SF1200, SF1600 www.vishay.com Vishay Semiconductors Ultrafast Avalanche Sinterglass Diode FEATURES • Very low switching losses • Glass passivated • High reverse voltage • Hermetically envelope sealed axial-leaded glass • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 949539 APPLICATIONS MECHANICAL DATA • Switched mode power supplies Case: SOD-57 • High-frequency inverter circuits Terminals: plated axial leads, solderable per MIL-STD-750, method 2026 Polarity: color band denotes cathode end Mounting position: any Weight: approx. 369 mg ORDERING INFORMATION (Example) DEVICE NAME ORDERING CODE TAPED UNITS SF1600 SF1600-TR 5000 per 10" tape and reel MINIMUM ORDER QUANTITY 25 000 SF1600 SF1600-TAP 5000 per ammopack 25 000 PARTS TABLE PART TYPE DIFFERENTIATION PACKAGE SF1200 VR = 1200 V; IF(AV) = 1 A SOD-57 SF1600 VR = 1600 V; IF(AV) = 1 A SOD-57 ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER Reverse voltage = repetitive peak reverse voltage TEST CONDITION See electrical characteristics PART SYMBOL VALUE UNIT SF1200 VR = VRRM 1200 V SF1600 VR = VRRM 1600 V Peak forward surge current tp = 10 ms, half sine wave IFSM 30 A Average forward current Half sine wave, VR = VRRM, RthJA = 45 K/W IF(AV) 1 A I(BR)R = 400 mA, inductive load ER 10 mJ Tj = Tstg - 55 to + 175 °C Max. pulse energy in avalanche mode, non repetitive (inductive load switch off Junction and storage temperature range MAXIMUM THERMAL RESISTANCE (Tamb = 25 °C, unless otherwise specified) PARAMETER Junction ambient Rev. 1.8, 11-Sep-12 TEST CONDITION SYMBOL VALUE UNIT Lead length l = 10 mm, TL = constant RthJA 45 K/W Document Number: 86059 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SF1200, SF1600 www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT IF = 1 A VF - - 3.4 V VR = VRRM IR - - 5 μA VR = VRRM, Tj = 125 °C IR - - 50 μA SF1200 V(BR)R 1250 - - V SF1600 V(BR)R 1650 - - V trr - - 75 ns Forward voltage Reverse current lR = 100 μA Reverse breakdown voltage PART IF = 0.5 A, IR = 1 A, iR = 0.25 A Reverse recovery time TYPICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) 100 1000 10 IR - Reverse Current (μA) IF - Forward Current (A) VR = VRRM Tj = 175 °C 1 Tj = 25 °C 0.1 0.01 1 2 3 4 5 6 7 8 VF - Forward Voltage (V) 16463 Fig. 1 - Forward Current vs. Forward Voltage VR = VRRM half sine wave 1.0 0.8 RthJA = 45 K/W l = 10 mm 0.6 0.4 RthJA = 100 K/W PCB: d = 25 mm 0.2 0.0 0 20 40 60 80 100 120 140 160 180 Tamb - Ambient Temperature (°C) Fig. 2 - Max. Average Forward Current vs. Ambient Temperature Rev. 1.8, 11-Sep-12 25 9 50 75 100 125 150 175 Tj - Junction Temperature (°C) 16464 Fig. 3 - Reverse Current vs. Junction Temperature PR - Reverse Power Dissipation (mW) 0 IFAV - Average Forward Current (A) 10 1 0.001 15789 100 700 VR = VRRM 600 500 PR - Limit at 100 % VR 400 300 PR - Limit at 80 % VR 200 100 0 16465 25 50 75 100 125 150 175 Tj - Junction Temperature (°C) Fig. 4 - Max. Reverse Power Dissipation vs. Junction Temperature Document Number: 86059 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SF1200, SF1600 www.vishay.com Vishay Semiconductors CD - Diode Capacitance (pF) 30 f = 1 MHz 25 20 15 10 5 0 0.1 1.0 10.0 100.0 VR - Reverse Voltage (V) 16466 Fig. 5 - Diode Capacitance vs. Reverse Voltage 3.6 (0.142) max. 0.82 (0.032) max. PACKAGE DIMENSIONS in millimeters (inches): SOD-57 26 (1.024) min. 4 (0.157) max. 26 (1.024) min. 20543 Rev. 1.8, 11-Sep-12 Document Number: 86059 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000