SURFACE MOUNT LED LAMP SUPER BRIGHT 1.8 mm (Dome Lens) QTLP660C-R Red QTLP660C-E Orange QTLP660C-O Yellow-Orange QTLP660C-Y Yellow QTLP660C-AG Yellow-Green QTLP660C-IG True Green QTLP660C-IB Blue PACKAGE DIMENSIONS Ø0.075 (1.9) Ø0.067 (1.7) 0.134 (3.40) 0.118 (3.00) CATHODE 0.102 (2.6) 0.087 (2.2) 0.091 (2.3) 0.083 (2.1) TOP R0.004 (0.1) 5° 7° 0.024 (0.6) 0.016 (0.4) 0.106 (2.7) 0.098 (2.5) SIDE 0.028 (0.7) 0.020 (0.5) 0.079 (2.0) BOTTOM + - APPLICATIONS POLARITY • Backlighting NOTE: • Status indication for consumer electronics and other Dimensions for all drawings are in inches (mm). equipment DESCRIPTION These super bright surface mount chip LEDs are designed with a 1.8 mm dome lens that focuses the light output. FEATURES • Small footprint - 3.2(L) X 2.4(W) X 2.6(H) mm • AllnGaP technology for -R, -E, -O, -Y and -AG • InGaN/SiC technology for -IG and -IB • Narrow viewing angle of 30° • Water clear optics • Moisture-proof packaging • Available in 0.315” (8mm) width tape on 7” (178mm) diameter reel; 2,000 units per reel 2001 Fairchild Semiconductor Corporation DS300103 8/31/01 1 OF 8 www.fairchildsemi.com SURFACE MOUNT LED LAMP SUPER BRIGHT 1.8 mm (Dome Lens) QTLP660C-R Red QTLP660C-E Orange QTLP660C-O Yellow-Orange QTLP660C-Y Yellow QTLP660C-AG Yellow-Green QTLP660C-IG True Green QTLP660C-IB Blue ABSOLUTE MAXIMUM RATINGS Parameter Continuous Forward Current Peak Forward Current (f = 1.0 KHz, Duty Factor = 1/10) Reverse Voltage Power Dissipation Operating Temperature Storage Temperature Lead Soldering Time Symbol IF -R 30 -E 30 IFM 160 160 VR PD TOPR TSTG TSOL 5 72 5 72 ABSOLUTE MAXIMUM RATINGS Parameter Continuous Forward Current Peak Forward Current (f = 1.0 KHz, Duty Factor = 1/10) Reverse Voltage Power Dissipation Operating Temperature Storage Temperature Lead Soldering Time www.fairchildsemi.com (TA =25°C Unless otherwise specified) QTLP660C -O 30 Units -Y 25 -AG 30 160 120 160 mA 5 72 -40 to +85 -40 to +90 260 for 5 sec 5 60 5 72 V mW °C °C °C mA (TA =25°C Unless otherwise specified) Symbol QTLP660C Units IF -IB 30 -IG 30 IFM 100 100 mA VR PD TOPR TSTG TSOL 5 120 5 120 V mW °C °C °C mA -40 to +85 -40 to +90 260 for 5 sec 2 OF 8 8/31/01 DS300103 SURFACE MOUNT LED LAMP SUPER BRIGHT 1.8 mm (Dome Lens) QTLP660C-R Red QTLP660C-E Orange QTLP660C-O Yellow-Orange QTLP660C-Y Yellow QTLP660C-AG Yellow-Green QTLP660C-IG True Green QTLP660C-IB Blue ELECTRICAL / OPTICAL CHARACTERISTICS Part Number Luminous Intensity (mcd) Minimum Typical Forward Voltage (V) Maximum Typical Wavelength (nm) Peak Dominant Spectral Line Half Width (nm) Viewing Angle (°) -R -E QTLP660C -O -Y -AG IV 150 400 150 400 150 400 150 400 110 160 IF = 20mA VF 2.4 2.0 2.4 2.0 2.4 2.0 2.4 2.0 2.4 2.0 IF = 20mA 630 624 20 30 620 615 18 30 610 605 18 30 590 589 15 30 575 573 20 30 IF = 20mA Symbol DP DD D 201/2 ELECTRICAL / OPTICAL CHARACTERISTICS Part Number Luminous Intensity (mcd) Minimum Typical Forward Voltage (V) Maximum Typical Wavelength (nm) Peak Dominant Spectral Line Half Width (nm) Viewing Angle (°) DS300103 8/31/01 (TA =25°C) Symbol Condition IF = 20mA IF = 20mA (TA =25°C) QTLP660C Condition -IB -IG IV 110 150 500 900 IF = 20mA VF 4.0 3.5 4.0 3.5 IF = 20mA 465 470 25 30 520 525 35 30 IF = 20mA DP DD D 201/2 3 OF 8 IF = 20mA IF = 20mA www.fairchildsemi.com SURFACE MOUNT LED LAMP SUPER BRIGHT 1.8 mm (Dome Lens) QTLP660C-R Red QTLP660C-E Orange QTLP660C-O Yellow-Orange QTLP660C-Y Yellow QTLP660C-AG Yellow-Green QTLP660C-IG True Green QTLP660C-IB Blue TYPICAL PERFORMANCE CURVES (QTLP660C-R, -E, -O, -Y and -AG) Fig. 1 Forward Current vs. Forward Voltage Fig. 2 Relative Luminous Intensity vs. DC Forward Current 2.5 RELATIVE LUMNOUS INTENSITY (NORMALIZED AT 20 mA) IF - FORWARD CURRENT (mA) 100 90 80 70 60 50 40 30 20 10 0 1.0 1.5 2.0 2.5 2.0 1.5 1.0 0.5 0.0 3.0 0 VF - FORWARD VOLTAGE (V) 10 20 30 40 50 IF - DC FORWARD CURRENT (mA) Fig. 3 Relative Intensity vs. Peak Wavelength AG RELATIVE INTENSITY 1.0 Y O E R 0.5 0 500 550 600 650 700 WAVELENGTH (nm) -30˚ -20˚ -10˚ 0˚ 10˚ 20˚ -40˚ Fig.5 Maximum Forward Current vs. Ambient Temperature IF - FORWARD CURRENT (mA) Fig.4 Radiation Diagram 30˚ 40˚ -50˚ 50˚ -60˚ 60˚ -70˚ 70˚ -80˚ 80˚ -90˚ 1.0 0.8 0.6 0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 90˚ REL. LUMINOUS INTENSITY (%) www.fairchildsemi.com 50 40 R, E, O and AG 30 Y 20 10 0 0 25 50 75 100 AMBIENT TEMPERATURE TA (˚C) 4 OF 8 8/31/01 DS300103 SURFACE MOUNT LED LAMP SUPER BRIGHT 1.8 mm (Dome Lens) QTLP660C-R Red QTLP660C-E Orange QTLP660C-O Yellow-Orange QTLP660C-Y Yellow QTLP660C-AG Yellow-Green QTLP660C-IG True Green QTLP660C-IB Blue TYPICAL PERFORMANCE CURVES (QTLP660C-IG and IB) Fig. 1 Forward Current vs. Forward Voltage Fig. 2 Relative Luminous Intensity vs. DC Forward Current 2.5 RELATIVE LUMNOUS INTENSITY (NORMALIZED AT 20 mA) IF - FORWARD CURRENT (mA) 100 90 80 70 60 50 IG 40 IB 30 20 10 0 2.0 2.5 3.0 3.5 4.0 4.5 2.0 1.5 1.0 0.5 0.0 5.0 0 VF - FORWARD VOLTAGE (V) 10 20 30 40 50 IF - DC FORWARD CURRENT (mA) Fig. 3 Relative Intensity vs. Peak Wavelength IB IG RELATIVE INTENSITY 1.0 0.5 0 400 450 500 550 600 650 WAVELENGTH (nm) -30˚ -20˚ -10˚ 0˚ 10˚ 20˚ Fig.5 Maximum Forward Current vs. Ambient Temperature 30˚ -40˚ 40˚ -50˚ 50˚ -60˚ 60˚ -70˚ 70˚ -80˚ 80˚ -90˚ 1.0 0.8 0.6 0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 90˚ REL. LUMINOUS INTENSITY (%) DS300103 8/31/01 IF - FORWARD CURRENT (mA) Fig.4 Radiation Diagram 50 40 30 20 10 0 0 25 50 75 100 AMBIENT TEMPERATURE TA (˚C) 5 OF 8 www.fairchildsemi.com SURFACE MOUNT LED LAMP SUPER BRIGHT 1.8 mm (Dome Lens) QTLP660C-R Red QTLP660C-E Orange QTLP660C-O Yellow-Orange QTLP660C-Y Yellow QTLP660C-AG Yellow-Green QTLP660C-IG True Green QTLP660C-IB Blue RECOMMENDED PRINTED CIRCUIT BOARD PATTERN 0.079 (2.00) 0.098 (2.50) 0.098 (2.50) 0.098 (2.50) RECOMMENDED IR REFLOW SOLDERING PROFILE 5 sec MAX soldering time 240° C MAX +5° C/s MAX -5° C/s MAX 60 - 120 sec Preheating 120 - 150° C MAX www.fairchildsemi.com 6 OF 8 8/31/01 DS300103 SURFACE MOUNT LED LAMP SUPER BRIGHT 1.8 mm (Dome Lens) QTLP660C-R Red QTLP660C-E Orange QTLP660C-O Yellow-Orange QTLP660C-Y Yellow QTLP660C-AG Yellow-Green QTLP660C-IG True Green QTLP660C-IB Blue TAPE AND REEL DIMENSIONS 13.2±1.5 2.5±0.5 Ø178.0±1.0 Ø60.2±0.5 2.5±0.5 16.0±0.2 Ø13.0±0.5 2.0±0.05 4.0 1.55±0.05 Polarity DS300103 8/31/01 4.0 2.6 7 OF 8 3.4±0.1 5.5 0.230±0.1 12.0 1.75 Progressive direction 2.75 www.fairchildsemi.com SURFACE MOUNT LED LAMP SUPER BRIGHT 1.8 mm (Dome Lens) QTLP660C-R Red QTLP660C-E Orange QTLP660C-O Yellow-Orange QTLP660C-Y Yellow QTLP660C-AG Yellow-Green QTLP660C-IG True Green QTLP660C-IB Blue DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body,or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in labeling, can be reasonably expected to result in a significant injury of the user. www.fairchildsemi.com 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 8 OF 8 8/31/01 DS300103