SURFACE MOUNT LED LAMP POWER PLCC-4 QTLP673C-O Yellow-Orange QTLP673C-R Red QTLP673C-IG True Green QTLP673C-Y Yellow QTLP673C-IB Blue QTLP673C QTLP673C-E Orange QTLP673C-IC Cyan PACKAGE DIMENSIONS 0.134 (3.4) 0.118 (3.0) 1 0.118 (3.0) 0.102 (2.6) 3 0.094 (2.4) 0.078 (2.0) 2 4 Polarity Marking TOP 0.035 (0.9) 0.028 (0.7) 0.094 (2.4) 0.024 (0.6) 0.016 (0.4) 0.083 (2.1) 0.067 (1.7) 0.004 (0.10) 0.149 (3.8) 0.134 (3.4) 0.043 (1.1) 0.020 (0.5) SIDE 2 NOTE: Dimensions fo all drawings are in APPLICATIONS 1 3 4 • Automotive interior lighting • Status indication for consumer electronics and office equipment POLARITY • Information display lighting DESCRIPTION This ultra bright high current surface mount LED is designed with flat top and sides for the ease of pick-and-place by automatic placement equipment. It is compatible with both IR reflow and TTW (Through-the-Wave) soldering. These LEDs are ideal for backlighting and optical coupling into light pipes. FEATURES • Small package dimensions of 3.2(L) x 2.8(W) x 1.8(H) mm • AllnGaP technology for -Y, -O, -R, and -E • InGaN technology for -IB, -IC, and -IG • Wide viewing angle of 120° • Water clear optics • Available in 0.315" (8mm) width tape on 7" (178mm) diameter reel; 2,000 units per reel Page 1 of 9 8/21/03 SURFACE MOUNT LED LAMP POWER PLCC-4 QTLP673C-O Yellow-Orange QTLP673C-R Red QTLP673C-IG True Green QTLP673C QTLP673C-Y Yellow QTLP673C-IB Blue QTLP673C-E Orange QTLP673C-IC Cyan ABSOLUTE MAXIMUM RATINGS (TA =25°C Unless otherwise specified) Parameter Continuous Forward Current Symbol QTLP673C-Y/-E/-O/-R Units IF 70 mA Peak Forward Current (f = 100 KHz, Duty Factor = 1/10) IFM 100 mA Reverse Voltage VR 5 V Power Dissipation PD 180 mW Junction Temperature TJ 125 °C Operating Temperature TOPR -40 to +100 °C Storage Temperature TSTG -40 to +100 °C Lead Soldering Time TSOL 260 for 5 sec °C ELECTRICAL / OPTICAL CHARACTERISTICS (TA =25°C) QTLP673C Part Number Symbol Condition -Y -E -O -R T1: 285-355 T1: 285-355 T1: 285-355 T1: 285-355 T2: 355-450 T2: 355-450 T2: 355-450 T2: 355-450 U1: 450-560 U1: 450-560 U1: 450-560 U1: 450-560 U2: 560-715 U2: 560-715 U2: 560-715 U2: 560-715 2.0-2.3 2.0-2.3 2.0-2.3 2.0-2.3 2.3-2.6 2.3-2.6 2.3-2.6 2.3-2.6 W: 582-585 W: 610-615 W: 600-603 — X: 585-588 X: 615-621 X: 603-606 — Y: 588-591 — Y: 606-609 — Z: 591-594 — Z: 609-612 — — — — Full: 620-630 120 120 120 120 Luminous Intensity (mcd) IV IF = 50mA Forward Voltage (V) 51 52 VF IF = 50mA Dominant Wavelength (nm) λD Viewing Angle (°) 2Θ1/2 Page 2 of 9 IF = 50mA IF = 50mA 8/21/03 SURFACE MOUNT LED LAMP POWER PLCC-4 QTLP673C-O Yellow-Orange QTLP673C-R Red QTLP673C-IG True Green QTLP673C QTLP673C-Y Yellow QTLP673C-IB Blue QTLP673C-E Orange QTLP673C-IC Cyan ABSOLUTE MAXIMUM RATINGS (TA =25°C Unless otherwise specified) Parameter Symbol QTLP673C-IG/IC/IB Units Continuous Forward Current IF 30 mA Peak Forward Current (f = 100 KHz, Duty Factor = 1/10) IFM 200 mA Reverse Voltage VR 5 V Power Dissipation PD 135 mW Junction Temperature TJ 125 °C Operating Temperature TOPR -40 to +100 °C Storage Temperature TSTG -40 to +100 °C Lead Soldering Time TSOL 260 for 5 sec °C ELECTRICAL / OPTICAL CHARACTERISTICS (TA =25°C) QTLP673C Part Number Symbol Condition -IG -IB -IC T1: 285-355 Q2: 90-112.5 T1: 285-355 T2: 355-450 R1: 112.5-140 T2: 355-450 U1: 450-560 R2: 140-180 U1: 450-560 U2: 560-715 S1: 180-224 U2: 560-715 V1: 715-900 S2: 280-355 V1: 715-900 Luminous Intensity (mcd) IV V2: 900-1125 IF = 30mA V2: 900-1125 Forward Voltage (V) Typ Max VF 3.9 3.9 3.9 4.55 4.55 4.55 W: 520-524 W: 464-468 W: 499-503 X: 524-528 X: 468-472 X: 503-507 Y: 528-532 Y: 472-476 Y: 507-511 Z: 532-536 Z: 476-480 — — — — 120 120 120 IF = 30mA Dominant Wavelength (nm) λD Viewing Angle (°) 2Θ1/2 IF = 30mA IF = 30mA Tolerance for Luminous Intesity (IV): ±11% Tolerance for VF: ±0.1V Tolerance for λD: ±1nm Page 3 of 9 8/21/03 SURFACE MOUNT LED LAMP POWER PLCC-4 QTLP673C-O Yellow-Orange QTLP673C-R Red QTLP673C-IG True Green QTLP673C QTLP673C-Y Yellow QTLP673C-IB Blue QTLP673C-E Orange QTLP673C-IC Cyan TYPICAL PERFORMANCE CURVES QTLP673C-O/-R/-Y/-E Fig. 1 Forward Current (mA) vs. Forward Voltage Relative Intensity, Normalized at 50mA. Fig. 2 Relative Luminuous Intensity vs. Forward Current 100 90 Forward Current (mA) 80 70 60 50 40 30 20 10 0 1.4 1.6 1.8 2.0 2.2 1.4 1.2 1 0.8 0.6 0.4 0.2 0 2.4 0 FORWARD VOLTAGE (V) 10 20 30 40 50 60 70 80 FORWARD CURRENT (mA) Fig. 3 Relative Intensity vs. Peak Wavelength Y 1.0 O E R 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 500 550 600 650 700 750 800 WAVELENGTH (nm) Fig. 4 Radiation Diagram Fig. 5 Maximum Forward Current vs. Ambient Temperature 80 -30° -20° -10° 0° 10° 20° -40° 30° 40° -50° 50° -60° 60° -70° 70° -80° -90° 80° 1.0 0.8 0.6 0.4 0.2 0 0.2 90° 0.4 0.6 0.8 1.0 REL. LUMINOUS INTENSITY (%) IF - FORWARD CURRENT (mA) RELATIVE INTENSITY 0.9 70 60 50 40 30 20 10 0 0 10 20 30 40 50 60 70 80 90 100 AMBIENT TEMPERATURE TA (°C) Page 4 of 9 8/21/03 SURFACE MOUNT LED LAMP POWER PLCC-4 QTLP673C-O Yellow-Orange QTLP673C-R Red QTLP673C-IG True Green QTLP673C QTLP673C-Y Yellow QTLP673C-IB Blue QTLP673C-E Orange QTLP673C-IC Cyan TYPICAL PERFORMANCE CURVES QTLP673C-IC/-IB/-IG Fig. 1 Forward Current (mA) vs. Forward Voltage Relative Intensity, Normalized at 30mA. Fig. 2 Relative Luminuous Intensity vs. Forward Current 60 Forward Current (mA) 50 40 30 20 10 0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 1.8 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2 0 0 5.0 10 FORWARD VOLTAGE (V) 20 30 40 50 60 FORWARD CURRENT (mA) Fig. 3 Relative Intensity vs. Peak Wavelength 1.0 0.9 Blue 0.8 Relative Intensity 0.7 Cyan 0.6 0.5 True Green 0.4 0.3 0.2 0.1 0.0 400 450 500 550 600 650 700 750 800 Wavelength (nm) Fig. 4 Radiation Diagram Fig. 5 Maximum Forward Current vs. Ambient Temperature -30° -20° -10° 0° 10° 20° -40° 30° 40° -50° 50° -60° 60° -70° 70° -80° -90° 80° 1.0 0.8 0.6 0.4 0.2 0 0.2 90° 0.4 0.6 0.8 1.0 REL. LUMINOUS INTENSITY (%) IF - FORWARD CURRENT (mA) 35 30 25 20 15 10 5 0 0 10 20 30 40 50 60 70 80 90 100 AMBIENT TEMPERATURE TA (°C) Page 5 of 9 8/21/03 SURFACE MOUNT LED LAMP POWER PLCC-4 QTLP673C-O Yellow-Orange QTLP673C-R Red QTLP673C-IG True Green QTLP673C-Y Yellow QTLP673C-IB Blue QTLP673C QTLP673C-E Orange QTLP673C-IC Cyan RECOMMENDED PRINTED CIRCUIT BOARD PATTERN 0.102 [2.59] 0.043 [1.09] 0.059 [1.50] 0.177 [4.50] RECOMMENDED IR REFLOW SOLDERING PROFILE 300 T(°C) 250 240-245°C 10-40s 200 183°C Ramp-down rate up to 6°C/s 120 to 180s 150 Defined for Preconditioning up to 6°C/s 100 Ramp-up rate up to 6°C/s 50 Defined for Preconditioning 2-3°C/s 0 0 25 50 75 100 125 150 Page 6 of 9 175 200 225 t(sec.) 250 8/21/03 SURFACE MOUNT LED LAMP POWER PLCC-4 QTLP673C-O Yellow-Orange QTLP673C-R Red QTLP673C-IG True Green QTLP673C QTLP673C-Y Yellow QTLP673C-IB Blue QTLP673C-E Orange QTLP673C-IC Cyan RECOMMENDED TTW REFLOW SOLDERING PROFILE 300 standard curve 10s T(°C) limit curves 250 235°C...260°C 2nd 200 1st cs 200°C/s 150 5°C/s 2°C/s 100°C...130°C 100 50 2°C/s forced cooling 0 0 25 50 75 100 125 150 175 200 225 t(sec.) 250 ORDERING INFORMATION Orderable Part Number Color Package QTLP673C-OTR Yellow-Orange Power PLCC-4 QTLP673C-RTR Red Power PLCC-4 QTLP673C-IGTR True Green Power PLCC-4 QTLP673C-YTR Yellow Power PLCC-4 QTLP673C-IBTR Blue Power PLCC-4 QTLP673C-ETR Orange Power PLCC-4 QTLP673C-ICTR Cyan Power PLCC-4 Page 7 of 9 8/21/03 SURFACE MOUNT LED LAMP POWER PLCC-4 QTLP673C-O Yellow-Orange QTLP673C-R Red QTLP673C-IG True Green QTLP673C QTLP673C-Y Yellow QTLP673C-IB Blue QTLP673C-E Orange QTLP673C-IC Cyan TAPE AND REEL DIMENSIONS 8.4 +1.5 -0.0 11.0 +0.5 -0.0 5 Ø62.0±0.5 2.5 0± 0 .5 Ø180±1 ±0. 2.5 Ø12.75 +0.25 -0.0 4.0 8.0 Ø1.55±.05 4.0 0.229±0.01 3.81±0.1 2.0±0.05 3.5±0.05 1.75 Progressive direction 2.29±0.1 3.12 Dimensional tolerance is ± 0.1mm unless otherwise specified Angle: ± 0.5 Unit: mm Page 8 of 9 8/21/03 SURFACE MOUNT LED LAMP POWER PLCC-4 QTLP673C-O Yellow-Orange QTLP673C-R Red QTLP673C-IG True Green QTLP673C-Y Yellow QTLP673C-IB Blue QTLP673C QTLP673C-E Orange QTLP673C-IC Cyan DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Page 9 of 9 8/21/03