LXES2SBBB4-026 1. Application ESD protection 2. Features IEC61000-4-2(ESD) ±15kV(air),±10kV(contact) Low capacitance : 1.0pF typical Fast turn on and low clamping voltage For 4lines RoHS regulation conformity parts 3. Mechanical details (dimensions : mm) TOP VIEW END VIEW Typ2.9 Typ0.6 +0.05 0.4 -0.10 0.45±0.15 +0.07 0.13 -0.05 4° ±4° (6) (5) (4) Typ0.25 1 pin mark Typ2.8 026 XY Typ1.6 SIDE VIEW Device Code Trace Code (2) (1) (3) +0.15 1.15 -0.25 Typ0.95 1.35max Typ1.9 0.15max No. Terminal name 1 I/O 1 2 GND 3 I/O 2 4 I/O 3 5 VDD 6 I/O 4 1 LXES2SBBB4-026 4. Schematic 5. Maximum Ratings Rating Operating voltage (VDD-GND) ESD per IEC 61000-4-2 (air) ESD per IEC 61000-4-2 (contact) Symbol Value Units VDC 5.5 V ±15 VESD kV ±10 Lead Soldering Temperature TSOL 260(10sec.) o Operating Temperature TOP -40 to +85 o -40 to +125 o Storage Temperature TSTO C C C 6. Electrical characteristics (T=25 oC) Parameter Symbol Conditions Leakage Current (I/O-GND) ILeak Vpin5=5V, Vpin2=0V, VCH=0-5V Breakdown Voltage VBV IBV = 1mA Capacitance (I/O-GND) CIN Vpin5=5V, Vpin2=0V, Vin=2.5V, f=1MHz 2 Min Typ 6 1.0 Max Units 1 μA 9 V pF LXES2SBBB4-026 7. Typical Characteristic 2.0 80 1.5 60 Cline (pF) Voltage(V) 100 40 1.0 0.5 20 0.0 0 -10 0 10 20 30 40 0 50 Time(ns) 8. Soldering Footprint (dimensions : mm) 0.95 2.5 1.4 2 VDC (V) 3 4 Voltage – Capacitance Characteristic ESD Waveform(IEC61000-4-2:8kV Contact) 3.6 1 1.1 0.6 Notes: this land layout is for reference purpose only. 3 5 LXES2SBBB4-026 9. Taping Specification (in mm) 1) Dimensions of Tape (Plastic tape) φ 1.55±0.05 4.00±0.10 0.249±0.019 2.00±0.05 A 1.75±0.10 8.00+0.30 -0.10 3.50±0.50 B B φ 1.00±0.25 4.00±0.10 2.00±0.05 A 3.17±0.10 9°MAX B ― B 2) Dimensions of Reel (in mm) 2.3±0.1 180 φ180max 60.0±0.5 φ13.0±0.2 9.5±1 Φ60.0±0.05 12.3±1 3) Packaging unit: 3000 pcs / reel Note: 1. This datasheet's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 4