AC AXIAL FAN 120x120x38mm FAA1-12038 Series Features: Motor: Shaded Pole Induction Motor Motor Protection: Impedance Protected Bearing Type: Two Ball, Sleeve, or Hydro Dynamic Connection: UL 1430 AWG 22, 280mm Wire Leads or Terminal Frame Material: Aluminum Alloy Impeller Material: Plastic UL94V-0 Operating Temp: Two Ball: -10°C~70°C Sleeve: -10°C~60°C Hydro Dynamic: -10°C~70°C Life Expectancy: Two Ball: 50,000 Hours Sleeve: 30,000 Hours Hydro Dynamic: 50,000 Hours Fan-S Division Model No. Volt. Freq. Current Power Rated Speed (VAC) (Hz) (A) (W) (rpm) Maximum AirFlow (CMM) (CFM) Maximum Static Pressure (InAq) (mmAq) Noise Level (dB/A) Weight (g) FAA1-12038N * H ** 31 115 50/60 0.23/0.18 17.00/14.00 2700/3000 2.348/2.674 83.0/94.5 0.330/0.350 7.620/8.890 42.2/44.5 550 FAA1-12038Q * H ** 31 230 50/60 0.12/0.10 17.00/14.00 2700/3000 2.348/2.674 83.0/94.5 0.330/0.350 7.620/8.890 42.2/44.5 550 FAA1-12038N * M ** 31 115 50/60 0.16/0.14 18.40/16.10 2600/2800 2.306/2.462 81.5/87.0 0.244/0.210 6.197/5.334 41.0/43.0 550 FAA1-12038Q * M ** 31 FAA1-12038N * L ** 31 230 50/60 0.08/0.07 18.40/16.10 2600/2800 2.306/2.462 81.5/87.0 0.244/0.210 6.197/5.334 41.0/43.0 550 115 50/60 0.10/0.09 11.50/10.35 2400/2200 2.150/1.924 76.0/68.0 0.180/0.100 4.572/2.540 40.1/37.9 550 FAA1-12038Q * L ** 31 230 50/60 0.05/0.04 11.50/9.20 2400/2200 2.150/1.924 76.0/68.0 0.180/0.100 4.572/2.540 40.1/37.9 550 FAA1-12038N * A ** 31 115 50/60 0.08/0.07 9.20/8.05 2300/1700 1.981/1.514 70.0/53.5 0.130/0.060 3.302/1.524 39.2/30.5 550 FAA1-12038Q * A ** 31 230 50/60 0.04/0.04 9.20/9.20 2300/1700 1.981/1.514 70.0/53.5 0.130/0.060 3.302/1.524 39.2/30.5 550 Noise is measured at the distance of one (1) meter from the axis of intake. * Indicates “B” (Ball Bearing), “S” (Sleeve Bearing), or “H” (Hydro Dynamic) ** Indicates “W” (Wire Leads) or “T” (Terminal) A ISO-9001 Company A Qualtek Electronics Corporation www.qualtekusa.com