!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. C41E2.pdf 03.4.16 High Voltage Ceramic Capacitors DC10-40kV HIGH VOLTAGE CERAMIC CAPACITORS Murata Manufacturing Co., Ltd. Cat.No.C41E-2 rating, soldering, mounting and handling) in this catalogto toprevent preventsmoking smokingand/or and/orburning, burning,etc. etc. Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage operating, and operating, rating, soldering and mounting, handling) in PDF this catalog !Note •Please C41E2.pdf 03.4.16 you are requested to detailed approve specifications. our product specifications to transact theour approval sheet for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space for Therefore, or please approve product specification orspecificaions transact the approval sheet for product specification before ordering. CONTENTS Part Numbering 1 3 2 Radial Lead Type DHR Series (DC10-15kV) 3 Specifications and Test Methods 5 Typical Characteristics Data/Packaging 7 DHR Series !Caution/Notice 2 1 8 Mold Type DHS N4700 Series (DC10-40kV) 10 Typical Characteristics Data / Specifications and Test Methods 12 Mold Type DHS Z5V Series (DC20-40kV) 13 Typical Characteristics Data 14 Specifications and Test Methods 15 DHS Series !Caution and Notice 16 ISO9000 Certifications 18 Recycled Paper 2 3 C41E2.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. o Part Numbering High Voltage Ceramic Capacitors (over 10kV) DH R (Global Part Number) q B B3 4A 101 M 2B w e r t u i y yCapacitance Tolerance qProduct ID Product ID DH High Voltage Ceramic Capacitors (over 10kV) wSeries Category Code Contents R Radial Type S Mold Type T20% Z W80%, Y20% 2B Lead Type Straight Long Cap. Change or Temp. Coeff. Temp. Range Code Body Diameter C2 20mm B T10% Y25 to W85D D2 24mm Z5V W22%, Y82% W10 to W85D H2 30mm L2 38mm N2 43mm R2 52mm T2 60mm Rated Voltage CX 20mm 4A DC10kV DX 24mm 4B DC12kV HX 30mm 4C DC15kV LX 38mm 4D DC20kV NX 43mm 4F DC30kV RX 52mm 4G DC40kV TX 60mm N4700 Y4700T1000ppm/D W20 to W85D rRated Voltage Code 9.5mm ø0.65mm 12.7mm ø0.8mm uBody Diameter and Terminal Type (DHS Series) F4 ZM Lead Spacing Lead Diameter 2F B3 4E tCapacitance Expressed by three figures. The unit is pico-farad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two numbers. If there is a decimal point, it is expressed by the capital letter "R". In this case, all figures are significant digits. 2 T10% M Code eTemperature Characteristics Temp. Char. Capacitance Tolerance K uLead Type (DHR Series) First three digits of part number (qProduct ID and wSeries Category) express "Series Name". Code Code Terminal Type ISO M4, P0.7 Tapped Holes (Metric Screw Thread) No.8-32, NC-2B Tapped Holes (Inch Screw Thread) iPackaging Code Packaging B Bulk C41E2.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. High Voltage Ceramic Capacitors DC10-40kV 1 Radial Lead Type DHR Series (DC10-15kV) D max. T max. D+1.0 max. ■ Features 35.0 min. 4.0 max. 1. Small size 2. Excellent heat-proof, humidity-proof and highdielectric strength voltage. 3. Coated with flame-retardant epoxy resin. φd±0.05 ■ Applications 1. Color TV doublers and triplers 2. High voltage DC power supplies (PPCs, X-ray apparatus, air cleaner, lasers, etc.) 3. Tuning capacitor in focus circuit for display 2 F± (in mm) ■ Marking Temp. Char. ZM B ø8mm 101 10K 101 10K ø9mm and 10mm 221K 10K• 221M 10K ø11mm to 14mm ZM 471K 10K B 471M 10K ø15mm to 18mm 102KZ 10K 0050 102MB 10K 0050 Nominal body dia. Omitted Nominal body dia. ø8mm Nominal body dia. ø9 and 10mm Temperature Characteristics Nominal body dia. ø11 to 14mm Marked with • (dot) Marked with code. Marked with Z. Nominal body dia. ø15mm min. Nominal Capacitance Capacitance Tolerance Rated Voltage Manufacturer's Identification Omitted Marked with code. Under 100pF : Actual value, 100pF and over : Marked with 3 figures. Marked with code, omitted for nominal body diameter ø8mm and under. Marked with code. Marked with , omitted for nominal body diameter ø14mm and under. Abbreviation, omitted for nominal body diameter ø14mm and under. Manufactured Date (Ex.) 0 0 5 0 1 2 3 1 : Last numeral in year 3 : Fix No. 2 : Number in the month 3 C41E2.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. 1 ZM Characteristics Rated Voltage (kV) Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Body Thickness T (mm) Lead Dia. ød (mm) DHR4E4A101K2BB DC10 100 +10, -10% 8.0 9.5 7.0 0.65 DHR4E4A151K2BB DC10 150 +10, -10% 8.0 9.5 7.0 0.65 DHR4E4A221K2BB DC10 220 +10, -10% 9.0 9.5 7.0 0.65 DHR4E4A331K2BB DC10 330 +10,-10% 10.0 9.5 7.0 0.65 DHR4E4A471K2BB DC10 470 +10, -10% 12.0 9.5 7.0 0.65 DHR4E4A681K2BB DC10 680 +10, -10% 13.0 9.5 7.0 0.65 DHR4E4A102K2BB DC10 1000 +10, -10% 15.0 9.5 7.0 0.65 DHR4E4B101K2BB DC12 100 +10, -10% 8.0 9.5 7.3 0.65 DHR4E4B151K2BB DC12 150 +10, -10% 9.0 9.5 7.3 0.65 DHR4E4B221K2BB DC12 220 +10, -10% 9.0 9.5 7.3 0.65 DHR4E4B331K2BB DC12 330 +10, -10% 11.0 9.5 7.3 0.65 DHR4E4B471K2BB DC12 470 +10, -10% 12.0 9.5 7.3 0.65 DHR4E4B681K2BB DC12 680 +10, -10% 14.0 9.5 7.3 0.65 DHR4E4B102K2BB DC12 1000 +10, -10% 16.0 9.5 7.3 0.65 DHR4E4C101K2BB DC15 100 +10, -10% 8.0 9.5 8.2 0.65 DHR4E4C151K2BB DC15 150 +10, -10% 9.0 9.5 8.2 0.65 DHR4E4C221K2BB DC15 220 +10, -10% 10.0 9.5 8.2 0.65 DHR4E4C331K2BB DC15 330 +10, -10% 12.0 9.5 8.2 0.65 DHR4E4C471K2BB DC15 470 +10, -10% 13.0 9.5 8.2 0.65 DHR4E4C681K2BB DC15 680 +10, -10% 15.0 9.5 8.2 0.65 DHR4E4C102K2FB DC15 1000 +10, -10% 18.0 12.7 8.2 0.8 Rated Voltage (kV) Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Body Thickness T (mm) Lead Dia. ød (mm) DHRB34A101M2BB DC10 100 +20, -20% 8.0 9.5 7.0 0.65 DHRB34A151M2BB DC10 150 +20, -20% 8.0 9.5 7.0 0.65 DHRB34A221M2BB DC10 220 +20, -20% 9.0 9.5 7.0 0.65 DHRB34A331M2BB DC10 330 +20, -20% 10.0 9.5 7.0 0.65 DHRB34A471M2BB DC10 470 +20, -20% 12.0 9.5 7.0 0.65 DHRB34A681M2BB DC10 680 +20, -20% 13.0 9.5 7.0 0.65 DHRB34A102M2BB DC10 1000 +20, -20% 15.0 9.5 7.0 0.65 DHRB34B101M2BB DC12 100 +20, -20% 8.0 9.5 7.7 0.65 DHRB34B151M2BB DC12 150 +20, -20% 9.0 9.5 7.5 0.65 DHRB34B221M2BB DC12 220 +20, -20% 9.0 9.5 7.5 0.65 DHRB34B331M2BB DC12 330 +20, -20% 11.0 9.5 7.5 0.65 DHRB34B471M2BB DC12 470 +20, -20% 12.0 9.5 7.5 0.65 DHRB34B681M2BB DC12 680 +20, -20% 14.0 9.5 7.5 0.65 DHRB34B102M2BB DC12 1000 +20, -20% 16.0 9.5 7.5 0.65 DHRB34C101M2BB DC15 100 +20, -20% 8.0 9.5 8.5 0.65 DHRB34C151M2BB DC15 150 +20, -20% 9.0 9.5 8.2 0.65 DHRB34C221M2BB DC15 220 +20, -20% 10.0 9.5 8.2 0.65 DHRB34C331M2BB DC15 330 +20, -20% 12.0 9.5 8.2 0.65 DHRB34C471M2BB DC15 470 +20, -20% 13.0 9.5 8.2 0.65 DHRB34C681M2BB DC15 680 +20, -20% 15.0 9.5 8.2 0.65 DHRB34C102M2FB DC15 1000 +20, -20% 18.0 12.7 8.2 0.8 Part Number B Characteristics Part Number 4 C41E2.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Specifications and Test Methods No. Item Specifications 1 Operating Temperature Range -25 to +100˚C 2 Capacitance Within the specified tolerance. 3 Dissipation Factor (D.F.) 4 Insulation Resistance (I.R.) 5 ZM B 7 8 9 — 1.0% max. 2.5% max. Between Lead Wires No failure. The capacitor should not be damaged when DC voltage of 150% of the rated voltage is applied between the lead wires for 60±5 sec. in insulating liquid or gas. (Charge/Discharge currentV50mA) No failure. The capacitor is placed in the container with metal balls of diameter 1mm so that each lead wire, shortcircuited, is kept approximately 2mm off the metal balls as shown in the figure at right, and DC voltage of 3kV is applied for 10 sec. between capacitor lead wires and metal balls. (Charge/Discharge currentV50mA) Temperature Characteristics Humidity (Under Steady State) Life Same condition as capacitance. The insulation resistance should be measured with DC1000V within 60±5 sec. of charging. Dielectric Strength Soldering Effect The capacitance should be measured at 20°C with 1±0.2kHz and AC 5V(r.m.s.) max. 10000MΩ min. Temp. Char. 6 Testing Method Between Lead Wires Body Insulation ZM B Temp. Coefficient or Max. Cap. Change -4700±1000ppm/˚C ±10% Appearance No marked defect. Capacitance Change Within ±10% Dielectric Strength (Between Lead Wires) No failure. Appearance No marked defect. Capacitance Change Within ±10% D.F. ZM B I.R. 5000MΩ min. Dielectric Strength (Between Lead Wires) No failure. Appearance No marked defect. Capacitance Change Within ±10% D.F. ZM B I.R. 5000MΩ min. Dielectric Strength (Between Lead Wires) No failure 1 1.5% max. 4.0% max. 1.5% max. 4.0% max. Approx. 2mm Metal balls The capacitance measurement should be made at each step specified in table. Capacitance change from the value of step 3 should not exceed the limit specified. Step Char. ZM B 1 2 3 4 5 — 20±2˚C — -25±3˚C 20±2˚C 20±2˚C 85±2˚C 85±2˚C 20±2˚C 20±2˚C The lead wires should be immersed into the melted solder of 350±10˚C up to about 1.5 to 2.0mm from the main body for 3.5±0.5 sec. Post-treatment: Capacitor should be stored for 24±2 hrs. at *room condition. Set the capacitor for 240±8 hrs. at 40±2˚C in 90 to 95% relative humidity. Post-treatment: Capacitor should be stored for 1 to 2 hrs. at *room condition. Apply a DC voltage of 125% of the rated voltage for 1000+48 -0 hrs. in silicon oil at 85±2˚C. Post-treatment: Capacitor should be stored for 24±2 hrs. at *room condition. (Charge/Discharge currentV50mA) (Note) Tests for Dielectric Strength (between lead wires), Charge Discharge Test, Humidity, Temperature Cycle and Life should be performed with specimens having molded resin (MR1023C : made by Murata) extending over 3mm on all the surface. * "room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 5 C41E2.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Specifications and Test Methods 1 Continued from the preceding page. No. 10 Item Specifications Appearance No marked defect. Capacitance Change Within ±10% D.F. ZM B I.R. 5000MΩ min. 1.5% max. 4.0% max. Testing Method Charge discharge test should be measured in the following test circuit and cycle. Applied voltage : Rated voltage Cycle time : 20000 cycle Post-treatment : Capacitor should be stored for 4 hrs. at *room condition. <Circuit> Charge Discharge Test <Cycle> Charge SW R1 Discharge CX C0 E Dielectric Strength (Between Lead Wires) 1 2 1 2 R2 (sec.) No failure. Cx : specimen R1 : circuit protective resistor (300kΩ) . C0 : supplied energy for Cx. C0 =.10Cx R2 : current limitting resistor (E/10Ω) E : direct-current voltage source 11 Temperature Cycle Appearance No marked defect. Capacitance Change Within ±10% D.F. ZM B I.R. 5000MΩ min. Dielectric Strength (Between Lead Wires) No failure. 1.5% max. 4.0% max. 12 Lead wire should not be cut off. Capacitor should not be broken. Solderability of Leads -30˚C 30 (min) Bending 13 +100˚C 30 Pull Strength of Lead Temperature cycle should be measured in the following test. Cycle time : 5 cycle Post-treatment : Capacitor should be stored for 4 hrs. at *room condition. Lead wire should be soldered with uniform coating on the axial direction 3 of the circumferential direction. over – 4 As shown in the figure at right, fix the body of the capacitor and apply a tensile weight gradually to each lead wire in the radial direction of the capacitor up to 10N and keep it for 10±1 sec. W Each lead wire should be subjected to 5N of weight and bent 90˚ at the point of egress, in one direciton, then returned to its original position and bent 90˚ in the opposite direction at the rate of one bend in 2 to 3 sec. The lead wire of a capacitor should be dipped into a 25% methanol solution of rosin and then into molten solder of 235±5˚C for 2±0.5 sec. In both cases the depth of dipping is up to about 1.5 to 2.0mm from the root of lead wires. (Note) Tests for Dielectric Strength (between lead wires), Charge Discharge Test, Humidity, Temperature Cycle and Life should be performed with specimens having molded resin (MR1023C : made by Murata) extending over 3mm on all the surface. * "room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa 6 C41E2.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Typical Characteristics Data/Packaging 1 ■ Cap.-Temp. Char. B Characteristics 20 20 10 Cap. Change (%) Cap. Change (%) ZM Characteristics 40 0 -20 0 -10 -40 -20 -40 -20 0 20 40 60 80 100 -40 -20 0 20 Temperature (˚C) 40 60 80 100 Temperature (˚C) ■ Cap.-DC Bias Char. ZM Characteristics B Characteristics 20 20 0 0 Cap. Change (%) Cap. Change (%) 10 DC15kV -10 DC10kV -20 -20 DC15kV -40 DC10kV DC12kV -60 -30 -40 DC12kV -80 0 2 4 6 8 10 12 14 16 0 2 4 DC-BIAS (kV) 6 8 10 12 14 16 DC-BIAS (kV) ■ Packaging Styles ■ Example Bulk Polyethylene Bag FBT (HV) Anode of CRT DHR Capacitor DHR Capacitor (GND) Minimum Quantity (Order in Sets Only) 200 (pcs.) Minimum Order Quantity 200 (pcs.) • "Minimum Quantity" means the number of units of each delivery or order. The quantity should be an integral multiple of the "minimum quantity". (Please note that the actual delivery quantity in a package may change sometimes.) 7 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please C41E2.pdf 03.4.16 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. DHR Series !Caution/Notice 1 ■ !Caution (Rating) 1. Operating Voltage When DC-rated capacitors are to be used in AC or ripple current circuits, be sure to maintain the Vp-p value of the applied voltage or the Vo-p which contains DC bias within the rated voltage range. When the voltage is applied to the circuit, starting or stopping may generate irregular voltage for a transit period because of resonance or switching. Be sure to use a capacitor with a rated voltage range that includes these irregular voltages. Voltage Positional Measurement DC Voltage V0-p DC+AC Voltage V0-p AC Voltage Vp-p Pulse Voltage (1) Vp-p Pulse Voltage (2) Vp-p 2. Operating Temperature and Self-generated Heat Keep the surface temperature of a capacitor below the upper limit of its rated operating temperature range. Be sure to take into account the heat generated by the capacitor itself. When the capacitor is used in a highfrequency current, pulse current or similar current, it may self-generate heat due to dielectric loss. The applied voltage load should be such that the capacitor's selfgenerated heat is within 10°C at an atmosphere temperature of 25°C. When measuring, use a thermocouple of small thermal capacity-K of ø0.1mm in conditions where the capacitor is not affected by radiant heat from other components or surrounding ambient fluctuations. Excessive heat may lead to deterioration of the capacitor's characteristics and reliability. (Never attempt to perform measurement with the cooling fan running. Otherwise, accurate measurement cannot be ensured.) Failure to follow the above cautions may result, worst case, in a short circuit and cause fuming or partial dispersion when the product is used. ■ !Caution (Storage and Operation Condition) Operating and storage environment The insulating coating of capacitors does not form a perfect seal; therefore, do not use or store capacitors in a corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. And avoid exposure to moisture. The capacitor is designed to be used in insulating media, such as epoxy resin, silicone oil, etc. There must be 3mm or more of insulating media for each direction of the capacitor. Before cleaning, bonding, or molding this product, 8 verify that these processes do not affect product quality by testing the performance of a cleaned, bonded or molded product in the intended equipment. Store the capacitors where the temperature and relative humidity do not exceed -10 to 40 degrees centigrade and 15 to 85%. Use capacitors within 6 months. FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE FUMING OR PARTIAL DISPERSION WHEN THE PRODUCT IS USED. catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please C41E2.pdf 03.4.16 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. DHR Series !Caution/Notice 1 ■ !Caution (Soldering and Mounting) 1. Vibration and impact Do not expose a capacitor or its leads to excessive shock or vibration during use. 2. Soldering When soldering this product to a PCB/PWB, do not exceed the solder heat resistance specification of the capacitor. Subjecting this product to excessive heating could melt the internal junction solder and may result in thermal shocks that can crack the ceramic element. When soldering capacitor with a soldering iron, it should be performed in following conditions. Temperature of iron-tip: 400 degrees C. max. Soldering iron wattage: 50W max. Soldering time: 3.5 sec. max. FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE FUMING OR PARTIAL DISPERSION WHEN THE PRODUCT IS USED. ■ !Caution (Handling) Vibration and impact Do not expose a capacitor or its leads to excessive shock or vibration during use. FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE FUMING OR PARTIAL DISPERSION WHEN THE PRODUCT IS USED. ■ Notice (Soldering and Mounting) Cleaning (ultrasonic cleaning) To perform ultrasonic cleaning, observe the following conditions. Rinse bath capacity : Output of 20 watts per liter or less. Rinsing time : 5 min maximum. Do not vibrate the PCB/PWB directly. Excessive ultrasonic cleaning may lead to fatigue destruction of the lead wires. ■ Notice (Rating) Capacitance change of capacitor 1. Class 1 capacitors Capacitance might change a little depending on the surrounding temperature or an applied voltage. Please contact us if you intend to use this product in a strict time constant circuit. 2. Class 2 and 3 capacitors Class 2 and 3 capacitors with temperature characteristics B, E and F have an aging characteristic, whereby the capacitor continually decreases its capacitance slightly if the capacitor is left on for a long time. Moreover, capacitance might change greatly depending on the surrounding temperature or an applied voltage. So, it is not likely to be suitable for use in a time constant circuit. Please contact us if you need detailed information. 9 C41E2.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. High Voltage Ceramic Capacitors DC10-40kV Mold Type DHS N4700 Series (DC10-40kV) 2 (H) Murata's high voltage ceramic capacitors, DHS N4700 series, are designed to meet the stringent requirements of high voltage applications. These capacitors are especially appropriate for applications which require a low dissipation factor and a small voltage coefficient. L±1.5 2 Features 1. Epoxy resin encapsulated 2. Small size 3. Low dissipation factor and low heating value 4. Linear temperature characteristic 5. Low DC, AC-voltage coefficient øD±1.5 DC Rated Depth of tapped holes Voltage (kV) (mm) Applications • Gas laser • DC HV power supplies • Lightning arresters, voltage distribution systems • Electron microscopes, synchroscopes • Electrostatic coating machines Part Number (in mm) Capacitance (pF) Capacitance Tolerance (%) 10, 15 4 20, 30 6 40 8 DC Rated Voltage (kV) Dimensions (mm) D DHS4E4A561KC2B 560 DHS4E4A122KH2B 1200 DHS4E4A282KL2B 2800 DHS4E4A502KR2B 5000 DHS4E4A802KT2B 8000 DHS4E4A561MCXB 560 DHS4E4A122MHXB 1200 DHS4E4A282MLXB 2800 DHS4E4A502MRXB 5000 52 DHS4E4A802MTXB 8000 60 DHS4E4C371KC2B 370 20 DHS4E4C112KH2B 1100 DHS4E4C192KL2B 1900 DHS4E4C342KR2B 3400 DHS4E4C532KT2B 5300 DHS4E4C371MCXB 370 DHS4E4C112MHXB 1100 DHS4E4C192MLXB 1900 DHS4E4C342MRXB 3400 52 DHS4E4C532MTXB 5300 60 L H Terminal Type (Screw Thread Type) 20 30 ±10 ISO M4, P0.7 (Metric Screw Thread) 38 52 10 60 20 16 12 30 ±20 No.8-32, NC-2B (Inch Screw Thread) 38 30 ±10 ISO M4, P0.7 (Metric Screw Thread) 38 52 15 60 20 18 14 30 ±20 38 No.8-32, NC-2B (Inch Screw Thread) Continued on the following page. 10 C41E2.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. Part Number 2 Capacitance (pF) Capacitance Tolerance (%) DC Rated Voltage (kV) Dimensions (mm) D L H Terminal Type (Screw Thread Type) 20 DHS4E4D281KC2B 280 DHS4E4D881KH2B 880 DHS4E4D142KL2B 1400 DHS4E4D252KR2B 2500 DHS4E4D402KT2B 4000 DHS4E4D281MCXB 280 DHS4E4D881MHXB 880 DHS4E4D142MLXB 1400 DHS4E4D252MRXB 2500 DHS4E4D402MTXB 4000 60 DHS4E4F191KC2B 190 20 DHS4E4F591KH2B 590 DHS4E4F941KL2B 940 DHS4E4F172KR2B 1700 DHS4E4F272KT2B 2700 DHS4E4F191MCXB 190 DHS4E4F591MHXB 590 DHS4E4F941MLXB 940 DHS4E4F172MRXB 1700 52 DHS4E4F272MTXB 2700 60 DHS4E4G141KC2B 140 20 DHS4E4G441KH2B 440 DHS4E4G701KL2B 700 DHS4E4G132KR2B 1300 DHS4E4G202KT2B 2000 DHS4E4G141MCXB 140 DHS4E4G441MHXB 440 DHS4E4G701MLXB 700 DHS4E4G132MRXB 1300 52 DHS4E4G202MTXB 2000 60 30 ±10 ISO M4, P0.7 (Metric Screw Thread) 38 52 20 60 20 24 20 2 30 ±20 No.8-32, NC-2B (Inch Screw Thread) 38 52 30 ±10 ISO M4, P0.7 (Metric Screw Thread) 38 52 30 60 20 28 24 30 ±20 No.8-32, NC-2B (Inch Screw Thread) 38 30 ±10 ISO M4, P0.7 (Metric Screw Thread) 38 52 40 60 20 36 32 30 ±20 38 No.8-32, NC-2B (Inch Screw Thread) 11 C41E2.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Typical Characteristics Data / Specifications and Test Methods 30 20 3 10 Capacitance 0 2 –10 –20 1 –30 Dissipation Factor –40 –20 0 20 40 0 60 80 Capacitance Change (%) 2 Typical Voltage Coefficient Dissipation Factor (%) Capacitance Change (%) Temperature Characteristic 0 Capacitance –20 0 100 2 –10 20 40 Temperature (°C) 60 80 100 DC Rated Voltage (%) Frequency Characteristic Capacitance –4 –6 6 4 2 Dissipation Factor 1 10 Dissipation Factor (%) Capacitance Change (%) 0 –2 0 100 1000 Frequency (kHz) No Item 1 Operating Temperature Range 2 Capacitance Specifications Testing Method -20 to +85°C Within the specified The capacitance should be measured at 20°C with 1±0.1kHz tolerance. and AC 1 to 5V(r.m.s.). The capacitance measurement should be made at each step Temperature coefficient 3 Temperature Characteristics -4700±1000ppm/°C (Temp. range: +20 to +85°C) specified in table. Capacitance change from the value of step 3 should not exceed the limit specified. Step Temp. (°C) 4 Dissipation Factor (D.F.) 0.3% max. 1 — 2 — 3 20±2 4 85±2 5 20±2 The dissipation factor should be measured at 20°C with 1±0.1kHz and AC 1 to 5V(r.m.s.). The capacitor should not be damaged when DC voltage of 150% of 5 Dielectric Strength Between Terminal No failure. the rated voltage is applied between the terminals for 60±5 sec. in insulating liquid or gas. (Charge/Discharge current V 50mA) 6 Insulation Resistance (I.R.) 10000MΩ min. Strength of Capacitor should not be The insulation resistance should be measured with DC1000V within 60±5 sec. of charging. When mounting the capacitor on equipment, be sure to mount 7 Terminal Torque Strength Life Humidity 9 (Under Steady State) Terminal Type ISO M4, No.8-32 Apply a DC voltage of 125% of the rated voltage for 100+24/-0 hrs. in Capacitance Change Within ±5% silicon oil at 85±2°C. D.F. 1.0% max. Post-treatment: Capacitor should be stored for 24 hrs. at *room I.R. 1000MΩ min. condition. (Charge/Discharge current V 50mA) Appearance No marked defect. Capacitance Change Within ±5% D.F. 1.0% max. I.R. 1000MΩ min. Set the capacitor for 100+24/-0 hrs. at 40±2°C in 90 to 95% relative humidity. Post-treatment: Capacitor should be stored for 24 hrs. at *room condition. * "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa 12 torque (N·m) 1.5 No marked defect. Appearance 8 broken. them within the torque strength values shown in the table below. C41E2.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. High Voltage Ceramic Capacitors DC10-40kV Mold Type DHS Z5V Series (DC20-40kV) 3 (H) L±1.5 Features 1. Epoxy resin encapsulated 2. Small size 3. Highly reliable internal construction 4. Wide selection of values 5. Up to DC 40kV working voltage 3 Applications • Electrostatic coating machines • Electron microscopes, synchroscopes • CRT power supplies • Lightning arrester voltage distribution systems • DC HV power supplies Part Number Capacitance (pF) øD±1.5 Capacitance Tolerance (%) DC Rated Voltage (kV) Dimensions (mm) D DHSF44D601ZD2B 600 24 DHSF44D102ZH2B 1000 30 DHSF44D242ZN2B 2400 43 DHSF44D332ZR2B 3300 52 DHSF44D482ZT2B 4800 DHSF44D601ZDXB 600 DHSF44D102ZHXB 1000 30 DHSF44D242ZNXB 2400 43 DHSF44D332ZRXB 3300 52 DHSF44D482ZTXB 4800 60 DHSF44F461ZD2B 460 24 DHSF44F781ZH2B 780 30 DHSF44F182ZN2B 1800 43 DHSF44F252ZR2B 2500 52 DHSF44F362ZT2B 3600 DHSF44F461ZDXB 460 20 +80, -20 30 60 24 60 24 DHSF44F781ZHXB 780 30 DHSF44F182ZNXB 1800 43 DHSF44F252ZRXB 2500 52 DHSF44F362ZTXB 3600 60 DHSF44G341ZD2B 340 24 DHSF44G571ZH2B 570 30 DHSF44G132ZN2B 1300 43 DHSF44G192ZR2B 1900 52 DHSF44G272ZT2B 2700 DHSF44G341ZDXB 340 DHSF44G571ZHXB 570 30 DHSF44G132ZNXB 1300 43 DHSF44G192ZRXB 1900 52 DHSF44G272ZTXB 2700 60 40 60 24 L H (in mm) Terminal Type (Screw Thread Type) ISO M4, P0.7 (Metric Screw Thread) 26 24 No.8-32, NC-2B (Inch Screw Thread) ISO M4, P0.7 (Metric Screw Thread) 34 32 No.8-32, NC-2B (Inch Screw Thread) ISO M4, P0.7 (Metric Screw Thread) 41 39 No.8-32, NC-2B (Inch Screw Thread) 13 C41E2.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Typical Characteristics Data Life Life Capacitance & D.F. VS Time Test Voltage : DC 15kV Temp. : 85°C Capacitance –40 –60 2.0 –80 1.0 Dissipation Factor Capacitance Change (%) 0 –20 Dissipation Factor (%) Capacitance Change (%) +20 20 2.0 10 0 1.0 ∆C –10 D.F. 0 –60 –40 –20 0 20 40 60 80 100 120 –20 140 0 2000 0 4000 Time (h) Temperature (°C) 3 Dissipation Factor (%) Dissipation Factor and Capacitance-Temperature Dissipation Factor and Capacitance-Frequency 3 Humidity Humidity Capacitance & D.F. VS Cycles Test Voltage : DC 15kV Temp. : 60°C Relative Humidity : 90-95% Capacitance Change –4 2.0 1.0 Dissipation Factor 0 1kHz 10kHz 100kHz Capacitance –10 –20 2.0 –30 1.0 Dissipation Factor –40 0 –50 60 14 80 100 Dissipation Factor (%) Capacitance Change (%) 0 DC Rated Voltage (%) ∆C 0 1.0 –10 0 100 200 Time (h) +10 40 10 2.0 D.F. Typical Voltage Coefficient 20 20 –20 1MHz Frequency 0 Capacitance Change (%) –2 Dissipation Factor (%) Capacitance Change (%) 0 300 0 400 Dissipation Factor (%) +2 C41E2.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Specifications and Test Methods No Item 1 Operating Temperature Range 2 Capacitance Specifications Testing Method -20 to +85°C Within the specified The capacitance should be measured at 25°C with 1±0.1kHz tolerance. and AC 1 to 5V (r.m.s.). The capacitance measurement should be made at each step Capacitance change 3 Temperature Characteristics +22%/-82% (Temp. range: +10 to +85°C) 3 4 Dissipation Factor (D.F.) 1.5% max. specified in table. Capacitance change from the value of step 3 should not exceed the limit specified. Step Temp. (°C) 1 25±2 2 -20±3 3 25±2 4 85±2 5 25±2 The dissipation factor should be measured at 25°C with 1±0.1kHz 3 and AC 1 to 5V (r.m.s.). The capacitor should not be damaged when DC voltage of 150% of 5 Dielectric Strength Between Terminal No failure. the rated voltage is applied between the terminals for 60±5 sec. in insulating liquid or gas. (Charge/Discharge current V 50mA) 6 Insulation Resistance (I.R.) 10000MΩ min. The insulation resistance should be measured with DC1000V within 60±5 sec. of charging. When mounting the capacitors on equipment, be sure to mount 7 8 Strength of Terminal Life Humidity 9 (Under Steady State) Torque Strength Capacitor should not be broken. them within the torque strength values shown in the table below. Terminal Type ISO M4, No.8-32 torque (N·m) 1.5 Appearance No marked defect. Apply a DC voltage of 125% of the rated voltage for 100+24/-0 hrs. in Capacitance Change Within ±20% silicon oil at 85±2°C. D.F. 5.0% max. Post-treatment: Capacitor should be stored for 24 hrs. at *room I.R. 1000MΩ min. condition. (Charge/Discharge current V 50mA) Appearance No marked defect. Capacitance Change Within ±20% D.F. 5.0% max. I.R. 1000MΩ min. Set the capacitor for 100+24/-0 hrs. at 40±2°C in 90 to 95% relative humidity. Post-treatment: Capacitor should be stored for 24 hrs. at *room condition. * "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa 15 C41E2.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. DHS Series !Caution and Notice Caution 1. Operating voltage When DC-rated capacitors are to be used in AC or ripple current circuits, be sure to maintain the Vp-p value of the applied voltage or the Vo-p which contains DC bias within the rated voltage range. When the voltage is applied to the circuit, starting or stopping may generate irregular voltage for a transit period because of resonance or switching. Be sure to use a capacitor with a rated voltage range that includes these irregular voltages. 3 3 Voltage Positional Measurement DC Voltage Vo-p DC+AC Voltage Vo-p 2. Operating temperature and self-generated heat Keep the surface temperature of a capacitor below the upper limit of its rated operating temperature range. Be sure to take into account the heat generated by the capacitor itself. When the capacitor is used in a high-frequency current, pulse current or similar current, it may self-generate heat due to dielectric loss. The applied voltage load should be such that the capacitor's self-generated heat is within 10°C at an atmosphere temperature of 25°C. When measuring, use a thermocouple of small thermal capacity-K of ø0.1mm in conditions where the capacitor is not affected by radiant heat from other components or surrounding ambient fluctuations. Excessive heat may lead to deterioration of the capacitor's characteristics and reliability. (Never attempt to perform measurement with the cooling fan running. Otherwise, accurate measurement cannot be ensured.) 3. Installation Installation torque should not exceed the torque strength values in "Specifications and Test Methods". Do not use a screw with a thread depth greater than specified. Avoid installation in which any bending torque is applied to the capacitor terminal. Do not rework or resolder the terminal. 16 AC Voltage Vp-p Pulse Voltage (1) Vp-p Pulse Voltage (2) Vp-p 4. Operating and storage environment The insulating coating of capacitors does not form a perfect seal; therefore, do not use or store capacitors in a corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. And avoid exposure to moisture. Before cleaning, bonding, or molding this product, verify that these processes do not affect product quality by testing the performance of a cleaned, bonded or molded product in the intended equipment. Store the capacitors where the temperature and relative humidity do not exceed –10 to 40°C and 15 to 85%. Use capacitors within 6 months. 5. Vibration and impact Do not expose a capacitor to excessive shock or vibration during use. Failure to follow the above cautions may result, worst case, in a short circuit and cause fuming or partial dispersion when the product is used. catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please C41E2.pdf 03.4.16 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. DHS Series !Caution and Notice Notice 3 Capacitance change of capacitor Class 1 capacitors Capacitance might change a little depending on the surrounding temperature or an applied voltage. Please contact us if you intend to use this product in a strict time constant circuit. Class 2 and 3 capacitors Class 2 and 3 capacitors with temperature characteristics B, E and F have an aging characteristic, whereby the capacitor continually decreases its capacitance slightly if the capacitor is left on for a long time. Moreover, capacitance might change greatly depending on the surrounding temperature or an applied voltage. So, it is not likely to be suitable for use in a time constant circuit. Please contact us if you need detailed information. 3 17 C41E2.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note •Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. •This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. 1 ISO9000 Certifications 1 Manufacturing plants which produce the products in this catalog have obtained the ISO9000 quality system certificate. Plant Certified Date Organization Registration No. Applied standard Izumo Murata Manufacturing Co., Ltd. Feb. 1. '00 Underwriters Laboratories Inc. A5587 ISO9001 Murata Electronics (Thailand), Ltd. Apr. 8. '02 Underwriters Laboratories Inc. A6279 ISO9001 2 2 3 3 4 4 18 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. C41E2.pdf 03.4.16 Note: 1. Export Control For customers outside Japan No muRata products should be used or sold, through any channels, for use in the design, development, production, utilization, maintenance or operation of, or otherwise contribution to (1) any weapons (Weapons of Mass Destruction (nuclear, chemical or biological weapons or missiles) or conventional weapons) or (2) goods or systems specially designed or intended for military end-use or utilization by military end-users. For customers in Japan For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required for export. < < > > 2. Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially high reliability for the prevention of defects which might directly damage a third party's life, body or property, or when one of our products is intended for use in applications other than those specified in this catalog. q Aircraft equipment w Aerospace equipment e Undersea equipment r Power plant equipment t Medical equipment y Transportation equipment (vehicles, trains, ships, etc.) u Traffic signal equipment i Disaster prevention / crime prevention equipment o Data-processing equipment !0 Application of similar complexity and/or reliability requirements to the applications listed above 3. Product specifications in this catalog are as of April 2003. They are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or product engineers. 4. Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 5. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 6. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect of our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described or contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned above under licenses without our consent. 7. No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process. http://www.murata.com/ Head Office 1-10-1, Higashi Kotari, Nagaokakyo-shi, Kyoto 617-8555, Japan Phone: 81-75-951-9111 International Division 3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan Phone: 81-3-5469-6123 Fax: 81-3-5469-6155 E-mail: [email protected]