PL IA NT Features CO M ■ Single pole/double throw ■ Meets EIA/EIAJ/IPC/VRCI SMD standard outline dimensions *R oH S ■ Compatible with most surface mount manufacturing processes ■ 50 or 2000 cycle rotational life ■ Compatible with popular vacuum pick-andplace equipment ■ J-hook, gull-wing and through hole ■ RoHS compliant* - see processing information on RoHS compliant surface mount components ■ For switch applications/processing guidelines, click here 7814 SMD 4 mm Square Sealed Rotary Switch C ADJUSTMENT SLOT 5.00 4.50 (.197) (.177) 051 CW X CCW X 0.20 TYP. (.008) 6.30 4.50 (.248) (.177) 2.45 LONG (.096) 051 0.51 WIDE (.020) 2.55 (.100) 0.51 DEEP (.020) CW 4.00 (.157) TYP. CCW RECOMMENDED PCB LAYOUT 1.30 ± 0.10 (.051 ± .004) 2.0 (.079) 4.0 (.157) 1.00 (.039) 3 PLCS. 0.80 ± 0.10 (.031 ± .004) 2 PLCS. 0.60 ± 0.10 (.024 ± .004) 3 PLCS. 2.55 (.100) RECOMMENDED PCB LAYOUT 2.55 (.100) 5.00 (.197) 2.3 (.091) 2.35 (.093) 7814G Gull Wing 4.50 (.177) 0.80 TYP. DIA. (.031) 7814Z Right Angle 4.50 (.177) C 4.50 (.177) 051 CW 2.55 (.100) 2.0 (.079) 3 PLCS. 1.3 (.051) 2 PLCS. CCW 5° MAX. TYP. ADJUSTMENT SLOT 2.45 LONG (.096) 0.51 X WIDE (.020) ROTOR POSITIONED AS SHOWN WITHIN ± 22˚ OF CENTERLINE OF TERMINAL 2 0.60 (.024) TYP. 0.55 X DEEP (.022) 0.20 (.008) TYP. 2.55 (.100) 023 1 C 3 2.30 (.091) 1.30 (.051) 2 PLCS. 0.80 ± 0.10 (.031 ± .004) 2 PLCS. 7814 J - 1 - 051 E 6.20 (.244) 5.50 (.217) 1.30 (.051) 3 PLCS. 1.30 ± 0.10 (.051 ± .004) 2.00 (.079) 5.00 (.197) Circuit Diagram - 7814J, G ,H CCW 3 *RoHS Directive 2002/95/EC Jan 27, 2003 including Annex. †“Fluorinert” is a registered trademark of 3M Co. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 2.54 (.100) 1.27 (.050) 3.18 (.226) 0.61 (.024) 1.29 (.050) 5.01 (.197) 5.60 (.220) 0.21 (.084) 3.48 (.138) 2.01 (.080) 2.01 (.080) Circuit Diagram - 7814Z C 2 2 CW 0.96 (.038) RECOMMENDED PCB LAYOUT 2.54 0.26 (.100) (.010) 2.01 1.30 (.080) (.051) 1.19 (.047) C 1 3.32 (.130) ADJ. SLOT 3.08 2.41 (.121) (.095) LONG 0.51 X (.020) WIDE 0.60 X (.024) DEEP 5.76 (.226) RECOMMENDED PCB LAYOUT 2.35 (.093) How to Order Model Terminal J = J-Hook G = Gull Wing H = Through-hole Z = Right Angle Switch Type 1 = SPDT Rotational Life -051 = 50 Cycles -023 = 2000 Cycles Optional Embossed Tape Designator (For pin styles J, G, Z only - omit for tube packaging) 5.00 ± 0.10 (.197 ± .004) OUTSIDE WHEN PINS ARE PARALLEL 4.50 (.177) C 7A Environmental Characteristics Vibration ......................................... 20 G Shock ........................................... 100 G Thermal Shock ........................(5 cycles) -55 °C to +125 °C Humidity Insulation Resistance ............................... 10 megohms min. Rotational Life -051 ..................................... 50 Cycles -023 ................................. 2000 Cycles Packaging Options J & G ..................................... 500 pcs. Z ............................................ 200 pcs. H....................................100 pcs./tube 7814H Throughhole 4.50 (.177) 2E Mechanical Characteristics Positions ...............................................2 Adjustment Torque ......... 1.8 N-cm max. Stop Strength .................. 2.5 N-cm min. Pushover Strength (Z Style) ......................... 2 kilograms minimum Weight ................Approximately 0.2 gm. Marking........................... Manufacturer’s trademark, life code and date code 7814J J-Hook 7A General Characteristics Switch Type ...................................SPDT Operating Temp. Range ............................... -55 °C to +125 °C Storage Temp. Range ..-55 °C to +125 °C Seal Test ......................85 °C Fluorinert† Product Dimensions 7A Electrical Characteristics Contact Rating Maximum Current ..........100 mA max. Maximum Voltage ........................16 V Contact Timing ..................Non-shorting Contact Resistance ........... 2 ohms max. Insulation Resistance ............................. 100 megohms min. Dielectric Strength .................... 250 VAC CCW 1 DIMENSIONS: 3 CW MM (INCHES) TOLERANCES: ±2 EXCEPT WHERE NOTED.