MURATA NFM18PS474R0J3D

Noise Suppression Products/EMI Suppression Filters > EMIFILr (Capacitor type) > Single Circuit Type for Large Current
Data Sheet
1
EMIFILr (Capacitor type) Single Circuit Type for Large Current
NFM18PS Series (0603 Size)
c Insertion Loss Characteristics (Main Items)
0.15+0.2
–0.1
c Dimensions
(50Ω - 50Ω)
0
20
0.15+0.2
–0.1
(1)
0.2 min.
NFM18PS474R0J3
Insertion Loss (dB)
0.8±0.1
(2)
(3)
(2)
0.6±0.1
1.6±0.1
0.8+0.2
–0.1
NFM18PS105R0J3
40
60
80
0.4±0.1
100
0.1
: Electrode
1
(in mm)
c Equivalent Circuit
10
100
Frequency (MHz)
1000
6000
c Packaging
Input (Output)
(1)
Code
Packaging
Minimum Quantity
D
180mm Paper Tape
4000
B
Bulk(Bag)
500
Output (Input)
(3)
No polarity.
GND
(2)
c Rated Value (p: packaging code)
Part Number
Operating
Temperature Range
Capacitance
Rated Current
Rated Voltage
Insulation Resistance (min.)
NFM18PS474R0J3p
0.47µF ±20%
2A
6.3Vdc
1000M ohm
-55 to +125°C
NFM18PS105R0J3p
1.0µF ±20%
2A
6.3Vdc
500M ohm
-55 to +105°C
Number of Circuit: 1
c !Caution/Notice
!Caution (Rating)
Do not use products beyond the rated current and
rated voltage as this may create excessive heat
and deteriorate the insulation resistance.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
oThis data sheet is applied for CHIP EMIFILr used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2012.9.6
http://www.murata.com/