152KW01L
DC630
X7R (EIA)
1500pF ±10%
3.2
1.6
GRM31BR72J222KW01L
DC630
X7R (EIA)
2200pF ±10%
3.2
1.6
GRM31BR72J332KW01L
DC630
X7R (EIA)
3300pF ±10%
3.2
GRM31BR72J472KW01L
DC630
X7R (EIA)
4700pF ±10%
GRM31BR72J682KW01L
DC630
X7R (EIA)
GRM31BR72J103KW01L
DC630
X7R (EIA)
GRM31CR72J153KW03L
DC630
X7R (EIA)
GRM32QR72J223KW01L
DC630
GRM32DR72J333KW01L
172
Length L Width W Thickness T
(mm)
(mm)
(mm)
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Specifications and Test Methods
Specifications
No.
Item
Test Method
1
Operating
Temperature Range
Y55 to W125D
2
Appearance
No defects or abnormalities
Visual inspection
3
Dimensions
Within the specified dimensions
Using calipers
Y
4
Dielectric Strength
No defects or abnormalities
No failure should be observed when 150% of the rated voltage
(200% of the rated voltage in case of rated voltage: DC250V,
120% of the rated voltage in case of rated voltage: DC1kV) is
applied between the terminations for 1 to 5 sec., provided the
charge/discharge current is less than 50mA.
5
Insulation Resistance
(I.R.)
CU0.01µF: More than 100MΩ • µF
CF0.01µF: More than 10,000MΩ
The insulation resistance should be measured with DC500T50V
(DC250T25V in case of rated voltage: DC250V) and within 60T5
sec. of charging.
6
Capacitance
Within the specified tolerance
7
Dissipation
Factor (D.F.)
0.025 max.
The capacitance/D.F. should be measured at a frequency of
1T0.2kHz and a voltage of AC1T0.2V(r.m.s.)
The capacitance measurement should be made at each step
specified in Table.
8
Capacitance
Temperature
Characteristics
Cap. Change
Within T15%
(Temp. Range: Y55 to W125D)
Step
1
2
3
4
5
Temperature (D)
25T2
Min. Operating Temp.T3
25T2
Max. Operating Temp.T2
25T2
#Pretreatment
Perform a heat treatment at 150 W0
Y10 D for 60T5 min. and then
let sit for 24T2 hrs. at room condition*.
9
Adhesive Strength
of Termination
No removal of the terminations or other defect should occur.
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 1.
Then apply 10N force in the direction of the arrow.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
10N (5N : Size 1.6g0.8mm only), 10T1s
Glass Epoxy Board
Fig. 1
10
Appearance
No defects or abnormalities
Capacitance
Within the specified tolerance
D.F.
0.025 max.
Vibration
Resistance
Solder the capacitor to the test jig (glass epoxy board).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should be
traversed in approximately 1 min. This motion should be applied
for a period of 2 hrs. in each of 3 mutually perpendicular
directions (total of 6 hrs.).
Solder resist
Cu
Glass Epoxy Board
* "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
173
10
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Specifications and Test Methods
Continued from the preceding page.
No.
Specifications
Item
Test Method
No cracking or marking defects should occur.
b
VZ[§«¬TX¥©°±­¨_`\W®«ª¦]ZYUSTW¤¥¨¢Q,§£VR^¯
[¬
Y]^ª®¯Z«
φ4.5
40
d
c
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 2.
Then apply a force in the direction shown in Fig. 3.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
20 50 Pressurizing
speed : 1.0mm/s
Pressurize
a
100
11
Deflection
LZW
(mm)
1.6Z0.80
2.0Z1.25
3.2Z1.60
3.2Z2.50
4.5Z3.20
5.7Z5.00
t : 1.6
Dimension (mm)
b
c
1.25
3.0
1.65
4.0
2.05
5.0
2.95
5.0
3.75
7.0
5.65
8.0
a
1.0
1.2
2.2
2.2
3.5
4.5
R230
d
Flexure=1
Capacitance meter
45
45
(in mm)
1.0
Fig. 3
Fig. 2
12
10
Solderability of
Termination
Resistance
13 to Soldering
Heat
75% of the terminations are to be soldered evenly and continuously.
Appearance
No marking defects
Capacitance
Change
Within T10%
D.F.
0.025 max.
I.R.
CU0.01µF: More than 100MΩ • µF
CF0.01µF: More than 10,000MΩ
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion).
Immerse in solder solution for 2T0.5 sec.
Immersing speed: 25T2.5mm/s
Temp. of solder: 245T5°C Lead Free Solder (Sn-3.0Ag-0.5Cu)
235T5°C H60A or H63A Eutectic Solder
Preheat the capacitor at 120 to 150D* for 1 min.
Immerse the capacitor in solder solution at 260T5D for 10T1
sec. Let sit at room condition* for 24T2 hrs., then measure.
#Immersing speed: 25T2.5mm/s
#Pretreatment
Perform a heat treatment at 150 W00
Y10 D for 60T5 min. and then
let sit for 24T2 hrs. at room condition*.
*Preheating for more than 3.2Z2.5mm
14
Dielectric
Strength
In accordance with item No.4
Appearance
No marking defects
Capacitance
Change
Within T7.5%
D.F.
0.025 max.
I.R.
CU0.01µF: More than 100MΩ • µF
CF0.01µF: More than 10,000MΩ
Temperature
Cycle
Temperature
100 to 120D
170 to 200D
Step
1
2
Time
1 min.
1 min.
Fix the capacitor to the supporting jig (glass epoxy board) shown
in Fig. 4.
Perform the 5 cycles according to the 4 heat treatments listed in
the following table.
Let sit for 24T2 hrs. at room condition*, then measure.
Time (min.)
Temperature (D)
Step
1
Min. Operating Temp.T3
30T3
2
Room Temp.
2 to 3
3
Max. Operating Temp.T2
30T3
4
Room Temp.
2 to 3
#Pretreatment
Perform a heat treatment at 150 W00
Y10 D for 60T5 min. and then
let sit for 24T2 hrs. at room condition*.
Dielectric
Strength
In accordance with item No.4
Solder resist
Cu
Glass Epoxy Board
Fig. 4
15
Humidity
(Steady
State)
Appearance
No marking defects
Capacitance
Change
Within T15%
D.F.
0.05 max.
I.R.
CU0.01µF: More than 10MΩ • µF
CF0.01µF: More than 1,000MΩ
Dielectric
Strength
In accordance with item No.4
Let the capacitor sit at 40T2D and relative humidity of 90 to 95%
for 500 W24
Y00 hrs.
Remove and let sit for 24T2 hrs. at room condition*, then
measure.
#Pretreatment
Perform a heat treatment at 150 W00
Y10 D for 60T5 min. and then
let sit for 24T2 hrs. at room condition*.
* "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
174
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Specifications and Test Methods
Continued from the preceding page.
No.
16
17
Specifications
Item
Life
Humidity
Loading
(Application:
DC250V,
DC630V
item)
Appearance
No marking defects
Capacitance
Change
Within T15% (rated voltage: DC250V, DC630V)
Within T20% (rated voltage: DC1kV)
D.F.
0.05 max.
I.R.
CU0.01µF: More than 10MΩ • µF
CF0.01µF: More than 1,000MΩ
Dielectric
Strength
In accordance with item No.4
Appearance
No marking defects
Capacitance
Change
Within T15%
D.F.
0.05 max.
I.R.
CU0.01µF: More than 10MΩ • µF
CF0.01µF: More than 1,000MΩ
Dielectric
Strength
In accordance with item No.4
Test Method
Apply 120% of the rated voltage (150% of the rated voltage in
case of rated voltage: DC250V, 110% of the rated voltage in case
of rated voltage: DC1kV) for 1,000 W48
Y00 hrs. at maximum
operating temperature T3D. Remove and let sit for 24T2 hrs. at
room condition*, then measure.
The charge/discharge current is less than 50mA.
#Pretreatment
Apply test voltage for 60T5 min. at test temperature.
Remove and let sit for 24T2 hrs. at room condition*.
Apply the rated voltage at 40T2D and relative humidity of 90 to
95% for 500 W24
Y00 hrs.
Remove and let sit for 24T2 hrs. at room condition*, then
measure.
#Pretreatment
Apply test voltage for 60T5 min. at test temperature.
Remove and let sit for 24T2 hrs. at room condition*.
* "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
10
175
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Monolithic Ceramic Capacitors
Only for LCD Backlight Inverter Circuit
■ Features
e
g
e
T
1. Low-loss and suitable for high frequency circuits
2. Murata's original internal electrode structure
realizes high flash-over voltage.
3. A new monolithic structure for small, surfacemountable devices capable of operating at high
voltage levels.
4. Sn-plated external electrodes realize good
solderability.
5. Only for reflow soldering
6. The capacitors less than 22pF can be applied
maximum 4.0kV peak to peak at 100kHz or less
only for the ballast or the resonance usage in
the LCD backlight inverter circuit.
L
Part Number
GRM42A
L
4.5 ±0.3
W
Dimensions (mm)
W
T
e min.
2.0 ±0.2 1.0 +0, - 0.3 0.3
g min.
2.9
■ Applications
Ideal for use as the ballast in LCD backlight
inverter.
11
Electrode g
min.
(mm)
Electrode e
(mm)
1.0
2.9
0.3 min.
1.0
2.9
0.3 min.
2.0
1.0
2.9
0.3 min.
4.5
2.0
1.0
2.9
0.3 min.
18 ±5%
4.5
2.0
1.0
2.9
0.3 min.
22 ±5%
4.5
2.0
1.0
2.9
0.3 min.
C0G (EIA)
27 ±5%
4.5
2.0
1.0
2.9
0.3 min.
DC3150
C0G (EIA)
33 ±5%
4.5
2.0
1.0
2.9
0.3 min.
GRM42A5C3F390JW01L
DC3150
C0G (EIA)
39 ±5%
4.5
2.0
1.0
2.9
0.3 min.
GRM42A5C3F470JW01L
DC3150
C0G (EIA)
47 ±5%
4.5
2.0
1.0
2.9
0.3 min.
Part Number
Rated Voltage
(V)
TC Code
(Standard)
Capacitance
(pF)
GRM42A5C3F050DW01L
DC3150
C0G (EIA)
5.0 ±0.5pF
4.5
2.0
GRM42A5C3F100JW01L
DC3150
C0G (EIA)
10 ±5%
4.5
2.0
GRM42A5C3F120JW01L
DC3150
C0G (EIA)
12 ±5%
4.5
GRM42A5C3F150JW01L
DC3150
C0G (EIA)
15 ±5%
GRM42A5C3F180JW01L
DC3150
C0G (EIA)
GRM42A5C3F220JW01L
DC3150
C0G (EIA)
GRM42A5C3F270JW01L
DC3150
GRM42A5C3F330JW01L
176
Length L Width W Thickness T
(mm)
(mm)
(mm)
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Specifications and Test Methods
Specifications
No.
Item
Test Method
1
Operating
Temperature Range
Y55 to W125D
2
Appearance
No defects or abnormalities
Visual inspection
3
Dimensions
Within the specified dimension
Using calipers
4
Dielectric Strength
No defects or abnormalities
No failure should be observed when DC4095V is applied
between the terminations for 1 to 5 sec., provided the charge/
discharge current is less than 50mA.
5
Insulation Resistance
(I.R.)
More than 10,000MΩ
The insulation resistance should be measured with DC500T50V
and within 60T5 sec. of charging.
6
Capacitance
Within the specified tolerance
7
Q
1,000 min.
Y
The capacitance/Q should be measured at a frequency of
1T0.2MHz and a voltage of AC0.5 to 5V(r.m.s.)
The capacitance measurement should be made at each step
specified in Table.
8
9
Capacitance
Temperature
Characteristics
Adhesive Strength
of Termination
Step
1
2
3
4
5
Temp. Coefficient
0T30ppm/D (Temp. Range: W25 to W125D)
0W30, Y72ppm/D (Temp. Range: Y55 to W25D)
No removal of the terminations or other defect should occur.
Temperature (D)
25T2
Min. Operating Temp.T3
25T2
Max. Operating Temp.T2
25T2
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 1.
Then apply 10N force in the direction of the arrow.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
10N, 10T1s
Glass Epoxy Board
Fig. 1
10
Appearance
No defects or abnormalities
Capacitance
Within the specified tolerance
Q
1,000 min.
Solder the capacitor to the test jig (glass epoxy board).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should be
traversed in approximately 1 min. This motion should be applied
for a period of 2 hrs. in each of 3 mutually perpendicular
directions (total of 6 hrs.).
Vibration
Resistance
Solder resist
Cu
Glass Epoxy Board
No cracking or marking defects should occur.
b
VZ[§«¬TX¥©°±­¨_`\W®«ª¦]ZYUSTW¤¥¨¢Q,§£VR^¯
[¬
Y]^ª®¯Z«
φ4.5
40
d
c
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 2.
Then apply a force in the direction shown in Fig. 3.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
20 50 Pressurizing
speed : 1.0mm/s
Pressurize
a
11
Deflection
100
LZW
(mm)
4.5Z2.0
a
3.5
t : 1.6
Dimension (mm)
b
c
7.0
2.4
Fig. 2
R230
d
1.0
Flexure=1
Capacitance meter
45
45
(in mm)
Fig. 3
Continued on the following page.
177
11
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Specifications and Test Methods
Continued from the preceding page.
No.
12
Solderability of
Termination
Resistance
13 to Soldering
Heat
14
Specifications
Item
75% of the terminations are to be soldered evenly
and continuously.
Appearance
No marking defects
Capacitance
Change
Within T2.5%
Q
1,000 min.
I.R.
More than 10,000MΩ
Dielectric
Strength
In accordance with item No.4
Appearance
No marking defects
Capacitance
Change
Within T2.5%
Q
1,000 min.
I.R.
More than 10,000MΩ
Dielectric
Strength
In accordance with item No.4
Temperature
Cycle
Test Method
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion). Immerse in
solder solution for 2T0.5 sec.
Immersing speed: 25T2.5mm/s
Temp. of solder: 245T5°C Lead Free Solder (Sn-3.0Ag-0.5Cu)
235T5°C H60A or H63A Eutectic Solder
Preheat the capacitor as table.
Immerse the capacitor in solder solution at 260T5D for 10T1 sec.
Let sit at room condition* for 24T2 hrs., then measure.
#Immersing speed: 25T2.5mm/s
*Preheating
Step
1
2
Temperature
100 to 120D
170 to 200D
Time
1 min.
1 min.
Fix the capacitor to the supporting jig (glass epoxy board) shown
in Fig. 4.
Perform the 5 cycles according to the 4 heat treatments listed in
the following table.
Let sit for 24T2 hrs. at room condition*, then measure.
Step
1
2
3
4
Temperature (D)
Min. Operating Temp.T3
Room Temp.
Max. Operating Temp.T2
Room Temp.
Time (min.)
30T3
2 to 3
30T3
2 to 3
Solder resist
Cu
Glass Epoxy Board
Fig. 4
11
15
16
Humidity
(Steady
State)
Life
Appearance
No marking defects
Capacitance
Change
Within T5.0%
Q
350 min.
I.R.
More than 1,000MΩ
Dielectric
Strength
In accordance with item No.4
Appearance
No marking defects
Capacitance
Change
Within T3.0%
Q
350 min.
I.R.
More than 1,000MΩ
Dielectric
Strength
In accordance with item No.4
Let the capacitor sit at 40T2D and relative humidity of 90 to 95%
for 500 W24
Y00 hrs.
Remove and let sit for 24T2 hrs. at room condition*, then
measure.
Apply 120% of the rated voltage for 1,000 W48
Y00 hrs. at maximum
operating temperature T3D.
Remove and let sit for 24T2 hrs. at room condition*, then
measure.
The charge/discharge current is less than 50mA.
* "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
178
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Monolithic Ceramic Capacitors
Only for Information Devices
0.3 min.
g
0.3 min.
■ Features
T
1. These items are designed specifically for
telecommunications devices (IEEE802.3) in
Ethernet LAN and primary-secondary coupling for
DC-DC converter.
2. A new monolithic structure for small, high
capacitance capable of operating at high voltage
levels
3. Sn-plated external electrodes realizes good
solderability.
4. Only for reflow soldering
5. The low-profile type (thickness: 1.5mm max.) is
available. Fit for use on thinner type equipment.
L
Part Number
GR442Q
GR443D
GR443Q
GR455D
L
4.5 ±0.3
4.5 ±0.4
5.7 ±0.4
W
Dimensions (mm)
W
T
2.0 ±0.2
1.5 +0, -0.3
2.0 +0, -0.3
3.2 ±0.3
1.5 +0, -0.3
5.0 ±0.4
2.0 +0, -0.3
g min.
2.5
3.2
■ Applications
1. Ideal for use on telecommunications devices in
Ethernet LAN
2. Ideal for use as primary-secondary coupling for
DC-DC converter
Electrode g
min.
(mm)
Electrode e
(mm)
1.5
2.5
0.3 min.
1.5
2.5
0.3 min.
2.0
1.5
2.5
0.3 min.
4.5
2.0
1.5
2.5
0.3 min.
4.5
2.0
1.5
2.5
0.3 min.
270 ±10%
4.5
2.0
1.5
2.5
0.3 min.
X7R (EIA)
330 ±10%
4.5
2.0
1.5
2.5
0.3 min.
X7R (EIA)
390 ±10%
4.5
2.0
1.5
2.5
0.3 min.
DC2000
X7R (EIA)
470 ±10%
4.5
2.0
1.5
2.5
0.3 min.
GR442QR73D561KW01L
DC2000
X7R (EIA)
560 ±10%
4.5
2.0
1.5
2.5
0.3 min.
GR442QR73D681KW01L
DC2000
X7R (EIA)
680 ±10%
4.5
2.0
1.5
2.5
0.3 min.
GR442QR73D821KW01L
DC2000
X7R (EIA)
820 ±10%
4.5
2.0
1.5
2.5
0.3 min.
GR442QR73D102KW01L
DC2000
X7R (EIA)
1000 ±10%
4.5
2.0
1.5
2.5
0.3 min.
GR442QR73D122KW01L
DC2000
X7R (EIA)
1200 ±10%
4.5
2.0
1.5
2.5
0.3 min.
GR442QR73D152KW01L
DC2000
X7R (EIA)
1500 ±10%
4.5
2.0
1.5
2.5
0.3 min.
GR443QR73D182KW01L
DC2000
X7R (EIA)
1800 ±10%
4.5
3.2
1.5
2.5
0.3 min.
GR443QR73D222KW01L
DC2000
X7R (EIA)
2200 ±10%
4.5
3.2
1.5
2.5
0.3 min.
GR443QR73D272KW01L
DC2000
X7R (EIA)
2700 ±10%
4.5
3.2
1.5
2.5
0.3 min.
GR443QR73D332KW01L
DC2000
X7R (EIA)
3300 ±10%
4.5
3.2
1.5
2.5
0.3 min.
GR443QR73D392KW01L
DC2000
X7R (EIA)
3900 ±10%
4.5
3.2
1.5
2.5
0.3 min.
GR443DR73D472KW01L
DC2000
X7R (EIA)
4700 ±10%
4.5
3.2
2.0
2.5
0.3 min.
GR455DR73D103KW01L
DC2000
X7R (EIA)
10000 ±10%
5.7
5.0
2.0
3.2
0.3 min.
Part Number
Rated Voltage
(V)
TC Code
(Standard)
Capacitance
(pF)
Length L Width W Thickness T
(mm)
(mm)
(mm)
GR442QR73D101KW01L
DC2000
X7R (EIA)
100 ±10%
4.5
2.0
GR442QR73D121KW01L
DC2000
X7R (EIA)
120 ±10%
4.5
2.0
GR442QR73D151KW01L
DC2000
X7R (EIA)
150 ±10%
4.5
GR442QR73D181KW01L
DC2000
X7R (EIA)
180 ±10%
GR442QR73D221KW01L
DC2000
X7R (EIA)
220 ±10%
GR442QR73D271KW01L
DC2000
X7R (EIA)
GR442QR73D331KW01L
DC2000
GR442QR73D391KW01L
DC2000
GR442QR73D471KW01L
179
12
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Specifications and Test Methods
Specifications
No.
Item
Test Method
1
Operating
Temperature Range
Y55 to W125D
2
Appearance
No defects or abnormalities
Visual inspection
3
Dimensions
Within the specified dimensions
Using calipers
Y
No failure should be observed when voltage in table is applied
between the terminations, provided the charge/discharge current
is less than 50mA.
4
Dielectric Strength
No defects or abnormalities
Test Voltage
120% of the rated voltage
AC1500V(r.m.s.)
Rated Voltage
DC2kV
5
Pulse Voltage
No self healing breakdowns or flash-overs have taken place in
the capacitor.
6
Insulation Resistance
(I.R.)
More than 6,000MΩ
7
Capacitance
Within the specified tolerance
8
Dissipation
Factor (D.F.)
0.025 max.
Time
60T1 sec.
60T1 sec.
10 impulse of alternating polarity is subjected.
(5 impulse for each polarity)
The interval between impulse is 60 sec.
Applied Voltage: 2.5kV zero to peak
The insulation resistance should be measured with DC500T50V
and within 60T5 sec. of charging.
The capacitance/D.F. should be measured at a frequency of
1T0.2kHz and a voltage of AC1T0.2V(r.m.s.)
The capacitance measurement should be made at each step
specified in Table.
9
Capacitance
Temperature
Characteristics
Cap. Change
within T15%
(Temp. Range: Y55 to W125D)
Step
1
2
3
4
5
Temperature (D)
25T2
Min. Operating Temp.T3
25T2
Max. Operating Temp.T2
25T2
#Pretreatment
Perform a heat treatment at 150 W0
Y10 D for 60T5 min. and then
let sit for 24T2 hrs. at room condition*.
12
10
Adhesive Strength
of Termination
No removal of the terminations or other defect should occur.
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 1.
Then apply 10N force in the direction of the arrow.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
10N, 10T1s
Glass Epoxy Board
Fig. 1
11
Appearance
No defects or abnormalities
Capacitance
Within the specified tolerance
D.F.
0.025 max.
Vibration
Resistance
Solder the capacitor to the test jig (glass epoxy board).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should be
traversed in approximately 1 min. This motion should be applied
for a period of 2 hrs. in each of 3 mutually perpendicular
directions (total of 6 hrs.).
Solder resist
Cu
Glass Epoxy Board
* "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
180
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Specifications and Test Methods
Continued from the preceding page.
No.
Specifications
Item
Test Method
No cracking or marking defects should occur.
b
VZ[§«¬TX¥©°±­¨_`\W®«ª¦]ZYUSTW¤¥¨¢Q,§£VR^¯
[¬
Y]^ª®¯Z«
φ4.5
40
d
c
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 2.
Then apply a force in the direction shown in Fig. 3.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
a
12
100
Deflection
LZW
(mm)
4.5Z2.0
4.5Z3.2
5.7Z5.0
Dimension (mm)
b
c
2.4
7.0
3.7
7.0
5.6
8.0
a
3.5
3.5
4.5
20 50 Pressurizing
speed : 1.0mm/s
Pressurize
t : 1.6
R230
d
Flexure=1
1.0
Capacitance meter
45
45
Fig. 2
(in mm)
Fig. 3
13
Solderability of
Termination
Resistance
14 to Soldering
Heat
75% of the terminations are to be soldered evenly and continuously.
Appearance
No marking defects
Capacitance
Change
Within T10%
D.F.
0.025 max.
I.R.
More than 1,000MΩ
Dielectric
Strength
In accordance with item No.4
Appearance
No marking defects
Capacitance
Change
Within T15%
D.F.
0.05 max.
I.R.
More than 3,000MΩ
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion).
Immerse in solder solution for 2T0.5 sec.
Immersing speed: 25T2.5mm/s
Temp. of solder: 245T5°C Lead Free Solder (Sn-3.0Ag-0.5Cu)
235T5°C H60A or H63A Eutectic Solder
Preheat the capacitor as table.
Immerse the capacitor in solder solution at 260T5D for 10T1
sec. Let sit at room condition* for 24T2 hrs., then measure.
#Immersing speed: 25T2.5mm/s
#Pretreatment
Perform a heat treatment at 150 W00
Y10 D for 60T5 min. and then
let sit for 24T2 hrs. at room condition*.
*Preheating
15
Temperature
Cycle
Dielectric
Strength
Temperature
100 to 120D
170 to 200D
Step
1
2
Time
1 min.
1 min.
Fix the capacitor to the supporting jig (glass epoxy board) shown
in Fig. 4.
Perform the 5 cycles according to the 4 heat treatments listed in
the following table.
Let sit for 24T2 hrs. at room condition*, then measure.
Time (min.)
Temperature (D)
Step
1
Min. Operating Temp.T3
30T3
2
Room Temp.
2 to 3
3
Max. Operating Temp.T2
30T3
4
Room Temp.
2 to 3
#Pretreatment
Perform a heat treatment at 150 W00
Y10 D for 60T5 min. and then
let sit for 24T2 hrs. at room condition*.
In accordance with item No.4
Solder resist
Cu
Glass Epoxy Board
Fig. 4
16
Humidity
(Steady
State)
Appearance
No marking defects
Capacitance
Change
Within T15%
D.F.
0.05 max.
I.R.
More than 1,000MΩ
Dielectric
Strength
In accordance with item No.4
Let the capacitor sit at 40T2D and relative humidity of 90 to 95%
for 500 W24
Y00 hrs.
Remove and let sit for 24T2 hrs. at room condition*, then
measure.
#Pretreatment
Perform a heat treatment at 150 W00
Y10 D for 60T5 min. and then
let sit for 24T2 hrs. at room condition*.
* "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
181
12
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Specifications and Test Methods
Continued from the preceding page.
No.
17
Specifications
Item
Life
Appearance
No marking defects
Capacitance
Change
Within T20%
D.F.
0.05 max.
I.R.
More than 2,000MΩ
Dielectric
Strength
In accordance with item No.4
Test Method
Apply 110% of the rated voltage for 1,000 W48
Y00 hrs. at maximum
operating temperature T3D. Remove and let sit for 24T2 hrs. at
room condition*, then measure.
The charge/discharge current is less than 50mA.
#Pretreatment
Apply test voltage for 60T5 min. at test temperature.
Remove and let sit for 24T2 hrs. at room condition*.
* "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
12
182
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Monolithic Ceramic Capacitors
Only for Camera Flash Circuit
0.3 min.
g
0.3 min.
■ Features
T
1. Suitable for the trigger of the flash circuit,
because real capacitance is stable during
operating voltage.
2. The thin type fit for thinner camera.
3. Sn-plated external electrodes realizes good
solderability.
4. For flow and reflow soldering
L
Part Number
GR731A
GR731B
GR731C
■ Applications
For strobe circuit
L
3.2 ±0.2
W
Dimensions (mm)
W
T
1.0 +0, -0.3
1.6 ±0.2
1.25 +0, -0.3
1.6 ±0.2
g min.
1.2
Electrode g
min.
(mm)
Electrode e
(mm)
1.0
1.2
0.3 min.
1.6
1.0
1.2
0.3 min.
1.6
1.25
1.2
0.3 min.
3.2
1.6
1.25
1.2
0.3 min.
3.2
1.6
1.6
1.2
0.3 min.
Part Number
Rated Voltage
(V)
TC Code
(Standard)
Capacitance
(pF)
Length L Width W Thickness T
(mm)
(mm)
(mm)
GR731AW0BB103KW01D
DC350
-
10000 ±10%
3.2
1.6
GR731AW0BB153KW01D
DC350
-
15000 ±10%
3.2
GR731BW0BB223KW01L
DC350
-
22000 ±10%
3.2
GR731BW0BB333KW01L
DC350
-
33000 ±10%
GR731CW0BB473KW03L
DC350
-
47000 ±10%
13
183
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Specifications and Test Methods
Specifications
No.
Item
Test Method
1
Operating
Temperature Range
Y55 to W125D
2
Appearance
No defects or abnormalities
Visual inspection
3
Dimensions
Within the specified dimensions
Using calipers
4
Dielectric Strength
No defects or abnormalities
No failure should be observed when DC500V is applied between
the terminations for 1 to 5 sec., provided the charge/discharge
current is less than 50mA.
5
Insulation Resistance
(I.R.)
CU0.01µF: More than 100MΩ • µF
CF0.01µF: More than 10,000MΩ
The insulation resistance should be measured with DC250T50V
and within 60T5 sec. of charging.
6
Capacitance
Within the specified tolerance
7
Dissipation
Factor (D.F.)
0.025 max.
Y
The capacitance/D.F. should be measured at a frequency of
1T0.2kHz and a voltage of AC1T0.2V(r.m.s.)
The capacitance measurement should be made at each step
specified in Table.
8
Capacitance
Temperature
Characteristics
Cap. Change
Within T10% (Apply DC350V bias)
Within W22
Y33 % (No DC bias)
(Temp. Range : Y55 to W125D)
Step
1
2
3
4
5
Temperature (D)
25T2
Min. Operating Temp.T3
25T2
Max. Operating Temp.T2
25T2
#Pretreatment
Perform a heat treatment at 150 W0
Y10 D for 60T5 min. and then
let sit for 24T2 hrs. at room condition*.
9
Adhesive Strength
of Termination
No removal of the terminations or other defect should occur.
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 1.
Then apply 10N force in the direction of the arrow.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
10N, 10T1s
Glass Epoxy Board
Fig. 1
Appearance
No defects or abnormalities
Capacitance
Within the specified tolerance
D.F.
0.025 max.
13
10
Vibration
Resistance
Solder the capacitor to the test jig (glass epoxy board).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should be
traversed in approximately 1 min. This motion should be applied
for a period of 2 hrs. in each of 3 mutually perpendicular
directions (total of 6 hrs.).
Solder resist
Cu
Glass Epoxy Board
* "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
184
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Specifications and Test Methods
Continued from the preceding page.
No.
Specifications
Item
Test Method
No cracking or marking defects should occur.
b
VZ[§«¬TX¥©°±­¨_`\W®«ª¦]ZYUSTW¤¥¨¢Q,§£VR^¯
[¬
Y]^ª®¯Z«
φ4.5
40
d
c
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 2.
Then apply a force in the direction shown in Fig. 3.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
20 50 Pressurizing
speed: 1.0mm/s
Pressurize
a
11
Deflection
100
LZW
(mm)
3.2Z1.6
t : 1.6
Dimension (mm)
b
c
5.0
2.0
a
2.2
R230
d
1.0
Flexure=1
Capacitance meter
Fig. 2
45
45
(in mm)
Fig. 3
12
Solderability of
Termination
Resistance
13 to Soldering
Heat
14
75% of the terminations are to be soldered evenly and continuously.
Appearance
No marking defects
Capacitance
Change
Within T10%
D.F.
0.025 max.
I.R.
CU0.01µF: More than 100MΩ • µF
CF0.01µF: More than 10,000MΩ
Dielectric
Strength
In accordance with item No.4
Appearance
No marking defects
Capacitance
Change
Within T7.5%
D.F.
0.025 max.
I.R.
CU0.01µF: More than 100MΩ • µF
CF0.01µF: More than 10,000MΩ
Temperature
Cycle
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion).
Immerse in solder solution for 2T0.5 sec.
Immersing speed: 25T2.5mm/s
Temp. of solder: 245T5°C Lead Free Solder (Sn-3.0Ag-0.5Cu)
235T5°C H60A or H63A Eutectic Solder
Preheat the capacitor at 120 to 150D* for 1 min.
Immerse the capacitor in solder solution at 260T5D for 10T1
sec. Let sit at room condition* for 24T2 hrs., then measure.
#Immersing speed: 25T2.5mm/s
#Pretreatment
Perform a heat treatment at 150 W00
Y10 D for 60T5 min. and then
let sit for 24T2 hrs. at room condition*.
Fix the capacitor to the supporting jig (glass epoxy board) shown
in Fig. 4.
Perform the 5 cycles according to the 4 heat treatments listed in
the following table.
Let sit for 24T2 hrs. at room condition*, then measure.
Time (min.)
Temperature (D)
Step
1
Min. Operating Temp.T3
30T3
2
Room Temp.
2 to 3
3
Max. Operating Temp.T2
30T3
4
Room Temp.
2 to 3
#Pretreatment
Perform a heat treatment at 150 W00
Y10 D for 60T5 min. and then
let sit for 24T2 hrs. at room condition*.
Dielectric
Strength
In accordance with item No.4
Solder resist
Cu
Glass Epoxy Board
Fig. 4
15
Humidity
(Steady
State)
Appearance
No marking defects
Capacitance
Change
Within T15%
D.F.
0.05 max.
I.R.
CU0.01µF: More than 10MΩ • µF
CF0.01µF: More than 1,000MΩ
Dielectric
Strength
In accordance with item No.4
Let the capacitor sit at 40T2D and relative humidity of 90 to 95%
for 500 W24
Y00 hrs.
Remove and let sit for 24T2 hrs. at room condition*, then
measure.
#Pretreatment
Perform a heat treatment at 150 W00
Y10 D for 60T5 min. and then
let sit for 24T2 hrs. at room condition*.
* "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
185
13
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Specifications and Test Methods
Continued from the preceding page.
No.
16
17
Specifications
Item
Life
Humidity
Loading
Appearance
No marking defects
Capacitance
Change
Within T15%
D.F.
0.05 max.
I.R.
CU0.01µF: More than 10MΩ • µF
CF0.01µF: More than 1,000MΩ
Dielectric
Strength
In accordance with item No.4
Appearance
No marking defects
Capacitance
Change
Within T15%
D.F.
0.05 max.
I.R.
CU0.01µF: More than 10MΩ • µF
CF0.01µF: More than 1,000MΩ
Dielectric
Strength
In accordance with item No.4
Test Method
Apply DC350V for 1,000 W48
Y00 hrs. at maximum operating
temperature T3D. Remove and let sit for 24T2 hrs. at room
condition*, then measure.
The charge/discharge current is less than 50mA.
#Pretreatment
Apply test voltage for 60T5 min. at test temperature.
Remove and let sit for 24T2 hrs. at room condition*.
Apply the rated voltage at 40T2D and relative humidity of 90 to
95% for 500 W24
Y00 hrs.
Remove and let sit for 24T2 hrs. at room condition*, then
measure.
#Pretreatment
Apply test voltage for 60T5 min. at test temperature.
Remove and let sit for 24T2 hrs. at room condition*.
* "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
13
186
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Monolithic Ceramic Capacitors
AC250V (r.m.s.) Type (Which Meet Japanese Law)
e
g
e
■ Features
T
1. Chip monolithic ceramic capacitor for AC lines.
2. A new monolithic structure for small, high
capacitance capable of operating at high voltage
levels.
3. Sn-plated external electrodes realizes good
solderability.
4. Only for reflow soldering
5. Capacitance 0.01 to 0.1uF for connecting lines and
470 to 4700pF for connecting lines to earth.
L
Part Number
GA242Q
GA243D
GA243Q
GA255D
L
4.5 ±0.3
4.5 ±0.4
5.7 ±0.4
W
Dimensions (mm)
W
T
e min.
2.0 ±0.2 1.5 +0, -0.3
2.0 +0, -0.3
3.2 ±0.3
0.3
1.5 +0, -0.3
5.0 ±0.4 2.0 +0, -0.3
g min.
2.5
3.2
■ Applications
Noise suppression filters for switching power supplies,
telephones, facsimiles, modems.
■ Reference Standard
GA2 series obtains no safety approval.
This series is based on the standards of the
electrical appliance and material safety law of Japan
(separated table 4).
Electrode g
min.
(mm)
Electrode e
(mm)
1.5
2.5
0.3 min.
1.5
2.5
0.3 min.
3.2
1.5
2.5
0.3 min.
3.2
1.5
2.5
0.3 min.
4.5
3.2
2.0
2.5
0.3 min.
10000pF ±20%
4.5
3.2
1.5
2.5
0.3 min.
X7R (EIA)
22000pF ±20%
4.5
3.2
1.5
2.5
0.3 min.
AC250 (r.m.s.)
X7R (EIA)
47000pF ±20%
4.5
3.2
2.0
2.5
0.3 min.
AC250 (r.m.s.)
X7R (EIA)
0.10µF ±20%
5.7
5.0
2.0
3.2
0.3 min.
Part Number
Rated Voltage
(V)
TC Code
(Standard)
GA242QR7E2471MW01L
AC250 (r.m.s.)
X7R (EIA)
470pF ±20%
4.5
2.0
GA242QR7E2102MW01L
AC250 (r.m.s.)
X7R (EIA)
1000pF ±20%
4.5
2.0
GA243QR7E2222MW01L
AC250 (r.m.s.)
X7R (EIA)
2200pF ±20%
4.5
GA243QR7E2332MW01L
AC250 (r.m.s.)
X7R (EIA)
3300pF ±20%
4.5
GA243DR7E2472MW01L
AC250 (r.m.s.)
X7R (EIA)
4700pF ±20%
GA243QR7E2103MW01L
AC250 (r.m.s.)
X7R (EIA)
GA243QR7E2223MW01L
AC250 (r.m.s.)
GA243DR7E2473MW01L
GA255DR7E2104MW01L
Capacitance
Length L Width W Thickness T
(mm)
(mm)
(mm)
14
187
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Specifications and Test Methods
Specifications
No.
Item
Test Method
1
Operating
Temperature Range
Y55 to W125D
2
Appearance
No defects or abnormalities
Visual inspection
3
Dimensions
Within the specified dimensions
Using calipers
Y
4
Dielectric Strength
No defects or abnormalities
No failure should be observed when voltage in table is applied
between the terminations for 60T1 sec., provided the
charge/discharge current is less than 50mA.
Nominal Capacitance
Test Voltage
CU10,000pF
AC575V (r.m.s.)
CF10,000pF
AC1500V (r.m.s.)
5
Insulation Resistance
(I.R.)
More than 2,000MΩ
The insulation resistance should be measured with DC500T50V
and within 60T5 sec. of charging.
6
Capacitance
Within the specified tolerance
7
Dissipation
Factor (D.F.)
0.025 max.
The capacitance/D.F. should be measured at a frequency of
1T0.2kHz and a voltage of AC1T0.2V (r.m.s.)
The capacitance measurement should be made at each step
specified in Table.
8
Capacitance
Temperature
Characteristics
Cap. Change
Within T15%
(Temp. Range: Y55 to W125D)
Step
1
2
3
4
5
Temperature (D)
25T2
Min. Operating Temp.T3
25T2
Max. Operating Temp.T2
25T2
#Pretreatment
Perform a heat treatment at 150 W00
Y10 D for 60T5 min. and then
let sit for 24T2 hrs. at room condition*.
As in Fig., discharge is made 50 times at 5 sec. intervals from
the capacitor (Cd) charged at DC voltage of specified.
9
Discharge
Test
(Application:
Nominal
Capacitance
CF10,000pF)
R3
Appearance
R1
No defects or abnormalities
10kV
V
Ct
R2
Cd
Ct: Capacitor under test Cd: 0.001µF
R1: 1,000Ω R2: 100MΩ R3: Surge resistance
14
10
Adhesive Strength
of Termination
No removal of the terminations or other defects should occur.
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 1.
Then apply 10N force in the direction of the arrow. The soldering
should be done using the reflow method and should be
conducted with care so that the soldering is uniform and free of
defects such as heat shock.
10N, 10T1s
Glass Epoxy Board
Fig. 1
11
Appearance
No defects or abnormalities
Capacitance
Within the specified tolerance
D.F.
0.025 max.
Vibration
Resistance
Solder the capacitor to the test jig (glass epoxy board).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should be
traversed in approximately 1 min. This motion should be applied
for a period of 2 hrs. in each of 3 mutually perpendicular
directions (total of 6 hrs.).
Solder resist
Cu
Glass Epoxy Board
* "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
188
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Specifications and Test Methods
Continued from the preceding page.
No.
Specifications
Item
Test Method
No cracking or marking defects should occur.
b
VZ[§«¬TX¥©°±­¨_`\W®«ª¦]ZYUSTW¤¥¨^¯
V[§¬¢Q,£R
Y]^ª®¯Z«
φ4.5
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 2.
Then apply a force in the direction shown in Fig. 3. The soldering
should be done using the reflow method and should be
conducted with care so that the soldering is uniform and free of
defects such as heat shock.
d
12
Deflection
20 50 Pressurizing
speed: 1.0mm/s
Pressurize
40
c
a
100
LZW
(mm)
4.5Z2.0
4.5Z3.2
5.7Z5.0
Dimension (mm)
b
c
2.4
7.0
3.7
7.0
5.6
8.0
a
3.5
3.5
4.5
R230
t : 1.6
Flexure=1
d
Capacitance meter
45
45
(in mm)
1.0
Fig. 3
Fig. 2
13
14
Solderability of
Termination
Humidity
Insulation
Resistance
15 to Soldering
Heat
16
75% of the terminations are to be soldered evenly and continuously.
Appearance
No marking defects
Capacitance
Change
Within T15%
D.F.
0.05 max.
I.R.
More than 1,000MΩ
Dielectric
Strength
In accordance with item No.4
Appearance
No marking defects
Capacitance
Change
Within T10%
D.F.
0.025 max.
I.R.
More than 2,000MΩ
Dielectric
Strength
In accordance with item No.4
Appearance
No marking defects
Capacitance
Change
Within T15%
D.F.
0.05 max.
I.R.
More than 2,000MΩ
Temperature
Cycle
Dielectric
Strength
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion).
Immerse in solder solution for 2T0.5 sec.
Immersing speed: 25T2.5mm/s
Temp. of solder: 245T5°C Lead Free Solder (Sn-3.0Ag-0.5Cu)
235T5°C H60A or H63A Eutectic Solder
The capacitor should be subjected to 40T2D, relative humidity of
90 to 98% for 8 hrs., and then removed in room condition* for 16
hrs. until 5 cycles.
Preheat the capacitor as table.
Immerse the capacitor in solder solution at 260T5D for 10T1
sec. Let sit at room condition* for 24T2 hrs., then measure.
#Immersing speed: 25T2.5mm/s
#Pretreatment
Perform a heat treatment at 150 W00
Y10 D for 60T5 min. and then
let sit for 24T2 hrs. at room condition*.
*Preheating
Step
1
2
Temperature
100 to 120D
170 to 200D
Time
1 min.
1 min.
Fix the capacitor to the supporting jig (glass epoxy board) shown
in Fig. 4.
Perform the 5 cycles according to the 4 heat treatments listed in
the following table.
Let sit for 24T2 hrs. at room condition*, then measure.
Time (min.)
Temperature (D)
Step
1
Min. Operating Temp.T3
30T3
2
Room Temp.
2 to 3
3
Max. Operating Temp.T2
30T3
4
Room Temp.
2 to 3
#Pretreatment
Perform a heat treatment at 150 W00
Y10 D for 60T5 min. and then
let sit for 24T2 hrs. at room condition*.
In accordance with item No.4
Solder resist
Cu
Glass Epoxy Board
Fig. 4
* "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
189
14
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Specifications and Test Methods
Continued from the preceding page.
No.
17
18
19
Specifications
Item
Humidity
(Steady
State)
Life
Humidity
Loading
Appearance
No marking defects
Capacitance
Change
Within T15%
D.F.
0.05 max.
I.R.
More than 1,000MΩ
Dielectric
Strength
In accordance with item No.4
Appearance
No marking defects
Capacitance
Change
Within T20%
D.F.
0.05 max.
I.R.
More than 1,000MΩ
Test Method
Let the capacitor sit at 40T2D and relative humidity of 90 to 95%
for 500 W24
Y00 hrs.
Remove and let sit for 24T2 hrs. at room condition*, then
measure.
#Pretreatment
Perform a heat treatment at 150 W00
Y10 D for 60T5 min. and then
let sit for 24T2 hrs. at room condition*.
Apply voltage and time as Table at maximum operating temperature
T3D. Remove and let sit for 24T2 hrs. at room condition*, then
measure. The charge / discharge current is less than 50mA.
Nominal Capacitance
Test Voltage
Test Time
CU10,000pF
1,000W48
Y10 hrs. AC300V (r.m.s.)
W48
CF10,000pF
1,500 Y10 hrs. AC500V (r.m.s.) *
* Except that once each hour the voltage is increased to
AC1,000V (r.m.s.) for 0.1 sec.
Dielectric
Strength
In accordance with item No.4
Appearance
No marking defects
Capacitance
Change
Within T15%
D.F.
0.05 max.
I.R.
More than 1,000MΩ
Dielectric
Strength
In accordance with item No.4
#Pretreatment
Apply test voltage for 60T5 min. at test temperature.
Remove and let sit for 24T2 hrs. at room condition*.
Apply the rated voltage at 40T2D and relative humidity of 90 to
95% for 500 W24
Y00 hrs.
Remove and let sit for 24T2 hrs. at room condition*, then
measure.
#Pretreatment
Apply test voltage for 60T5 min. at test temperature.
Remove and let sit for 24T2 hrs. at room condition*.
* "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
14
190
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Monolithic Ceramic Capacitors
Safety Standard Recognized Type GC (UL, IEC60384-14 Class X1/Y2)
e
■ Features
e
T
1. Chip monolithic ceramic capacitor (certified as
conforming to safety standards) for AC lines.
2. A new monolithic structure for small, high
capacitance capable of operating at high voltage
levels.
3. Compared to lead type capacitors, this new
capacitor is greatly downsized and low-profiled to
1/10 or less in volume, and 1/4 or less in height.
4. The type GC can be used as an X1-class and Y2-class
capacitor, line-by-pass capacitor of UL1414.
5. +125 degree C guaranteed
6. Only for reflow soldering
g
L
Part Number
GA355D
L
5.7 ±0.4
W
Dimensions (mm)
W
T
e min.
5.0 ±0.4 2.0 ±0.3
0.3
g min.
4.0
■ Standard Recognition
■ Applications
1. Ideal for use as Y capacitor or X capacitor for
various switching power supplies
2. Ideal for modem applications
UL
Standard No.
Class
UL1414
Line By-pass
VDE
IEC 60384-14
EN 60384-14
BSI
EN 60065 (14.2)
IEC 60384-14
EN 60384-14
SEMKO
IEC 60384-14
EN 60384-14
ESTI
EN 60065
IEC 60384-14
Rated Voltage
AC250V
(r.m.s.)
X1, Y2
Electrode g
min.
(mm)
Electrode e
(mm)
2.0
4.0
0.3 min.
2.0
4.0
0.3 min.
5.0
2.0
4.0
0.3 min.
5.0
2.0
4.0
0.3 min.
Part Number
Rated Voltage
(V)
TC Code
(Standard)
Capacitance
(pF)
Length L Width W Thickness T
(mm)
(mm)
(mm)
GA355DR7GC101KY02L
AC250 (r.m.s.)
X7R (EIA)
100 ±10%
5.7
5.0
GA355DR7GC151KY02L
AC250 (r.m.s.)
X7R (EIA)
150 ±10%
5.7
5.0
GA355DR7GC221KY02L
AC250 (r.m.s.)
X7R (EIA)
220 ±10%
5.7
GA355DR7GC331KY02L
AC250 (r.m.s.)
X7R (EIA)
330 ±10%
5.7
15
191
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Monolithic Ceramic Capacitors
Safety Standard Recognized Type GD (IEC60384-14 Class Y3)
e
g
e
■ Features
T
1. Available for equipment based on IEC/EN60950
and UL1950
2. The type GD can be used as a Y3-class capacitor.
3. A new monolithic structure for small, high
capacitance capable of operating at high voltage
levels
4. +125 degree C guaranteed
5. Only for reflow soldering
6. The low-profile type (thickness: 1.5mm max.) is
available. Fit for use on thinner type equipment.
L
Part Number
GA342A
GA342D
GA342Q
GA343D
GA343Q
W
Dimensions (mm)
T
1.0 +0, -0.3
2.0 ±0.2
2.0 ±0.3
1.5 +0, -0.3
2.0 +0, -0.3
3.2 ±0.3
1.5 +0, -0.3
L
W
4.5 ±0.3
4.5 ±0.4
e min. g min.
0.3
2.5
■ Standard Recognition
■ Applications
1. Ideal for use on line filters and couplings for
DAA modems without transformers
2. Ideal for use on line filters for information
equipment
Standard No.
Class
Rated Voltage
Y3
AC250V(r.m.s.)
UL 60950-1
UL
IEC 60384-14
EN 60384-14
SEMKO
Applications
16
Size
Switching power
supplies
4.5×3.2mm and under
Y
Communication
network devices
such as a modem
Electrode g
min.
(mm)
Electrode e
(mm)
2.0
2.5
0.3 min.
2.0
2.5
0.3 min.
2.0
2.0
2.5
0.3 min.
2.0
2.0
2.5
0.3 min.
4.5
2.0
2.0
2.5
0.3 min.
27 ±5%
4.5
2.0
1.0
2.5
0.3 min.
SL (JIS)
33 ±5%
4.5
2.0
1.0
2.5
0.3 min.
AC250 (r.m.s.)
SL (JIS)
39 ±5%
4.5
2.0
1.0
2.5
0.3 min.
AC250 (r.m.s.)
SL (JIS)
47 ±5%
4.5
2.0
1.0
2.5
0.3 min.
GA342A1XGD560JW31L
AC250 (r.m.s.)
SL (JIS)
56 ±5%
4.5
2.0
1.0
2.5
0.3 min.
GA342A1XGD680JW31L
AC250 (r.m.s.)
SL (JIS)
68 ±5%
4.5
2.0
1.0
2.5
0.3 min.
GA342A1XGD820JW31L
AC250 (r.m.s.)
SL (JIS)
82 ±5%
4.5
2.0
1.0
2.5
0.3 min.
GA342QR7GD101KW01L
AC250 (r.m.s.)
X7R (EIA)
100 ±10%
4.5
2.0
1.5
2.5
0.3 min.
GA342QR7GD151KW01L
AC250 (r.m.s.)
X7R (EIA)
150 ±10%
4.5
2.0
1.5
2.5
0.3 min.
GA342QR7GD221KW01L
AC250 (r.m.s.)
X7R (EIA)
220 ±10%
4.5
2.0
1.5
2.5
0.3 min.
GA342QR7GD331KW01L
AC250 (r.m.s.)
X7R (EIA)
330 ±10%
4.5
2.0
1.5
2.5
0.3 min.
GA342QR7GD471KW01L
AC250 (r.m.s.)
X7R (EIA)
470 ±10%
4.5
2.0
1.5
2.5
0.3 min.
GA342QR7GD681KW01L
AC250 (r.m.s.)
X7R (EIA)
680 ±10%
4.5
2.0
1.5
2.5
0.3 min.
GA342QR7GD102KW01L
AC250 (r.m.s.)
X7R (EIA)
1000 ±10%
4.5
2.0
1.5
2.5
0.3 min.
GA342QR7GD152KW01L
AC250 (r.m.s.)
X7R (EIA)
1500 ±10%
4.5
2.0
1.5
2.5
0.3 min.
GA343QR7GD182KW01L
AC250 (r.m.s.)
X7R (EIA)
1800 ±10%
4.5
3.2
1.5
2.5
0.3 min.
GA343QR7GD222KW01L
AC250 (r.m.s.)
X7R (EIA)
2200 ±10%
4.5
3.2
1.5
2.5
0.3 min.
GA343DR7GD472KW01L
AC250 (r.m.s.)
X7R (EIA)
4700 ±10%
4.5
3.2
2.0
2.5
0.3 min.
Part Number
Rated Voltage
(V)
TC Code
(Standard)
Capacitance
(pF)
GA342D1XGD100JY02L
AC250 (r.m.s.)
SL (JIS)
10 ±5%
4.5
2.0
GA342D1XGD120JY02L
AC250 (r.m.s.)
SL (JIS)
12 ±5%
4.5
2.0
GA342D1XGD150JY02L
AC250 (r.m.s.)
SL (JIS)
15 ±5%
4.5
GA342D1XGD180JY02L
AC250 (r.m.s.)
SL (JIS)
18 ±5%
4.5
GA342D1XGD220JY02L
AC250 (r.m.s.)
SL (JIS)
22 ±5%
GA342A1XGD270JW31L
AC250 (r.m.s.)
SL (JIS)
GA342A1XGD330JW31L
AC250 (r.m.s.)
GA342A1XGD390JW31L
GA342A1XGD470JW31L
192
Length L Width W Thickness T
(mm)
(mm)
(mm)
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Monolithic Ceramic Capacitors
Safety Standard Recognized Type GF (IEC60384-14 Class Y2, X1/Y2)
e
g
e
■ Features
T
1. Available for equipment based on IEC/EN60950
and UL1950. Besides, the GA352/355 types are
available for equipment based on IEC/EN60065,
UL1492, and UL6500
2. The type GF can be used as a Y2-class capacitor.
3. A new monolithic structure for small, high
capacitance capable of operating at high voltage
levels
4. +125 degree C guaranteed
5. Only for reflow soldering
6. The low-profile type (thickness: 1.5mm max.) is
available. Fit for use on thinner type equipment.
L
Part Number
L
W
Dimensions (mm)
T
1.0 +0, -0.3
2.0 ±0.2
2.0 ±0.2*
1.5 +0, -0.3
2.8 ±0.3
1.5 +0, -0.3
2.0 +0, -0.3
5.0 ±0.4
1.5 +0, -0.3
W
GA342A
GA342D
4.5 ±0.3
GA342Q
GA352Q
GA355D
5.7 ±0.4
GA355Q
* GA342D1X : 2.0±0.3
e min. g min.
2.5
0.3
4.0
■ Standard Recognition
■ Applications
1. Ideal for use on line filters and couplings for
DAA modems without transformers
2. Ideal for use on line filters for information
equipment
3. Ideal for use as Y capacitor or X capacitor for
various switching power supplies (GA352/355 types
only)
UL
Status of Recognition
Standard
No.
Class
UL1414
X1, Y2
UL 60950-1
Y
Size : 4.5×2.0mm
Rated
Size : 5.7×2.8mm Voltage
and over
Y
Y
Y
VDE
IEC 60384-14 X1, Y2
SEMKO EN 60384-14
Y2
AC250V
(r.m.s.)
Applications
Size
Switching power
supplies
4.5×2.0mm
Y
Communication
network devices
such as a modem
5.7×2.8mm and over
Electrode g
min.
(mm)
Electrode e
(mm)
2.0
2.5
0.3 min.
2.0
2.5
0.3 min.
2.0
2.0
2.5
0.3 min.
2.0
2.0
2.5
0.3 min.
4.5
2.0
2.0
2.5
0.3 min.
27 ±5%
4.5
2.0
1.0
2.5
0.3 min.
SL (JIS)
33 ±5%
4.5
2.0
1.0
2.5
0.3 min.
AC250 (r.m.s.)
SL (JIS)
39 ±5%
4.5
2.0
1.0
2.5
0.3 min.
AC250 (r.m.s.)
SL (JIS)
47 ±5%
4.5
2.0
1.0
2.5
0.3 min.
GA342A1XGF560JW31L
AC250 (r.m.s.)
SL (JIS)
56 ±5%
4.5
2.0
1.0
2.5
0.3 min.
GA342A1XGF680JW31L
AC250 (r.m.s.)
SL (JIS)
68 ±5%
4.5
2.0
1.0
2.5
0.3 min.
GA342A1XGF820JW31L
AC250 (r.m.s.)
SL (JIS)
82 ±5%
4.5
2.0
1.0
2.5
0.3 min.
GA342QR7GF101KW01L
AC250 (r.m.s.)
X7R (EIA)
100 ±10%
4.5
2.0
1.5
2.5
0.3 min.
GA342QR7GF151KW01L
AC250 (r.m.s.)
X7R (EIA)
150 ±10%
4.5
2.0
1.5
2.5
0.3 min.
GA342DR7GF221KW02L
AC250 (r.m.s.)
X7R (EIA)
220 ±10%
4.5
2.0
2.0
2.5
0.3 min.
GA342DR7GF331KW02L
AC250 (r.m.s.)
X7R (EIA)
330 ±10%
4.5
2.0
2.0
2.5
0.3 min.
GA342QR7GF471KW01L
AC250 (r.m.s.)
X7R (EIA)
470 ±10%
4.5
2.0
1.5
2.5
0.3 min.
GA352QR7GF471KW01L
AC250 (r.m.s.)
X7R (EIA)
470 ±10%
5.7
2.8
1.5
4.0
0.3 min.
GA342QR7GF681KW01L
AC250 (r.m.s.)
X7R (EIA)
680 ±10%
4.5
2.0
1.5
2.5
0.3 min.
GA352QR7GF681KW01L
AC250 (r.m.s.)
X7R (EIA)
680 ±10%
5.7
2.8
1.5
4.0
0.3 min.
GA342DR7GF102KW02L
AC250 (r.m.s.)
X7R (EIA)
1000 ±10%
4.5
2.0
2.0
2.5
0.3 min.
GA352QR7GF102KW01L
AC250 (r.m.s.)
X7R (EIA)
1000 ±10%
5.7
2.8
1.5
4.0
0.3 min.
GA352QR7GF152KW01L
AC250 (r.m.s.)
X7R (EIA)
1500 ±10%
5.7
2.8
1.5
4.0
0.3 min.
Rated Voltage
(V)
TC Code
(Standard)
Capacitance
(pF)
GA342D1XGF100JY02L
AC250 (r.m.s.)
SL (JIS)
10 ±5%
4.5
2.0
GA342D1XGF120JY02L
AC250 (r.m.s.)
SL (JIS)
12 ±5%
4.5
2.0
GA342D1XGF150JY02L
AC250 (r.m.s.)
SL (JIS)
15 ±5%
4.5
GA342D1XGF180JY02L
AC250 (r.m.s.)
SL (JIS)
18 ±5%
4.5
GA342D1XGF220JY02L
AC250 (r.m.s.)
SL (JIS)
22 ±5%
GA342A1XGF270JW31L
AC250 (r.m.s.)
SL (JIS)
GA342A1XGF330JW31L
AC250 (r.m.s.)
GA342A1XGF390JW31L
GA342A1XGF470JW31L
Part Number
Length L Width W Thickness T
(mm)
(mm)
(mm)
Continued on the following page.
193
17
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
Electrode g
min.
(mm)
Electrode e
(mm)
1.5
4.0
0.3 min.
1.5
4.0
0.3 min.
5.0
1.5
4.0
0.3 min.
5.0
2.0
4.0
0.3 min.
Part Number
Rated Voltage
(V)
TC Code
(Standard)
Capacitance
(pF)
GA355QR7GF182KW01L
AC250 (r.m.s.)
X7R (EIA)
1800 ±10%
5.7
5.0
GA355QR7GF222KW01L
AC250 (r.m.s.)
X7R (EIA)
2200 ±10%
5.7
5.0
GA355QR7GF332KW01L
AC250 (r.m.s.)
X7R (EIA)
3300 ±10%
5.7
GA355DR7GF472KW01L
AC250 (r.m.s.)
X7R (EIA)
4700 ±10%
5.7
17
194
Length L Width W Thickness T
(mm)
(mm)
(mm)
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Monolithic Ceramic Capacitors
Safety Standard Recognized Type GB (IEC60384-14 Class X2)
e
g
e
■ Features
T
1. The type GB can be used as an X2-class capacitor.
2. Chip monolithic ceramic capacitor (certified as
conforming to safety standards) for AC lines
3. A new monolithic structure for small, high
capacitance capable of operating at high voltage
levels
4. Compared to lead type capacitors, this new
capacitor is greatly downsized and low-profiled to
1/10 or less in volume, and 1/4 or less in height.
5. +125 degree C guaranteed
6. Only for reflow soldering
L
Part Number
GA355Q
GA355D
GA355E
GA355X
L
5.7 ±0.4
W
Dimensions (mm)
W
T
e min.
1.5 +0,-0.3
2.0 +0,-0.3
5.0 ±0.4
0.3
2.5 +0,-0.3
2.9 +0,-0.4
g min.
3.0
■ Standard Recognition
■ Applications
Ideal for use as X capacitor for various switching
power supplies
Standard No.
Class
Rated Voltage
IEC 60384-14
EN 60384-14
X2
AC250V
(r.m.s.)
VDE
SEMKO
ESTI
Electrode g
min.
(mm)
Electrode e
(mm)
1.5
3.0
0.3 min.
1.5
3.0
0.3 min.
5.0
2.0
3.0
0.3 min.
5.0
2.5
3.0
0.3 min.
5.7
5.0
2.5
3.0
0.3 min.
5.7
5.0
2.9
3.0
0.3 min.
Part Number
Rated Voltage
(V)
TC Code
(Standard)
Capacitance
(pF)
Length L Width W Thickness T
(mm)
(mm)
(mm)
GA355QR7GB103KW01L
AC250 (r.m.s.)
X7R (EIA)
10000 ±10%
5.7
5.0
GA355QR7GB153KW01L
AC250 (r.m.s.)
X7R (EIA)
15000 ±10%
5.7
5.0
GA355DR7GB223KW01L
AC250 (r.m.s.)
X7R (EIA)
22000 ±10%
5.7
GA355ER7GB333KW01L
AC250 (r.m.s.)
X7R (EIA)
33000 ±10%
5.7
GA355ER7GB473KW01L
AC250 (r.m.s.)
X7R (EIA)
47000 ±10%
GA355XR7GB563KW06L
AC250 (r.m.s.)
X7R (EIA)
56000 ±10%
18
195
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GA3 Series Specifications and Test Methods
Specifications
No.
Item
Test Method
1
Operating
Temperature Range
Y55 to W125D
2
Appearance
No defects or abnormalities
Visual inspection
3
Dimensions
Within the specified dimensions
Using calipers
Y
4
Dielectric Strength
No defects or abnormalities
No failure should be observed when voltage in table is applied
between the terminations for 60T1 sec., provided the
charge/discharge current is less than 50mA.
Test Voltage
DC1075V
Type GB
AC1500V (r.m.s.)
Type GC/GD/GF
5
Pulse Voltage
(Application: Type
GD/GF)
No self healing breakdowns or flash-overs have taken place in
the capacitor.
10 impulse of alternating polarity is subjected.
(5 impulse for each polarity)
The interval between impulse is 60 sec.
Applied Voltage: 2.5kV zero to peak
6
Insulation Resistance
(I.R.)
More than 6,000MΩ
The insulation resistance should be measured with DC500T50V
and within 60T5 sec. of charging.
7
Capacitance
Within the specified tolerance
8
Dissipation
Factor (D.F.)
Q
Char.
X7R
SL
Specification
D.F.V0.025
QU400W20C*2 (CF30pF)
QU1000
(CU30pF)
The capacitance/Q/D.F. should be measured at a frequency of
1T0.2kHz (SL char.: 1T0.2MHz) and a voltage of
AC1T0.2V (r.m.s.)
The capacitance measurement should be made at each step
specified in Table.
9
Capacitance
Temperature
Characteristics
Char.
Capacitance Change
Within T15%
X7R
Temperature characteristic guarantee is Y55 to W125D
Char.
Temperature Coefficient
W350 to Y1000ppm/D
SL
Temperature characteristic guarantee is W20 to W85D
Appearance
No defects or abnormalities
I.R.
More than 1,000MΩ
Step
1
2
3
4
5
Temperature (D)
25T2 (20T2 for SL char.)
Min. Operating Temp.T3
25T2 (20T2 for SL char.)
Max. Operating Temp.T2
25T2 (20T2 for SL char.)
SL char. :
The capacitance should be measured at even 85D between step
3 and step 4.
#Pretreatment for X7R char.
Perform a heat treatment at 150 W00
Y10 D for 60T5 min. and then
let sit for 24T2 hrs. at room condition*1.
As in Fig., discharge is made 50 times at 5 sec. intervals from
the capacitor (Cd) charged at DC voltage of specified.
R3
10
Discharge
Test
(Application:
Type GC)
Dielectric
Strength
10kV
In accordance with item No.4
R1
V
Ct
R2
Cd
Ct: Capacitor under test Cd: 0.001µF
R1: 1,000Ω R2: 100MΩ R3: Surge resistance
11
Adhesive Strength
of Termination
No removal of the terminations or other defect should occur.
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 1.
Then apply 10N force in the direction of the arrow. The soldering
should be done using the reflow method and should be
conducted with care so that the soldering is uniform and free of
defects such as heat shock.
10N, 10T1s
Glass Epoxy Board
18
Fig. 1
*1 "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
*2 "C" expresses nominal capacitance value (pF).
Continued on the following page.
196
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GA3 Series Specifications and Test Methods
Continued from the preceding page.
No.
12
Specifications
Item
Vibration
Resistance
Appearance
No defects or abnormalities
Capacitance
Within the specified tolerance
D.F.
Q
Char.
X7R
SL
Test Method
Solder the capacitor to the test jig (glass epoxy board).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should be
traversed in approximately 1 min. This motion should be applied
for a period of 2 hrs. in each of 3 mutually perpendicular
directions (total of 6 hrs.).
Specification
D.F.V0.025
QU400W20C*2 (CF30pF)
QU1000
(CU30pF)
Solder resist
Cu
Glass Epoxy Board
No cracking or marking defects should occur.
b
VZ[§«¬TX¥©°±­¨_`\W®«ª¦]ZYUSTW¤¥¨¢Q,§£VR^¯
[¬
Y]^ª®¯Z«
φ4.5
40
d
c
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 2.
Then apply a force in the direction shown in Fig. 3. The soldering
should be done using the reflow method and should be
conducted with care so that the soldering is uniform and free of
defects such as heat shock.
a
13
100
Deflection
LZW
(mm)
4.5Z2.0
4.5Z3.2
5.7Z2.8
5.7Z5.0
Dimension (mm)
b
c
7.0
2.4
7.0
3.7
8.0
3.2
8.0
5.6
a
3.5
3.5
4.5
4.5
20 50 Pressurizing
speed: 1.0mm/s
Pressurize
t : 1.6
R230
d
Flexure=1
1.0
Capacitance meter
45
Fig. 2
14
Solderability of
Termination
Appearance
Resistance
15 to Soldering
Heat
Capacitance
Change
I.R.
75% of the terminations are to be soldered evenly and continuously.
No marking defects
Char.
X7R
SL
Capacitance Change
Within T10%
Within T2.5% or T0.25pF
(Whichever is larger)
45
(in mm)
Fig. 3
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion).
Immerse in solder solution for 2T0.5 sec.
Immersing speed: 25T2.5mm/s
Temp. of solder: 245T5°C Lead Free Solder (Sn-3.0Ag-0.5Cu)
235T5°C H60A or H63A Eutectic Solder
Preheat the capacitor as table. Immerse the capacitor in solder
solution at 260T5D for 10T1 sec. Let sit at room condition*1 for
24T2 hrs., then measure.
#Immersing speed: 25T2.5mm/s
#Pretreatment for X7R char.
Perform a heat treatment at 150 W00
Y10 D for 60T5 min. and then
let sit for 24T2 hrs. at room condition*1.
More than 1,000MΩ
*Preheating
Dielectric
Strength
In accordance with item No.4
Step
1
2
Temperature
100 to 120D
170 to 200D
Time
1 min.
1 min.
*1 "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
*2 "C" expresses nominal capacitance value (pF).
Continued on the following page.
18
197
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GA3 Series Specifications and Test Methods
Continued from the preceding page.
No.
Appearance
Capacitance
Change
16
Specifications
Item
Temperature
Cycle
D.F.
Q
No marking defects
Char.
X7R
SL
Char.
X7R
SL
Capacitance Change
Within T15%
Within T2.5% or T0.25pF
(Whichever is larger)
Specification
D.F.V0.05
QU400W20C*2 (CF30pF)
QU1000
(CU30pF)
I.R.
More than 3,000MΩ
Dielectric
Strength
In accordance with item No.4
Test Method
Fix the capacitor to the supporting jig (glass epoxy board) shown
in Fig. 4.
Perform the 5 cycles according to the 4 heat treatments listed in
the following table.
Let sit for 24T2 hrs. at room condition*1, then measure.
Time (min.)
Temperature (D)
Step
30T3
Min. Operating Temp.T3
1
2 to 3
Room Temp.
2
30T3
Max. Operating Temp.T2
3
2 to 3
Room Temp.
4
#Pretreatment for X7R char.
Perform a heat treatment at 150 W00
Y10 D for 60T5 min. and then
let sit for 24T2 hrs. at room condition*1.
Solder resist
Cu
Glass Epoxy Board
Fig. 4
Appearance
Capacitance
Change
17
Humidity
(Steady
State)
D.F.
Q
Char.
X7R
SL
Char.
X7R
SL
Capacitance Change
Within T15%
Within T5.0% or T0.5pF
(Whichever is larger)
Specification
D.F.V0.05
QU275W5/2C*2 (CF30pF)
QU350
(CU30pF)
I.R.
More than 3,000MΩ
Dielectric
Strength
In accordance with item No.4
Appearance
No marking defects
Capacitance
Change
D.F.
Q
18
No marking defects
Char.
X7R
SL
Char.
X7R
SL
Capacitance Change
Within T20%
Within T3.0% or T0.3pF
(Whichever is larger)
Specification
D.F.V0.05
QU275W5/2C*2 (CF30pF)
QU350
(CU30pF)
Life
I.R.
More than 3,000MΩ
Before this test, the test shown in the following is performed.
·Item 11 Adhesive Strength of Termination (applied force is 5N)
·Item 13 Deflection
Let the capacitor sit at 40T2D and relative humidity of 90 to 95%
for 500 W24
Y00 hrs.
Remove and let sit for 24T2 hrs. at room condition*1, then
measure.
#Pretreatment for X7R char.
Perform a heat treatment at 150 W00
Y10 D for 60T5 min. and then
let sit for 24T2 hrs. at room condition*1.
Before this test, the test shown in the following is performed.
·Item 11 Adhesive Strength of Termination (apply force is 5N)
·Item 13 Deflection
Impulse Voltage
Each individual capacitor should
be subjected to a 2.5kV (Type
GC/GF: 5kV) Impulse (the
voltage value means zero to
peak) for three times. Then the
capacitors are applied to life test.
GB
In accordance with item No.4
100
90
50
(%)
30
0
t
T
T1
T2
Apply voltage as Table for 1,000 hrs. at 125 W2
Y0 D, relative
humidity 50% max.
Type
Dielectric
Strength
Front time (T1)=1.2µs=1.67T
Time to half-value (T2)=50µs
GC
GD
GF
Applied Voltage
AC312.5V (r.m.s.), except that once each hour the
voltage is increased to AC1,000V (r.m.s.) for 0.1 sec.
AC425V (r.m.s.), except that once each hour the
voltage is increased to AC1,000V (r.m.s.) for 0.1 sec.
Let sit for 24T2 hrs. at room condition*1, then measure.
#Pretreatment for X7R char.
Perform a heat treatment at 150 W00
Y10 D for 60T5 min. and then
let sit for 24T2 hrs. at room condition*1.
*1 "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
*2 "C" expresses nominal capacitance value (pF).
18
Continued on the following page.
198
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GA3 Series Specifications and Test Methods
Continued from the preceding page.
No.
Appearance
Capacitance
Change
19
Specifications
Item
Humidity
Loading
D.F.
Q
Test Method
No marking defects
Char.
X7R
SL
Char.
X7R
SL
Capacitance Change
Within T15%
Within T5.0% or T0.5pF
(Whichever is larger)
Specification
D.F.V0.05
QU275W5/2C*2 (CF30pF)
QU350
(CU30pF)
I.R.
More than 3,000MΩ
Dielectric
Strength
In accordance with item No.4
Before this test, the test shown in the following is performed.
·Item 11 Adhesive Strength of Termination (apply force is 5N)
·Item 13 Deflection
Apply the rated voltage at 40T2D and relative humidity of 90 to
95% for 500 W24
Y00 hrs. Remove and let sit for 24T2 hrs. at room
condition*1, then measure.
#Pretreatment for X7R char.
Perform a heat treatment at 150 W00
Y10 D for 60T5 min. and then
let sit for 24T2 hrs. at room condition*1.
The capacitor should be individually wrapped in at least one but
not more than two complete layers of cheesecloth. The
capacitor should be subjected to 20 discharges. The interval
between successive discharges should be 5 sec. The UAC
should be maintained for 2 min. after the last discharge.
F
S1
Tr
S2
C1
UAC
L1
R
L2
C2
C3
L3
Cx
Ct
Ut
L4
Oscilloscope
20
Active
Flammability
The cheesecloth should not be on fire.
C1,2
L1 to 4
Ct
Cx
F
: 1µFT10%
C3
: 0.033µFT5% 10kV
: 1.5mHT20% 16A Rod core choke
: 3µFT5% 10kV
R
: 100ΩT2%
: Capacitor under test
UAC
: URT5%
: Fuse, Rated 16A
UR
: Rated Voltage
Ut
: Voltage applied to Ct
Ux
Type
GB, GD
GC, GF
Ui
Ui
2.5kV
5kV
time
The burning time should not exceed 30 sec.
The tissue paper should not ignite.
Test Specimen
45°
200T5mm
Passive
Flammability
About 8mm
21
The capacitor under test should be held in the flame in the
position which best promotes burning. Each specimen should
only be exposed once to the flame. Time of exposure to flame:
30 sec.
Length of flame : 12T1mm
Gas burner
: Length 35mm min.
Inside Dia. 0.5T0.1mm
Outside Dia. 0.9mm max.
Gas
: Butane gas Purity 95% min.
Tissue
About 10mm Thick Board
*1 "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
*2 "C" expresses nominal capacitance value (pF).
18
199
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GRM/GR4/GR7/GA2/GA3 Series Data (Typical Example)
■ Capacitance - Temperature Characteristics
C0G/U2J/SL Characteristics
X7R Characteristics
20
30
15
20
U2J
X7R Char. Spec.(upper)
5
C0G
SL
0
U2J
C0G
−5
Cap. Change (%)
Cap. Change (%)
10
10
0
-10
−10
SL
−20
−60
X7R Char. Spec.(lower)
-20
−15
−40 −20
0
20
40
60
80
-30
-60
100 120 140
-40
-20
0
20
40
60
80
100 120 140
Temperature (°C)
Temperature (°C)
GR4 Series
20
15
Cap. Change (%)
10
5
0
-5
–10
–15
–20
–60
–40 –20
0
20
40
60
80
100 120 140
Temperature (°C)
■ Impedance - Frequency Characteristics
GRM Series (C0G Char. 630V)
GRM Series (X7R Char. 250V)
10k
1k
1k
100
1000pF
470pF
100
10
Z (Ω)
Z (Ω)
100pF
10
1000pF
100000pF
10000pF
1
1
100m
100m
10m
1M
10M
100M
Frequency (Hz)
1G
10G
10m
1M
10M
100M
1G
Frequency (Hz)
Continued on the following page.
18
200
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GRM/GR4/GR7/GA2/GA3 Series Data (Typical Example)
Continued from the preceding page.
■ Impedance - Frequency Characteristics
GRM Series (X7R Char. 630V)
GR4 Series
1k
1k
100
100
1000pF
100pF
1000pF
10
Z (Ω)
Z (Ω)
10
10000pF
100000pF
4700pF
1
1
100m
100m
10m
1M
10M
100M
Frequency (Hz)
10m
1M
1G
10M
100M
1G
Frequency (Hz)
GR7 Series
GA2 Series
1k
1k
100
100
1000pF
10
Z (Ω)
Z (Ω)
10
10000pF
1
10000pF
100000pF
1
22000pF
100m
10m
1M
100m
10M
100M
1G
Frequency (Hz)
10m
1M
GA3 Series (Type GD)
10M
100M
Frequency (Hz)
1G
GA3 Series (Type GF)
1K
1K
150pF
100
100
1000pF
1000pF
10
Z (Ω)
Z (Ω)
10
2200pF
2200pF
1
1
100m
100m
10m
1M
10M
100M
Frequency (Hz)
1G
10m
1M
10M
100M
1G
Frequency (Hz)
Continued on the following page.
18
201
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GRM/GR4/GR7/GA2/GA3 Series Data (Typical Example)
Continued from the preceding page.
■ Impedance - Frequency Characteristics
GA3 Series (Type GB)
100
10
Z (Ω)
10000pF
1
56000pF
0.1
33000pF
0.01
1M
10M
100M
1G
Frequency (Hz)
■ Capacitance - AC Voltage Characteristics
GA3 Series (Type GD/GF, X7R char.)
GA3 Series (Type GB)
at Room Condition (25°C)
60
60
40
40
20
20
Cap. Change (%)
Cap. Change (%)
at Room Condition (25°C)
0
-20
10000pF
0
33000pF
-20
56000pF
-40
-40
-60
0
100
200
300
AC Voltage [V(r.m.s.)]
18
202
400
500
-60
0
200
400
600
AC Voltage [V(r.m.s.)]
800
1000
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Package
Taping is standard packaging method.
c Minimum Quantity Guide
GRM18
GRM21
GRM31/GR731
Medium Voltage
GRM32
GRM42/GR442
AC250V
ø180mm Reel
L
W
T
Paper Tape
Embossed Tape
1.6
0.8
0.8
4,000
-
1.0
4,000
-
1.25
-
3,000
1.0
4,000
-
1.25
-
3,000
2,000
2.0
3.2
3.2
4.5
1.25
1.6
2.5
2.0
1.6
-
1.0
4,000
-
1.25
-
3,000
1.5
-
2,000
2.0
-
1,000
1.0
-
3,000
1.5
-
2,000
2.0
-
2,000
1.5
-
1,000
GRM43/GR443
4.5
3.2
2.0
-
1,000
2.5
-
500
GRM55/GR455
5.7
5.0
2.0
-
1,000
GA242
4.5
2.0
1.5
-
2,000
GA243
4.5
3.2
GA255
5.7
5.0
GA342
Safety Std.
Recognition
Quantity (pcs.)
Dimensions (mm)
Part Number
4.5
2.0
GA343
4.5
3.2
GA352
5.7
2.8
GA355
5.7
5.0
1.5
-
1,000
2.0
-
1,000
1,000
2.0
-
1.0
-
3,000
1.5
-
2,000
2.0
-
2,000
1.5
-
1,000
2.0
-
1,000
1.5
-
1,000
1.5
-
1,000
2.0
-
1,000
2.5
-
500
2.7
-
500
2.9
-
500
c Tape Carrier Packaging
(1) Appearance of Taping
q Embossed Tape
w Paper Tape
Cover Tape: 0.06mm in thickness
Top Tape: 0.05mm in thickness
Sprocket Hole: As specified in (2)
Sprocket Hole: As specified in (2)
Cavity for Chip: As specified in (2)
Cavity for Chip: As specified in (2)
18
Bottom Tape: 0.05mm in thickness
Base Tape: As specified in (2)
Packed Chips Chip
Base Tape: As specified in (2)
Packed Chips Chip
Continued on the following page.
203
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Package
Continued from the preceding page.
(2) Dimensions of Tape
q Embossed Tape
8mm width 4mm pitch Tape
12mm width 8mm/4mm pitch Tape
W0.1
4.0T0.05
0.25T0.1
Direction of Feed
0.3T0.1
1.75T0.1
1.45
2.25
GRM31/GR731
(TU1.25mm)
2.0
3.6
2.9
3.6
12.0T0.3
5.5T0.05
Direction of Feed
B*
GRM21
(TU1.25mm)
(TU1.25mm)
φ1.5 Y0
A
2.5 max.
A*
GRM32
2.0T0.05
4.0T0.1
8.0T0.3
B
A
Part Number
8.0T0.1*1
1.75T0.1
3.5T0.05
4.0T0.1
2.0T0.05
B
W0.1
φ1.5 Y0
3.7 max.
Part Number
A*
B*
GRM42/GR442/GA242/GA342
2.5
5.1
GRM43/GR443/GA243/GA343
3.6
4.9
GA352
3.2
6.1
GRM55/GR455/GA255/GA355
5.4
6.1
*1 4.0±0.1mm in case of GRM42/GR442/GA242/GA342
*Nominal Value
*Nominal Value
(in mm)
w Paper Tape
(3) Dimensions of Reel
8mm width 4mm pitch Tape
4.0T0.1
2.0T0.05
1.1 max.
1.75T0.1
B
A
13.0T1.0 (Tape width 8mm)
17.0T1.0 (Tape width 12mm)
8.0T0.3
W0.1
φ1.5 Y0
3.5T0.05
4.0T0.1
2.0T0.5
Direction of Feed
180 +0
-1.5
+1
60 -0
φ13T0.2
φ21T0.8
Part Number
18
A*
B*
GRM18
1.05
1.85
GRM21
(T=1.0mm)
1.45
2.25
GRM31/GR731
(T=1.0mm)
2.0
3.6
GRM32
(T=1.0mm)
2.9
3.6
+1.0
9.0 -0 (Tape width 8mm)
*Nominal Value
(in mm)
+1.0
13.0 -0 (Tape width 12mm)
(in mm)
Continued on the following page.
204
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Package
Continued from the preceding page.
(4) Taping Method
q Tapes for capacitors are wound clockwise. The
sprocket holes are to the right as the tape is pulled
toward the user.
w Part of the leader and part of the empty tape should be
attached to the end of the tape as shown at right.
e The top tape or cover tape and base tape are not
attached at the end of the tape for a minimum of 5
pitches.
r Missing capacitors number within 0.1% of the number
per reel or 1 pc, whichever is greater, and are not
continuous.
t The top tape or cover tape and bottom tape should not
protrude beyond the edges of the tape and should not
cover sprocket holes.
y Cumulative tolerance of sprocket holes, 10 pitches:
T0.3mm.
u Peeling off force: 0.1 to 0.6N in the direction shown at
right.
Vacant section
Chip mounting unit Vacant section
160 min.
160 min.
400 to 560
Direction of feed
(Top Tape or Cover Tape alone)
(in mm)
165 to
180°
Top Tape or Cover Tape
Base Tape
18
205
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Caution
■ Storage and Operating Conditions
Operating and storage environment
Do not use or store capacitors in a corrosive
atmosphere, especially where chloride gas, sulfide
gas, acid, alkali, salt or the like are present. And
avoid exposure to moisture. Before cleaning, bonding
or molding this product, verify that these processes
do not affect product quality by testing the
performance of a cleaned, bonded or molded product
in the intended equipment. Store the capacitors
where the temperature and relative humidity do not
exceed 5 to 40 degrees centigrade and 20 to 70%.
■ Handling
1. Vibration and impact
Do not expose a capacitor to excessive shock or
vibration during use.
2. Do not directly touch the chip capacitor, especially
the ceramic body. Residue from hands/fingers may
create a short circuit environment.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
18
206
Use capacitors within 6 months after delivered.
Check the solderability after 6 months or more.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Caution
■ Caution (Rating)
1. Operating Voltage
When DC-rated capacitors are to be used in AC or ripple
current circuits, be sure to maintain the Vp-p value of the
applied voltage or the Vo-p which contains DC bias within
the rated voltage range.
When the voltage is applied to the circuit, starting or
stopping may generate irregular voltage for a transit
period because of resonance or switching. Be sure to use
a capacitor with a rated voltage range that includes these
irregular voltages.
When DC-rated capacitors are to be used in input circuits
from commercial power source (AC filter), be sure to use
Safety Recognized Capacitors because various
regulations on withstand voltage or impulse withstand
established for each equipment should be taken into
considerations.
Voltage
Positional
Measurement
DC Voltage
V0-p
DC+AC Voltage
V0-p
AC Voltage
Vp-p
Pulse Voltage (1)
Vp-p
Pulse Voltage (2)
Vp-p
2. Operating Temperature, Self-generated Heat, and
Load Reduction at High-frequency Voltage Condition
Keep the surface temperature of a capacitor below the
upper limit of its rated operating temperature range.
Be sure to take into account the heat generated by the
capacitor itself. When the capacitor is used in a highfrequency voltage, pulse voltage, it may self-generate
heat due to dielectric loss.
(1) In case of X7R char.
Applied voltage should be the load such as selfgenerated heat is within 20°C on the condition of
atmosphere temperature 25°C. When measuring, use a
thermocouple of small thermal capacity -K of ø0.1mm
in conditions where the capacitor is not affected by
radiant heat from other components or surrounding
ambient fluctuations. Excessive heat may lead to
deterioration of the capacitor's characteristics and
reliability. (Never attempt to perform measurement
with the cooling fan running. Otherwise, accurate
measurement cannot be ensured.)
Continued on the following page.
18
207
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Caution
Continued from the preceding page.
(2) In case of C0G, U2J char.
Due to the low self-heating characteristics of lowdissipation capacitors, the allowable electric power of
these capacitors is generally much higher than that of
X7R characteristic capacitors.
When a high frequency voltage which cause 20°C self
heating to the capacitor is applied, it will exceed
capacitor's allowable electric power.
The frequency of the applied sine wave voltage should be
less than 500kHz (less than 100kHz in case of rated
voltage: DC3.15kV). The applied voltage should be less
than the value shown in figure below.
While, in case of non-sine wave which include a
harmonic frequency, please contact our sales
representatives or product engineers. Excessive heat
may lead to deterioration of the capacitor's characteristics
and reliability. (Never attempt to perform measurement
with the cooling fan running. Otherwise, accurate
measurement cannot be ensured.)
<C0G char., Rated Voltage: DC3.15kV>
The capacitors less than 22pF can be applied maximum
4.0kV peak to peak at 100kHz or less only for the ballast
or the resonance usage in the LCD backlight inverter
circuit.
<Capacitor Selection Tool>
We are also offering free software the "capacitor
selection tool: Murata Medium Voltage Capacitors
Selection Tool by Voltage Form (*)" which will assist you
in selecting a suitable capacitor.
The software can be downloaded from Murata's Internet
Website.
(http://www.murata.com/designlib/mmcsv_e.html).
By inputting capacitance values and applied voltage
waveform of the specific capacitor series, this software
will calculate the capacitor's power consumption and list
suitable capacitors (non-sine wave is also available).
* Subject series are below.
· Temperature Characteristics C0G, U2J
The temperature of the surface
of capacitor: 125˚C or less (including self-heating)
C0G char., Rated Voltage: DC630V
680pF
820pF
1000pF
1
10
100
Frequency [kHz]
to 22pF
27 to 47pF
(3150)
1000
1
1000
U2J char., Rated Voltage: DC250V
to 4,700pF
(250)
10,000pF
1
10
100
Frequency [kHz]
Allowable voltage [Vp-p]
Allowable voltage [Vp-p]
1000
100
U2J char., Rated Voltage: DC2kV
10
100
Frequency [kHz]
(500)1000
1000
100
1
10
100
Frequency [kHz]
(500)1000
U2J char., Rated Voltage: DC3.15kV
to 100pF
150pF
220pF
1
10
100
Frequency [kHz]
(500)1000
Allowable voltage [Vp-p]
Allowable voltage [Vp-p]
1
to 470pF
10000
1000
100
1,000pF
2,200pF
(500)1000
U2J char., Rated Voltage: DC1kV
10000
to 680pF
(630)
10000
18
1000
U2J char., Rated Voltage: DC630V
1000
100
10
100
Frequency [kHz]
Allowable voltage [Vp-p]
560pF
(630)
100
C0G char., Rated Voltage: DC3.15kV
10000
100 to 470pF
Allowable voltage [Vp-p]
Allowable voltage [Vp-p]
1000
to 33pF
47pF
100pF
(3150)
1000
1
10
100
Frequency [kHz]
1000
The sine-wave frequency VS allowable voltage
Continued on the following page.
208
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Caution
Continued from the preceding page.
3. Fail-safe
Failure of a capacitor may result in a short circuit. Be sure
to provide an appropriate fail-safe function such as a fuse
on your product to help eliminate possible electric shock,
fire, or fumes.
Please consider using fuses on each AC line if the
capacitors are used between the AC input lines and earth
(line bypass capacitors), to prepare for the worst case,
such as a short circuit.
FUSE
AC IN
4. Test Condition for AC Withstanding Voltage
(1) Test Equipment
Tests for AC withstanding voltage should be made with
equipment capable of creating a wave similar to a
50/60 Hz sine wave.
If the distorted sine wave or overload exceeding the
specified voltage value is applied, a defect may be
caused.
(2) Voltage Applied Method
The capacitor's leads or terminals should be firmly
connected to the output of the withstanding voltage test
equipment, and then the voltage should be raised from
near zero to the test voltage. If the test voltage is applied
directly to the capacitor without raising it from near zero,
it should be applied with the zero cross*. At the end of the
test time, the test voltage should be reduced to near zero,
and then the capacitor's leads or terminals should be
taken off the output of the withstanding voltage test
equipment. If the test voltage is applied directly to the
capacitor without raising it from near zero, surge voltage
may occur and cause a defect.
Voltage sine wave
*ZERO CROSS is the point where voltage sine wave
pass 0V.
- See the figure at right -
0V
zero cross
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT AND
CAUSE FUMING OR PARTIAL DISPERSION WHEN THE
PRODUCT IS USED.
18
209
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Caution
Caution (Soldering and Mounting)
1. Vibration and Impact
Do not expose a capacitor to excessive shock or vibration
during use.
2. Circuit Board Material
It is possible for the chip to crack by the expansion and
shrinkage of a metal board.
Please contact us if you want to use our ceramic
capacitors on a metal board such as Aluminum.
3. Land Layout for Cropping PC Board
Choose a mounting position that minimizes the stress imposed on the chip during flexing or bending of the board.
[Component Direction]
[Chip Mounting Close to Board Separation Point]
Locate chip
horizontal to the
direction in which
stress acts.
<Example
to be avoided>
<Examples
of improvements>
C
Perforation
B
D
A
Chip arrangement
Worst AGCGB~D Best
Slit
Continued on the following page.
18
210
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Caution
Continued from the preceding page.
4. Reflow Soldering
When sudden heat is given to the components, the
mechanical strength of the components should go down
because remarkable temperature change causes
deformity of components inside. In order to prevent
mechanical damage in the components, preheating
should be required for both of the components and the
PCB board. Preheating conditions are shown in Table 1.
It is required to keep temperature differential between the
soldering and the components surface (∆T) as small as
possible.
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
When components are immersed in solvent after
mounting, be sure to maintain the temperature difference
(∆T) between the component and solvent within the
range shown in the Table 1.
[Standard Conditions for Reflow Soldering]
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
Infrared Reflow
Temperature (D)
Soldering
Peak Temperature
Gradual
Cooling
200°C
∆T
170°C
150°C
130°C
Preheating
Time
60-120 seconds 30-60 seconds
Vapor Reflow
Temperature (D)
Soldering
Peak Temperature
Gradual
Cooling
∆T
170°C
150°C
130°C
Table 1
Part Number
Preheating
Temperature Differential
G--18/21/31
∆TV190D
G--32/42/43/52/55
∆TV130D
60-120 seconds
Recommended Conditions
Lead Free Solder
Peak Temperature
230-250°C
230-240°C
240-260°C
Atmosphere
Air
Air
Air or N2
Pb-Sn Solder: Sn-37Pb
Lead Free Solder: Sn-3.0Ag-0.5Cu
[Allowable Soldering Temperature and Time]
Soldering Temperature (D)
Pb-Sn Solder
Infrared Reflow Vapor Reflow
Time
20 seconds max.
270
260
250
240
230
0
30
60
90
Soldering Time (sec.)
In case of repeated soldering, the accumulated
soldering time must be within the range shown above.
Optimum Solder Amount for Reflow Soldering
Overly thick application of solder paste results in
excessive fillet height solder.
This makes the chip more susceptible to mechanical and
thermal stress on the board and may cause cracked
chips.
Too little solder paste results in a lack of adhesive
strength on the outer electrode, which may result in chips
breaking loose from the PCB.
Make sure the solder has been applied smoothly to the
end surface to a height of 0.2mm min.
[Optimum Solder Amount for Reflow Soldering]
0.2mm min.
in section
18
Inverting the PCB
Make sure not to impose an abnormal mechanical shock on
the PCB.
Continued on the following page.
211
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Caution
Continued from the preceding page.
5. Flow Soldering
Table 2
,,,
,,,
,,,
,,,
,,,
,,,
[Standard Conditions for Flow Soldering]
Temperature (D)
Soldering
Peak Temperature
∆T
Preheating
60-120 seconds
Temperature Differential
Time
5 seconds max.
[Allowable Soldering Temperature and Time]
270
260
250
240
230
0
Part Number
Gradual
Cooling
170°C
150°C
130°C
Soldering Temperature (D)
When sudden heat is given to the components, the
mechanical strength of the components should go down
because remarkable temperature change causes
deformity of components inside. And an excessively long
soldering time or high soldering temperature results in
leaching by the outer electrodes, causing poor adhesion
or a reduction in capacitance value due to loss of contact
between electrodes and end termination.
In order to prevent mechanical damage in the
components, preheating should be required for both of
the components and the PCB board. Preheating
conditions are shown in Table 2. It is required to keep
temperature differential between the soldering and the
components surface (∆T) as small as possible.
When components are immersed in solvent after
mounting, be sure to maintain the temperature difference
between the component and solvent within the range
shown in Table 2.
Do not apply flow soldering to chips not listed in Table 2.
10
20
30
Soldering Time (sec.)
∆TV150D
G--18/21/31
In case of repeated soldering, the accumulated
soldering time must be within the range shown above.
Recommended Conditions
Pb-Sn Solder
Lead Free Solder
Peak Temperature
240-250°C
250-260°C
Atmosphere
Air
N2
Pb-Sn Solder: Sn-37Pb
Lead Free Solder: Sn-3.0Ag-0.5Cu
Optimum Solder Amount for Flow Soldering
The top of the solder fillet should be lower than the
thickness of components. If the solder amount is
excessively big, the risk of cracking is higher during
board bending or under any other stressful conditions.
Up to Chip Thickness
Adhesive
in section
Continued on the following page.
18
212
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Caution
Continued from the preceding page.
6. Correction with a Soldering Iron
When sudden heat is applied to the components by use
of a soldering iron, the mechanical strength of the
components will go down because the extreme
temperature change causes deformations inside the
components.
In order to prevent mechanical damage to the
components, preheating is required for both the
components and the PCB board.
Preheating conditions, (The "Temperature of the
Soldering Iron Tip", "Preheating Temperature",
"Temperature Differential" between iron tip and the
components and the PCB), should be within the
conditions of table 3.
It is required to keep the temperature differential between
the soldering Iron and the components surface (∆T) as
small as possible.
After soldering, do not allow the component/PCB to cool
down rapidly.
The operating time for the re-working should be as short
as possible. When re-working time is too long, it may
cause solder leaching, and that will cause a reduction of
the adhesive strength of the terminations.
Table 3
Part Number
Temperature Preheating Temperature
of Soldering
Differential Atmosphere
Temperature
Iron tip
(∆T)
G--18/21/31
350°C max. 150°C min.
∆TV190D
air
G--32/42/43/
52/55
280°C max. 150°C min.
∆TV130D
air
*Applicable for both Pb-Sn and Lead Free Solder.
Pb-Sn Solder: Sn-37Pb
Lead Free Solder: Sn-3.0Ag-0.5Cu
Optimum Solder Amount when re-working Using a
Soldering Iron
In case of smaller sizes than Gpp18, the top of the
solder fillet should be lower than 2/3's of the thickness of
the component or 0.5mm whichever is smaller.
In case of larger sizes than Gpp21, the top of the solder
fillet should be lower than 2/3's of the thickness of the
component.
If the solder amount is excessive, the risk of cracking is
higher during board bending or under any other stressful
conditions.
A Soldering iron ø3mm or smaller should be used.
It is also necessary to keep the soldering iron from
touching the components during the re-work.
Solder wire with ø0.5mm or smaller is required for
soldering.
Solder Amount
in section
7. Washing
Excessive output of ultrasonic oscillation during cleaning
causes PCBs to resonate, resulting in cracked chips or
broken solder. Take note not to vibrate PCBs.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT AND
FUMING WHEN THE PRODUCT IS USED.
18
213
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice
Notice (Soldering and Mounting)
1. Construction of Board Pattern
After installing chips, if solder is excessively applied to
the circuit board, mechanical stress will cause destruction
resistance characteristics to lower. To prevent this, be
extremely careful in determining shape and dimension
before designing the circuit board diagram.
Construction and Dimensions of Pattern (Example)
Flow Soldering
Chip Capacitor
LgW
Solder Resist
c
L
W
b
a
b
c
1.6g0.8
0.6-1.0
0.8-0.9
0.6-0.8
2.0g1.25
1.0-1.2
0.9-1.0
0.8-1.1
3.2g1.6
2.2-2.6
1.0-1.1
1.0-1.4
Flow soldering : 3.2g1.6 or less available.
Land
a
Reflow Soldering
LgW
1.6g0.8
a
b
c
0.6-0.8
0.6-0.7
0.6-0.8
2.0g1.25
1.0-1.2
0.6-0.7
0.8-1.1
3.2g1.6
2.2-2.4
0.8-0.9
1.0-1.4
3.2g2.5
2.0-2.4
1.0-1.2
1.8-2.3
4.5g2.0
2.8-3.4
1.2-1.4
1.4-1.8
4.5g3.2
2.8-3.4
1.2-1.4
2.3-3.0
5.7g2.8
4.0-4.6
1.4-1.6
2.1-2.6
5.7g5.0
4.0-4.6
1.4-1.6
3.5-4.8
(in mm)
Dimensions of Slit (Example)
Chip Capacitor
Slit
Solder Resist
d
L
e
W
Land
Preparing slit helps flux cleaning and resin
coating on the back of the capacitor.
But, the length of slit design should be shorter
enough as much as possible to prevent the
mechanical damage in the capacitor.
The longer slit design might receive more
severe mechanical stress from the PCB.
Recommendable slit design is shown in the
Table.
LgW
d
e
1.6g0.8
-
-
2.0g1.25
-
-
3.2g1.6
1.0-2.0
3.2-3.7
3.2g2.5
1.0-2.0
4.1-4.6
4.5g2.0
1.0-2.8
3.6-4.1
4.5g3.2
1.0-2.8
4.8-5.3
5.7g2.8
1.0-4.0
4.4-4.9
5.7g5.0
1.0-4.0
6.6-7.1
(in mm)
Continued on the following page.
18
214
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice
Continued from the preceding page.
Land Layout to Prevent Excessive Solder
Mounting Close to a Chassis
d1
Chassis
Mounting with Leaded Components
Solder (Ground solder)
Mounting Leaded Components Later
Soldering Iron
Lead Wire of
Component to be
Connected Later.
Lead Wire Connected
to a Part Provided
with Lead Wires.
Examples of
Prohibition
Adhesive
Base board
in section
Land Pattern
d2
Examples of
Improvements
by the Land
Division
in section
Solder Resist
d1<d2
in section
Solder Resist
Solder Resist
in section
in section
in section
2. Mounting of Chips
Thickness of adhesives applied
Keep thickness of adhesives applied (50-105µm or more)
to reinforce the adhesive contact considering the
thickness of the termination or capacitor (20-70µm) and
the land pattern (30-35µm).
Mechanical shock of the chip placer
When the positioning claws and pick-up nozzle are worn,
the load is applied to the chip while positioning is
concentrated in one position, thus causing cracks,
breakage, faulty positioning accuracy, etc.
Careful checking and maintenance are necessary to
prevent unexpected trouble.
An excessively low bottom dead point of the suction
nozzle imposes great force on the chip during mounting,
causing cracked chips. Please set the suction nozzle's
bottom dead point on the upper surface of the board.
3. Soldering
(1) Limit of losing effective area of the terminations and
conditions needed for soldering.
Depending on the conditions of the soldering
temperature and/or immersion (melting time),
effective areas may be lost in some part of the
terminations.
To prevent this, be careful in soldering so that any
possible loss of the effective area on the terminations
will securely remain at a maximum of 25% on all
edge length A-B-C-D-A of part with A, B, C, D, shown
in the Figure below.
A
(2) Flux Application
An excessive amount of flux generates a large quantity of
flux gas, causing deteriorated solderability. So apply flux
thinly and evenly throughout. (A foaming system is
generally used for flow soldering.)
Flux containing too high percentage of halide may cause
corrosion of the outer electrodes unless sufficient
cleaning. Use flux with a halide content of 0.2% max.
Do not use strong acidic flux.
Do not use water-soluble flux*.
(*Water-soluble flux can be defined as non rosin type flux
including wash-type flux and non-wash-type flux.)
B
D
C
Termination
Continued on the following page.
215
18
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice
Continued from the preceding page.
4. Cleaning
Please confirm there is no problem in the reliability of the
product beforehand when cleaning it with the intended
equipment.
The residue after cleaning it might cause the decrease in
the surface resistance of the chip and the corrosion of the
electrode part, etc. As a result it might cause reliability to
deteriorate. Please confirm beforehand that there is no
problem with the intended equipment in ultrasonic
cleansing.
5. Resin Coating
Please use it after confirming there is no influence on the
product with a intended equipment beforehand when the
resin coating and molding.
A cracked chip might be caused at the cooling/heating
cycle by the amount of resin spreading and/or bias
thickness.
The resin for coating and molding must be selected as
the stress is small when stiffening and the hygroscopic is
low as possible.
■ Rating
1. Capacitance change of capacitor
(1) In case of X7R char.
Capacitors have an aging characteristic, whereby
the capacitor continually decreases its
capacitance slightly if the capacitor is left on
for a long time. Moreover, capacitance might change
greatly depending on the surrounding temperature
or an applied voltage. So, it is not likely to be
suitable for use in a time constant circuit.
Please contact us if you need detailed information.
(2) In case of any char. except X7R
Capacitance might change a little depending on the
surrounding temperature or an applied voltage.
Please contact us if you intend to use this product
in a strict time constant circuit.
18
216
2. Performance check by equipment
Before using a capacitor, check that there is no
problem in the equipment's performance and the
specifications.
Generally speaking, CLASS 2 (X7R char.) ceramic
capacitors have voltage dependence characteristics
and temperature dependence characteristics in
capacitance. So, the capacitance value may change
depending on the operating condition in the equipment.
Therefore, be sure to confirm the apparatus
performance of receiving influence in a capacitance
value change of a capacitor, such as leakage current
and noise suppression characteristics.
Moreover, check the surge-proof ability of a
capacitor in the equipment, if needed, because the
surge voltage may exceed specific value by the
inductance of the circuit.
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
C02E.pdf
09.9.18
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
ISO 9001 Certifications
■ Qualified Standards
The products listed here have been produced by ISO 9001
certified factory.
Plant
Fukui Murata Mfg. Co., Ltd.
Izumo Murata Mfg. Co., Ltd.
Okayama Murata Mfg. Co., Ltd.
Murata Electronics Singapore (Pte.) Ltd.
Beijing Murata Electronics Co., Ltd.
Wuxi Murata Electronics Co., Ltd.
217
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
09.9.18