BOURNS 3314R-2

T
PL
IA
N
M
CO
*R
oH
S
Features
■ Surface Mount / Single Turn / Cermet
■ Side adjust available
Industrial / Sealed
■ Compatible with surface mount
manufacturing processes
■ Compatible with popular vacuum
pick-and-place equipment
■ J-hook, gull-wing and pinned
configurations
■ Meets EIA/EIAJ/IPC/VECI SMD standard
trimmer designs
■ RoHS compliant* - see processing
information on lead free surface mount
trimmers
■ For trimmer applications/processing
guidelines, click here
3314 - 4 mm Square Trimpot® Trimming Potentiometer
Electrical Characteristics
Standard Resistance Range
.....................10 ohms to 2 megohms
(see standard resistance table)
Resistance Tolerance ........... ±20 % std.
(tighter tolerance available)
End Resistance ..... 1 % or 2 ohms max.
(whichever is greater)
Contact Resistance Variation
.................................... 3 % or 3 ohms
Resolution ................................... Infinite
Insulation Resistance ............... 500 vdc.
100 megohms min.
Dielectric Strength
Sea Level............... 500 vac (1 minute)
Adjustment Angle ................. 210 ° nom.
Environmental Characteristics
Power Rating (300 volts max. for Style G,
J & H; 50 volts max. for Style R)
70 °C .................................... 0.25 watt
125 °C ....................................... 0 watt
Temperature Range ... -55 °C to +125 °C
Temperature Coefficient ... ±100 ppm/°C
Humidity ............................90-98 % RH,
10 cycles, 240 hours
TRS ±2 %; IR 10 megohms
Vibration .....20 G TRS ±1 %; VRS ±1 %
Shock .......100 G TRS ±1 %; VRS ±1 %
Load Life
....(@ 70 °C Rated Power 1000 Hours)
TRS ±3 %
Rotational Life .......................100 cycles
TRS ±3 %
Thermal Shock .........................5 cycles
TRS ±2 %; VRS ±1 %
Physical Characteristics
Mechanical Angle ................. 240 ° nom.
Torque.............................180 g-cm max.
Stop Strength ..................300 g-cm min.
Pushover Strength (S & Z Style)
................1.6 kilograms (3.5 lbs.) min.
Weight ............... Approximately 0.01 oz.
Marking.................Manufacturer’s code,
resistance code and date code
Wiper ............... 50 % (Actual TR) ±10 %
Flammability ..........................U.L. 94V-0
Standard Packaging
J, G and R ................ 500 pcs./7 ” reel
S and Z..................... 200 pcs./7 ” reel
H....................................100 pcs./tube
Adjustment Tool..............................H-90
Product Dimensions
3314J-1
3314J-1, G-1, R-1, H-1
(Bourns Marking,
Straight Slot)
4.50
(.177)
2
2.55
(.100)
0.20
(.008)
TYP.
4.50
(.177)
3
3
1
RECOMMENDED PCB
LAYOUT
2.35
(.093)
2.3
(.091)
1.3
(.051)
2 PLCS.
0.8 ± 0.1
(.031 ± .004)
2 PLCS.
1.0
(.040)
3 PLCS.
5.00
(.197)
3
1.30 ± 0.1
(.051 ± .004)
5.00
(.197)
2.0
(.079)
3 PLCS.
2.0
(.079)
2.55
(.100)
4.50
(.177)
3
0.20
(.008)
TYP.
0.6
TYP.
(.024)
5° MAX.
TYP.
1
COMMON DIMENSIONS ALL PIN STYLES:
CROSS
2
ADJ. SLOT
2.41 LONG
(.095)
.51
WIDE
X
(.020)
.51
1
DEEP
X
(.020)
3314J-4, G-4, R-4, H-4
(Reverse Marking,
Cross Slot)
COMMON DIMENSIONS ALL PIN STYLES:
STRAIGHT
2
ADJ. SLOT
2.45 LONG
(.096)
.51
WIDE
X
(.020)
.51
3
1
DEEP
X
(.020)
2
COMMON DIMENSIONS ALL PIN STYLES:
CROSS
ADJ. SLOT
2.41 LONG
(.095)
.51
WIDE
X
(.020)
1
X
.51
DEEP
(.020)
How To Order
3314 J - 1 - 502 E
3314G-1
4.50
(.177)
2
COMMON DIMENSIONS ALL PIN STYLES:
STRAIGHT
2
ADJ. SLOT
2.45 LONG
(.096)
.51
WIDE
X
(.020)
.51
1
3
DEEP
X
(.020)
3314J-3, G-3, R-3, H-3
(Reverse Marking,
Straight Slot)
4.00
(.157)
3314J-2, G-2, R-2, H-2
(Bourns Marking,
Cross Slot)
RECOMMENDED PCB
LAYOUT
2.3
(.091)
0.8 ± 0.1
1.3
(.031 ± .004)
(.051)
2 PLCS.
2 PLCS.
2.35
(.093)
Model
Style
Standard or Modified Product
Indicator (Styles J, G, R, H & S)
-1 = Single Slot
-2 = Cross Slot
-3 = Single Slot w/Reverse Marking
-4 = Cross Slot w/Reverse Marking
Product Indicator (Style Z only)
-GA4 = Single Slot
-1 = Cross Slot
-3 = Single Slot w/Reverse Marking
-4 = Cross Slot w/Reverse Marking
Resistance Code
Embossed Tape Designator**
E = Styles J, G and R: 500 pcs./7 ” reel
Styles S and Z: 200 pcs./7 ” reel
G = Styles J and G: 3000 pcs./13 ” reel
Style R: 2500 pcs./13 ” reel
Styles S and Z: 1000 pcs./13 ” reel
**Style H is available in tube packaging only.
Standard Resistance Table
6.20
(.244)
1.3
(.051)
3 PLCS.
5.00
(.197)
1.30 ± 0.1
(.051 ± .004)
DIMENSIONS:
TOLERANCES: ±
0.25
(.010)
5.5
(.217)
2.0
(.079)
MM
(INCHES)
EXCEPT WHERE NOTED
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device
performance may vary over time.
Users should verify actual device performance in their specific applications.
Resistance
(Ohms)
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
250,000
500,000
1,000,000
2,000,000
Resistance
Code
100
200
500
101
201
501
102
202
502
103
203
503
104
204
254
504
105
205
Popular distribution values listed in boldface.
Special resistances available.
3314 - 4 mm Square Trimpot® Trimming Potentiometer
Product Dimensions
Packaging Specifications - J, G and R Styles
3314R-1
(R Style)
(J, G Styles)
2.55
(.100)
5.00
(.197)
2
6.20
(.244)
TAPE
TAPE
0.51 ± 0.13
(.020 ± .005)
TYP.
.30 MAX.
(.012)
2.74 ± 0.10
(.108 ± .004)
4.50
(.177)
3
0.51 ± 0.13
(.020 ± .005)
TYP.
1
TYP. 0.20
(.008)
2.35
(.092)
0.80 ± 0.10
(.031 ± .004)
2 PLCS.
1.30 ± 0.10
(.051 ± .004)
5.00
(.197)
DIA.
1.50 + 0.10/ - 0.00
(.059 + .004/ - .000)
4.50
(.177)
2
1
6.48 ± 0.10
(.255 ± .004)
5.26 ± 0.10
(.207 ± .004)
1.50 + 0.10/ - 0.00
(.059 + .004 - .000)
DIA.
DIA.
1.50 + 0.10/ - 0.00
(.059 + .004/ - .000)
1.75 ± 0.10
(.069 ± .004)
12.00 ± 0.30
(.472 ± .012)
REEL
1.75 ± 0.10
(.068 ± .004)
12.00 ± 0.30
(4.72 ± .012)
REEL
1.50
EQUAL SPACED 3 PLCS.
(.059)
MIN.
20.2
(.795)
MIN. DIA.
18.4
(.724)
MAX.
(MEASURED
AT
HUB)
1.50
EQUAL SPACED 3 PLCS.
(.059)
20.2
(.795)
MIN. DIA.
13.0 ± 0.51
(.512 ± .020)
DIA.
50.00
(1.969)
MIN.
18.4
(.724)
MAX.
(MEASURED
AT
HUB)
50.00
(1.969)
MIN.
0.20
(.008)
TYP.
177.8 ± 2.03
DIA.*
(7.00 ± .080)
3
1.50 + 0.10/ - 0.00
(.059 + .004 - .00)
DIA.
2.00 ± 0.05
(.079 ± .002)
5.00 ± 0.10
(.197 ± .004)
OUTSIDE WHEN
PINS ARE PARALLEL
6.30
(.248)
4.50
(.177)
5.52 ± 0.05
(.217 ± .002)
5.26 ± 0.10
(.207 ± .004)
13.0 ± 0.51
(.512 ± .020)
DIA.
3314H-1
6°±2°
8.00 ± 0.20
(.315 ± .008)
MIN.
1.3
(.051)
2 PLCS.
3.5 ± 0.10
(.138 ± .004)
4.00 ± 0.10
(.157 ± .004)
2.00 ± 0.05
(.079 ± .020)
5.5
(.216)
2.0
(.079)
5.26 ± 0.10 (J)
(.207 ± .004)
6.45 ± 0.10
(G)
(.254 ± .004)
4.00 ± 0.10
(.157 ± .004)
RECOMMENDED PCB
LAYOUT
2.3
(.090)
1.3
(.051)
2 PLCS.
DIA.
3.2
(.126)
THRU.
6.20
(.244)
R 0.13
(.005)
MAX.
TYP.
5.50 ± 0.5
(.217 ± .020)
0.25 ± 0.10
(.010 ± .004)
2.55
(.100)
2.55
(.100)
2.55
(.100)
0.6 ± 0.1
(.024 ± .004)
3 PLCS.
330.2 ± 2.0
DIA.**
(13.00 ± .079)
4.00
TYP.
(.157)
0.80
(.031)
DIA. TYP.
177.8 ± 2.03
DIA.*
(7.00 ± .080)
330.2 ± 2.0
DIA.**
(13.00 ± .079)
12.4 + 2.01/ -.000
(.488 + .079/ - .000)
(MEASURED AT HUB)
* Embossed Tape Designator "E"
** Embossed Tape Designator "G"
(See How To Order chart for further information.)
* Embossed Tape Designator "E"
** Embossed Tape Designator "G"
(See How To Order chart for further information.)
Meets EIA specification 481.
Meets EIA specification 481.
2
5.00
(.197)
12.4 + 2.01/ -.000
(.488 + .079/ - .000)
(MEASURED AT HUB)
CCW
DIMENSIONS:
WIPER
3
1
CW
TOLERANCES: ±
0.25
(.010)
MM
(INCHES)
EXCEPT WHERE NOTED
CLOCKWISE
5.00
(.197)
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
3314 - 4 mm Square Trimpot® Trimming Potentiometer
Product Dimensions
3314S-1
(Bourns Marking, Straight Slot)
Packaging Specifications
(S Style)
3314S
Common Dimensions
TAPE
1.42 ± 0.13
(0.056 ± 0.005)
2.54
(0.10)
1.27
(0.05)
1
2
5.61
(0.221)
0.50 ± 0.05
(.020 ± .002)
4.5
(0.177)
1.05
(0.041)
3
16.00 ± 0.3
(.630 ± 0.012)
ROTOR POSITIONED AS SHOWN
WITHIN ± 22 ° OF CENTERLINE
OF TERMINAL 2
7.50 ± 0.10
(.295 ± .004)
1.75 ± 0.10
(.069 ± .004)
3314S-2
(Bourns Marking, Cross Slot)
0.61
(.024)
5.01
(.197)
1.42 REF.
(.056)
4.95 ± 0.13
(0.193 ± 0.005)
3.13
(0.123)
5.81 ± 0.13
(0.229 ± 0.005)
3.30
(0.130)
1.78
(0.70)
0.50
(.020)
1
2
R
1.5 + 0.1/-0.0
(0.59 +.004/-0.0)
DIA.
12.00 ± 0.10
(.472 ± .004)
4.00 ± 0.10
(.157 ± .004)
5.5
8.3
(.217) (.327)
2.00 ± 0.10
(.079 ± .004)
3
0.5
TYP.
(.020)
ROTOR POSITIONED AS SHOWN
WITHIN ± 22 ° OF CENTERLINE
OF TERMINAL 2
7.30
(.287)
ORIENTATION
FEATURE
REEL
MIN.
RECOMMENDED PCB LAYOUT
3.5
(0.138)
1
2
1.5
DIA.
MIN.
(.059)
5.30 ± 0.10
(.209 ± .004)
3314S-3
(Reverse Marking, Straight Slot)
3
3314S-4
(Reverse Marking, Cross Slot)
20.2
(.795)
MIN. DIA.
13.0 ± 0.51
(.512 ± .020)
DIA.
1.1
(0.043)
1.2
(0.047)
1.75
(0.069)
1.15
(0.045)
1.2
(0.047)
ROTOR POSITIONED AS SHOWN
WITHIN ± 22 ° OF CENTERLINE
OF TERMINAL 2
1.50
EQUAL SPACED 3 PLCS.
(.059)
22.4
(.882)
MAX.
(MEASURED
AT
HUB)
50.00
(1.969)
MIN.
5.8
(.228)
1
2
177.8 ± 2.03
DIA.*
(7.00 ± .080)
1.15
(0.045)
1.75
(0.069)
1.6
(0.063)
330.2 ± 2.0
DIA.**
(13.00 ± .079)
16.4 + 2.0/ -.000
(.646 + .079/ - .000)
(MEASURED AT HUB)
3
ROTOR POSITIONED AS SHOWN
WITHIN ± 22 ° OF CENTERLINE
OF TERMINAL 2
2
CCW
WIPER
3
1
CW
CLOCKWISE
DIMENSIONS:
TOLERANCES: ±
0.30
(.012)
* Embossed Tape Designator "E"
** Embossed Tape Designator "G"
(See How To Order chart for further information.)
Meets EIA specification 481.
MM
(INCHES)
EXCEPT WHERE NOTED
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
3314 - 4 mm Square Trimpot® Trimming Potentiometer
Product Dimensions
Packaging Specifications
(Z Style)
3314Z
Common Dimensions
3314Z-1-(RC) E
(Cross Slot)
TAPE
1.27
(0.50)
1
2
2.54
(0.10)
1.19
(0.047)
0.40
MAX.
(.016)
3.32
(0.131)
16.00
(.630)
1.29
(0.051)
3
0.61
(.024)
5.01
(.197)
3314Z-GA4-(RC) E
(Straight Slot)
5.56
(0.219)
0.96
(.038)
3.08
(0.121)
3.18
(.125)
5.76
(0.227)
1.50 + 0.10/-0.0
(0.59 +.004/-.0)
DIA.
2
1.3
(0.051)
3
ROTOR POSITIONED AS SHOWN
WITHIN ± 22 ° OF CENTERLINE
OF TERMINAL 2
12.00
(.472)
4.00 ± 0.10
(.157 ± .004)
5.50 ± 0.10
(.217 ± .004)
2.00 ± 0.10
(.079 ± .004)
RECOMMENDED PCB LAYOUT
1
7.5
(.295)
1.75
(.069)
ROTOR POSITIONED AS SHOWN
WITHIN ± 22 ° OF CENTERLINE
OF TERMINAL 2
2.54
(0.10)
2.01
(.079)
0.26
(.010)
DIA.
5.50 ± 0.10
(.217 ± .004)
3.48
(.137)
1.50
MIN.
(.059)
5 ° MAX.
0.21
(.008)
3314Z-3
(Reverse Marking, Straight Slot)
2.01
(.079)
2.01
(.079)
5.59 ± 0.10
(.220 ± .004)
REEL
MIN.
1
2
1.50
EQUAL SPACED 3 PLCS.
(.059)
20.2
(.795)
MIN. DIA.
13.0 ± 0.51
(.512 ± .020)
DIA.
3
22.4
(.882)
MAX.
(MEASURED
AT
HUB)
ROTOR POSITIONED AS SHOWN
WITHIN ± 22 ° OF CENTERLINE
OF TERMINAL 2
2
3314Z-4-(RC) E
(Reverse Marking, Cross Slot)
CCW
50.00
(1.969)
MIN.
WIPER
3
1
CW
CLOCKWISE
DIMENSIONS:
TOLERANCES: ±
1
2
3
ROTOR POSITIONED AS SHOWN
WITHIN ± 22 ° OF CENTERLINE
OF TERMINAL 2
0.25
(.010)
MM
(INCHES)
EXCEPT WHERE NOTED
177.8 ± 2.03
DIA.*
(7.00 ± .080)
330.2 ± 2.0
DIA.**
(13.00 ± .079)
16.4 + 2.0/ -.000
(.646 + .079/ - .000)
(MEASURED AT HUB)
* Embossed Tape Designator "E"
** Embossed Tape Designator "G"
(See How To Order chart for further information.)
Meets EIA specification 481.
REV. 05/13
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.