VISHAY BAV200_12

BAV200, BAV201, BAV202, BAV203
www.vishay.com
Vishay Semiconductors
Small Signal Switching Diodes, High Voltage
FEATURES
• Silicon epitaxial planar diodes
• AEC-Q101 qualified
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• General purposes
MECHANICAL DATA
Case: QuadroMELF SOD-80
Weight: approx. 34 mg
Cathode band color: black
Packaging codes/options:
GS18/10K per 13" reel (8 mm tape), 10K/box
GS08/2.5K per 7" reel (8 mm tape), 12.5K/box
PARTS TABLE
PART
TYPE
DIFFERENTIATION
ORDERING CODE
TYPE
MARKING
INTERNAL
CONSTRUCTION
REMARKS
BAV200
VRRM = 60 V
BAV200-GS18 or BAV200-GS08
-
Single
Tape and reel
BAV201
VRRM = 120 V
BAV201-GS18 or BAV201-GS08
-
Single
Tape and reel
BAV202
VRRM = 200 V
BAV202-GS18 or BAV202-GS08
-
Single
Tape and reel
BAV203
VRRM = 250 V
BAV203-GS18 or BAV203-GS08
-
Single
Tape and reel
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
Repetitive peak reverse voltage
Reverse voltage
PART
SYMBOL
VALUE
UNIT
BAV200
VRRM
60
V
BAV201
VRRM
120
V
BAV202
VRRM
200
V
BAV203
VRRM
250
V
BAV200
VR
50
V
BAV201
VR
100
V
BAV202
VR
150
V
BAV203
VR
200
V
IF
250
mA
Forward continuous current
Peak forward surge current
tp = 1 s, Tj = 25 °C
IFSM
1
A
f = 50 Hz
IFRM
625
mA
Ptot
500
mW
Repetitive peak forward current
Power dissipation
THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
Thermal resistance junction to ambient air
Junction temperature
Storage temperature range
Rev. 1.7, 31-Jul-12
TEST CONDITION
SYMBOL
VALUE
UNIT
On PC board
50 mm x 50 mm x 1.6 mm
RthJA
500
K/W
Tj
175
°C
Tstg
- 65 to + 175
°C
Document Number: 85544
1
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BAV200, BAV201, BAV202, BAV203
www.vishay.com
Vishay Semiconductors
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
Forward voltage
PART
SYMBOL
IF = 100 mA
Reverse current
MAX.
UNIT
1
V
BAV200
IR
100
nA
VR = 100 V
BAV201
IR
100
nA
VR = 150 V
BAV202
IR
100
nA
VR = 200 V
BAV203
IR
100
nA
Tj = 100 °C, VR = 50 V
BAV200
IR
15
μA
Tj = 100 °C, VR = 100 V
BAV201
IR
15
μA
Tj = 100 °C, VR = 150 V
BAV202
IR
15
μA
Tj = 100 °C, VR = 200 V
BAV203
IR
15
μA
BAV200
V(BR)
60
V
BAV201
V(BR)
120
V
BAV202
V(BR)
200
V
BAV203
V(BR)
250
V
Diode capacitance
VR = 0, f = 1 MHz
CD
1.5
pF
IF = 10 mA
rf
5

IF = IR = 30 mA, iR = 3 mA,
RL = 100 
trr
Differential forward resistance
Reverse recovery time
TYP.
VR = 50 V
IR = 100 μA, tp/T = 0.01,
tp = 0.3 ms
Breakdown voltage
MIN.
VF
50
ns
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
rf - Differential Forward Resistance (Ω)
I R - Reverse Current (µA)
1000
100
Scattering Limit
10
1
VR = VRRM
0.1
0.01
0
40
80
120
160
200
Tj - Junction Temperature (°C)
94 9084
1000
100
Tj = 25 °C
10
1
0.1
94 9089
Fig. 1 - Reverse Current vs. Junction Temperature
1
10
100
I F - Forward Current (mA)
Fig. 3 - Differential Forward Resistance vs. Forward Current
I F - Forward Current (mA)
1000
Tj = 25 °C
100
Scattering Limit
10
1
0.1
0
94 9085
0.4
0.8
1.2
1.6
2.0
V F - Forward Voltage (V)
Fig. 2 - Forward Current vs. Forward Voltage
Rev. 1.7, 31-Jul-12
Document Number: 85544
2
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BAV200, BAV201, BAV202, BAV203
www.vishay.com
Vishay Semiconductors
PACKAGE DIMENSIONS in millimeters (inches): QuadroMELF SOD-80
1.6 (0.063)
1.4 (0.055)
1.
7
(0
.0
gl
as 6 7 )
s
Cathode identification
> R3 (R0.118)
glass
0.47 (0.019) max.
3.7 (0.146)
3.3 (0.130)
The gap between plug and glass can
be either on cathode or anode side
Foot print recommendation:
2.5 (0.098) max.
2 (0.079) min.
1.25 (0.049) min.
5 (0.197) ref.
96 12071
Rev. 1.7, 31-Jul-12
Document Number: 85544
3
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
1
Document Number: 91000