VISHAY FEP16AT

FEP16AT THRU FEP16JT
FAST EFFICIENT PLASTIC RECTIFIER
Reverse Voltage - 50 to 600 Volts
Forward Current - 16.0 Amperes
TO-220AB
FEATURES
0.185 (4.70)
0.415 (10.54) MAX.
0.175 (4.44)
0.370 (9.40)
0.360 (9.14)
0.154 (3.91)
0.055 (1.39)
DIA.
0.148 (3.74)
0.045 (1.14)
0.113 (2.87)
0.103 (2.62)
0.145 (3.68)
0.135 (3.43)
0.560 (14.22)
0.530 (13.46)
0.410 (10.41)
0.390 (9.91)
0.350 (8.89)
0.635 (16.13)
0.330 (8.38)
0.625 (15.87)
1
PIN
2
1.148 (29.16)
3
1.118 (28.40)
0.110 (2.79)
0.100 (2.54)
0.160 (4.06)
0.140 (3.56)
♦ Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
♦ Dual rectifier construction, positive centertap
♦ Glass passivated chip junctions
♦ Low power loss
♦ Low forward voltage, high current capability
♦ High surge current capability
♦ Superfast recovery times for high efficiency
♦ High temperature soldering guaranteed:
250°C, 0.16" (4.06mm) from case for 10 seconds
0.560 (14.22)
0.530 (13.46)
0.105 (2.67)
0.095 (2.41)
0.037 (0.94)
0.027 (0.68)
0.105 (2.67)
0.095 (2.41)
MECHANICAL DATA
0.022 (0.56)
0.014 (0.35)
0.205 (5.20)
0.195 (4.95)
PIN 1
PIN 2
PIN 3
CASE
Dimensions are in inches and (millimeters)
Case: JEDEC TO-220AB molded plastic body over
passivated chips
Terminals: Plated leads solderable per MIL-STD-750,
Method 2026
Polarity: As marked
Mounting Position: Any
Mounting Torque: 5 in. - lbs. max.
Weight: 0.08 ounce, 2.24 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
FEP
SYMBOLS 16AT
FEP
16BT
FEP
16CT
FEP
16DT
FEP
16FT
FEP
16GT
FEP
16HT
FEP
16JT
UNITS
Maximum repetitive peak reverse voltage
VRRM
50
100
150
200
300
400
500
600
Volts
Maximum RMS voltage
VRMS
35
70
105
140
210
280
350
420
Volts
Maximum DC blocking voltage
VDC
50
100
150
200
300
400
500
600
Volts
Maximum average forward rectified current
at TC=100°C
I(AV)
16.0
Amps
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method)
IFSM
200.0
Amps
Maximum instantaneous forward voltage per leg
at 8.0A
VF
Maximum DC reverse current
at rated DC blocking voltage per leg
IR
TC=25°C
TC=100°C
Maximum reverse recovery time (NOTE 1)
per leg
trr
Typical Junction Capacitance per leg (NOTE 2)
CJ
Typical thermal resistance (NOTE 3)
Operating junction and storage temperature range
1.3
1.5
10.0
500.0
35.0
µA
50.0
85.0
Volts
ns
60.0
pF
RΘJA
RΘJC
15.0
2.2
°C/W
TJ, TSTG
-55 to +150
°C
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient and from junction to case per leg mounted on heatsink
4/98
0.95
RATINGS AND CHARACTERISTICS CURVES FEP16AT THRU FEP16JT
FIG. 2 - MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
20
RESISTIVE OR INDUCTIVE LOAD
16
12
8.0
4.0
0
0
50
100
150
CASE TEMPERATURE, °C
300
PEAK FORWARD SURGE CURRENT,
AMPERES
AVERAGE FORWARD CURRENT,
AMPERES
FIG. 1 - FORWARD CURRENT DERATING CURVE
8.3ms SINGLE HALF SINE-WAVE
(JEDEC Method)
250
200
150
100
50
0
1
10
100
NUMBER OF CYCLES AT 60 HZ
FIG. 4 -TYPICAL REVERSE CHARACTERISTICS
PER LEG
100
40
50-400V
500-600V
10
TJ=125°C
PULSE WIDTH=300µs
1% DUTY CYCLE
1
TJ=25°C
50-400V
300-400V
500-600V
0.1
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
INSTANTANEOUS FORWARD VOLTAGE,
VOLTS
INSTANTANEOUS REVERSE LEAKAGE CURRENT,
MICROAMPERES
INSTANTANEOUS FORWARD CURRENT,
AMPERES
FIG. 3- TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS PER LEG
10
5°C
12
TJ=
00°C
TJ=1
1
0.1
TJ=25°C
0.01
0
FIG. 5 - TYPICAL JUNCTION CAPACITANCE PER LEG
JUNCTION CAPACITANCE, pF
1,000
TJ=125°C
f=1.0 MHZ
Vsig=50mVp-p
100
50-400V
500-600V
10
0.1
1
10
REVERSE VOLTAGE, VOLTS
100
20
40
60
80
PERCENT OF RATED PEAK REVERSE
VOLTAGE, %
100