PL IA NT CO M *R oH S Features Applications ■ Four unidirectional ESD protections ■ High speed data ports ■ RoHS compliant* ■ Mobile phones & accessories ■ Low capacitance ■ Video/graphics cards ■ Surge protection ■ Set top boxes ■ Communication systems CDSOT353-T05 - TVS Diode Quad Array General Information The CDSOT353-T05 device provides ESD, EFT and Surge protection for high speed data ports meeting IEC 61000-4-2 (ESD), IEC 61000-4-4 (EFT) and IEC 61000-4-5 (Surge) requirements. The Transient Voltage Suppressor array offers a Working Peak Reverse Voltage of 5.0 V and Minimum Breakdown Voltage of 6.0 V. I/O 1 I/O 4 GND The SOT353 packaged device will mount directly onto the industry standard SOT353 footprint. Bourns® Chip Diodes are easy to handle with standard pick and place equipment and their flat configuration minimizes roll away. I/O 2 I/O 3 Electrical & Thermal Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Symbol CDSOT353-T05 Unit Peak Pulse Power (tp = 8/20 µs) (NOTE 1) PPK 25 W Storage Temperature TSTG -55 to +150 ºC Operating Temperature TOPR -55 to +125 ºC Minimum Breakdown Voltage @ 1 mA VBR 6.0 V Working Peak Voltage VM 5.0 V Maximum Clamping Voltage @ IP = 2 A VP 13 V Maximum Leakage Current @ 3 V IL 1 µA Typical Capacitance 2.5 V @ 1 MHz C 9.5 pF Notes: 1. See Peak Pulse Power vs. Pulse Time. Asia-Pacific: Tel: +886-2 2562-4117 • Fax: +886-2 2562-4116 Europe: Tel: +41-41 768 5555 • Fax: +41-41 768 5510 The Americas: Tel: +1-951 781-5500 • Fax: +1-951 781-5700 www.bourns.com *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications CDSOT353-T05 - TVS Diode Quad Array Product Dimensions Recommended Footprint This is an RoHS compliant molded SOT353 package with 100 % Matte Sn on the lead frame. It weighs approximately 15 mg and has a flammability rating of UL 94V-0. 2.65 (.104) 2.40 (.094) 1.30 (.051) G A 1 2.10 (.083) F D I 0.90 (.035) I 5 0.50 (.020) 4 PLCS. 2 2.35 (.093) 0.40 (.016) H 3 4 E 0.55 (.022) 5 PLCS. Q1 C B Typical Part Marking MM (INCHES) DIMENSIONS: CDSOT353-T05............................................................................ D5 How to Order Dimension Min. Max. A 0.80 (0.031) 1.10 (0.043) B 0.15 (0.006) 0.30 (0.012) C 0.10 (0.004) 0.18 (0.007) Model T = Transient Voltage Suppressor D 1.80 (0.071) 2.20 (0.087) Working Peak Reverse Voltage 05 = 5 VRWM (Volts) E 1.15 (0.045) 1.35 (0.053) F - 0.10 (0.004) G 0.80 (0.031) 1.00 (0.039) H 1.80 (0.071) 2.40 (0.094) Common Diode Chip Diode Package SOT353 = SOT353 Package 0.65 TYP. (0.026) I Q1 CD SOT353 - T 05 0.10 (0.004) 0.40 (0.016) Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications CDSOT353-T05 - TVS Diode Quad Array Rating & Characteristic Curves Non-Repetitive Peak Pulse Power vs. Pulse Time Pulse Waveform TJ = 25 °C, tp (μs) = 8/20 μs exponentially decay waveform IPP – Peak Pulse Current (% of IPP) PPP – Peak Pulse Power (W) 1000 100 10 1 10 1 100 1000 120 tt = 8 μs td = 20 μs 80 et 60 40 Td = t|Ipp/2 20 0 0 10000 Test Waveform Parameters tt 100 5 10 15 20 25 30 t – Time (µs) td – Pulse Duration (µs) Peak Pulse Power vs. Junction Temperature Typical Junction Capacitance 1.2 12 0.8 Capacitance (pF) Ppp / Ppp (25 °C) 10 0.4 8 6 4 2 0 TJ=25 °C, f=1 MHz, Vosc=1 V 0 0 50 100 150 200 Junction Temperature (°C) Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications 6 1 2 Reverse Voltage (V) 3 4 CDSOT353-T05 - TVS Diode Quad Array Packaging Information The product will be dispensed in tape and reel format (see diagram below). P 0 P 1 d T E Index Hole 120 ° F D2 W B D1 D P A Trailer ....... ....... End C Device ....... ....... ....... ....... Leader ....... ....... W1 Start DIMENSIONS: 10 pitches (min.) 10 pitches (min.) Direction of Feed Item Symbol CDSOT353 Carrier Width A 2.25 ± 0.10 (0.088 ± 0.004) Carrier Length B 2.34 ± 0.10 (0.092 ± 0.004) Carrier Depth C 1.22 ± 0.10 (0.048 ± 0.004) Sprocket Hole d 1.55 ± 0.05 (0.061 ± 0.002) Reel Outside Diameter D 178 (7.008) Reel Inner Diameter D1 50.0 MIN. (1.969) Feed Hole Diameter D2 13.0 ± 0.20 (0.512 ± 0.008) Sprocket Hole Position E 1.75 ± 0.10 (0.069 ± 0.004) Punch Hole Position F 3.50 ± 0.05 (0.138 ± 0.002) Punch Hole Pitch P 4.00 ± 0.10 (0.157 ± 0.004) Sprocket Hole Pitch P0 4.00 ± 0.10 (0.157 ± 0.004) Embossment Center P1 2.00 ± 0.05 (0.079 ± 0.002) Overall Tape Thickness T 0.20 ± 0.10 (0.008 ± 0.004) Tape Width W 8.00 ± 0.20 (0.315 ± 0.008) Reel Width W1 Quantity per Reel MM (INCHES) -- 14.4 MAX. (0.567) 3000 Devices are packed in accordance with EIA standard RS-481-A. REV. 11/11 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications