FBA09A (92 X 25.5L) EMINEBEA.COM Allowable Ambient Temperature Range: Failure Rate: 10% -10°C ~ +70°C (65%RH) (Operating) -40°C ~ +75°C (65%RH) (Storage) (non-condensing environment) 50,000 Hours (40°C, 65%RH) inch Units: (mm) ÊÓ" (Pa) outlet 60 °£x 40 Ps °äÇ 20 NAME PLATE LR99935 3000 12V(24V)-H 2000 1000 N 12V(24V)-M 12V(24V)-L - Pin + Pin FLOW 3.25 (82.5) 3.62 (92) (min - 1 ) Normal Speed inlet °ÓÎ Static Pressure 1.00 .157 (25.5) .157 (4) (4) ROTATION 3.25 (82.5) 3.62 (92) .177 8 – (f4.5) (m3/min) 0 Housing with solid corner type are available. 1 2 3 ® xä £ää Air Flow .185 4 – (f4.7) 3.25 (82.5) 3.54 (90) 3.25 (82.5) 3.54 (90) INLET SIDE OUTLET SIDE Rated Operating Voltage Voltage (V) (V) FBA09A 12L 12 7.0 ~ 13.8 FBA09A 12M 12 7.0 ~ 13.8 FBA09A 12H 12 7.0 ~ 13.8 FBA09A 24L 24 FBA09A 24M 24 FBA09A 24H 24 MODEL Rotation: Clockwise Bearing: Hydro Wave Bearing 4 (f1 .09 04 ) 3.54 (90) 3.25 (82.5) 3 (f1 .94 00 ) 3.54 (90) 3.25 (82.5) .185 4 – (f4.7) Current Power Rated Speed (W)*1 (min-1)*1 110 1.32 2200 42.7 1.21 .10 150 1.80 2450 48.0 1.36 .11 255 2.70 2950 56.8 1.61 .16 42.1 14.0 ~ 27.6 80 1.92 2200 42.7 1.21 .10 14.0 ~ 27.6 110 2.64 2450 48.0 1.36 .11 14.0 ~ 27.6 140 3.36 2900 56.8 1.61 .16 42.1 (A)*1 Input Airflow Outlet: Air Out Over Struts Max. Air Flow Max. Static Noise Mass (dB)*1 (g) 25.5 27.0 110 29.4 30.0 110 35.0 110 25.5 27.0 110 29.4 30.0 110 35.0 110 Pressure CFM*1 (m3/min)*1 in H2O (Pa)*1 *1: Average Values in Free Air FEATURES Specifications of Various Sensors In Panaflo FBA series models, LOCKED ROTOR ALARM SIGNAL a locked rotor alarm sensor is Signal given when fan is running Signal given when fan is locked up Available Models Part Number Suffix available in all models. VH VH Axial models 1BS For Blowers and Crossflo fans, FBK04F S FAL S FCB S Panasonic VL V goes VL to VH VL a locked sensor can be provided as an option. 2 PULSE PER REVOLUTION SIGNAL Signal given when fan is running A pulse sensor that transmits Signal given when fan is locked up A VH VL 1 Revolution 2PPR Part Number Suffix Axial models except: FBK04F FBA06T FBA08T FCB FAL 1BX B Lock VL Available Models If fan locks on VH, signal stays locked. If fan locks on VL, signal stays at VL for a few hundred MS, then moves to VH. (A:B ˜1:5; A ≥ 100MS) signals when the motor rotates is also available as an option. The 2 pulse per revolution sensor output is available in all FBA Series models except the 15 mm “T” versions. Panaflo Built-in Connector System Lead Wire Connectors: Style: MASS TERMINATION (standard) AMP P/N 173977-3 CRIMP TYPE (this style is a 2 piece assembly) AMP P/N 175778-3 (housing) AMP P/N 175102-1 (terminal) Notes: •Connector style effects lead wire guage. Please refer to fan specs for further details. • All axial fans except the FBA06T, FBA08T and FBKO4F versions come standard with the mass termination connector. The FBA06T, FBA08T and FBKO4F fan leads are connected directly to the PC board in the fan assembly. • All FCB Crossflo models and FAL Blower fan leads are soldered directly to the PC board in the fan assembly. 2 High Reliability with HWB (Hydro Wave Bearing) Radial Direction Axial Direction shaft thrust plate bearing (b) HWB Figure 1: Pressure distribution in each load direction. washer HWB thrust plate stop ring shaft Figure 1: Construction of HWB Panaflo’s unique hydrowave bearing (HWB) addresses the traditional weakness of sleeve bearings…axial friction. By utilizing our unique HWB system, the thrust plate “floats” on a circulating film of oil, which greatly reduces the axial friction and the bearing’s deterioration. The HWB pattern on the bearing virtually eliminates thrust plate contact which is depicted above. As the shaft rotates it acts as a pump constantly circulating the oil in the radial, as well as the axial direction. The sealed system and reservoirs of oil maintain the proper lubrication to minimize mechanical contact and prolong the fan’s life expectancy. The radial direction analysis shown above is essentially the same as a traditional sleeve bearing. Panasonic’s unique HWB reduces the axial contact. 3 COMMON SPECIFICATIONS Protection • Locked rotor protection circuits • Automatically restarts in a few seconds • Reverse voltage protection Insulation Resistance Panasonic • 10M Ω minimum at 500v DC (frame to leads) Dielectric Strength • 500v AC (50/60Hz) for 1 minute (frame to leads) Plastic Rating • All Panaflo fans are manufactured with a UL94V-0 plastic (flammability) Insulation Class Noise Data • JIS Class E (120° C) • VDE Class E (90° C) • UL Class A (105° C) Microphone • CSA Class A (105° C) Noise Data The noise data is measured at 1 meter from the air intake side of the fan Microphone suspended in a semi-anechoic chamber (background noise 13dB-A max.). Construction with and without Solid Corner Housing Microphone * Distance 1m. Panaflo fans are available in two different versions for mounting: with solid corner housing and without. Specific mounting methods and applications require the use of solid corners. Select the appropriate housing for your application. Some models may be available only with solid corner housing. For details, please refer to the corresponding page for each model. With Solid Corner 4 Without Solid Corner PANAFLO FAN PRODUCT DESIGNATION CODE Panaflo Fan F B A O 8 A 1 2 H 1 A S Housing Size Rated Voltage 04: 40 x 40mm 06: 60 x 60mm 08: 80 x 80mm 09: 92 x 92mm 12: 120 x 120mm 12: 12 VDC 24: 24 VDC 05: 5 VDC Motor Type FB: Panaflo (DC Axial-flow fan) Option 1: With leads : No leads S: Locked rotor alarm sensor Z: Solid corner housing X: 2 PPR speed sensor (TAC Output) O: S + Z 1: Hub mounted thermal sensor (variable) Speed L: Low M: Middle H: High U: Ultra High V: Variable (Option) Bearing Type A: HWB (Hydro Wave) K: Ball Bearing (40mm Only) Terminal (FBA Only) Housing Thickness A: 25.5mm T: 15mm (Thin) G: 38mm F: 20mm Lead Wire (FBA Only) A: Standard 2 leads (GND, PWR) B: Standard 3 leads (GND, PWR, Signal) C: 3rd lead thermal sensor (variable) Crossflo Fan F C B 3 4 A D 2 4 S Fan Outside Diameter Rated Voltage 34: Ø34 mm Fan Motor Length Motor Type 12: 12 VDC 24: 24 VDC AA: 134.50mm AB: 173.50mm AC: 212.50mm AD: 251.50mm AE: 290.50mm AF: 329.50mm FCB: Brushless Crossflo Fan Option S: Locked rotor alarm sensor Blowers F A L 6 F 1 2 L H S Model Change Blower Size Motor Type FAL: Brushless Fan 3—50 x 50mm (Ball Bearing) 5—76 x 76mm (Hydro Wave) 6—109 x 114mm (Hydro Wave) Rated Voltage Option 05: 5 VDC 12: 12 VDC 24: 24 VDC S: Locked rotor alarm sensor Speed LL: Low Speed LH: High Speed 5 Type and Size FBK04F FBK04F05L 40mm Rated Voltage (V) Operating Voltage (V) Rated Current (mA) Rated Input (W) Nominal Speed (r/min) 5 4.5—6.0 120 0.60 4700 Maximum Air Flow Maximum Air Pressure (m3/min) (CFM) (mmh20) (Pa) 0.11 3.9 2.50 24.5 Noise (dB-A) Safety Standard UL CSA 24.0 • Locked Rotor Alarm Sensor • FBK04F05H 5 4.5—6.0 280 1.40 7500 0.19 6.7 6.60 64.7 33.0 • • DC axial fans FBK04F12L 12 7.0—13.8 75 0.90 4700 0.11 3.9 2.50 24.5 23.0 • • FBK04F12H 12 7.0—13.8 150 1.80 7500 0.19 6.7 6.60 64.7 32.0 • • FBK04F12U 12 7.0—13.8 170 2.04 9500 0.26 9.2 12.00 117.7 42.0 • • FBK04F24H 24 14.0—27.6 92 2.21 7500 0.19 6.7 6.60 64.7 33.0 • • FBK04F24U 24 14.0—27.6 100 2.40 9500 0.26 9.2 12.00 117.7 42.0 • FBA06A FBA06A12L1A 12 7.0—13.8 110 1.32 3200 0.40 14.1 3.10 30.4 24.0 • • • 60mm FBA06A12M1A 12 7.0—13.8 130 1.56 3700 0.47 16.6 3.95 38.7 28.0 • • • DC axial fans FBA06A12H1A 12 7.0—13.8 170 2.04 4200 0.54 19.1 5.20 51.0 32.0 • • • FBA06A12U1A 12 7.0—13.8 210 2.52 4550 0.58 20.5 6.0 58.0 37.0 • • • FBA06A24L1A 24 14.0—27.6 70 1.68 3200 0.40 14.1 3.10 30.4 24.0 • • • FBA06A24M1A 24 14.0—27.6 90 2.16 3700 0.47 16.6 3.95 38.7 28.0 • • • FBA06A24H1A 24 14.0—27.6 105 2.52 4200 0.54 19.1 5.20 51.0 32.0 • • • FBA06T FBA06T12L 12 7.0—13.8 88 1.06 3200 0.34 12.0 2.80 27.5 24.0 • • • 60mm FBA06T12H 12 7.0—13.8 145 1.74 4200 0.47 16.6 4.75 46.6 32.0 • • • Thin FBA06T24L 24 14—27.6 56 1.34 3200 0.34 12.0 2.80 27.5 24.0 • • • Panasonic DC AXIAL FANS 28 Model • FBA06T24H 24 14—27.6 83 1.99 4200 0.47 16.6 4.75 46.6 32.0 • • • FBA08A FBA08A12L1A 12 7.0—13.8 68 0.82 1900 0.68 24.0 1.57 15.4 21.0 • • • 80mm FBA08A12M1A 12 7.0—13.8 124 1.49 2450 0.91 32.1 2.51 24.6 28.0 • • • DC axial fans FBA08A12H1A 12 7.0—13.8 173 2.08 2950 1.12 39.6 3.78 37.1 32.0 • • • FBA08A12U1A 12 7.0—13.8 270 3.24 3450 1.33 46.9 4.80 47.0 38.2 • • • FBA08A24L1A 24 14—27.6 54 1.30 1900 0.68 24.0 1.57 15.4 21.0 • • • FBA08A24M1A 24 14—27.6 71 1.70 2450 0.91 32.1 2.51 24.6 28.0 • • • FBA08A24H1A 24 14—27.6 105 2.52 2950 1.12 39.6 3.78 37.1 32.0 • • • FBA08T FBA08T12L 12 7.0—13.8 79 0.95 2000 0.62 21.9 1.55 15.2 23.0 • • • 80mm FBA08T12H 12 7.0—13.8 200 2.40 3100 0.95 33.5 3.20 31.4 34.0 • • • Thin FBA08T24L 24 14—27.6 47 1.13 2000 0.62 21.9 1.55 15.2 23.0 • • • FBA08T24H 24 14—27.6 110 2.64 3100 0.95 33.5 3.20 31.4 34.0 • • • FBA09A FBA09A12L1A 12 7.0—13.8 110 1.32 2100 1.21 42.7 2.30 22.6 27.0 • • • 90mm FBA09A12M1A 12 7.0—13.8 150 1.80 2450 1.36 48.0 3.00 29.4 30.0 • • • DC axial fans FBA09A12H1A 12 7.0—13.8 225 2.70 2850 1.61 56.8 3.98 39.0 35.0 • • • FBA09A12U1A 12 7.0—13.8 430 5.16 3450 1.95 68.8 5.0 49.0 43.0 • • • FBA09A24L1A 24 14—27.6 80 1.92 2100 1.21 42.7 2.30 22.6 27.0 • • • FBA09A24M1A 24 14—27.6 110 2.64 2450 1.36 48.0 3.00 29.4 30.0 • • • FBA09A24H1A 24 14—27.6 140 3.36 2850 1.61 56.8 3.98 39.0 35.0 • • • FBA12G FBA12G12L1A 12 7.0—13.8 180 2.16 1700 1.95 68.9 3.30 32.4 30.0 • • • 120mm FBA12G12M1A 12 7.0—13.8 340 4.08 2100 2.45 86.5 4.80 47.1 35.5 • • • DC axial fans FBA12G12H1A 12 7.0—13.8 460 5.52 2500 2.94 103.8 6.80 66.7 41.5 • • • FBA12G12U1A 12 7.0—13.8 510 6.12 2750 3.25 114.7 8.0 38.0 45.5 • • • FBA12G24L1A 24 14—27.6 110 2.64 1700 1.95 68.9 3.30 32.4 30.0 • • • FBA12G24M1A 24 14—27.6 160 3.84 2100 2.45 86.5 4.80 47.1 35.5 • • • FBA12G24H1A 24 14—27.6 230 5.52 2500 2.94 103.8 6.80 66.7 41.5 • • • Type and Size FCB34 Model FCB34AA12 Rated Voltage (V) Operating Voltage (V) Rated Current (mA) Rated Input (W) Nominal Speed (r/min) 12 10.2—13.8 165 1.98 2800 Maximum Air Flow Maximum Air Pressure (m3/min) (CFM) (mmh20) (Pa) 0.32 11.3 1.30 12.7 Noise (dB-A) Safety Standard UL CSA 38.0 Locked Rotor Alarm Sensor • 12 10.2—13.8 340 4.08 3300 0.61 21.5 3.00 29.4 42.0 • FCB34AC12 12 10.2—13.8 375 4.50 3100 0.80 28.2 2.00 19.6 42.0 • FCB34AD12 12 10.2—13.8 415 4.98 3000 0.96 33.9 1.90 18.6 42.0 • FCB34AE12 12 10.2—13.8 430 5.16 2900 1.14 40.3 1.90 18.6 42.0 • FCB34AF12 12 10.2—13.8 440 5.28 2800 1.22 43.1 1.85 18.1 42.0 • FCB34AA24 24 20.4—27.6 110 2.64 2800 0.33 11.7 1.50 14.7 39.0 • FCB34AB24 24 20.4—27.6 165 3.96 3300 0.64 22.6 2.40 23.5 42.0 • FCB34AC24 24 20.4—27.6 200 4.80 3100 0.80 28.2 2.00 19.6 42.0 • FCB34AD24 24 20.4—27.6 210 5.04 3000 0.95 33.5 2.00 19.6 42.0 • FCB34AE24 24 20.4—27.6 230 5.52 2900 1.10 38.8 2.10 20.6 42.0 • CROSSFLO Crossflo Fans FCB34AB12 FCB34AF24 24 20.4—27.6 250 6.00 2800 1.15 40.6 2.20 21.6 42.0 • • • FAL3F FAL3F05LH 5 4.5—6.0 205 1.64 4400 0.112 3.95 8.1 79.4 28.5 • • • Blowers FAL3F05LL 5 4.5—6.0 380 1.90 5400 0.140 4.94 15.4 151 36.0 • • • FAL3F12LL 24 7.0—13.8 111 1.33 4400 0.112 3.95 8.4 79.4 28.5 • • • FAL3F12LH 12 7.0—13.8 185 2.22 5200 0.138 4.87 15.0 151 35.0 • • • FAL3F24LH 24 14.0—27.6 105 2.52 5200 0.138 4.87 15.0 151 35.0 • • • BLOWERS FAL5F FAL6F FAL5F12LH 12 7.0—13.8 200 2.40 2900 0.30 10.6 10.00 98.07 36.0 • • • FAL5F24LH 24 14—27.6 100 2.40 2900 0.30 10.6 9.70 95.12 36.0 • • • FAL5F12LL 12 7.0—13.8 140 1.68 2400 0.25 8.83 6.20 60.8 30.0 • • • FAL5F24LL 24 14—27.6 70 1.68 2400 0.25 8.83 6.30 61.8 30.0 • • • FAL6F12LL 12 7.0—13.8 280 3.36 2100 0.53 18.7 11.25 110.3 40.0 • • • FAL6F12LH 12 7.0—13.8 500 6.00 2550 0.65 23.0 18.00 176.5 45.0 • • • FAL6F24LL 24 14—27.0 155 3.72 2100 0.53 18.7 11.50 112.8 40.0 • • • FAL6F24LH 24 14—27.0 295 7.08 2550 0.67 23.7 19.70 193.2 45.0 • • • 29