SCA3060 Digital Low Cost Low Power Automotive Qualified 3-axis Accelerometer Murata Electronics Oy SCA3060 Digital Low Cost Low Power Automotive Qualified 3-axis Accelerometer Key features Applications • • • • • • • • SCA3060 is targeted to automotive security applications such as • Inertial navigation • Vehicle alarms • Inclination sensing • Motion activation • Black box systems Robust packaging makes the sensor also suitable for Industrial applications. • • • • • • Size 7.6 x 3.3 x 8.6 mm (w x h x l) ± 2 g measurement range -40…+105 ºC temperature range 3.0 V – 3.6 V supply voltage Low current consumption Measurement mode 150 µA Total offset error ±200 mg Includes effects over supply voltage, temperature and life time RoHS compliant AEC Q-100 qualified High shock durability Interrupt signal triggered by motion Selectable frequency response 64 samples/axis ring buffer memory and advanced features enable significant power and resource savings SCA3060 PERFORMANCE CHARACTERISTICS Parameter Condition SCA 3060-D01 (SPI) Units Min Typ. Max Analog and digital Vdd 3.0 3.3 3.6 V Operating temperature -40 - 105 °C - <9 150 - µA µA mg Current consumption Reset Measurement/MD mode - ±2 -200 - 200 - 1000 - Total sensitivity error -4 ±2 4 % Non-linearity -3 ±1 3 % FS - ±3 - Acceleration range Nominal Total offset error -40 ... +105 ºC Sensitivity Cross-axis sensitivity g Count/g % Bandwidth Measurement mode Wide band mode 9 35 Hz Hz Noise Measurement mode Wide band mode 9 16 mg RMS mg RMS Output data rate Measurement mode Wide band mode 50 100 Start-up time - Output load - SPI clock rate / I2C clock rate 200 Hz Hz - ms - 35 pF - 325 kHz for more information, please refer to the product datasheets available ONLINE at www.murataMEMS.fi Murata Electronics Oy Myllynkivenkuja 6 P.O. Box 27 FI-01621 Vantaa www.muratamems.fi